Install the SNYC does not not on new FF

Similar Questions

• To install the server does not, after a Preparig to install the window hung for several minutes

  Hi, I tried to install memeo backup of a product for a moment, I recentley purchased. I know that the software and the product is not damaged, because I am able to install it on other computers. Its my fault see tho, I have the seagate FreeAgent GoFlex 1 TB external hard drive, and I had planned to use it on several computers. sort of, I installed it on my computer windows 7 without probs., but when I was installing on my windows vista computer, I accidentally unplugged the drive when installing memeo instant upward.  Needless to say, I knew this would be a problem. Windows popped up saying that the dashboard Seagate (which is the program that installs Memeo instant backup) have not installed properly, so I clicked on reinstall this program with the recommended settings, and I handed the drive and started the installation again. When I did, the registration page (for the unit I was using) pops up and froze, so I closed its process, then Setup of the Board of Directors of Seagate Dash appeared and I started to install, and when he rose to installation of the snapshot of Memeo back, it opens a "Preparing to install" window of a windows installer and after about 10-15 minutes , another windows installer window comes up saying ' to install the server does not.

  Ive done my time just trying to solve this problem and believe he made an incomplete registry file, it whenever it tries to install it tries to use the incomplete record. If one has found a solution to this, or knows what that means of ' installation server does not ", it would be very appreciated for your advice.    If you want to know my characteristics. they are {windows vista 32-bit home Basic, sp 2, 3 GB of ram, 2.10 ghz processor}

  Hello

  you are in the wrong forum

  It comes to the installation of vista operating system instance

  Why don't contact you the program manufacturer?

  Try the repair and recovery forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system?page=1&tab=all

• By clicking on the link does not open new tab

  By clicking on a link in an e-mail message (MAC Mail) open FF and directly to the page, if Firefox is closed. Fine.
  However, if FF is already running, by clicking on the link only FF put in the foreground, but does not open a new tab, or the link fills in the current window tab. The only way to make it work is to right click to get the 'Quick Look' URL, and then open this page.

  This is happening to me, same, on Mac OS X 10.6.8 but only since I've upgraded to the latest version of Firefox, 32.0.1. I can click on a HTTP link in another application and Firefox becomes the active application, but it will not load a new tab for the link, as expected. Instead, it just sits there. I have to go back to the other application and click on the link a second time, during which point Firefox correctly open a new tab and load the destination URL.

  Previous thread for this question

• Install the map does not?

  In preferences, you can change the default for applications installation location if you don't have a lot of space on your C drive as I do and you can change it to another disklocation as D:\adobe\

  This function does not work why?

  It keeps the installation on drive C all apps!

  I tried to reinstall the application of CC, deiinstall all adobe applications. Run the cleaning of adobe tool, looked for a registry key that may help to understand where the installation location can be edited me but nothing is!

  It took several hours to find a solution without any progress.

  Someone please?

  Thanks in advance,

  Louis

  If the software is already installed, then the location will not change after changing the location here.

  You must install all products after changing the location.

  Thank you!

  Ankit

• Install the laptop does not not after last update 09/06/10

  I have installed a number of updates (multiple) who had downloaded as I closed on June 9, 2010.  When I turned on the laptop yesterday, it will display the DELL BIOS screen over and over.  I get no message or an error code and could not connect in safe mode.  If I don't stop, the system runs just this page, the screen goes black for a second and reload the page. Any suggestions?

  Hi lahlahbe,

  If you are not able to boot normally to the desktop, then you can follow the steps in this link to do a repair of the boot or system restore booting from the full version of Vista disc to boot up to the desktop:

  Step 1: Repair of the boot or system restore starting from version full Vista disc

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Step 2: When you are able to start normally, check the update history to discover updates recently installed and has not by following the link:

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• INSTALL the button does not illuminate?

  Windows XP, IE 8.0, Norton IS

  I am trying to install Flash Player 10.2. The download happens correctly. Then a window opens with 2 buttons: quit smoking and install it. The install button is not on. What should do?

  Hi, you had asked me :-) I'm sure that you have a window that the last time I looked was red. Quitting smoking is on the left side and the installation is done on the right side. Take a look just above or beside the Word Quit. There should be a small box "accept." Don't forget to click on the first (it is hard to see sometimes), then on the link to install will be active.

  Let me know if this isn't the problem that you are experiencing.

  Thank you

  eidnolb

• Install the card does not

  In creative cloud > Preferences > creative cloud > Apps, everything is gray and I can't make changes. Is the same for the location of the folder in the files tab. How to make it editable again?

  I'm under cloud Creative v2.3.0.151 on OS X El Capitan (10.11).

  

  Thank you. I don't know what happened, but it seems to automatically set after a day or two.

• I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  Hello

  1. what happens when you try to start the game?
  2. do you have messages or error codes?

  Follow the steps in the article mentioned below and check if this solves the problem.

  Known graphics issues in Rise of Nations
  http://support.Microsoft.com/kb/820089

• Try to format and do a clean install of Windows Vista on an old my computer HARD drive at home to be placed in a new Tower. The installation does not start.

  Try to format and do a clean install of Vitsa on an old my computer HARD drive at home to be placed in a new Tower. DVD starts up fine and then goes into an endless loop of the repair system that continues to check the c: / drive to find errors. Why is the installation does not start? I know that the folder c: / drive has Vista OS on it from my old compuetr. I want to wipe off immediately and start cleaning up.

  original title: try to install clean vista

  You must set your BIOS to start on the DVD from the beginning to the top.

  You have a good DVD of Vista (OEM/upgrade or full version) and NOT only a recovery disk provided by the manufacturer of the PC (or you burn you).

  For a DVD upgrade, follow the method here and make sure you format your HARD drive thanks to the tools of "advanced install" on the DVD.

  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  If you have a full version of Vista rather than a version upgrade then just do the first part of the above procedure.

• HI - even if I installed a new cartridge (black), the printer does not recognize it

  Hello - I have an officejet 4500 - G510a, and even if I installed a new cartridge identical to that just missed, the printer does not recognize it and don't use it. I would really appreciate the help on this one. Thank you

  Also please mark it as accepted if Solution my answer has solved the problem.

• After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

  After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

  Hello Siegmud,

  Wende Dich wie oben und some showers a cat den, denn

  Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

  Hans-Günter

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions

  Why my internet continue to say that the internet does not not and takes so long to connect, I have a new computer, I have also a pc clean and do not always help. any suggestions

  Hello

  Thanks for posting your question in the Microsoft community.

  I understand that when you try to connect to the Internet, he says at the outset that Internet is not responding and then after some time to connect. Let us know if this is incorrect.

  It would help if you could answer these questions.

  a. what version of Windows is installed on the computer?

  b. don't you make changes to the computer before the show?

  I suggest you check out the link and follow the steps.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-GB/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know if you need more assistance.

• I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hardsrive must be clean first. The disc does not start on the existing XP. How can I do this?

  I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?

  Hello

  Have you changed the boot order?

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  See you soon.

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.