Installation Kit SSD instead of on DV6-6011TX DVD player
Can someone please make me if it is possible to replace the DVD drive on my DV6-6011TX with a SSD drive (+ kit to install)?
Any help will be greatly appreciated.
Thanks and regards,
Babur
Yes it is possible, but the interface to the optical drive is probably not as fast as SATA connections hard disk because it does not need to be. You would be much better to install the SSD as drive and put a standard mechanical spinner disc into the adapter of optical drive for storage purposes. Put an SSD in there is somewhat a waste.
Optical drive is 12.7 mm thick if you need this card:
https://www.jacobsparts.com/items/HDDBAY-01/
If it's 'the Answer' please click on 'Accept as Solution' to help others find it.
Tags: Notebooks
Similar Questions
-
Recently, I have restored my computer dvd6-6c63cl of flag State 'out of the box. The dvd drive no longer works. When you put a CD, you can hear him swirling but the screen does not open. In addition, in the Device Manager section, dvd is not listed. I think that I need the drivers, but I did have luck to find them on hp.com (just a recovery disc, you can order).
I tried some of the solutions on this forum for other computers, but is it didn't work (FixIt) or things in the registry (filters) were not there and one was something that was 32-bit and since it's 64-bit, I was afraid to try it. Clearly, I don't know enough about computers.
In which case it is important, I recently had my fan replaced and do not know if the dvd player worked after that. Obviously not used often.
You can provide any help would be greatly appreciated. The computer is 3 years old so I don't want to add 'guaranteed' type plans, but at the same time, I don't want to replace the computer for something so little. The restoration of fixed the problems I had (internets public wouldn't connect and updates did not exist). Thank you!
You may consider replacing the internal DVD player or using an external DVD burner.
-
Original title: clean install Win 7 64 bit
Like others, I have a problem with a clean install of Win 7 64 bit Proffesional. I have a Samsung NP900X4C laptop (with a 256GB SSD installed) and screwed up through the installation of Win7Prof instead of the upgrade. A lot of the buiult in functions do work not (Wireless; Hiring of video, USB Ports etc.) and to top it all off I get now blue screen errors...
If installing from an external DVD drive, crosses, it shows that the HARD drive has already 4 partitions.
Partition 1 (e :)) Disk0
Disk0 Partition 2
Disk0 3 (C :) Partition System
Disk0 Partition 4 hidden OEM Partition.
So far I have just selected Heve installation on Partition 3 C: System.
Y at - it a utility that I can use to retrieve the data from the OEM Partition I want to return to the initial state by default if possible.
If not what is the best utility to use repartition (how many and what size?) and format the HDD.
Cordially chrisxsmith
The best you can do is to contact Samsung and request recovery media to restore your system to its factory default state.
Call Samsung to get a recovery disc - to find a phone number for your location:
Thank you Andre, very appreciated, unfortunately Samsung and their Tech Support here in the UNITED Arab Emirates was not as useful.
I managed to keep the button restore during the 5 sec boot process that initiated the request 5 restore Samsung which was then able to take the original installation of the hidden Partition image.
Fortunately the issue is resolved.
-
Satellite 5200 701 SSD instead of HARD drive
I have a 5200-701 and the HARD drive has a large number of bad sectors. So I would use a SSD instead of the HARD disk on a regular basis. Anyone know who is real and compatible? I also tried to install Vista but after start of the cd, the installation of vista tells me lack driver CD/DVD. I have a TEAC DW -? and vista seems to have problems with loading the atapi driver right?
Do you mean that you want to use the Solid State Drive?
HM, I think you're the first person here who would like to use this drive in this old notebook.
To be honest I don't very well if you can use and if the BIOS support for m.
But this is only a suggestion.In addition you must known that Vista can not be installed on each laptop. Vista needs a lot of resources and it s really counterproductive using Vista on this laptop because everything runs slower than using the other OS like Win XP for example.
Finally and above all the Vista already contains the CD/DVD driver. It of a Microsoft driver and it s is not necessary and not possible to install a special driver ODD.
It has the same like to use Win XP. You n t need any driver CD/DVD. The operating system should automatically recognise! -
HP Dv6 6011tx Radeon Windows 8 drivers switchable
Hello
I have the laptop DV6 6011tx, with 6770 M Mobile graphics card, it also have Intel HD graphics. Previously, I had windows 7 installed and I colud use Intel and AMD under win 7, but after installation of windows 8 and I cannot get my switchable feature enabled, please need help.
I installed the drivers from this link
http://Forum.NotebookReview.com/HP-drivers-software-Forum/556469-drivers-HP-DV6-4xxx-DV6-6xxx-dv7-5x...It seems that this laptop has not been certified for Windows 8.
Here is a link that shows what to expect during the upgrade to Windows 8.
That said, my steps listed here will give the best chance to get the switchable graphics to work.
The solution above works for some, but not all. It worked for me, so I hope it works for you.
Let me know what happens. -
Installation new ssd will void the warranty?
Hi, just the question:
Installation new ssd will present instead drive the warranty? Thank you
According to the Manual of Maintenance of disk hard is not a CRU (CRUS by), which indicates that the client is not allowed to exchange the item, hoever I'd probably as davidteyuwang suggests above.
Disclaimer clause; I do not work for Lenovo.
-
Without the Mac to the PC? No installation Kit and serial number more
Hello, I had the following problem:
My company uses the creative suite CS5, our art director left the company and we have no other use for the macbook. Now, we want to use adobe cs5 programs on a pc instead of a mac Windows. But we no longer have the installation kit and the serial number. Any Chance you can not help us to identify the serial number and tell me how to install the software on a windows pc?
Reference: can't seem to find my serial number, need help!
You Mac serial number does not work on windows.
Please see:
Exchange a product for a different version of the language or platform
I hope this helps.
Concerning
Megha Rawat
-
Compatibility of HD and SSD in HP Pavilion dv6 3290br hybrids
Is it possible install hybrid HD or SSD in HP Pavilion dv6 3290br? My idea is to change my HD for a which. Is this possible?
example in the link below, the Bay is standard, just use original support & plastic front plate for a perfect fit.
-
Is there any official page of HP where the latest official drivers of HP pavilion dv6-6011tx for windows 8/8.1 is listed?
Page pilot multimedia HP Pavilion dv6-6011tx laptop lists the drivers for windows 7 (32 and 64 bit), but I seriously need drivers for windows 8/8.1 to 6011tx. Help, please.
Hello:
Your model is not supported for W8/8.1 by HP.
You should be able to use all the W8 x 64 drivers and software for this model.
DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK
I don't know if the graphics drivers works on W8.1.
-
Trying to install Vista Automated Installation Kit but no configuration, click on?
Instructions in the download page to install the Automated Installation Kit Window Vista, pasted below. I spoke to the long step 4 OK, but there is no "Windows AIK Setup" to clikck on. I missed something? are there missing steps?
Thank you!!
1. click on the download button on this page to start the download
2. click on save or save this program to your computer. Windows AIK is distributed in the form of .img file.
3 burn the img recorded on a DVD
4. Insert the DVD into the machine
5. click on installation of Windows AIK to begin the installation.You must burn the IMG on a CD/DVD file using a program that can convert the IMG file in its native format of CD/DVD. Just burn the file IMG on a CD/DVD will not work. I recommend this:
-
Why Dell does not sell everything in those with SSD instead of a regular HD
Hello
Even when SSD is mentioned in the General introduction sheet, when you try to buy an all-in-one, work station, laptop... Never, I can choose an SSD instead of a normal hard drive.
I have a XPS12 laptop and it has a 128 Gb SSD af. An SSD gives a phenomenal speed boost, without noise, without vibrations, a fantastic user experience! The best improvement for years.
Dell, please modify your products and offer at least a small SSD!
Thanks in advance, Geert.
Hi Geert,
Thanks for that bring to our attention. I suggest you please voice your opinion here: storm of idea because we firmly believe the customer feedback plays an important role in the evaluation of our products and services. While I can't make any promises that each all-in-one system will be available with an internal SSD but right now we have 18 XPS which provides an option to configure with an mSATA SSD that works as a caching mechanism to improve faster boot process. You can check XPS 18 here: http://dell.to/13j1R5V
-
PowerEdge T630 'missing GPU installation kit.
Hello
We finally received the T630 P.EDGE server.
But during the ordering process, our Dell reseller forget GPU Kit installation, needed to power our Titan X GPU 3. (we already have 2 x 1600 watts PSU installed)
And I know this must be "factory-installed".
I contacted the service Dell cares Pro on twitter, and at first they said that the only solution is to buy spare parts of the GPU installation kit and try a 'solution' to the problem.
I found an interesting thread on the problems of Dell PEdge, on spicework.com and a user had the same problem, forget the GPU kit, sent back the server and received a new GPU installed Kit.
So what we can do to solve our problem?
1: open a ticket and we hope a positive response from Dell? (already done, we are waiting)
2: ordering spare parts and try to solve the problem ourselves?
I have to admit that 'Dell care PRO' finally responded quickly to our problem, but given that our company is located in Italy, we have to work with the 'Italian customer DELL Service of care '.
The Italian Dell dealer have no problem to repackage the server and sent to Dell.
But we tried about 10 times Friday to contact DELL customer service by phone at Milan, but we had no chance.
Sorry for my bad English.
And thank you all for reading.
Hello again
I have already answered this question on Twitter. Ask another medium will not change my answer:
https://Twitter.com/Matteo79056944/status/708564396172320768
MTT78I contacted the service Dell cares Pro on twitter, and at first they said that the only solution is to buy spare parts of the GPU installation kit and try a 'solution' to the problem.No, this is not what I said. I said that it would be better to work with the dealer to order the correct system.
MTT78The Italian Dell dealer have no problem to repackage the server and sent to Dell.
But we tried about 10 times Friday to contact DELL customer service by phone at Milan, but we had no chance.
Resellers cannot return the material for a refund, and we do not have any kind of return-to-depot updates our servers. The system will have to be refunded and rearranged to order the kit GPU.
Since you are likely to encounter problems, get a refund system ordered from a dealer that I have provided the numbers of pieces, you will need to get a GPU in the system. Perhaps this is your only option.
There are many ways that dealers sell systems to customers. Our resellers buy equipment directly from us and resell it to their customers. There are resellers that simply gathering quotes and have their customers to order the equipment directly. I do not consider any kind of sale apart from when a dealer us buys and resells for a purchase of reseller. Any other form of purchase is a service of consultation and not a resale.
If the dealer purchased from us and then resold to you then they will need to contact us regarding the return/refund. You shouldn't be contacting customer service for a refund in this scenario, because you don't give us money to repay. The return is between us and the dealer, and part of the dealer contract is that they are not allowed returns/refunds. If you paid us directly for the system, then you should be contacting customer service to request a return/refund.
Return and reorder the correct system are your best option. If this option is not available, you can try ordering part numbers, I have provided and install them yourself. GPU kits are not supported as an upgrade of the apres-point of sales, so it is not a kit or a process to perform the upgrade. The parts that I have provided are based on my search of the documentation available to me. There is also no guarantee that parts will be available for purchase.
Thank you
-
Hi, I have lost my installation kit otherwise, so how can I load on my mac book ps6, airlifts PS6 since I my PC Mac to my macbook, it is possible, because when I try to open it on my mac book it says: configuration error 16. and asks me to uninstall and re install
Hello Elif,
Please visit the given link to download Photoshop CS6: applications download Creative Suite 6
For the 16 error you can visit: https://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
It will be useful.
Concerning
Bianka Attre
-
The product name and number:
HP Pavilion dv6-3120us
OPERATING SYSTEM
Windows 7 Home Premium. 64 bit.
Error message
"Insert a disk; Insert a disk in drive E:. "
Background
Windows 7 system pre-installed on recognized computer CD/DVD ROM drive for about 3 months. Malware corrupted operating system. I reinstalled the OS disk from the recovery partition. CD/DVD ROM drive could not read or write, and I can not restore the old files or save the current configuration via the CD/DVD-ROM drive. All Windows 7 drivers, and hardware updates seem to be installed and up to date as of 04/10/2011.
Troubleshooting steps
1 attempted to play audio CDs. Same error message.
2 tried to read data CD-ROM. same error message.
3 tried to read DVD - ROM data. same error message.
4 Write DVD ROM has failed. Same error message.
5 re-loaded OS 2nd time. No change. Same error message.
6. checked with HP Support Assistant. DVD drive is recognized but not the media. No change.
7 checked Device Manager. DVD player is recognised as TS-L633R.
8. driver is cdrom.sys version 6.1.7600.16385. Clicked on Update Driver, no change.
9. I tried the uninstalling and reinstalling the driver. No change.
10 enabled BIOS. Processor AMD Turion II P540 Dual Core 2.4 Ghz. BIOS seems to be up-to-date, version F.27.
11 BIOS lists bootable CD/DVD-ROM drive. Reordered the first road and used Knoppix Linux boot boot disk, no change. Windows starts instead.
12 review of registry for "filter" and "lower filter" entries. Checked registry 4D36E965-E325-11CE-BFC1-08002BE10318. No upper or lower filters entries in current filter. No change.
13 Ran 'hardware and troubleshooting of devices. " It cannot detect the cd/dvd. No change.
The drive has power, WEAVES, is recognized by the BIOS and Windows 7. However, it does not read or write CD ROM or DVD ROM discs
I'm out of options. What to do to make the drive to cd/dvd rom read and write CDs?
Thanks for your help. Matt
Received a new DVD/CD ROM today S of Ben and Alan at HP today. The drive was manufactured in July 2011 and seems to have the same model number information. The old one was from December 2010.
Installation took about 10 minutes to the included instructions, and the player now plays all CD and DVD media. Thanks to the HP support for replacement of equipment warrantly quick fix.
-
Qosmio F - installation of recovery with portable CD/DVD player
Hello
I need help, I need to reformat my Qosmio using the recovery CD, but my problem is that my CD/DVD drive does not work. So I decided to buy the new portable CD/DVD player. When I try to reformat using the restore CD in the portable CD player that does not work.
I have an external hard drive, my plan is to transfer the hard disk then I'll use it to reformat my computer. is it possible and how can I do?
Can someone show me how to solve my problem?Thank you
rtmasagcaHey Buddy,
I think that the installation of recovery is not possible because it can be made of internal CD/DVD drive.
I put t know what laptop you have because you n t will display information but most of the computers laptops don't support booting from an external drive.Therefore, buy a new internal drive to install Windows recovery disk. Then it won't work.
Maybe you are looking for
-
iPhone does not recognize new number
Help please! I got a new number, a few weeks ago. I have sprint and I was able to get a new phone number. It works and everything when people call me, usually works, but not always when they text me (see below). My iphone 6 no is still not recognize
-
Question Vista - Windows XP to Vista basic upgrade?
Can I switch from Xp Pro to Vista basic?
-
If I run THAT MSE value automatic update do I still need to install updates for windows 7 security?
-
blue screen 0x000000D1 IRQL_NOT_LESS_OR_EQUAL
original title: blue screen of death before and after the installation restore new hd and use of records I am very frustrated. A few weeks ago my hp does not start and the test of the system said that my hard drive could not be detected. I just bou
-
Boot Configuration data file - knows how to solve the need advice that no one shared
Hello I just got the Recovery: Boot Configuration data file is missing fileh \bcd error code 0xc000000d To solve that I need to get the windows disc 8 to repair the laptop, the only problem is that I don't have the disc that I just moved away from ho