Installation interrupted and stuck at the recovery screen

Similar Questions

• Windows 10 boots and stuck on the black screen with high CPU

  Hello

  I have a MBP 15 "mid 2015 16G with AMD R9 M370X i7.

  I've been running bootcamp with Windows 10 installation for about a month now without any problems.  However, yesterday 10 Windows started and has been blocked in a black screen (before any screen logo or connection win) with the CPU works hard and hot.

  1. I tried to restart some time hold button / stop and start with the option key, key and then selecting the windows bootcamp partition but it drove the same black screen with CPU hot work in the background.

  2. I can always start OSX fine during this period.

  3. I tried to leave in the black screen for a good 10 minutes, but it does not change and the MBP gets really hot.

  4. I tried clearing NVRAM with Boot option + command + P + R

  5 I can't in Windows 10 safe mode using F8 or FN + F8 after you select windows to boot manager (starting with the down option).  Am I missing something here?

  I don't have a copy of Installer windows 10 with me right now unless someone can tell me how to create one under OSX.

  I searched on the internet forum and apple, but have not found a solution that works for me.  Many speak of win10 black screen with cursor showing, but my question is just a black screen with no cursor.

  Someone at - it other ideas besides reinstall Windows 10?

  You have a black screen with or without power adapter, both? If 10 Windows does not start correctly three times, it should bring up the recovery console. Windows automatic updates are enabled? You have created/activated Windows system restore points?

• Keyboard not working on Lenovo Windows laptop and stuck on the login screen

  I have a Lenovo WIndows 8 20157 laptop, the keyboard no longer works someday so I restored it.  At that time, I could use an external keyboard.  When the system rebooted, it got to the login screen and will not work.  The screen keyboard and the external keyboard does not work.  The only thing that happens when I use a keyboard (external to the screen, laptop), is that if I hit the button S power options developed.  I can not connect and I can't run it in safe mode.  Already, I have removed the battery and held down the power button, which has not changed anything.

  I took it for someone who told me to restore to factory settings and there are drop down menu in the corner of the login screen, but sometimes the mouse works and sometimes it isn't.  For example at the moment I can't open easy access menu to open the keyboard screen, but sometimes I can't.  Any ideas?

  Hi Jennifer,.

  Welcome to the Microsoft community.

  According to the request, you have problems with the keyboard on your Lenovo laptop.

  As you have made a number of steps to address this issue including restoration to factory settings, I feel that this could be a hardware problem, so at this point in time that it would be better you contact Lenovo for additional troubleshooting support.

  See the link below for contact Lenovo support.

  http://support.Lenovo.com/us/en/contactus

  I hope this information helps, please get back to us for further support on Windows. We will be happy to help you.

  Thank you.

• I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility.

  I have a Macbook pro (2011 model). It gets stuck on the start screen on to half way through commissioning. This happens whenever the mac turns on. The problem is solved when I reinstall Yosemite to boot to Recovery Mode disk utility. However, the next time you start, the startup process is blocked to halfway to new (on the screen with the toolbar and the status of apple). I want a more permanent solution to reinstall the operating system every time. Would appreciate someone's suggestions and thanks in advance.

  Replace your hard drive.

  You have a backup of trust? If not, buy a disc of exterrnal for that as well.

  The progress bar from the left end at the beginning of the commissioning indicates that your drive has been so damaged, it could not be mounted. Five minutes of progress bar is shown as it does the equivalent of disk utility (ERD [Directory]). If you have reinstalled several times and the problem is not fixed, your drive is in solid form.

• SANSA FUZE stucks to the first screen and nothing happens

  My sansa fuze aprox 2 years. It was incredible in the first year that someday when I connect it to my pc it stuck to the logon screen but you screen looks like weard colors not correct letters sansa and low resolution. I tried all the instructions but its not responding do not at all. I downloaded the recovery tool, but because of sansa works not at all my pc could not recognize it.  know that I don't know what to do I'm living in Turkey and a friend of mine reminded my sansa in chicago. I bouth an I phone 3G and I am happy with my MP3 in there but I want to give my sansa to my mother to allow him to listen to the music. but as I told you its does not work at all!

  Help me please, or tell me that you're not good enough to produce a good player.

  don't missunderstand me I like sansa memories, they are THE BEST!  but not all companies can produce good mp3 and video players. I can understand if SANDISK is only a producer of memory company!

  Thank you Bob for your time

  Unfortunately still I coulndt see any connection after I hold this button Center of 5 minutes.

  because there was no link I coulndt try the next step. I offered to send my sansa player to the factory. now I'm wating ansver I will donate my reader to the company to help and protect their customers from this issue.

  I think that there is no solution for me here...

• I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please advise...

  I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please notify.

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and

  The Adobe Desktop installation program will not load the app screen tab, all I see is the loading icon and runs continuously without ever loading. All the other tabs seem to load without any delay, only the app tab does not load. I tried to uninstall and reinstall the software, rebooted a couple of times and tried to activate the download of the Premier Pro via the website, but it still doesn't load in the desktop application.

  This solved the problem for me:

  Use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Product key not recognized during a repair of xp pro sp2 on a genuine xp pro sp2 disk. stuck on the main screen of the product.

  After starting problems on my Toshiba satellite with xp pro sp2, I booted my xp pro sp2 disk and did a repair instead of a reinstall software.  He went through the motions, removed the sys files, copied them back and so on.  Then he asked my product key and I typed in it and it does not recognize.  It's a real bought copy of xp pro sp2.  Now, I'm stuck on the main screen of the product.  When I start the laptop on the xp disk it blue screens, the only option I have is to enter a product key in the configuration...  I have my receipt for my xp pro disk and product key for certification sticker.  Help, please!

  "XP MCE Pro? That is not normal! It would be one or the other (AFAIK). Here is an example:

  http://cdn2.ioffer.com/IMG/item/811/353/46/o_XyuQav94U1MQ0Ci.jpg

  If the hybrid you mention is the real thing, it's new to me! I know that some have described as a superset of Pro MCE, but I never used this version, so I can't tell you definitively that a COA sticker wouldn't this combo of terms...

  In addition, the term 'Enterprise Edition' implies something not legitimate. I do not think that Microsoft has never used the term marketing for Windows.

  If you had a legitimate retail version of Windows XP (any version) that is not used on another PC, you can perform a Clean Install (not a repair installation), using this key (not the key COST laptop). The only way you can use the key from your laptop COST would be if you used the correct installation CD - a generic OEM version of the corresponding XP (MCE?) version. In this way, you can perform a clean installation or a repair installation.

  Have you looked at the links I posted? What do you mean by "boot option? The instructions were to press the zero key while turning on the laptop. You are not supposed to enter the OS! The recovery partition is quite distinct.

  If your laptop does not a recovery partition, you should be able to get the correct recovery CD for this Toshiba - by Toshiba or you might need to find a reputable eBay merchant, etc.. Restoredisks.com, who has a good rating from Better Business Bureau, they probably sold too.

• Vista stuck on the home screen, impossible to connect

  The problem came from last night after that my computer had a blue screen and proceeded to do some sort of system dump or something like that. Subsequently, I have been unable to connect to one of the five accounts on the computer because it stuck to the home screen after clicking on the account. The little blue circle would continue forever. The computer works fine in safe mode, but I tried a clean boot with MSCONFIG and it still doesn't work. Any ideas? In addition, CTRL + ALT + DELETE DO NOT solve the problem.

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do the restore of the system in Safe Mode, you cannot do it in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Stuck on the profile screen after Windows update

  After that a windows update last night, my computer is stuck on the profile screen and I can not connect.  By clicking on the icons for different accounts does not bring to the top of the login screen where I can enter a password. The screen just flashes and the wheel spins for a while and then comes back to the profile screen. I tried to boot into the different security modes but same thing happens and I can not connect. I also tried to fix the computer and restart at the last known good configuration under boot options with the same results. Short to reset the default settings that will erase all my data, (which may or may not work) is there another fix?  It seems that windows is starting up, but just the login screen appear so I can enter my password.  I have windows 7 Home premium version.

  Hello

  Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem.

  If the Panel username and password is not displayed during logon and the problem persists even in safe mode, then the question could be if there is a corrupted file system or some third party conflicts.

  I suggest that you want to run auto repair with installation media and see if it helps you repair system files. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 and you have the product key and then the link provided below might help you to download and create installation media if you do not.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Satellite T130 - stuck on the loading screen - new hard drive required

  After a message on the screen saying back up your hard drive, it will fail quickly and pressing F1 it seems so stuck on the loading screen. I'm not too good with computers. I just have to buy a new hard drive to get the laptop working again, or is much more complicated than that. My guess is this one.

  Thanks in advance for any help provided

  The first question is: did you create recovery media (USB key)?
  If do not do this if for a long time your HARD drive works OK. original recovery image is saved on the HARD drive, but you must have it USB backup that you can use to install if the disk needs to be replaced.
  Do it as soon as possible. More info on what you can read in s operating manuals.

  What to do with the HARD drive? In my opinion if long as it works it has no reason to panic. Use your laptop as usual. If you notice some performance or more error messages problems I think that you should replace it.

  Replacing the HARD drive doesn't have to be so problematic. HARD drive cover must be placed in the lower corner of your laptop. The smallest is RAM and cotyledon should be for the HARD drive. Check it out.

  Before do you that this is remove the battery and unplug your computer laptop AC adapter / CC.

  If you have no experience with such things please don't made some risky step. You can damage something.

• Envy 15: Stuck on the HP screen

  Good so recently I accidentally leave my laptop ran out of battery. I've loaded and started upward and it's gone through an update of windows then stuck on the loading screen HP during auto restart during this process. All I see is black HP logo and the white dots circling below until after a few seconds the HP logo becomes, but the indirect approach points continue.
  
  I did a hard reset but it changed nothing. I also ran each test system, it won't let me in the menu diagnosis and has passed everyone, including 2 extensive system testing.
  
  Whereas this problem is usually either a broken hard drive or fixed with a hard reset I am at a loss for what to try next. It's a HP Envy 15 with Windows 10 - 64 bit.

  Hello

  Try the following.

  First, use another PC to create a bootable Windows 10 DVD or a USB Flash drive via the following link.  Under the section "Imperative to create a cable USB, DVD or ISO", download the media creation tool.

  http://www.Microsoft.com/en-us/software-download/Windows10

  Once you have it, run the tool, select 'Create the installation media for another PC', then select the language edition of Windows 10 and 64-bit.

  Follow the rest of the guests to create this and then click on finish when done.

  Insert the Installation of Windows 10 support and stop the laptop by pressing the power button for 10 seconds.

  Click next to the ESC key as soon as you press the power button to enter the Boot Menu, and then select the Boot Options Menu ( f9 ).

  Use the arrow keys to highlight the CDROM (uefi) or USB Flash Driver (uefi) option, according to the type of media you created, then press on enter – if you are prompted to "Press any key to continue...". "- make.

  Start on the Menu of Boot Options Advanced - see Option 5 on the link below for more information on access to this.

  http://www.tenforums.com/tutorials/2294-advanced-startup-options-boot-Windows-10-a.html#Option5

  Then try to run the Windows system restore to return the laptop to a point in time before this problem occurred - see Option 1 on the link below for more information on this procedure.

  http://www.tenforums.com/tutorials/4588-system-restore-Windows-10-a.html

  Kind regards

  DP - K

• The Cliq is stuck on the start screen.

  Hey guys, after a normal day of use with my Cliq from 07:00 I got around 17:00 and put it on the charger, as it was almost dead, I went to charge less than an hour with it and now it is stuck on the start screen of Motorola with the small black bar on the left. I charge my phone all night every night and do not use it much at all, but it lasts and I wasn't there to look at what had happened, so I don't know if there was any discrepancy prior software other than seeds from basic mentioned by others.

  Charles, you are still able to boot into Recovery Mode and learn the triangle with the exclamation point? If you can, press the keys ALT and L at the same time to access the Recovery Menu.

• BlackBerry Curve 9300 Smartphone does not start. Stucks at the splash screen

  Hello

  I have a brand new Curve 9300, and within a week he is a. I updated its OS to version 6, and it worked perfectly.

  When I tried to configure my email, he asked automatically updated with the installation of my e-mail service provider software. I chose just ok. I received three warning messages, which I don't know exactly but it was something may not work correctly (with respect to the difference in version). I just kept facility, and he asked to reset.

  When I restarted the laptop, it goot stuck to the start screen. Then nothing! The thin status bar below fills BlackBerry logo until either full, nothing happens. When I wait more long (a few minutes), I get a message on a white screen with a small font with "App Error 606", with an option to "RESET".

  I took out the battery and restored a few times, nothing different.

  Notes:

  • The LED does nothing, except for a single red wink when it restarts
  • The keboard seems to be sensitive. I get the Alt and shift indicators at the top right when I press on the
  • The power button does not appear to cause any response

  I appreciate your help.

  Edit: Desktop software indicates that the device is not connected, even if it is attached to the USB cable.

  Edit: The combination Alt + Shift + Delete causes the system to go to a blank white screen with this "app" error mentioned above

  You use BBSAK or JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

• My mouse is stuck on the main screen (add pictures)

  I'm used to 2 monitors, and I want to keep it this way. So I implemented a QUANIX monitor I have via HDMI to my Sprout.

  I have extension success of two monitors. but my mouse cursor is stuck in the main screen of Sprout.

  If I drag a window to the next screen, the window can move to the second monitor. but my mouse cursor is stuck on the first monitor.

  How can I solve it?

  Please help me... T_T

  (You can see in detail through below the images)

  monitor 1: HP all-in-one

  Monitor 2: horizontal HP

  Monitor 3: MON-SIS330 (QNIX QX2400)

  Current value of monitors

  

  captured when dragging a window to the next monitor

  

  I can find the solution to another post. Sprout Service stop and I can't success using extended display.