install windows 8 on computer hp laptop pavilion 14 ts

Similar Questions

• his quick launch button does not work when I installed windows 8 in my computer hp laptop pavilion dv3z

  1. number and product name
  laptop HP pavilion dv3z

  2 operating system installed (if applicable)
  Windows 8

  3. All changes to your system until the problem occurred
  installed windows 8

  When I installed windows 8 in my pc laptop hp pavilion dv3z, the quick launch of the volume button is always red and the sound is mute... the driver for quick launch buttons and pilot for the sound is also up-to-date... can you help me please?

  When installing the audio driver, it installed following the instructions or mode of compatibility as shown here?

  Based on the software and drivers page for this device, the device was not tested and certified for Windows 8.  This means that some features may not be the same as the device was not designed for Windows 8.  See this site for more information and to find out if it has been tested for Windows 8.

  If the audio driver has not been installed in compatibility mode, I recommend using the 64-bit Windows 7 found here driver and using the related steps above to install in compatibility mode.

  Let me know what happens.

• I install windows xp on a sony laptop. I created a new formatted partition but I get a fatal error message: "syntax error:"D:\I386\asms\10\MSFT\WINDOWS\GDIPLUS\GDIPLUS. " MAN. "

  I install windows xp on a sony laptop. I created a new formatted partition but I get a fatal error message.  one of the components that windows needs to continue Setup could not be installed. Manifest Parse Error: an invalid character was found in text content. Connect the system configuration error: SXS. DLL:syntax error in manifest or policy file "D:\I386\asms\10\MSFT\WINDOWS\GDIPLUS\GDIPLUS. MAN 'at line 0. I bought the oem software installation disc. I bought the computer used and did not get any disk with it. Help, please

  1 person got this response
  Shawn thought it was bad media so I'm a new disc and received the same error does anyone have an idea what might cause this error?

  original title: install windows xp

  Hi sptusch,

  Thanks for posting. Is it a burned disc? If this is you please redownload the image. Also, try the following.

  1. place your Windows XP installation CD and start to her...
  2. Press any button to start the Windows installation (don't worry... we do not actually use the installer at this point)
  3. wait a few moments for the installation program starts, when you see repair an installation of Windows XP using the Recovery Console, and then press the R key
  4. wait until you see this screen, enter the number of your master installation. (Typically 1 to C:\Windows)
  5. press ENTER.
  6. If you are prompted to do so, enter your administrator password. If you don't have one, leave the field blank and press to enter.
  7. from the command prompt, type: chkdsk/r (note the space between chkdsk and / r)
  Allow it to complete undisturbed.
  8. remove the disc, then restart.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• It keeps saying "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. "When I tried to reinstall Windows Vista Home Premium

  I removed the original defective hard drive and installed a new one in my Desktop HP Pavilion. Then, insert Vista Home Premium Recovery Disk 1, then 2 disc. After the prompt to restart the computer to complete the installation of Windows, I got this error message:

  "Windows Setup could not configure windows to run on this computer hardware."

  I then click OK and then this message:

  "Windows is unable to complete the installation. To install windows on this computer, run the Setup again. »

  I have computer knowledge very very basic.

  Please help me!

  Thank you

  Hello

  You will need to contact HP for the problems with the help of the HP restore procedure is not a process from Microsoft.

  You can also try the Forums of HP Support for assistance.

  http://h30434.www3.HP.com/

  See you soon.

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install Windows 7 to an old laptop after upgrade to Windows 8

  updated windows 7 and 8 now try to install windows 7 on an old laptop it installs ok but says it's not legitimate, I know that you can install on 1 computer, but it is off the 1st computer so I should be able to use it on another computer

  When you used the upgrade for Windows 8 to upgrade Windows 7 on this computer, he took the place of the license of Windows 7, which means that you cannot use the Windows 7 license elsewhere.

  The user final license.

  What about upgrading the software? The software covered by this Convention is an upgrade of your existing operating system software, upgrade replaces the original software that you upgrade. You keep all the rights to the original software after you have upgraded and you can not continue to use or transfer in any way. This contract governs your right to use the software to upgrade and replace the agreement for the software that you updated. After completing your upgrade, additional software will be needed for playback or record some types of media, including DVDs.

• How to type the special symbol by computer hp laptop pavilion g4

  Hello, everyone

  I use a computer hp laptop pavilion g4. Is the keyboard doesn't have the NumLock key

  I want to write several special symbols using a combination of keys (Alt + xxx)

  Please show me how to do it.

  Thank you very much!

  The only other option is to use the virtual keyboard in combination with the laptop keyboard.  You can search online to see a lot of different proposals, rather than posting me here.  Here's just one of the examples.

• Can I install Windows 7 64 bit on HP Pavilion Media Center m7540.dk PC operating system?

  Can I install Windows 7 64 bit on HP Pavilion Media Center m7540.dk PC operating system?

  This model:

  http://h10025.www1.HP.com/ewfrf/wc/product?CC=DK&LC=da&DLC=da&product=3225626

  TIA.

  Best regards

  Henrik

  Hi, Henrik:

  Specifications of your PC seem to meet all of the hardware requirements to be able to fully run W7.

  P D 915 processor is capable of 64-bit.

  ( (4M-Cache-2_80-GHz-800-MHz-FSB http://ark.intel.com/products/27515/Intel-Pentium-D-Processor-915-)

  I recommend you max on your memory to 4 GB as a 64-bit operating system requires more memory to run a 32 bit OS.

  A 32 bit OS will perform better on a PC that is running less than 4 GB of memory, unless you need a 64-bit system to run 64-bit programs.

  I would also start the W7 Upgrade Advisor to confirm what I posted.

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Best regards

  Paul

• I forgot my password for computer hp laptop pavilion g6, helps to market!

  I forgot my password for my computer hp laptop pavilion g6, after 3 failed attempts I got a code, 64916634, can someone there help me please? You will be my Savior!

  Hello

  Try to enter: 71674210

  Kind regards

  DP - K

• computer hp laptop pavilion 15-n206sl

  What is the maximum RAM supported by 15-computer, hp laptop pavilion n206sl?

  Hello:

  Here is the link to the service manual for your laptop.

  Info upgrade memory are in Chapter 1, page 3.

  http://h10032.www1.HP.com/CTG/manual/c04016432.PDF

• Windows could not complete the installation. To install Windows on this computer, restart the installation

  Decided to reinstall Vista business after that my lenovo x 200 could not start. After you have reinstalled, had to restart and now it appears

  "Windows is unable to complete the installation. To install Windows on this computer, restart the installation.
  How should I solve this problem?

  Hello

  1. may I know the exact error you received during initialization failed prior to relocation?

  2. do you know the exact reason for the failure of start?

  I will be asked to get in touch with the manufacturer of the system on this issue.

  Installation and reinstallation of Windows Vista, you can fallow the article below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3

• Try to install Windows Media Center on my laptop but I don't know where to buy it.

  original title: Hi Please help

  I am trying to install windows media Center on my laptop but carnt find any where to go. all I want to do is use with my xbox any help guys, thanks

  Hi, Matt.
  You can't 'install' Media Center - either you have it, or you don't have.
  Media Center is included in all versions of Windows 7 Home Premium on-site (except for certain markets (Europe and the Korea come to mind), where it is not included by default (but there is a pack for this.))
  If you have the Starter or Home Basic, you must make an Express upgrade to Home Premium (or higher).

• Windows could not install windows on the computer

  husband tired of reformatting my computer after a few problems. The problem started after trying to do an update and the update has been slain at 40% and it has restarted computer and it wouldn't restart. Tried to go on safe mode and tried other things. He did come back to windows once, would not work usb. We have tried to restart the computer and it n go back t widows. We have tried to reformat, let it go overnight because he was taking forever. He said that windows does not have can install windows on the computer. And invite you to try again. What is the problem? Anything we can do? It has been 3 days trying to do things with her.  Can we get the new windows 7 and try of ti which install?

  Thank you

  Danielle

  Hello

  Here's how to clean install vista

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

• Windows could not complete the installation. To install Windows on this computer, run the Setup again.

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hello, here is the thing.

  Reformatted a computer with recovery discs...

  Office to the top and everything looked ok...

  Windows Installer started and makes the computer reboot several times as usual.

  BUT NOW I have a black screen with a window saying "Windows is unable to complete the installation. To install Windows on this computer, run the Setup again. »

  I opened the Task Manager and closed a 'runonce' process, which got the Explorer will... But shit message will not go away, if I close the computer restarts!

  Why did I get this? How can I make them disappear? Windows has not installed correctly? Do I need to install any additional substance to compensate for this?

  + I just noticed there is no partition for recovery in my computer... you know? This thing of 2 GB next to Local disk c

  Hey Abraham G

  you use discs of recovery that are made for your brand and your computer model

  and if you have problems using the manufacturer's recovery disks, you will need to communicate with them about

  It's their recovery process not microsofts

  Walter, the time zone traveller