install the drivers for the burner viking drive

Similar Questions

• My CD/DVD drive no longer works after installing an update for Roxio Burn, (it was working perfectly until after the update).

  Hi, my CD/DVD drive has stopped working after I installed an update for Roxio Burn. I tried uninstalling and reinstalling, updating all windows and my device driver programs, but I just comes up with one, "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ', warning. The DVD/CD player that I use is called TSST corp DVD +-RW TS - H653G

  Hello

  Code 39 means that the driver is corrupted or missing.

  Having too many CD/DVD programs can cause strange problems, especially if they're loading of parts of them.
  Selves at the start because they will be competing for resources. This does not mean that this problem was caused by
  These however is a possibility depending on which and how many you have installed.

  Definitel check with the help of Roxio and their forums - you may need to uninstall Roxio to see if this
  allows the reader to work (not re - install until the issue is resolved).

  -------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Buning CD error: "Windows Media Player cannot burn the files. ... Install the latest device driver"

  original title: when I try to burn a cd, I get the following message

  When I try to burn a cd, I get the following message: "Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. "I just burn a cd of two days using a blank of the same pack then, what's the problem?  I installed itunes.  Could be the problem?

  Hi AnnaMiller,

  You can try reducing the burn speed to see if that solves the problem.

  1 open Windows Media Player

  2. click on the burn tab

  3. click on the burn icon options (windows with the box on the right)

  4. Select burn more options...

  5. click on the burn tab

  6. in the general section, change the burn speed.

  7. click on apply

  8. click on OK

  
  

  If this does not resolve the problem, make sure you have the latest drivers for your DVD drive. You can locate the drivers on the Technical Support Web site of the manufacturer of your computer.

  1. download the driver from the manufacturer's website and save it to your desktop so that it is easy to locate.

  2. click on Start

  3. right click on computer

  4. Select Manage

  5. Select Device Manager

  6. develop CD-ROM/DVD-ROM readers

  7. right click on your device

  8. Select Properties

  9. Select the driver tab

  10. click on set to update driver

  11. Select Browse my computer for driver software

  12. click on Browse > Desktop > and then select the file that you saved

  13. click OK

  14. click Next

  
  

  You can also run the Media Player troubleshooting utility to reset the media player to its default settings.

  1. click on Start

  2. click on Control Panel

  3. Select Troubleshooting

  4. Select programs

  5. Select the Windows Media Player settings

  6. click Next

  7. Select apply this hotfix

  8. follow the remaining instructions.

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installed the new hard drive and now can't activate Widnows 7 as it says not valid for clean installation

  This computer is having problems and we tried to upgrade to Windows 7 hard drive crashed.  We installed the new hard drive.  Now, we try to activate this copy but code comes up saying invalid for a clean install.  We need to have some new code or just get ours to work.

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• HP Pavilion DV6-6c35dx: potential problems with OS driver install the new hard drive?

  I want to spend the hard drive of my laptop, but my laptop did not come with recovery discs. I buy a full copy of Windows 7 Professional, but I did save it... because when everything has failed, I guess. If I'm able to reinstall Win 7 Home or if I have to install Win 7 Pro, how can I be sure to reinstall all drivers HP (p. ex., trackpad, meaning cool, beats audio, etc.) for my machine? It is best to download the drivers before you install the new hard drive and have them ready on a flash drive. or is there an easier way? Thank you.

  I personally prefer the new OEM installation & then get required drivers to download for HP support for your laptop model.

  It is slower and more difficult to do if it is not too well known, but the end result is much better.

  If your system has flaws you should try to fix first, but better long-term results come from clean install generally.

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• XPS 15 (L502X) - disk HARD death - where can I get the Windows7 DVD to install the new HARD drive?

  Hello
  I have a XPS 15 / L502X 2011 - dead HDD now - and I installed a disc SSD - BUT where/HOW to get the Windows Installer DVD for my PC.
  Can not get with the old drive - I did a Rep old installtion disk - and I DO not think that this contained the windows and drivers for my DELL.
  But it doesn't! :-/

  How now to install the new HARD drive on my dell? Anyone?

  BR
  René

  ROFMAN

  If you are a resident of the United States and are the registered owner of the computer, a disk that contains the operating system specific to your system factory installed can be requested HERE.

  Note: Dell may charge for the disc.

  If you do not live in the United States, contact the Dell Technical Support which is in your country.

  Bev.

• I CAN NOT INSTALL THE VGA INTEL DRIVER AND CANNOT ADJUST THE BRIGHTNESS

  I have HP COMPAQ 41 224tx, with windows 7 ultimate 64-bit

  I have just updated to windows 7 32-bit basic family.

  and install all the drivers like ussually, but I can't change my brightness

  and worse, I can not install the vga driver intel.

  because I can install it when I use 32-bit windows

  Please help me

  I'm sorry, my language is bad

  Indonesian IM

  It's weird.

  My last suggestion and I hope it works for you, install the amd driver directly from AMD and see if it works better than the one on the support page and the driver of your PC.

  http://support.AMD.com/en-us/download/desktop/legacy?product=legacy2&OS=Windows 7-64

  Also, try to install the latest chipset driver and see if that works too.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+installation+utility&lang=eng

• Satellite A300-RJ1 - cannot install the new graphics driver from Intel page

  Hello.

  Another problem.
  When I use the "integrated" Vista, I can not install the new graphics driver (intel inside).
  Whenever the error message: the driver is not validated by your system, please contact your producer.

  So if I install a clean windows, so I can install the new graphics driver: S and I want to install because it is much more recently than the preinstalled :(

  Hi mate

  You can install this driver, but you need to use different installation procedure.
  You must install it in the Device Manager.

  Here, you can choose Advanced Setup, then choose don't search. I will choose the driver, then point to the driver files that you have stored on the HARD disk and complete the installation.

  But note; I read here that the use of non-Toshiba drivers is always at your own risk

• HP EliteBook 8440p: Best boot option after installing the new hard drive and put to memory.

  I just installed the new hard drive for my laptop and will get the cards of two memory installed tomorrow. I would like advice on what would be the best option to start when the laptop for the first time I'm on fire.

  I have the original Windows HP recovery disk came with the computer.

  I also have a recovery disc and a system image on disks created with Macrium Reflect two days ago.

  I also have a recovery disc and a system image is created on an external hard drive Seagate two days ago. (I've read mixed reviews on these is currently working as a media of rescue with Win7 Pro).

  I guess if I use the HP recovery disc I would be then just use any system image I prefer, without the recovery disk. Anyone know if it makes a difference at all which method to use?

  bozzle73

  My recommendation would be to restore using the image of MR (Macrium Reflect) you did.

  But then, I used Mr. on all my PCs for years and am a big fan - having had it Miss ever in the years and years of use.

  You will need boot from the boot of MR media (you did that right) and, if you photographed all the required partitions for the operating system, restore it on the new drive should take a few minutes, and when this is done, you reboot and everything should be OK.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• My MBP in trouble after installing the Wacom Intuos driver.

  My MBP takes almost 5 minutes to start after installing the Wacom Intuos driver, I remove and reinstall but no change!

  and it seems that the machine was very unstable and very slow, sometimes the beach ball appears and no response for a few minutes and works again!

  I try to contact Wacom support in Hong KONG but still no body to answer my call...

  Can be resolved by upgrading to IE captain? Thank you very much!!!

  Wacom driver: 6.3.15 - 1

  News by cheque to be:

  EtreCheck version: 2.6.6 (226):

  MacBook Pro (13 inch, late 2011)

  MacBook Pro - model: MacBookPro8, 1

  1 2.4 GHz Intel Core i5 processor: 2 strands

  4 GB of RAM expandable

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 87 - SN = W01457N9TD3BA

  Intel HD Graphics 3000 - VRAM: 384 MB

  Color LCD 1280 x 800

  OS X Mavericks 10.9.5 (13F1507) - since the starting time: 4 hours

  Disc information:

  HGST HTS721010A9E630 disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  1 t MBP (disk0s2) /: 999,35 go-go (590,22 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ - 8À8)

  Configuration files: (Does that mean?)

  / etc/hosts - Count: 57

  Startup items: (Does that mean?)

  PenTabletDriver: Path: / Library/StartupItems/PenTabletDriver

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  [loading] com.apple.RemoteDesktop.plist -invalid signature!

  [loading] com.apple.screensharing.MessagesAgent.plist -invalid signature!

  Top of page process CPU: (Does that mean?)

  55% mdworker (3)

  4% kernel_task

  4% WindowServer

  2% fontd

  2% hidd

  MacBook Pro, OS X Mavericks (10.9.5)

  Speed up boot times-

  Start time - speed (2)

  Start time - speed (3)

  file/etc/hosts - fixing a pirate

  You might also consider adding more RAM. 2 places I've seen recommended more to buy reliable RAM are below. I have bought RAM several times to other World Computing and have always been very satisfied with the product and the service. They have instructions online on how to replace the RAM. OWC has also tested the RAM above what Apple says, it is the maximum. Now, I have 6 GB installed on an iMac 2008 so-called beginning limited to 4 GB and noticed an improvement.

  Crucial

  Other World Computing

• What do I need install the second hard drive HP PAVILION: p6633w

  What do I need install the second hard drive HP PAVILION: p6633w?

  donp815 wrote:
  

  What do I need install the second hard drive HP PAVILION: p6633w?

  Hello

  You need two cables, one is a sata cable:

  http://www.play.com/PC/PCs/4-/30305659/706331346/STARTech-com-6in-SATA-to-right-angle-SATA-serial-ATA-cable-female-SATA-female-SATA-6-inch-red/ListingDetails.html?_%24JA=TSID:13315% 7Ccat: 30305659% 7Cprd: 30305659 & kw = {keyword}

  This cable is only for data and connect the hard drive to the SATA connector on the motherboard.

  The other cable is energy:

  http://www.itpartsdirect.com/STARTech-15-24cm-4-pin-Molex-to-SATA-power-cable-adaptor.html

  It connects the hard drive to the PSU.

  You can also buy a combo like this cable:

  http://www.Amazon.co.UK/DP/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4

  All you have to do is to connect the hard drive and that's it. Make sure that the main drive with the operating system is connected to the primary SATA connector (I think there are the numbers 1, 2, 3...)

• When I plug my new Seagate Free Agent Desk GoFlex external drive, I get an error message saying that Windows does not recognize the hardware. I'm stuck and need help to install the external hard drive.

  My problem is that the software is supposed to be on the disk but I do not see the player to download. I tried to download the Seagate Manager, but it shows no available disks. Any help will be most appreciated.

  Also, I tried to install the external hard drive on a Windows Vista 64-bit computer and a Windows 7 Home Premium 64-bit.  Same result on both.

  Hello

  I suggest you try to run this under fixit and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  It will be useful.

• Dell Vostro 3550 (core i5), impossible to install the Radeon AMD driver

  Dear concern,

  When I try to install the Radeon AMD driver it does not appear compatible hardware found! But I see in the dell drivers Download Center there's AMD Radeon drivers!

  So, my laptop does not support the driver AMD Radeon! Help, please.

  Thank you.

  Look in the Device Manager - if you see two video cards listed, you do not have the AMD GPU.  If you see only one (Intel), you have only an Intel GPU.

  This system was sold with Intel only (base model) and hybrid systems (upper range models) Intel/AMD GPU.