Install Windows 7 on a new internal hard drive

Similar Questions

• Buy the new internal hard drive

  I have HP Pavilion dv4-1242TX

  Recently, my original 320 GB (Western Digital Scorpio Blue - WD3200BPVT) internal hard drive crashed and become inadmissible.

  So now I want to buy a new 500 GB internal hard drive, but I'm confused if my laptop it will support or not.

  Internal hard drive WD Blue 500 GB laptop computer (WD5000BPVT / WD5000LPVX)

  MAIN FEATURES

  Other than the size, I see no difference between the two discs.  Just having the Recovery DVD set available and install the new drive, run the set of recovery and off you go.  If the old drive is toast, there's nothing else to do than to run the updates from Microsoft.

  Or install Windows 7, commercial version of your choice.

• How the value catalog new internal hard drive more and then delete the files from the smallest

  I just got a new 1 TB internal on cloned hard drive 500 GB internal hard drive installed on my PC, then the smaller original. The new 1 TB is now Local Dick C and the smallest 500 GB by C has been changed and is now Local Disk F. PSE11 runs from the new C and all my photos are on C and F, but the catalog showed up at F. I want to delete all the old files on F for free space because they are all cloned to the new 1 TB C, so I want to catalog PSE11 only point to the pictures on C I tried to create a new catalog and import my pictures from C. The images arrive and look tuned to C but when I close PSE11 and then reopen this new catalogue, the path of the image shows F, as does the original catalogue. So, now, I have two catalogs seem to point to F but I want: 1) have a single catalog pointing to C; (2) deleting catalogs pointing to F; (3) then reformat f: so I have a 500 GB clean old hard drive for future expansion. Peuvent some please help?

  The problem is related to the cloning process.

  As stated in the first post of Neale, the Organizer acknowledges readers by their letter AND their serial number. In these situations, both drives have the same serial number and the Organizer cannot tell who is who...

  More information in the help file on John R Ellis from his psedbtool:

  http://www.johnrellis.com/psedbtool/#_Writing_File_Metadata

  Scroll down to: "change the serial number of the drive, a Volume."

  Check first with the DOS command 'Flight' that both disks have the same volume id, and then try to change one of the drives serial.

• Can I install windows 7 on the superdive replacement hard drive

  Hello people,

  Recently I replaced the drive of my macbook pro 13 inch mid-2012 with an adapter (caddy tray) to put in a second hard drive (500 GB todhiba).

  Now I am trying to install windows 7 with bootcamp (on an os x 10.9.5, bootcamp 5.1.2), but when I boot from the usb device, when windows ask me which drive I want to install it, it says: windows cannot be installed to this disk, drive must be formatted ntfs + your computer hardware seem unable to run windows 7 check your system components and try again.

  I've tried several things: the direct USB win7 reformat, delete the partition, create partition... still no luck.

  Of in osx: reformat the disk with unallocated space (MBR) and try again to install direct USB... had the same error messages.

  I even tried to install Ubuntu gnome rather with a live usb works but all I get when holding the option button while booting is my Macintosh HD, the drive appears.

  Can someone give me about workaround or even show me the way? I am out of ideas now.

  Thank you very much

  Simon.

  Please see Installer Windows 7 Pro on the second HARD drive which is in Optibay for some answers.

• Trouble with the new internal hard drive...

  Hello, I just bought a 500 GB for my Dimension 4500 internal hard drive. When I click on my computer, it says the hard disk capacity is only 127 concerts. I think it's because the motherboard is old (I got the 4500 in 2002). Is it possible to reach the full 500 concerts (465-formatted) using this motherboard (i.e. through a BIOS upgrade or something) or 127 is the max I can get with this system?

  If I need a BIOS upgrade, where can I get TI/how I do that?

  Any help would be greatly appreciated.

  Thank you
  John

  
  

• Why Windows 7 did install system files on my secondary internal hard drive, preventing it to be formatted or considered a Windows backup location?

  My computer has a Seagate hard drive 500 GB internal SATA that has the operating system on it and also a secondary internal Seagate IDE HDD 80 GB that I was drag files on a backup. I tried to format this drive of 80 GB to get a fresh start and use Windows backup to back up my files. Windows 7 will not format the drive, and he does not see the drive as a location of backup because apparently the clean installation of the Windows operating system, updated system files on the secondary drive. Disk management reports the operating system drive (500 GB one) as "disk 1-Boot, Page File, crash dump, primary Partition. It reports the secondary drive (the 80 GB one I would use with Windows Backup) as "disk 0-system, active, primary Partition". I would very probably disconnect the secondary drive and do other clean install of Windows 7, so he places all the files on the hard drive and do not involve the secondary drive, so I can format the secondary drive and use backup Windows? Or y at - it another way to fix this without doing a clean install? Thanks for any help!

  To create a new, full backup

  After you create your first backup, Windows backup will add new information or changed to your subsequent backups. If you save your backups on a hard drive or network, Windows backup will create a new backup, full for you automatically if necessary. If you save your backups on CDs or DVDs and could not find an existing backup disk, or if you want to create a new backup of all the files on your computer, you can create a full backup. Here's how to create a full backup:

  1. Open backup and restore by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click Backup and restore.

  2. In the left pane, click on create new, full backup.

     

     Note

     You will see this option if your backup is saved on CD or DVD.

  http://Windows.Microsoft.com/is-is/Windows7/back-up-your-files

• If I bought a new internal hard drive, can I transfer windows hard drive fom that came from the computer to the new, or do I have to buy another software package full of windows?

  What should I do to get windows vista on the new hard drive on the old, because I would like to upgrade to windows 7 since vista when I transferred transversely to the new.

  Your license of Vista will be OK to reinstall it on a hard drive replacement on the same computer.

  Hard disk manufacturers provide normally cloning software to do what you want to do.

  Look at your new Hard Drive manufacturer's Web site.

  Or there are 3rd Party software (cost the same money if): http://www.acronis.com.au/homecomputing/products/trueimage/

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  See you soon.

  Mick Murphy - Microsoft partner

• Install Windows 7 Pro on the second HARD drive located in Optibay

  Hello

  I have a 2009 15 "MacBook Pro C2D 2.66 with 8 GB of ram and a 480 GB SSD as my main drive. I will be to install a secondary HARD drive in the optical Bay. I want a 250 GB partition for a boot camp and 750 GB partition which can be read by OS X and Windows. 750Go partition will be used mainly on the side of the OS X to store photos, movies, music and documents but would be like training camp to access incase I need a file or two. I have already twisted boot camp to allow a windows usb installation and wonder what to do next steps are. I have read several forums and it's possible but instructions on the forums seem to be a specific user. Thanks in advance.

  1. on your specific Mac, windows should be on the main drive Bay. It will be also problems to start.

  2. do not modify the Info.plist Bootcamp and try the USB installation. You spend hours trying and it will fail.

  3. you must use the internal optical drive, integrated to install Windows on the main drive Bay.

  4. Once Windows is installed and fully functional, you can then replace the Optibay drive.

  5. do not throw your optical drive. If you need to repair Windows, you will need to return to the standard hardware configuration.

  6. you can have problems even under normal circumstances with a dual Setup, so be prepared for adventures in such a configuration.

• Satellite A200 - 1 GB - trying to install Windows XP Home edition but without HARD drive?

  Hello world!

  Recently, I bought a new laptop, Satellite A200 - 1 GB, and after two weeks of fighting against windows Vista I decided to uninstall it and install WXP whose permit, I bought a long time ago.

  I restarted my computer with the Windows XP cd to the inside and I start the system with it, but when it loads all the controllers and I proceed with the installation of windows xp, it says that there is no disk (probably) in my laptop.

  I hope someone can help me. Someone at - it windows XP installation experience in this laptop model?

  Hello

  The species has been described several times here in the forum of Toshiba.
  Recommend studying a little ;) would use the advanced search option Forum!

  But because you're a beginner, that I'll try to give some useful advice.
  The HARD drive is not visible because you need to first install the Intel Matrix storage controller.
  This controller can be downloaded form or another page Toshiba or Intel page.

  During the installation of XP, you will need to press the F6 key to include this iMSM in the XP installation. You will need an external USB HDD drive to do this.

  But if you want, you can build an own XP CD using nLite software and could understand this iMSM in the XP CD again.

  Please also check these discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25749

• Difficulty to install Windows XP because of the missing HARD drive driver

  Hello

  I recently bought a P200-1 and I try to install Windows XP instead of Vista.
  I bought Windows XP Home Edition. Installation was first arrested for lack of HARD disk drive.
  Classic message: «Setup didn't find any hard drives installed in your computer»
  I downloaded Toshiba support "Intel Matrix Storage Manager" (pilot: ICH8M_32bits).

  The contents of this directory was extracted to the root of a disk.
  I restart my PC with XP CD-Rom and floppy drive connected. Setup download SATA AHCI floppy driver (press F6, and then later S key).
  The installer can read disks and partitions and offers the choice of a partition for the installation of XP system.

  After you have selected a partition, the installation begins and the installation program asks to insert "Intel Matrix Storage Manager" in drive A.
  Here's the problem: floppy drive not responding, disk is not read and XP installation stops.
  Ask for a second time to insert the floppy is suspect because he thought the driver drive HARD has already been read successfully.

  What can I do now?

  Thank you for your help

  JR

  Hello

  The problem might be that you have formatted the HARD drive (partition) or created a new partition after the installation of the Intel Matrix Storage Manager.
  In this case the formatting removes the driver from the HARD drive.

  Another possibility is the use of software called nLite. This software allows to include the SATA driver in the XP installation CD.

  Simply search for nLite and you will get lots of useful details.

  Greetings and good luck

• Stop error: 0x0000007b while trying to install Windows XP Home Edition on SATA hard drive.

  Original title: new hard drive Blues.

  got sata disk hard western digital 500 GB installed, I have tried to download winxp home, got a blue screen

  stop: 0x0000007b (0xF78D663c, 0xc0000034, 0x00000000, 0x00000000

  I need help

  Hi aqm0207,

  How you try to install Windows XP Home Edition?

  You may receive an error message "Stop 0x0000007B" in the following scenarios:

  (a) a device driver that your computer boot controller needs is not configured to start during the startup process.

  (b) a device driver that needs your computer startup controller is damaged.

  (c) It can also occur if the hard drive in the BIOS configuration is bad.

  You can check if the SATA hard drive is correctly configured in the BIOS (Basic Input Output System) & can also update the BIOS. If you are not comfortable to do, you can contact the manufacturer of your computer for help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  You can also check this link:Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Local tech installed Windows Vista Home Premium after a hard drive failure. However, my key is Windows Basic. Is the copy, he put on my system illegal?

  Genuine Windows clean install

  Hello

  I had a problem with my laptop Acer Extensa 5230th. It was not started and so I took for Matech computers.  They diagnosed as having a mechanical drive problem.  So they replaced the drive and installed a more recent version of windows vista on.  Note: I haven't bought a new copy of vista family premium, he said he was going to reinstall vista.  It had windows Vista Home Basic, it has installed vista Home premium and said that he had validated by call from windows, but I'm suspicious because I don't think you can use a base of windows key to validate Home premium!  It means that he has put on an illegal version on windows or used the genuine key that came with the laptop.

  In addition, on computers of brands, if this happens again, how is a technician for legally to reinstall the original windows that it came with the new hard drive? How to install windows vista basic on the new hard drive by using the original key to make it genuine? What windows installation disc would you require? or is it easier to just buy a new copy of windows?  I heard that many technicians, prefer to install illegal versions of cracking of windows instead of the customer to buy the new installation of windows.

  Kind regards

  Lewis

  Here are some utilities which displays product key Vista Matech used to activate Windows:

  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.
  However may not detect a key to office, then try one of the other two below)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html

  Please do not post your key on this forum, rather checking to see if it matches the key on your laptop, I(Correction: "if it isn't') it will fall sooner or later"Non-genuine"that your key was for another version of Vista so what was installed.

  J W Stuart: http://www.pagestart.com

• Re-install windows 7 home prem on a hard drive replaced

  I have a HP probook 4520 laptop computer s which is come with a pre-installed win 7 home prem copy OA 32 bit, when I bought my laptop I was told that I need to reinstall the windows it is possible to simply reinstall without cd or dvd as the copy of windows is saved on the laptop, in any case now my laptop is out of warranty (it just just expired a month ago) and my hard drive crashed, there was no way to get what was in it, so I had to buy a new hard drive, now my problem is, how do I install a new original and an activated copy of windows 7 on my computer, knowing that the only thing that I have now is the sticker on the back of my laptop which has number of authenticity Windows that has been installed on the hard drive dead (the former)? is anyway to do this? Help, please

  is it OK to install the copy of 64-bit and not 32 Bit? the product key will work?

  I want to install the 64-bit because I need RAM reading entirely, as the 32-bit edition do not recognize fully...

  The key of Windows 7 works with 32 and 64 bit, but can only be installed at a time.

  First, make sure that the 64-bit drivers are available for your computer - check with the manufacturer.

  If you are moving to 64 bit make sure that your computer can run 64-bit - you can use the Upgrade Advisor to check:

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Installation and reinstallation of Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  Case of failure of the online activation:

  Call Microsoft use the manual phone Activation

  Note: If you always install Windows page enter your product key, do not enter your key and uncheck the "Automatically activate when online" then click OK/next to complete the installation.

  1. open Windows Activation - click on the Start button, right-click computer, click Properties, then click the option to activate Windows now or change your key.

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated phone system.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. dial one of the available phone numbers listed.

  7. do not select all options and wait for a person pick up, then explain what happened.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• How to install Windows 7 upgrade on a blank hard drive

  My previous installation of Windows 7 upgrade on my hard drive that had a Windows XP installed upgrading later had a HD failure. I bought a new HD and have not been able to perform a reinstallation of Windows 7 using either the previous update purchased DVD. How can I install my upgrade to Windows 7 on the new HD?

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Installing Windows 8 does not detect my hard drive!

  Hi all! I recently installed a new copy of Windows XP on my computer to Windows 7 and now I would like to install Windows 8. I have no viruses on the Windows XP Machine, then Yes. I boot on my CD of Windows 8 and when it comes to the part where you want to install windows my hard drive is not detected... Strange... Whenever I installed a new copy of windows I've never had this problem...  Instead, I see "Boot: X" and my installation disk. " PleaseHELP!

  Try the following

  Boot from the DVD Windows 8

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Press SHIFT + F10 from your keyboard

  type the following commands

  DISKPART

  Press enter

  the list volume

  Next, you select the volume where you want to install Windows 7

  Type: select disk #.

  # represents the number of the volume

  Type: clean

  convert mbr

  create the primary partition

  assets

  format fs = ntfs quick

  output

  output