Install Windows 7 on a new hard drive

Hi all

Old story, my hard drive is down so I bought a new disk of 1 TB of Seagate which is totally clean.  I tried to install Windows 7 Pro, but without a formatted drive any Windows can not find the new drive.  I need to install Windows 7 for software compatibility and server.

I had ideas.

I thought I might be able to install the hard drive on my computer at home and shaped in this way, no dice, that mount the new drive without spare cords.

How to create a bootable CD on my computer at home and use there - not sure - Windows 7 Home.

Any help would be appreciated.

Best Rgds,

Dave R.

When boot you the disk to Setup and windows loads, it says files using SHIFT + F10 to enter in the command line

Then use this to use a part of drive to clean up and format the drive

Press ENTER after each command

DiskPart
List disk
Select the disk n (where n is the number that has been given to your HARD drive in the list disk)
Clean
Create partition primary align = 1024
Format fs = ntfs quick
Assets (assuming you want to install an operating system)
Output

Output

You have just erased everything on the disk and are ready to install windows.

If you encounter an error using

DiskPart

List of Volume

Select volume 1...

Deleting a Volume

Repeat for the other volumes

Then proceed to
List disk
Select the disk n (where n is the number that has been given to your HARD drive in the list disk)

Clean

Format fs = ntfs quick
Assets (assuming you want to install an operating system)
Output

Output

Tags: Windows

Similar Questions

  • How to install Windows 7 on the new hard drive?

    I changed the old hard drive (500 GB) with a new hard dirve (1 Tera) and now I have two problems:-

    1. how to install Windows 7 on a new hard drive?

    2. my laptop came preinstalled Windows 7 Pro, but all the DVD kit (disk reclaimer Application & discs) + Revocer operating system, which has been provided (by Lenovo) for the laptop is in the Windows 8 Pro. So, how to install Windows 7 Pro, my laptop while all the DVD sets are in Windows 8 Pro?

    either way, this is my laptop spec (for reference); -

    * Note *.
    I intend to install Windows 7 Pro on my new hard drive using another DVD of Windows 7 (not DVD provided by Lenovo), but how do all Leveno program located in the disk 'Application & recuperator readers' (by example; - Lenovo system health and Diagnostics, Lenovo Power Control, Lenovo Fingerprint Reader) to install this hard drive? (as I told you before, all the DVD kit is at or only for Windows 8 Pro)

    I hope someone will help me answer my question,
    Thank you

    I found the solution.

    Response to question 1; using a recovery & backup software to clone my current operating system, and then transfer them to my new hard drive.

    Response to question 2; Download all drivers and software (all the application that located on the DVD of the kit I have) on the official website of Lenovo.

    or another solution, send to a computer service shop and let the experts (workers) install it for me (the most simple and sure way).

  • Install Windows 7 on the new hard drive with USB operating system recovery?

    I have an Alienware 2015 15 which does not come with a CD player. I install a new hard drive (SSD 2280 m2), so the question is how to install WIndows 7.

    While Microsoft offers an OS IOS for WIndows 8 download that you can put on a USB (with dell, I think that it automatically pulls the product key of BONE off the coast of the motherboard?) this IOS download is not available for Windows 7.

    So the question is the recovery USB OS offered by dell will allow me to do a fresh install of Windows 7 on a new hard drive in the laptop even USB from recovery of the BONES came with. My last resort is to buy a new copy of windows 7 and a USB external CD/DVD drive.

    TLDR: OS Recovery USB offered by dell will install Windows 7 on a new hard drive.

    The factory restore USB will work on another drive. I did this procedure with the media created from the latest version of Dell backup and restore on my Inspiron 13 7347 and demonstrated the creation of media and installation on a new SSD:

    http://dellwindowsreinstallationguide.com/Dell-backup-and-recovery/

    Since you are using use Alienware Alienware Respawn. Alienware respawn is very similar to Dell backup and restore.

  • I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition.

    * Original title: installation of windows 7

    I install Windows 7 on a new hard drive, but the installation gives an installation message could not create a partition or locate an existing partition. Why installation does not create a new partition.

    Try the following

    Boot from the Windows 7 DVD

    Click Install now

    Accept the license agreement

    When the option is displayed to select a type of installation, click (Custom advanced)

    Press SHIFT + F10 from your keyboard

    type the following commands

    DISKPART

    Press enter

    the list volume

    Next, you select the volume where you want to install Windows 7

    Type: select disk #.

    # represents the number of the volume

    Type: clean

    convert mbr

    create the primary partition

    assets

    format fs = ntfs quick

    output

    output

    Try to reinstall.

  • Acer recovery disks do not install Windows 7 on a new hard drive SSD

    Hi all!

    I have Ace Aspire 5742 G laptop and I have problems to install the Windows 7 operating system on my new hard drive SSD (I bought the SSD because the original hard drive is defect and do all the time... blue screens)

    For the factory restore, I use the restore disks. I burned the discs a few years back when the laptop has insisted me to do (using eRecovery or something, in total 3 dvds).

    Testing of computer to install the operating system with the DVD (asked to insert a dvd and then press a key). The real problem is that the installer will just in loops, restart and eventuallyfreezing in the end...

    Restart--> Acer--> Windows logo takes over... files-> from windows-> reboot-> etc.

    Which continued for more than an hour (on the first dvd!) and all of a sudden that it froze right on screen "starting windows..." I had to restart and stars on again once.

    I can still use my old formatted HARD drive, should I do the new set of recovery disks or use a USB?

    Thanks for the answers in advance!

    FR.
    Barbarian90

    I was not able to edit my previous post, so I'll make a new...

    So I thought (with the help of Google) that the problem was that I had installed the new DDR3 memory game. When I changed them back to the original ones (2x2gb) everything worked smoothly.

    anyway. Thanks for the help!

  • The recovery disks will let me install Windows XP on a new hard drive?

    original title: I have a hard drive goes wrong with Windows XP, the recovery disks won't let me install winxp on a new hard drive? I have a disc id and start product

    I have a hard drive goes wrong with Windows XP, the recovery disks won't let me install winxp on a new hard drive? I have a disc id and start product

    Hello

    For the use of the recovery disc, I recommend you contact the manufacturer of the computer because these discs are personalized computer manufacturers.

    Hope this information was useful.

  • Dell Inspiron 3520 - hard drive failure - how to install Windows 8 on the new hard drive

    I bought Dell Inspiron 3520. My hard drive has stopped working completely. It was stated as dead hard drive by diagonstic center.

    I have now bought a new hard drive but have lost data and windows 8 preload on the original hard drive. Dell did not provide any recovery disk for Windows 8 pre-loaded on portable hard drive. How can I then install windows 8 / 10 on my new hard drive?

    The .iso image file official 10565 has only:

    • Overview of the House of insiders
    • Overview of the Insider Pro

    Unfortunately, there are 5 editions of Windows 10 and so 3 are missing. If your key is not automatically entered and accepted, it's probably a simple language edition or edition N.

    When Microsoft release 10586 - TH2 - 1511 Version they will probably have an .iso that contains all 5 editions in 1 .iso or alternatively 5 .isos distinct (I hope as the first case that it will make Windows installation much easier).

  • I can install Windows 7 on a new hard drive for HP Envy m6 1205dx

    My HP Envy m6-1205dx son is a notebook of 2013. The screen was broken and I replaced one. Now he says that there is not a BONE, I tried to install a full version of Windows 7 Professional, and he said that he there was not a boot device. I've reconfigured the BIOS to boot with the CD/DVD ROM and it started installing. When he arrives at the point of asking where to put the installation there is no option. I checked the connection to the hard drive and it is not a problem here. I think to buy a new hard drive to install the Windows 7 operating system, I am afraid that it will not work or he will say that I need to install the drivers. This laptop originally supplied with Windows 8. Can I install this version of Windows on this laptop? If I need to install the drivers how can I get them? It cannot be a website to download the drivers on your computer. I can't do without the computer having an operating system. I downloaded some drivers from a link, I saw on You Tube and put it on a flash drive, but none was consistent, one of them did read on a different/more older computer I tried to install this OS on and it says that the driver was out of date. It seems to me that a (FULL VERSION) drivers and everything else you might need. I'm not computer savvy, so I do not know! I'm just trying to save my investment of $600 on this computer without spending $300. I can get a new hard drive for $80 and it was on that I would go; However, I will buy a new Windows 8 operating system if it is the only option.

    There is no device driver Windows 7 for your model, only Windows 8:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5359748&cc=us&DLC=en&LC=en

    If there is no driver, your PC may not work correctly (No. LAN or WiFi, Audio, USB, etc.) after the installation of Windows 7.

    Check your hard drive, if the laptop has been abandoned the drive may be defective and must be replaced.

    You can order a support of HP recovery:

    http://h10025.www1.HP.com/ewfrf/wc/document?DocName=bph07143&cc=us&DLC=en&LC=en&product=5359748

    J W Stuart: http://www.pagestart.com

  • After you install Windows XP on a new hard drive, I am unable to activate it.

    Original title: key not turn

    After put xp to new hd key entered went to the Activation Center and they disabled key how can I fix?

    original title: impossible to activate

    Hi DonWebb,

    1. What happens when you try to activate Windows XP? You receive an error message?
    2. Where you successfully able to install Windows XP on the new drive?

    Refer to the article below for more information on activation of Windows XP.

    How to activate Windows XP

    http://support.Microsoft.com/kb/307890

  • Portege M400 - cannot install Windows XP on the new HARD drive

    Hello here is my problem,

    I bought an older Portegre M400 E, without a HARD drive. So I buy a new Samsung 400 GB. I looked in the Bios (ACPI BIOS Version 3.40) and it is ok. He shows me the HARD drive with built in Assign LD - 0 status ONLINE, 400 GB size so it seems to be nice. Changed the matrix Raid, described in the manual, in condition to create 1Raid-0
    So, I want to boot from the Windows XP CD, not recovering my own.

    Windows open to the top and after a short period, the installation ends with the message that it is not any HARD drive. This I try sometimes :-( Hope someone can help me.
    Do not forget that I didn't have any HARD disk with the dates of the laptop.

    Thank you Carsten
    (Sorry my English is not so good Im from the Germany)

    Wilkommen!

    > Changed the matrix Raid, described in the manual, in condition to create 1Raid-0

    I don't know much about your model, but I think that something wrong with the raid in the Bios settings. What other options are available in the Bios for the State of the hard drive? I found the RAID driver on the Toshiba driver page. It is possible, that you can integrate in with a program called nlite Windows installation disc or install Windows as in compatibility mode, and install the Raid driver. then

  • H8 HP desktop computer - 1285D:-how to re - install Windows 8 on my new hard drive

    Hello

    I got hard drive without warning for the month and I finally decided to change the hard drive. I added the new drive on the PC and reformatted it.

    I am currently using Windows 10 (update of Windows 8).

    I have the recovery CD that I created using Windows 8.

    My question is how to install windows 8 nine hard disk? I have to disconnect the old drive hard first and pop in the recovery CD?

    Thanks for the help

    Hello

    Did you back up your data?

    The best scenario is to use the official media of external recovery HP and bring your PC to a first day factory condition. Remove the default HD and plug the new HD on this port. Now boot to the top of the HP recovery media and following the instructions on the screen.

    Thanks for posting on the forum.

  • How to install Windows XP on the new hard drive after an old crashed?

    HI: my name is greg, my brother recently bought a used computer to replace the one he had, which crashed. Itrdidnt have a hard drive in it, so he put an in, he had then loaded the windows xp for the computer crashed, but after that, it could not authenticate the computer only it Noah has can you help me thank you so much Greg

    You can move the windows on a new computer

    If it's a full license or upgrade retail - Yes. You can move it to another computer as long as it is installed on a single computer at a time (and if it's a Windows 7 Upgrade version the new computer must have its own license of qualification). The previous Windows installation on your old computer must be formatted or deleted. You will have to perhaps call Microsoft and explain what happened to complete activation. Turning it on the second computer will automatically be in effect 'disable' the license for the first computer.

    If it's an OEM license - don't. OEM licenses, including Windows preinstalled on a computer before purchase and Windows purchased separately, are related to the first computer, they are installed on and cannot be transferred to another computer. To install Windows on another computer, you will need to buy another copy.

  • Install windows 7 on the new hard drive getting the error cannot continiue

    I bought a new drive hard seagate from my existing was only 250 gig, so this is a new clean install, I installed the drive hard drive start the computer with the dick of installed Starter, he began to load then I get this error message saying;
    "Update failed due to a stop press unexpected ok to restart the computer." Installation will continue after the computer restarts. »
    However, when you press ok, the machine starts, but continues to display this error message and so am now stuck in a loop. What can I do to stop this, because I am totally confused. I have a second hard drive in the machine, but when it is started, he found the new HDD 1000 GB.

    I am running Windows 7 (64 bit),

    Processor AMD Phenom 11 X 4 3.4 ghz AM3 Quad

    MSI 790XT-G45 AM3 / AM2 + / AM2 AMD 790 X ATX card mother AMD

    Any help would be appreciated

    First chech that the BIOS is configured to use the CD/DVD drive as frist boot device.

    Then remove the old drive and only connect the new drive.

    Start the PC and insert the CD that you created and boot from the CD.  If there is a "Long full" test, which is that you need to perform. Also check the SMART data (look for bad sectors).

    J W Stuart: http://www.pagestart.com

  • Install windows 7 on a new hard drive by using recovery discs. (Pavilion all-in-One MS215UK)

    Hard drive crashed and HP sent a new with recovery discs that say they will reinstall windows 7. Discs and installed hard drive run for 'restore factory settings' by following the instructions. Takes about an hour and all 4 disks are asking but then becomes at the end and left with white screen saying "no operating system installed."  Left on for a period simply show this message in case something happening in the background, but nothing happens.

    2 extra drives came with set, but they simply refer to the instructions that make no mention of them.

    Please help I am a novice total things withthese

    Hello

    Download and create the bootable CD as described at the link below.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-80183-1&cc=us&LC=en&DLC=en

    When you created this CD, insert it into the system that fails to start, restart, and wait until you see a window with a green check mark.  Next, remove the CD and insert your first recovery DVDs.  Reboot the PC and go through the process of installing the operating system again.  If all goes well, it should install properly this time.

    Best wishes

    DP - K

  • Try to install Windows 7 on the new hard drive - 500-298w Pavilion

    System hangs on the language selection screen after the loading of files and Windows startup screen. No keyboard or mouse input. Tried to move the keyboard usb on the front and back of the usb ports. Hard drive is recognized as a storage device in the BIOS

    Things I've tried in BIOS

    -in Storage Options: I tried IDE and AHCI

    -UEFI Boot Sources: disabled

    -Legacy Boot Sources - CD/DVD is installed on the first position

    Secure Boot cfg: leg Sup-> Enabled, secure startup-> disabled

    Tried with quick start-up tech and virtualization enabled and disabled

    I have to do something with key Mgmt?

    Should I start a self-test DP? 270 minutes... Ouch

    Anything in the options to be changed.

    .. .confused

    Still have the original with Windows 8.1

    Hello

    Do not forget to connect the keyboard and mouse USB 2 ports (not USB 3).

    If you are using a non-US keyboard and/or a version non-English version of Windows, then press the ESC key at startup to the top and then select the appropriate language.

Maybe you are looking for

  • The message on printer ink system failure

    Spoiler (Highlight to read)     Have a message to get HP Office jet 6500 on printer ink system failure Anyone?  Thank you Peebles

  • can not activate Wifi on acer aspire v5 - 573 g

    WiFi won't turn on my pc win 8.1. The possibility to activate the wifi is faded. Device Manager displays the device works perfectly. The driver is "WLAN_Atheros_10.0.0.263_Win8.1x64". I reinstalled the driver. Don't know what to do more. Any help wou

  • UPnP vulnerability

    If you are eager to know if your Linksys router is potentially vulnerable, then you can run the Netalyzr test.  It requires that java is enabled on your web browser to run the test. http://Netalyzr.ICSI.Berkeley.edu/ http://Tools.Cisco.com/Security/C

  • Edit box "Padding".

    I have an edit box custom that has rounded corners and may have a different background color when highlighted.  However when I put two of them inside a vertical Manager there is no filling between them. I tried to adjust getPreferredHeight, but it ha

  • WAAS in 2921 SRI - G2

    Hi all I have a 2921 with a switch module of the ether 16port and need to install the SM - SRE 710 for WAAS. 2921 G0/1 is the WAN 10.1.1.1 and internal port G1/0 LAN 10.1.2.1 How can I assign IP addresses to the SRE module so that I can use WCCP to d