Install windows 7 USB

Hello. I am tring to create a disk usb flash windows 7 install windows usb/dvd download tool 7, but it says: "status: files copied successfully." However, we were able to run bootsect to make the USB drive bootable. If you need assistance etc... "I am tring to create a windows 7 64 bit install usb flash on my laptop which runs Windows 8 64-bit language. After plugging in the usb on my desk, it gives an error: cannot start Windows. A recent hardware or software change might be the cause etc etc. I have a windows crashed on my desk that makes a loop at startup screen with a stupid loop of windows startup tool. But my windows crashed does not even work because I have not set as 2nd boot drive on my Bios. And when I try to run bootsect.exe manually, it gives an error saying: this tool can be run on starting systems using a pc / at bios. This system has been started using EFI or another type of firmware. First of all, I think this must be a joke. I mean, I can't do something because my current system does not work with it? It's my laptop, yes it might be using EFI, but I'll stay this usb on my desktop to install windows 7. If someone knows a solution? Yes a fair web searches head me to BOT-promoted solutions. 5 sites different all the same solution with the same person asking question, same person answer and even 4-5 people showing "Yes it works! So yes the web is corrupt way * now.

I thought about it:

You cannot run the version that is part of the installation media that you try to make your USB with on a PC/AT firmware or EFI.

Bootsect is part of my Windows 8.1 UEFI systems and is part of Windows 7 (Vista maybe) on-site.  So what I did was open prompt as administrator, which brings me in C:\Windows\System32.  Note 'C' may be different and will depend on which drive you have your current Windows operating system.

From there, without changing directories, I typed:

Bootsect/nt60 f:

(f is the location of my USB key and will be different for most people, just replace your USB drive for this letter)

Voila, done.

Tags: Windows

Similar Questions

  • Cannot install Windows 7 USB

    When you try to install Windows 7 USB, I get the following message:

    "Setup could not create a new partition or system to locate a system partition. See logs of installation for more information".

    I'm trying to do a clean install of Windows 7 on my new laptop that does not have an optical drive, so I have to use a USB key. I read on the forums countless that USB is the problem - Windows 7 will not install with a connected USB drive, because blah blah can't install on a disk that can be removed. Or something. Only I do not want to install on the USB. I'm installing FROM. So I HAVE it up.

    How can I fix it?

    Hi TheOneGuy,

    Looks like you did some research, so I apologize if it is redundant.  Did you see the next post?  It is quite similar to your question and has a possible solution:

    http://social.answers.Microsoft.com/forums/en/w7install/thread/4b3c0430-9E41-47F6-b1cd-aed55fea7dad

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • B1H40EA #UUW: cannot install Windows 10 USB and Windows 7 online

    Presario CQ57-400SO.

    I can't install Windows 10 from both usb and online.i once finished the installation process of void and he returned my system to the old program Windows 7

    Oh I managed to download Windows 10via usb, I think that I never had a driver hp support? Updates

  • Lenovo Thinkpad S440 install Windows 7 USB

    Hello guys,.

    I have a big problem. After days of disliking the preinstalled Windows 8.1Pro I wanted to install Windows 7 Professional 64 bit ISO (X 17-59885) with a stick of unetbootin.

    First of all, I wiped the entire disk with 'Ubuntu Live CD' (installed on a USB key).

    After that, I tried 3 different USB keys I put on the Windows 7 with Unetbootin to install on my HARD drive.

    The Start Menu shows the sticks but can't open it.

    I already went in BIOS (ThinkPad Setup) and tried a few changes but nothing helped.

    Important: I have no external DVD drive

    Try another usb key that I used this method on 10 usb keys because it is a way to give to my classmates of backups of the operating system, I had a few USB stick which would not work with the tool, because I use the tool to copy the iso on usb, I'm not sure any other tool

  • Why I can't install Windows 7 USB DVD Tool?

    Hi, I am located in Sweden and recently bought premium to the home page of Windows 7 on the Windows Store Web site.

    I chose to download the file to .iso formats the hard drive.

    Then I was told to download Windows7, but just after full download USB-DVD tool and I try to install it, nothing happends.

    Restarted my computer and everything but nothing helps.

    I am currently under overcharging Windows Vista Home 64 bit and Windows 7 64-bit.

    Don't seem to find and sollution to my problem and really want to help.

    Tried to redownload the tool USB-DVD of windows 7 but still, nothing happends.

    Kind regards!

    Download Windows 7 USB/DVD tool
    http://store.Microsoft.com/help/ISO-tool

    Install Windows 7 from USB drive/key
    http://www.MaximumPC.com/article/HOWTOs/how_to_install_windows_7_beta_a_usb_key
    http://www.intowindows.com/how-to-install-Windows-7vista-from-USB-drive-detailed-100-working-Guide/

    How to install Windows 7 from a Flash drive with XP or Vista:
    http://www.legitreviews.com/article/1031/2/

    JS
    http://www.PAGESTART.com

    Never be afraid to ask. This forum has some of the best people in the world to help.

  • How to install Windows USB on the Satellite L50D.-c 10.

    How to install windows 10 usb?, model L50D-C

    https://www.YouTube.com/watch?v=psPWQy3-5B0

    Might help u

  • Wanted: HDD Fried, need to install Windows on the new SSD

    My HARD drive on the flat because of a power surge. When I called HP Customer Service, they said I could get a USB one of recovery from any Windows computer, and then install Windows from USB to any new HDD or SSD.

    Now, when I try to install Windows on my new SSD clean or Virgin USB 8, it says that the partition is missing.

    How can I install Windows 8 on a whole new SSD?

    Thank you.

    Hello

    You can fallow as follows

    Step 1: Prepare the Installation
  • Lenovo IdeaPad U310 install Windows 7 Professional in RAID mode

    Hello community,

    I need to install windows 7 pro on my brand new IdeaPad. But still, when I start installing windows from USB, it is said: no hard drive. Can you tell me, what is the right driver from Intel for the installation of windows 7 pro in RAID mode?

    TUST me, the GTP partition table will drive you nuts.

    Use Windows 7 at any time update and insert your Windows 7 Pro key. This will transform your Home Premium Windows 8 Pro.

  • How to install windows 7 on a mac with nno disc player?

    I have the new mac of the retina and need windows to install an architecture of the school program, but I don't have a disk drive. is it possible to back up windows on a USB?

    See:

    How to install Windows 7 on a MacBook Pro with the Retina display
    How to install Windows 7 on MacBook Pro with Retina Display ...

    Here's a video:

    HOW: install Windows 7 USB using boot camp on 2012 retina ...

  • Can I install Windows 10 on external USB SSD?

    Is it possible to install Windows (10) on a 3.0 SSD external? Bootcamp will allow me to select an external USB disk for installation of windows? I can't check myself right now because im currently waiting on a new SSD in the mail. It is possible, if difficult how is it?

    Thank you all

    Manager licensing Windows supports external drives under Windows Enterprise using Windows-to-Go. You can use a third-party software like Winclone or CampTune Clonezilla to move an image.

    Depending on the connection to the external drive, it may or may not work.

    See also http://bleeptobleep.blogspot.com/2013/02/mac-install-windows-7-or-8-on-external. html .

  • Can I install Windows 10 of Bootcamp Asst USB created by car?

    I received the message at the opening of Boot Camp-

    "The startup disk cannot be partitioned or restored to a single partition.

    The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Asst Boot Camp to install Windows. »

    My boot drive in the form of a Mac OS extended (journaled) volume, so I clicked on OK, but then the 3rd box on the screen select tasks has been grayed out, so I couldn't check "install or remove Windows 7 or later version, so I let the 1st two boxes checked and ran BCA to"create a Windows 7 or later version install disk"and"download the latest software of Apple's Windows support. After I had option to stop smoking, not install a partition or any other thing.

    Now, when I boot with the Boot Manager, it shows my OSX HD, the EFI boot drive and a Windows disc.

    When I select it, message says «start on Boot Camp Asst USB» created by car... »

    What happens when I leave the reader to perform the installation of Windows 10?

    It will create a Windows partition?
    If this is not the case, where it will install Windows? on my OS x 10.11 startup disk? or what?

    Note: The USB key created by car was created iso Windows 10 that I downloaded as a developer of Windows which can be used without a license key.

    I've used it with Parallels Desktop without any problem.

    Rerun the BCA and check if you can click on only the Option install. If it is greyed out, OS X Terminal, please after the release of

    diskutil list

    Cs diskutil list

  • Try to install Windows 7 via USB, El Capitan, Macbook Pro 2011 but get this error "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

    I am trying to install Windows 7 via USB, (El Capitan, Macbook Pro - early 2011), but this mistake "No. BOOTABLE DEVICE - INSERT BOOT DISK AND press ANY KEY ' when bootcamp restart my macbook to begin the installation. Any ideas?

    You cannot use a USB on Mac 2011 Installer. Please burn the ISO on a physical DVD Windows (a DVD - R Carbon SL on the rate of burning slower is better) and use it to install Windows. The file Info.plist changes only allowing the creation of USB, but does not fully support a USB Installation.

  • G6 notebook pc Pavilion: Hello, I tried to create a bootable USB key to install Windows XP. WH

    Hello

    I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.

    I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen

    By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.

    Product: Model LAPTOP computer: laptop HP pavilion g6
    Product number: QG470PA #ACJ

    OS: Windows 7

    Thank U
    Look: -.
    EDWARD07Hello,

    I tried to create a bootable USB key to install Windows XP. When I tried to copy my files to osi XP USB tool of Flashtoboot my laptop suddenly stopped working with some messages of the blue screen and hit up with a screen that is black with the letter 'J '.

    I restarted my laptop using the power button, but all the time, I get a black screen with the letter 'J '. When I tried Ctrl + Alt + Del screen will blink for some time and time again I get the same black screen

    By pressing the F1 key, I did the test of memory RAM and hard drive memory. Both tests passed successfully. I tried starting the screen remains black local disk.

    Product: Model LAPTOP computer: laptop HP pavilion g6
    Product number: QG470PA #ACJ

    OS: Windows 7

    Thank U
    Look: -.
    EDWARD07

    EDWARD07

    Hello;

    Let me welcome you on the HP forums!

    According to your description, my guess is that the program that you used has replaced the boot files on the hard drive, NOT on the flash drive. Thus, your PC no longer starts.

    To resolve startup problems, you need access to a PC for this phase of work in order to create the necessary support to fix your PC boot loader.

    You will need to create something called a CD-ROM to repair Win7 - which you could have done for free when Win7 was working.  This will repair the boot loader files, and if that is the problem, your PC will start OK after that.

    But now, which can be obtained (with supplement) from this link: http://neosmart.net/blog/2009/windows-7-system-repair-discs/

    When you download this file, it will be an ISO file.

    To make a CD bootable it, you will need to download and install ImgBurn: http://www.imgburn.com/

    Once you have installed, run, select the option "Save image to disk file" and select the downloaded ISO file and that it points to a blank CD.

    To make a USB bootable of it, you will need to download and install RUFUS: https://rufus.akeo.ie/

    Once you have that, it is executed in the input of the unit, use the drop down menu to select the USB stick.  Near the bottom right, where is written 'Create a bootdisk to aid', select the ISO file downloaded.
    -------------------------------------

    Boot from the media that you have created and follow the instructions in this link: http://www.sevenforums.com/tutorials/681-startup-repair.html

    You will probably need to run Startup Repair three times for him to fix all the boot loader.

    Once completed, your PC should start OK.

    Good luck

  • Wizard Boot Camp 6.0.1 does not install Windows ISO 10? Application for USB?

    Hey guys, so I bought this Mac Mini back in September and installed Windows 10 through an iso image on the subject. The problem occurred when everything started trolling. As I speak everything crashing... Same Finder. Then I reinstalled everything lost a part of my data because it does not transfer to the Back Up Hard Drive is correctly. Anyway, now I'm on El Capitan, and I can not install Windows 10 ISO images. He is constantly asking me to have a USB key where previously it was not.

    Everyone knows these issues? I don't really have a USB key, a gigantic 5 TB hard.

    1. in which year is the Mini?

    2 yosemite and El Capitan differ by the BCA UI.

    3 was W10 on-site as an upgrade of an existing W7 / W8 + installation using the ISO? Are now trying a clean install?

    4. your Mac can use either an external optical drive or a USB key (or both) to install the W10.

  • Installed Windows & 32 Bit drivers and USB ports don't DO NOT WORK.

    I bugh a laptop HP Pavillion 14 TS who came to preinstall Windows 8.1 64-bit I hate so wiped the drives and installed Windows 7 32 bit and now I have a big problem.  None of my network drivers work and 2 uSB ports where I plug in my mouse and other devices of SB to do more work.

    I did a back up of the established SW leader who has all the HP dvers for my laptop but will not install the network and video of divers. And when I try to install the drives, I get the error message saying that they are not compatible with this version of Windows.

    I loked on the HP site under my model of laptop that s as above, but HP don't do my notebook drivers for Windows 7 32. And I looked on both the Realteck site for network wireless Realteck and Ethernet Realteck drivers but none of them work or install on my OS. Intel video drivers do not work either. So I'm really stuck one I can not return to 8.1 Windows as if that 32-bit Windows 7 works on my laptop but most of my drivers is not compatible with the operating system and I don't want not to install 64-bit Windows, I like 32-bit.

    Drivers that do not work on Windows 7 32-bit are:

    Realteck RTL8188EE 802 - 11 b/gn witeless lan

    Die Ethernet Realteck and

    Intel High definition graphics driver

    That don't work at all under Windows 7 32 bit because they are the only 64-bit drivers.

    So can you please post me a link network bth and drvers of graphics from Intel that works with my laptop. I tried many different drivers Realteck and raphics for Windows 7, but none of them DOES not work on my system. And none of my USB ports are no longer works. So, how can I fix this?

    Hello:

    Should be no problem to get W7 32 bit to work on this model.

    Just use all the drivers and software from the HP Probook 450 G0 on your model, except the Audio, BIOS and firmware files.

    Your model uses only the Intel HD graphics driver.

    The first pilot, you need to install the Intel chipset installation utility and reboot.

    http://h20565.www2.HP.com/portal/site/hpsc/public/PSI/swdHome/?cc=us&lang=en&sp4ts.Oid=5359407&AC.admitted=1408825729704.876444892.492883150

    Audio: Accept the agreement.  Download and install the driver first on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

    If for some reason, this model Intel HD graphics driver does not work, use this one...

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23713

Maybe you are looking for