installation a hp deskjet f4480, when I plug in the usb cable, my computer cannot find the printer.

Similar Questions

• Installs the ESC/P-R instead of the Epson Stylus CX4800 printer when I plug in the printer.

  Original title: ESC/P-R installs, instead of CX4800.

  My work computer has been upgraded to Windows 7.  When I plugged my printer Epson Stylus CX4800, he installed ESC/P-R.  I went on the Epson site and downloaded the correct driver, but he continues to reinstall the ESC/P-R.  I tried to add manually, but since it connects via USB, it does not appear in the list as a choice.  Any suggestions?

  Thank you for your answer!  I had to work, but not exactly with the steps you described.  I did not know exactly if the uninstall of the printer actually removed the drivers and didn't know how to manually remove printer from my computer drivers.  What I did was downloaded from the Epson site 'drivers and utilities package' for Windows 7, and not only the printer drivers.  Once downloaded, I ran it and it is installed the correct printer.

• my screen goes black when I plug in my HDMI cable

  I have never had a problem with the help of my my TV HDMI cable to watch movies from my laptop.  I do not know whether the windows update is causing this problem, but when I plug in my HDMI cable to my laptop, the screen goes black and the TV receives no signal.

  Hi, I had the same problem when I plugged the hdmi for the first time that I chose the 'graphics options-> output-> TV' at first by right-clicking on the desktop. Later I selected "change pc settings" section of charms and the selected tab devices add a device and while the laptop was looking I have connected the hdmi cable. This is how I got to the TV screen.
  probably, you will need to turn off the TV and the laptop first. Then put on the tv and select the desired hdmi option before you put on the laptop and pressing on the ' logo window + p "or"fn + f4"keys. Lets c if it works

• When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?

  Original title: BAD USB

  I have an Acer netbook. I was able to download my photos from my computer on a USB key until a few days ago. When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?  Why does it say this?

  I am confused with this... I really hope someone can help me.

  Thank you for your time in doing

  Dido

  Hey Toni-LeeFurlotte,

  ·         Have you tried to connect to a different USB port?

  Method 1: Try to connect the USB key to a different port on the netbook and check the issue. You can also connect the drive to another computer and see if the problem persists.

  Method 2: Update of the netbook with the latest chipset drivers. In addition, install other updates of the device driver. Log in the Web site of the manufacturer to do the same thing.

  Method 3: This problem can also occur if there is a drive letter conflict. A drive letter conflict occurs if the disk that is affected by the error is mapped to a reserved drive letter. I suggest you try to change the drive letter.

  How to change drive letter assignments in Windows XP

• When I plug my blackberry phone to my computer dell laptop it dosent conect

  When I plug my blackberry phone to my computer dell laptop it dosent conect him what my problem

  Hello

  1. you receive an error message when you connect the phone to the laptop?

  2. What is the serial number and model of the blackberry phone?

  3. you try to connect the phone using the USB cable?

  4. don't be other devices not detected by the laptop?

  You can try to connect the phone to another laptop or a computer running on Windows 7 and check if the device is detected or not.

  Method 1:
  You can also view the steps provide in the link below in case you use a USB cable to connect the phone.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  You can also try to download the last set of drivers for the phone, and then try to connect and check if that helps.

  https://swdownloads.BlackBerry.com/downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22&CPID=OTC-SOFTWAREDOWNLOADS&CP=OTC-SOFTWAREDOWNLOADS

• HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter

  The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).

  (1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.

  (2) I tried to change the power adapter too.

  The problem is that it is.

  Your advice is very much appreciated.

  Thank you best regards &,.

  Zia

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  It seems that you are not able to turn on the laptop and tried to solve the problem

  Please perform steps listed to find out if it is a hardware or software problem below:

  1. remove all cables and devices, disconnect them and try to turn on the device

  2. check the LED light situation and ensure the action of the spring button / stop is normal

  3 Exchange with a well known power cord and the AC adapter

  4 Pack no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  5. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Make sure that there is no spill of liquid or cutting

  6. check if the Port of the AC adaptor is loose/broken

  Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit

  Hope this helps for other queries to answer the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• HELMET No. Smartphones blackBerry icon when I plug in the BB Bold 9900 helmet. Help, please!

  Hello

  I just got my new BB bold 9900. Has updated the OS to v7.1.714. Now I see not a helmet on the homescreen icon when I plug the headphones of BB. Although I get sound when I plug from the 3.5 mm plug.

  Another issue is when I receive a call I am not able to hear the call, ringing on the headset, rather that I hear from the speaker as I would when no headset is plugged.

  I heard that it is a common problem when an upgrade of the OS is made. Is there a solution? Help, please!

  Hello crazygamerg7,

  Welcome to the BlackBerry support community.

  Thank you for your question about the helmet on the BlackBerry 7.1 software feature.

  The headphones icon should only appear in within the phone application and not on the home screen when connected and on a call.

  The ringtone will also go through the speakers of the device and not on taking 3.5 mm connected headphones. This is normal.

• I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• Spoolsv.exe has 99% of the cpu when I turned off the printer after printing.

  Original title: spoolsv.

  I recently installed a new printer Lexmark Pro715.  Everything works fine, no problems with printing, but as soon as I put off the printer after printing, spoolsv.exe takes 99% CPU.  If I leave the printer in mode 'sleep', the problem is, but I do not often print, I prefer to turn off completely.  There is nothing in the print queue, everything else seems normal.  I can use the Task Manager to stop it, but this isn't a good solution in the long term.  I run MS Update and uninstalled and reinstalled the printer, with no effect.  It's driving me crazy.  I have Windows XP Home Edition SP3.

  From what I've read on the Internet about the print spooler using 99 to 100%, Norton is also sometimes involved as a contributing factor to a runaway print spooler for some people (where my request).

  IIRC, people would set their Norton to start a scan and when it was made, the print spooler has run amok at 100%:

  "Because I have Norton Antivirus, do a system scan every Friday night that I happened to see that the value SPOOLSV. EXE is using almost 100% of the CPU of the morning Saturday. It's the only time that it happens, so I simply stop the process in the SERVICES window, and life is good. I don't know why Norton Antivirus it triggers during the scanning process that I couldn't find anything on the Symantec relating to this site. »

  If the problem resurfaces surface, using abduction special tools on their website, you can uninstall your Norton and view the appearance of things without him - you can always reinstall again once, right?

  I disagree with Norton in general for its CPU and memory hogging and known interference with other XP processes (such as the restoration of the system), so I'd keep which in mind if the problem returns.

  A few years ago, I used to like Norton correct, but will never go back or recommend it.  Microsoft Security Essentials with it's lower overhead and footprint and some regular on the analyses at the request of the MBAM and SAS should hold your own system based on your surfing habits.  Your system will reward you with an improvement in the overall performance of the system as well.

  I can tell you that no single AV tool seems to know everyting so it is safe to use several respectable scanning tools.  Norton certainly doesn't know everything.

• I started to get a red message box when trying to get updates... "windows cannot find updates" error 80070490

  I started receivine a red message box when trying to get updates... "windows cannot find updates" error 80070490.  I tried this fix only displayed in this field of the error help and have downloaded the fix - it Center, and he is unable to perform the task.  Please let know us what I can do.  Thank you

  Hello

  Please see the following Microsoft KB article:

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates:

  http://support.Microsoft.com/kb/958044

  Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.

  I hope this helps.

• printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  printer HP from Mac 10.5.8 deskjet 970cse how to set up the printer for the printing of the project

  Hello

  You can find out how to access and change the settings of quality below:

  http://support.HP.com/us-en/document/c01662356

  Kind regards

  Shlomi

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• Put in cartridge error when I power on the printer.

  Original title: printer problem

  When I turn on the printer displays a message that says: cartridge error: refer to device documentation to troubleshoot. What are the steps to

  find this reference and have the printer professional and online not offline?

  Based on another post where you declare that you have a printer HP 5610 Officehet, there are HP support at: http://h10025.www1.hp.com/ewfrf/wc/product?product=441125&lc=en&cc=us&dlc=en&lang=en&cc=us

  A more specific section related to the error messages displayed on the printer (including errors of the cartridge is at: http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=59292&tmp_task=solveCategory&cc=us&dlc=en&lang=en&lc=en&product=441125 )

• User of Photoshop CS6, it stops when I click on the "Print".

  
  I use Photoshop CS6.

  It isn't working and stop when I click on the "Print".

  Please check and answer for me.

  Hi eunyoungp,

  You can try two things there.

  Reset the Photoshop preferences to default (start the application all holding the key Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS).) Then, click Yes to the message, "Delete the Adobe Photoshop settings file?")

  Secondly, uninstall the driver printer & software, restart the machine and reinstall drivers updated from the manufacturing site.

  Let us know if that helps.

  Kind regards

  Mohit

• Have renewed my subscription ExportPDF, but still pop up with window 'your course has expir├⌐' when will convert via the printer driver window. Comments / help welcome thanks :-)

  Have renewed my subscription ExportPDF, have the confirmation e-mail, but still up pop with window 'your course has expiré' when will convert via the printer driver window. Comments / help welcome thanks :-)

  Hi azza675,

  ExportPDF converts PDF files to Word and Excel formats (and many others). What you describe, sounds like you are trying to convert a file * to * PDF. Have you ever started a trial of Acrobat, maybe? (So that you can create PDFs with Acrobat, ExportPDF don't allow you to convert files to PDF.)

  What happens when you connect directly to ExportPDF to https://cloud.acrobat.com/exportpdf?

  Best,

  Sara