Install the new video card
I have a HP Pavilion m7500y PC running Windows XP. I would like to install a new video card to display on both monitors. Installing a video card is possible with this machine? The card I have has a VGA, HDMI and a DVI input connection. If possible, do I need anything special to install and use this card? Thank you for your help.
I wouldn't worry the food until the video card is selected. Decide if a new power supply is needed. Many new cards high power have a 'special' which will have all the power supplies. According to the map, adapters for power fittings may come with the card. A respected power supply name is Cosair, Antec, or Thermalake, but many are just as reliable at the best prices.
Tags: HP Desktops
Similar Questions
-
Pavilion Slimline s3120N will not recognize the new video card
I can't get my computer to recognize and use a new video card. I tried 3 cards (GeForce 8400GS... cards 2different and Radeon HD 4550). The computer continues using the onboard video. For each card, I did the following:
Go to configuration, advanced and changed the main graphics card 'on board' to 'PCI-E '.
Saved and let the computer start.
Stop and insert the new video card into the PCI-E slot
Start the computer and installed the latest driver
Computer restarts
No matter what I do, it always uses the embedded video. I am running Windows 7 Home Premium. How can I use the PCI-E slot/video card? Any suggestions?
I think that your problem may be the power supply unit (PSU). The video card that you have installed require a minimum of 300W/350W. The power supply of your computer is perhaps only 180W; 220W at the most. You can check by opening the case and by reading the label on. It's just too much difference for the card to function properly.
-
Windows blocked key after installing a new video card and hard drive.
I got a copy of Windows 7 Ultimate 64 - bit edition since the early release, purchased through Newegg. Since then, I used it on my desktop, which I update regularly. I changed the hard drives, processors and cards video several times and reactivated without a problem, but this last Friday, I installed a new video card and the DSS, and when I went to activate windows told me that my key was blocked without any explanation. I can only assume that this is because I changed my hardware configuration. My copy of windows remained only on this computer over the years. Here are the results of MGADiag running on my system.
If there is any question about the legitimacy of my copy, I have the DVD, booklet, cases, cardboard sleeve he shipped initially and purchase of invoices from Newegg on the spot.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Code of Validation caching online: 0x0
Windows product key: *-* - D8YP8 - 79HTV-2GFQT
Windows product key hash: OHt9YSDSzhyPDA0DedmCR0Hfwj8 =
Windows product ID: 00426-OEM-9154261-98225
Windows Product ID Type: 3
Windows license Type: OEM System Builder
The Windows OS version: 6.1.7600.2.00010100.0.0.001
ID: {6702320D-40F0-4FC3-A8FA-60775C31A418} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7600.win7_gdr.130104 - 1435
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{6702320D-40F0-4FC3-A8FA-60775C31A418} 1.9.0027.0 6.1.7600.2.00010100.0.0.001 x 64 *-*-*-*-2GFQT S-1-5-21-605449622-1443938486-2400767939 00426-OEM-9154261-98225 3 MICRO-STAR INTERNATIONAL CO., LTD MS-7577 American Megatrends Inc.. V1.6 20090924000000.000000 + 00011B83607018400FA 0409 0409 Mountain Standard Time(GMT-07:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7600.16385Name: Windows 7 Ultimate edition
Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
Activation ID: cfb3e52c-d707-4861-af51-11b27ee6169c
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00426-00182-542-698225-02-1033-7600.0000-0742013
Installation ID: 013213720201413403062894943331046813518366624835351974
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: 2GFQT
License status: initial grace period
Time remaining: 38700 minute (s) on (26 day (s))
Remaining Windows rearm count: 3
Trust time: 18/03/2013 20:21:46Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 3:16:2013 05:01
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: OgAAAAEABgABAAEAAAADAAAAAgABAAEAln2G8G4eCIVU0Mj/jDUQM1TyRGN6mFKayIqLyP7M7AmOLg isActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC 7577MS A7577100
FACP 7577MS A7577100
HPET 7577MS OEMHPET
MCFG 7577MS OEMMCFG
LASRYVITRAGE 7577MS A7577100
SSDT A M I POWERNOWHave you tried to restart by phone?
How to activate Windows 7 manually (activate by phone)
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) select your "country" in the list.
(4) choose the option "activate phone".
(5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
(6) explain your problem clearly to the support person.
http://support.Microsoft.com/kb/950929/en-us -
Computer does not start with the new video card
Hello
I have hp pavilion 500-277cb and I love it, but it won't work with my new video card
The video card is
Sapphire ATI over-pants 2460I heard 6 beeps and I turned off safe and active start legacy. It does not beep, but it is not start either, just black screen.
It seems to me to have the latest version of the bios and windows 8
What can I do else?
Thank you very much
Best,
Korhan
Hi JM,
Did you remove the Intel HD graphics drivers prior to installing the ATI graphics card?
Your PC comes with one of the following built-in Intel graphics drivers:
- Graphics Intel HD 4400 (GT2)
-
Is satellite A10 - possible to install the new graphics card?
Hello
I have a videocard Satelite A10, 2.2 Ghz, 712 MB of RAM, provided with your computer.
I just bought the Sims 2 and thought from the specifications that I would be able to play on my current card. However when I try to run it it gets to the intro screen and then hangs when it is ready to go into the Menu. My first impressions are that I don't have a pretty good graphics card.
I need a 32 MB T & L capable card so can someone confirm if this is why it would not work on the system.
If that's the case I'm looking to see if it is possible to install a new graphics card on the machine I want to play more games to date.
the map I'm looking at is Sapphire ATI Radeon 9600 XT 256 MB AGP8X graphics card. It will work on the machine and it is likely to solve my problem?
Thank you
HI Jeff,
In General, it is not possible to change the graphics card in your laptop. This is because the graphics cell are generally not a component separated (as with a normal PC), but generally a specific graphic chip attached to the motherboard so make the graphics a part of the laptop.
At the same time, the graphics driver is normally a specially modified version will omit some of the more esoteric aspects of the normal driver to minimize the risk of overheating chip since it does not have its own cooling system. Given this, you will find probably than trying to load the latest graphic website manufacturers drivers (Nvidia, ATI, etc.) will not work, and you will therefore be limited to these pilots provided by Toshiba on their Web site.
In order to get your copy of the SIMS 2 to run you need to omit or reduce some of the graphics settings in the game itself, or alternatively, you can try to use some of the graphics third-party drivers that are written to provide some of the omitted features of the original notebook drivers. Note that if you do that there is no guarantee that they won't cause your overheating graphics chip, even if I used the ATI Omega drivers for some time now without any problems. You can get them: -.
http://www.OmegaDrivers.NET/
Kind regards
-
H8 1241: problems with the new video card on h8 1241
OK, I've seen a lot of posts on this topic, but I couldn't find anything yet. I bought this computer as a windows 7, but have just upgraded to windows 10. The stock video card HDMI port came out, so I ordered an ASUS Geforce gtx 750ti to replace.
http://www.Amazon.com/GP/product/B00IB9P1KG?PSC=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
When I try to boot with the new card I get the blue screen that tells me to Press esc to get into the BIOS, but it is freezing it (I am not able to get into the bios).
Currently, the only way to make changes are re - insert my old card. I can not even start without secondary card by using the on-Board (which could as a result of the changes that I made in the BIOS). Most of the solutions I've seen involved changes in version 8 of the BIOS but I can't get that. I tried to update my BIOS to the latest version for windows 7, but I don't think it worked b/c I am on windows 10 now.
Help, please!
Hello
The level of your PC motherboard BIOS is not compatible with the cards NVIDIA GXT 7xx series.
Contact ASUS to obtain redress. ASUS has maybe a video BIOS update or a different graphics card that will work in your PC.
A NVIDIA GTX 660 new or used may be your best bet.
Thanks for posting on the forum.
-
310 - 1125y in expansion with the new video card?
I have a HP all-in-one TouchSmart 310-1125y and would like to know if this PC support the installation of a new video card. It comes with an integrated ATI Radeon HD 4270 support. I did some research and have the impression that this PC is not particularly expansive. Thanks in advance for your help.
Here are the specifications of your desktop HP TouchSmart 310-1125y and its custom Quanta DA0NZ2MB6A0 (HP Aronia) motherboard. According to the specifications, there is no provision for the installation of a new video graphics card.
Frank
-
Windows XP Home Edition. Motherboard ASUS P4PE. (Old) NVIDIA geforce4 TI 4400 failed - video card replaced by Prowler Radeon 7000 64 MB agp (Mad Dog). The black screen with the old card and bought a new one. At out the old card and installed a new. Start the computer and graphics were. With Nvidia drivers installed, display settings could be changed. Device, 'Monitor' Manager showed now default monitor instead of good Sony monitor. Remove all drivers video and rebooted. Screen "new hardware found" appeared, but I couldn't get the new drivers loaded. I inserted the disc by the manufacturer, but the pilots has not can be detected. Has attempted to launch "Setup" on the disc, but received a material not found error message. Yellow mark points to "Other devices" and the hyphen "VGA Display adapters". No 'monitor' in Device Manager. Tried to turn off the windows firewall and Virus software. I tried windows update. Still have a problem. What's wrong?
The old drivers must remove the first test pilot seeper guru3d.
The nvidia Setup program should find the material but otherwise download the latest version of the software from their Web site. They must be the pilot, right down to the revision number, not only the model number.
-
Install the removed video card speaker
I have a graphic card Radeon 7770 installed in my system which is a former Vista but upgraded to the Op win7 system. The first step in the installation of the graphics card was to remove the video driver (a built-in Nvidia driver). I think this has also removed the audio driver because now the only audio selection is HDMI (6 ports) and the speakers do work not on the audio input jack. I'm worried about the driver installation audio back as it can install a video driver that will conflict with the AMD video driver installed with the new card. I tried to install a new device, but the port or the speakers are not recognized. The speakers are working and power but no output and the system does not recognize that they are there.
There are several possible nVidia drivers and little concern the video card. You have deleted the nForce chip set drivers nVidia, which can contain some sound card drivers. No further details on the number of model for system / motherboard, your only option is to re - install the nVidia drivers.
-
I just bought the Skyrim game and want to play on an old PC. I don't know what product I'm looking, maybe a new diet, but also a graphics card.
Here are the details... hope this is enough information:
HP Pavilion A6403W
Windows XP
Intel (R) Pentium (r) Dual CPU
E2160 @ 1.80 GHz
1.80 GHz 1.87 GHz of RAM
Motherboard: Asus A8AE - THE
PCI BUS
250w PSU
From what I read it is open 16-bit PCI location
All advice and/or the name of the specific product would be greatly appreciated.
Thank you
Hello
Look over hererecommended system configuration. Your PC adapts to the minimum but not the recommended configuration. Even in this case, you'll need a big discrete video card and a new PSU power supply. If the game works even evil would then require more memory and a faster processor.
The adjacent slot on the PCI-E x 16slot must be vacant.
-
The installation of a new Sim Card would affect the ability to unlock Remote Activation?
I bought a used iPhone 4s, prechecked IMEI number, which indicated that it was not stolen, but I had no idea on the lock activation. Former owner is willing to work, but can't figure out what to do (I emailed the help pages Apple), would be the fact that I have installed the Sim Card have affected something
Locking activation is a feature of security built into iOS. Please seethis support document to learn more about locking Activation.
My suggestion would be to contact the original owner and ask him to enter the identifier Apple and password so that you can disable find my iPhone.
I hope this helps.
-
Put the new video card into m9000 with an edge
I need this m9000 to be able to output to two screens (where the office is extended and the mouse moves between). It has an integrated video card, so I guess I'd need to purchase and install a separate to get this feature. I've never been a video card to a computer that already has an edge - is - how complicated?
Hello
Your PC has only a 350 Watt PSU unless you had replaced him with a bigger power supply. The NVIDIA 450 needs a 400 Watt power supply.
This NVIDIA GT 440 1 GB DDR5 will work with a 350 Watt PSU.
Review the performance of NVIDIA specifications. Look at the specifications of strip memory bandwidth and level of DirectX support.
-
HP Pavilion P7-1459 fails to start after installing a new video card
I bought a GeForce GT 640 video card to put in my new HP Pavilion P7-1459, after checking the specs. The card requires a PCI-Express x 16 for Version 3.0 slot. Check, the HP Pavilion P7-1459 has one of those and all the other cards speca are well below systems.
After uninstalling the ATI driver and withdrawal of the card Radeon 7450, I put the 640 TG in the PCI-Express slot and turn on the machine. Fails it hard machine and the system does not start.
I have already tested the card in another machine and it work very well, is not the card.
Any ideas?
Please check the minimum recommended configuration for the 640 GT power. Your computer has a 300 Watt power supply, and it seems that most cards of TG 640 recommend a 350 Watt power supply.
-
Unable to adjust screen after installing a new video card.
DesktopManager aktiviere
Since I installed the video card that I can't set my screen
where can I fined the Director of bureau to be activatedSince I installed the video card that I can't set my screen
where can I fined the Director of bureau to be activatedRestarting the Office Manager...
Start button > in the search box, type services.msc > press > scroll window... > clicktopic status, it should say... Has begun
under Startup Type, it must be said... AutomaticIf not, left side, click on the word in color blue restartalso, right-click in the window... > properties...
in startup type, click on the pointer, and then select Auto
under Service status, click StartOK when finished.
Services output window. -
How to install the new graphics card due to the absence of HDMI Port
I have an old laptop, and I want to connect it to my HD TV. Problem with that is that I don't have an HDMI Port. I noticed on a similar question that you responded that it might be useful to consider the insertion of a new graphics card. As I have never opened a laptop before, I was wondering if it is fairly simple to do this, (as anyone who could do it) or if I'd rather pay someone to do it?
You can use something like this:
http://Aluratek.com/USB-to-HDMI-1080p-adapter-with-audio
or Google "USB to HDMI" of many other and different price ranges. Don't forget to look at the comments of consumers before buying something like this. They all promise of greatness, but I'm sure few deliver.
SC Tom
Maybe you are looking for
-
Why I can't change my email address in the discussion/support Web site?
-
My AVG safesearch toolbar has disappeared and I can't get it back.
I have two problems. 1.I finally downloaded the latest version of Firefox, which I tried to avoid since the last time I did I got many problems. Now that I did, my AVG safe search toolbar disappeared. 2. in addition, I already visited secure sites, I
-
TD100 difference and TD100x?
Could someone tell me please the TD100 versus the TD100x? As far as I can see, the TD100x offers 4 memory locations more, but I can't imagine that this is the only difference. I already looked at the sheets, but it seems that the leaves of the TD100
-
Hoe ik mijn pc veiligemodus ITU squeeze
hoekrijg ik mijn pc safe modus toestand ITU
-
I can be uninstalled That's what was I lost after having refreshed my phone Envy 15 q 5tx. I need install back? And how, give me a link please?