install xp instead of vista and now the recovery discs are not supported

Similar Questions

• Installed a new wireless router and now the wireless printer does not work

  We installed a new wireless router and now our Dell V305 will communicate or print with our laptops.  Any help apprecaited!

  You re-configured the printer to work with the new router wireless? Boulder computer Maven
  Most Microsoft Valuable Professional

• Renistalled Vista and now the keys FN and so does not work.

  I recently reinstalled Vista and now the FN keys and thus won t work and the drivers offered on the Toshiba site aren t install properly, and I have also 2 unknown devices in my device manager could it so those?

  Any help would be greatly appreciated!

  Hello

  I agree with the user above.
  The driver for the touchpad control touchpad and value added package (VAP) must be installed!
  Some series of portable need for the utility of Flash Card Toshiba in order to get the FN keys works! But not all
  Then take a look at the European Toshiba driver and driver page, if you could find these drivers

  Welcome them

• updates installed live mail and now the spell checker does not work

  updates installed live mail and now the spell checker does not work

  You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type.

  
  

  • I just installed Windows 7 of Vistea. Now, the cursor jumps around when I type. He
  How can I fix t?
  Thanks for a much improved product.

  This thread is perhaps relevant: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/3b935c1e-9c66-4236-93e8-b3356bfbb7c7 TaurArian [MVP] 2005-2010-implementation to date of Services

• Cannot get pse10 to take my styles, have had some PES 10 for 2011 pse13 bought and installed, uninstalled pse10 inorder to get pse13 to install easer, I reinstalled pse10 but now the stules I do not appear in the effect section. I checked the two section

  Cannot get pse10 to take my styles, have had some PES 10 for 2011 pse13 bought and installed, uninstalled pse10 inorder to get pse13 to install easer, I reinstalled pse10 but now the stules I do not appear in the effect section. I checked the two sections where the styles light up on windows 7

  I suggest that you need to reset your preferences file by using this method:

  Start PSE10 until the Welcome screen.  The home screen looks like this:

  

  When you are in the Welcome screen, press first Ctrl + Alt + Shift + AND click 'change' to get a different dialog like this:

  

  You must click Yes and you're done.  This particular area is sometimes hidden, so you will need to drag the homescreen on the side with your mouse a #to make it visible.

  I hope this helps.

• I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do

  I upgraded my dell e1705 inspriron from xp to vista and now my cd/dvd does not, in my opinion, driver is missing... what I do

  See this article would allow:

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

• HP S3120N. I replaced the motherboard and the power, now the recovery disks do not work.

  I'm not so happy owner of a HP Pavilion S3120N. I am running windows vista home edition. The motherboard went out so I replaced it with a Zotac GeForce 8200 - ITX Wifi series. Now the computer says it is noa a hp solution valid, and the recovery disks do not work. is there a way to fix this without buying a new operating system?

  Yes, return the Zotac motherboard and get an OEM HP/Compaq M2NC51-AR / HematiteXL-GL8E motherboard. I know that's not the answer you want to hear, but the recovery discs are locked to a specific set of HP/Compaq machines with specific HP OEM motherboards. Apart from this, you will need to buy a new OS.

  Frank

• Help! Went to format my D recovery drive and now the recovery partition is gone!

  Hi everyone, thanks for reading and I would really appreciate the help! I use a HP G32 laptop, Windows 7 operating system. n in the middle of trying to free up space on recovery drive D, I went to the format is gone and now the recovery and empty of my D drive partition! Tried to retrieve the file, but to no avail! No idea what I can do? Thank you very much!!!

  That's what does_removes put in shape all the files. You burn your set of recovery disks? If so, you can start their relocation back to factory specifications that will recreate the recovery partition. Please note that this format the entire hard drive, which means that you save the files, photos, etc. before the race. If you burn your recovery DVD set, that you can order from HP for about $20.

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• Photosmart D110a: installed the new HP black ink cartridge and now the black ink does not print

  Just installed a new print 60xl cartridge to replace the one that was being ink. Now the black ink basically does not print. I cleaned the cartridges 4 times and run all Diagnostics pages. The black prints just a small piece of the upper part of the letters on the pages of diagnostics and in grayscale on the test pages.

  Hello!
  Welcome to the HP Forums, I hope that you are @janmacwill,

  I saw your post on the black ink does not print your Photosmart D110a and I wanted to stop making you share my suggestions. See the link below to solve the problem and if the black still does not print, contact HP (below) to see about a replacement unit.

  Printer prints a blank Page or doesn't print black or color ink for the printer series HP Photosmart e-All-in-One (D110a and D110b)

  If you have trouble, let me know and I'll do my best to help.

  Hit the "accept as Solution" if we reached a solution and the "thumbs up".

  to say thank you for my help.

  Have a wonderful day

  HP technical support are available by clicking on the following link:

  http://h22207.www2.HP.com/us-en/?openCLC=true

  (1) once will open the support page please select the country in which you are

  located. Then enter your model of HP on the right number.

  (2) then choose the 'Contact Support' tab at the top and scroll down to the

  bottom of the page "HP Support - Contact" to fill in the form provided

  your contact information.

  (3) Once finished, click the "Show Options" at the bottom right.

  (4) Finally, scroll to the bottom of the page and select ' Get phone

  number. "A file number and telephone number will now fill for you.

• Used the update and now the video card is not recognized

  I updated updater manual update and have not updated anything since early December, 01/30/10 I installed the 5 important updates that were listed, I don't remember who they were, after installing the computer needed to restart and after the recovery, the video card is no longer recognized.  I get the BIOS beep code for no video card or bad video memory.  I know that this seems to be a hardware problem, but this computer worked fine until these updates. Now that the video card is not recognized, I can't even get into the BIOS, and still less actually starting windows. Any help/ideas what caused this and how can I fix this are greatly appreciated, thank you very much. Even a list of the latest important updates might be useful, I can't seem to find a list of anywhere.
   
  System-Vista Home Premium 64-bit
  Palit-card nVidia GeForce 9600 GT graphics card

  Oh and I took out that graphic card and put in a different one, nVidia PNY GeForce 7900 GS and always get the same error code. I also disconnected and removed the battery from the motherboard to reset the BIOS, still the same problem.

  Hi JohnyDick,

  This problem seems to be due to the updates of Windows, although it could be a coincidence.
  I first you recommend to remove the nVIDIA graphic card and connect the monitor to the onboard graphics card, then try to start the computer.
   
  If the problem persists then I recommend you to contact the computer manufacturer for assistance.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Tecra A9 came with Vista and XP, the disks - but can not activate XP

  Hello

  I have a Tecra A9, it came with Vista Business pre-installed and on a recovery disk. It also came with a XP Recovery disk.

  Part of the documentation in the box suggests that I should be able to simply install XP from the recovery disc. I tried this, but I can't activate XP. I called the number of Microsoft on the activation screens and entered all the numbers, but I then told me that there is an error and I should change my product key.

  My laptop on a a Vista product key stuck on the bottom. So, I seems to be a little stuck.

  The sheet that was in the box says:

  "it's additionall equipped with a Windows XP Professional Recovery DVD - ROM that allows you to easily install this operating system on your own. To do this, follow the instructions on the packaging of the DVD of restoration"

  Usefully, there is no instructions on the packaging of recovery DVDs, I expected maybe a XP product key or something... But clearly not.

  How should I proceed?

  Thank you

  Hello

  Sorry, but I'm a little confused. As much as I know Toshiba recovery image should not be enabled and if you please be so kind and explains what exactly happens when you try to use recovery media?

  On what stage you must enter the product key?

• Reinstall Windows 7 and now the activation code does not work

  I upgraded my PC with an AM2 chip to an i5.  I had to reinstall windows and now my activation code does not work.   It's like 2-3 years, I forgot when I built the computer.  It installed on my other windows 7 install and created the windows.old folder.  How can I get reactivated?  I used the same code since I built my computer.

  Thank you

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Reinstalled Windows 8 and now the product key will not work.

  Original title: about product key

  I upgraded from windows 7 Home Basic for wondows 8 pro.

  n the day before my bones broken coz I rights os partition, then I installed again by making the USB bootable iso file of windows 8.

  and now the quiality key that I brought does not work...

  What to do!
  Help!

  Hi James,

  I suggest you to see the following link on how to install Windows 7 using the recovery disk.

  Installation and reinstallation of Windows 7 (Windows 7 reinstallation)
  http://Windows.Microsoft.com/en-in/Windows7/installing-and-reinstalling-Windows-7

  Once you install Windows 7 on the computer, then you can perform the upgrade to Windows 8 and then activate Windows 8.