Installation of a micro SD, by a complete beginner

Hi, I installed never a micro Sd Card in my life.  I have a sansa Clip + 4 GB micro SD 8 GB of Sandisk card class 4.

First of all how he go in, writing or strips of metal upwards?

Secondly, I believe that I have to download a software, that there is a password and web address in the package.  What I need to first install the micro SD card, then connect to pc (Windows 7) and go to the site or is the software for the pc and the clip has no need to be connected.

Thirdly if I install audio books on the micro SD will be are they bookmark as they do in internal memory?

Sorry too sound so ignorant, but I'm a complete newbie to mp3 and micro SD

jenbes wrote:

Hi, I installed never a micro Sd Card in my life.  I have a sansa Clip + 4 GB micro SD 8 GB of Sandisk card class 4.

First of all how he go in, writing or strips of metal upwards?

jenbes wrote:

Secondly, I believe that I have to download a software, that there is a password and web address in the package.

No, there is no software required.

jenbes wrote:

Thirdly if I install audio books on the micro SD will be are they bookmark as they do in internal memory?

As long as they are properly marked (ID3 tags) and placed in the folder of Audio books on the map, as they must be in internal memory.

Tags: SanDisk Memory

Similar Questions

  • Installer of Windows Vista. -Error message: "another installation is already in progress. That completes before proceeding with this installation. »

    When I go to open Word or PP files I get a message "another installation is already in progress. That completes before proceeding with this installation. "There is no other facility. I can't install the Vista updates either. I suspect a problem with windows Installer.

    marcus1145944z,

    Please post with the information requested here:what to post in the Windows Update forum
    Start with these troubleshooting steps and post returns with the requested info and arises from the troubleshooting.

    Clean boot your PC, and then run Windows Update.

    Reset the Windows Update components

    Perform operations ofKB883825

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When you try to uninstall several programs via the Control Panel, I get a message that "another installation is in progress and must be completed first". I have no other current facilities. Windows XP Home Edition

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello dutchb,

    The error, "another installation is in progress and must be completed first" can be attributed to the InProgress key found in the registry at:
    HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS\CurrentVersion\Installer\InProgress

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    I suggest that first make a backup of the registry or a system restore point. Then go to control panel, administrative tools, Services. Do scroll down and find the Windows Installer service, and set the start at the stop State. Delete the registry key to the location above.

    Now, you shouldn't get the installation in the progress message when you try to uninstall programs.

    I hope this helps.

    Sincerely,

    Marilyn
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

    Hello HP assistants.

    I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

    Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

    As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

    Thanks in advance.

    Hello

    As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

    http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

    Kind regards

    DP - K

  • After the installation of Trend Micro Titanium Maximum Security 2011 Visual C++ runtime error

    I installed Trend Micro Titanium Maximum Security 2011. I restarted the laptop, there is an error message:

    "Visual C++ runtime error.

    The Application requested execution to terminate in an unusual way.

    Laptop would be hanging there & not procceed further. I had to restore to the already known good restore point. I've experienced & concluded that Trend Micro creates a problem.

    A fix for this problem?

    Vishal


    This can happen when a previous antivirus product was not completely removed. Use the cleaning of the previous antivirus tool.

    Contact Trend Micro Support here http://support.antivirus.co.uk/trendmicro/kbsearch1.jsp (you may need to change this for your country)

    Trend Micro forums may be able to help http://community.trendmicro.com/

  • CS5 installation failure exit code: 7 unable to complete the silent workflow

    "Exit code: 7 - could not complete the silent workflow" appear in the Installer log file. What should I do to fix

    ?

    In the Creative Suite 5 Design Standard Installation log, I found this error:

    Call to the custom action ROLLBACK encode the pre-installation for payload {D92BBB52-82FF-42ED-8A3C-4E062F944AB7} Microsoft_VC80_MFCLOC_x86

    Fri Jul 25 [1324] 12:50:19 WARN 2014

    I also ran CC cleaner.

  • The OSX 10.4 installation DVD can be installed on a completely wiped Mac?

    I have an iBook G3, with the type of disc loading slot. At present, it has an operating system installed. I found a DVD of 10.4 Installation on craigslist for very cheap, but I know that this type of disk requires that a previous installation of 10.3 be on the hard disk. I have no idea, and I don't want to buy the DVD to see that it does not work. Here is a picture of the disc:

    Can it be installed on a Mac without any version of Mac OS x on the hard drive, and if not, is there a workaround or modification that I can do to make it work?

    There is a part number on the DVD, so maybe it's a way to know if the DVD 'install' is or

    isn't wall installation or upgrade to OSX earlier. What is visible in the image, it does

    not seem to be an update for version 10.3 Panther. And a gray-label would indicate the disk

    was designed for use with a Mac specific build version only. So far, she poses as an installation DVD full.

    The iBook G3 (white and colors) do not comes with an optical drive to load per slot. Yours is a G4?

    From what I can tell by observing that the Tiger DVD install image you posted, it most of the

    not match a full installation DVD Tiger, that I still have in the official retail box.

    Mine says:

    Mac OS X Tiger includes 2 XCode

    Version 10.4 2Z691-5305-A

    If you have access to the actual DVD, try searching for the item by part number; If it is hidden

    in the picture you posted, so I can't say what I see enough search. And the numbers I do

    See are not among those listed in the database MacTracker which shows all OS X build versions.

    {Something on an installation of Tiger DVD, is the content of the disc is compatible with the capacity of a

    Media single layer; so if you need to, you could make a backup of emergency with the old style drive

    optical drive. {Later versions of OS X have more content and a double-layer disc would be required.}

    Should the cost for the DVD be really cheap and compose a full retail disk, which can be large.

    Install sites such as welovemacs and others who used to deal with the old system of out of stock

    media, sometimes, you can see what they ask if they have a few for sale again.

    This page includes pictures of the media the retail labels more old OS X install original disks:

    http://www.Macworld.com/article/2101301/advice-from-an-Apple-Tech-how-to-get-old - mac-os-x-install - discs.html

    {Even though I have a few original on DVD, the oldest media of retail OS X disks that I have is Jaguar or Puma;

    I have a tiger in the retail box & the image you show looks like an installation-in-all support Mac DVD.}

    Are you sure that your iBook is a white G3, or is this a G4? You say that it is an optical drive slot-loading;

    G3 models all had tray optical drives. I used to own a first white model dualUSB G3

    and no iBook G3 models use an optical drive "slot-loading". It was only the first iBook G4... And I have

    have a last G4 iBook model perfect condition, always close. It comes with 10.4 Tiger gray-label.

    Good luck & happy computing!

  • Pavilion 17-g192nr: error when restarting after the installation of Trend Micro

    I have a Pavilion new with Core i7 and SSD hard drive processor.  When I install Trend Micro and reboot the machine, it does not restart Windows.  Stops at a screen that says he can't restart windows and the only thing I can do is to set the machine to the point of most recent refresh has no installed trend.

    Please let me know how to solve this problem.

    I have 10 windows and Trend Micro works fine on my desktop Dell computer.

    Thank you.

    @P-Matt

    @WAWood is right: we cannot debug your security software.

    All things being equal - if you can't find something substantive, check / consider:

    Find your software Trend services > right click on the program / service > properties >

    If it is available for this program, set the update automatic "Delayed."

    In some cases, delay the start of the security software can give other essential Windows services a chance to start and "go" before security settings stomp on them.

    When you see a post that will help you,

    Who inspires you, gives a cool idea,

    Or you learn something new.

    Click the 'Thumbs Up' on this post.

    Fixed / responded? Click on accept as Solution to help others find answers.

  • CC will not be listed first installation after that first install would not complete the installation.

    Stopped first installation to 24%, I stopped the installation now first does not appear as an installation but CC said I installed it. I tried to uninstall the first cc and the control panel. All say, "Uninstallation was successful", yet control panel Uninstall programs listing show even the first as an application active and CC does not list the first for me to download. What now?

    Problem solved the representative of Adobe technical support had me download the cleaning tool. That solved the problem.

  • The installation Site e-mail accounts section is completely empty. Help :)

    I've just set up two sites Business Catalyst. On one of the sites I put in place, I added users and then set up emails. When I click on the tab e-mail accounts, it is completely empty. No option at all. Not even an error message. I did something wrong or is there a missing step.

    I thought that maybe it's just my brower, so I pulled it up in Firefox, Chrome and explore and it shows as empty on each of them. I also tried to connect by using a friends computer and email accounts page was still totally blank.

    Any help I could get would be appreciated.

    Thank you

    Hello

    This can occur if the e-mail record is not added correctly or is deleted.

    All records as www and non www version is not added or missing, then also you can deal with this problem.

    Please check this and if still a problem, give me the url of the site.

    Thank you

    Sanjit

  • Installation of the service pack is never completed, also any recovery points

    My computer is a Lenovo Thinkpad W500, running only the provider installed Windows Vista Ultimate Edition.

    I tried to install service pack 2 on 27 May. Since then, whenever I stop the system indicates that it initializes the updates. Then when I restart the system I get the message 'Install Service Pack 2 - step 3 of 3-0% ' displays for some time, is never greater than 0%. Then the login screen appears. This cycle occurs whenever I have stop Vista and restart.

    However, I can't tick rained updates, I thought, is underway. And I see no updates after May 27.

    I tried to restore the system (I am logged as an administrator), but I get an error to run the system restore. The error code is 0 x 80070057, without any other explanation. So I booted safe mode. Here I can get into the system restore, but only two restore points are available: June 22 and June 23. Both are regular restorations. There is no other restore point, so I can't go back to May 26.

    How can not to restore the hard drive to an older backup, I fix?

    Hi Lilfish,
     
    Thank you for writing to Microsoft Windows Vista Answers.
     
    As I see that you can not install some of the update of Windows Ultimate extras and it freezes. I also note that you tried to run the computer in safe mode without graphical mode, now antivirus protection and firewall services are disabled. Sfc/scannow says he cannot correct errors.
     
    Please let us know if you have defined the MSCONFIG back to normal startup? If it is not set to the Normal start, run MSCONFIG and set it to Normal startup and check if you are able to turn on services, Antivirus and firewall. You can also try running Sfc/scannow.
     
    As you can not install some updates on your computer, you can try the steps below and check if it works very well.
     
    1: Rename the Edb.log file
    Rename the Edb.log file, and then try to install the program again. To rename the Edb.log file, follow these steps:
    a. Click Start, type cmd in the search text box and right click on cmd.exe, and then click run as administrator .
    b. at the command prompt, type the following command and press ENTER:
    ren %systemroot%\system32\catroot2\Edb.log *.tst
     
    c. remove all tmp*.cat to the following folder:
    % systemroot%\system32\CatRoot\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}
     
    2: reregister DLL files that are associated with Cryptographic Services
    To register .dll files that are associated with Cryptographic Services, follow these steps:
    a. Click Start, type cmd in the search box and right-click on cmd.exe, and then click run as administrator .
    b. at the command prompt, type the following commands and press ENTER after each command:
    regsvr32 /u softpub.dll
    regsvr32 /u wintrust.dll
    regsvr32 /u initpki.dll
    regsvr32 /u dssenh.dll
    regsvr32 /u rsaenh.dll
    regsvr32 /u gpkcsp.dll
    regsvr32 /u sccbase.dll
    regsvr32 /u slbcsp.dll
    regsvr32 /u mssip32.dll
    regsvr32 /u cryptdlg.dll
    output
    Note Click OK if you are prompted.
     
    3: remove the attribute hidden %windir%\System32 and its subfolders
    a. Click Start, type cmd in the search box and right-click on cmd.exe, and then click run as administrator .
    b. at the command prompt, type the following commands, pressing ENTER after each line:
    Attrib-s-h %windir%\System32
    attrib s h %windir%\system32

    attrib s h %windir%\system32\catroot2
    output
     
    Restart the computer and check if it works.  Let us know the results.
     
    Kind regards
     
    Srinivas
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Start the system warning message: "one of the files containing the system's registry data had to be recovered after the installation of Trend Micro 2011 anti-virus software.

    Original title: registry warning message.

    This continues a question Nov 16 initially answered by SureshI and then merged by SyedV on November 26. I followed the steps all the recommended and the problem persists. Reminder, the warning does not appear in safe mode, but it does after the running File Checker, and it does after a clean boot. I don't know what you think it should tell me.

    In the event viewer I determined that 2 system errors are occurring at the time of the application in pop - up (i.e. the warning), one of them exactly at the same time. They had to do with services that have not started. I disabled these services, no effect on the appearance of the warning. Background on the application in pop information - up suggests that it may have to with a driver that is not available. I did a driver scan and see nothing that would cause the message.

    I noticed that two application errors also occur at startup, but these come about five minutes after the application pop up, so I guess they aren't relevant.

    Anything else I can do?

    Pevinco

    Problem is now solved. The point of the error of HP Cue device detection was the key. The deactivation of the service did not help, but uninstall ALL HP software that I could find (and HP's pushy!) and then reinstalling the popup eliminated printing software.

    Pevinco

  • AppleScript - help for a complete beginner

    I used one of the Applescript examples to create an email and it modified so that it fills the theAddress, theSubject and the first part of theBody automatically. Now, I wish I could add extra blocks / paragraphs of the text to theBody by using a dialog box in which I could take a number of blocks of text from 1 to 20 to say. I have these blocks of text in a TextEdit file and I guess that these blocks should be identified / name in some way, using AppleScript so that a list can be created and implemented in a dialog box.

    I have no programming experience and reflected on the AppleScript Language guide, but I am still unable to figure out how do it.

    Can someone help me with this?

    jashook wrote:

    I could take a number of blocks of text from 1 to 20 of say. I have these blocks of text in a TextEdit file and I guess that these blocks should be identified / name in some way, using AppleScript so that a list can be created and implemented in a dialog box.

    If you mark your blocks like this one (a label followed by a colon):

    Then code like below will you might see a list that looks like this (command-click for multiple selections):

    With this result:

    SG

    say application 'Finder '.

    the value f to (Choose file) as alias

    the value p to (read as 'class utf8 ' f) of paragraphs

    the value b to select from list p with prompt "choose 1 or more blocks:" with multiple selections allowed

    train is false then return

    end say

    myBlocks game to «»

    Repeat with I in BS elements

    value to the myBlocks myBlocks & (I like text)'s text ((offset of ': ' in (I like text)) + 2) thru - 1 & return

    end Repeat

    return myBlocks

  • Complete beginner can not browse

    Hello world

    I hope this is the right forum for this...

    I'm just starting to ramp on this technology. I installed VS 2010 (which is not taken care of here still) to work on a web page that will be viewed on a BlackBerry. So, the first thing I did was install the BlackBerry Simulator (since I don't even have access to a real) and try to navigate, but I could not. I searched a bit on the forums and suggested install of BlackBerry MDS Simulator. I installed, it ran and ran the BB Simulator and he would not yet hit the internet.

    So, here I stand, hat in hand, asking for help...

    : BlackBerry 9800 V.6.0.0.141 Simulator

    Simulator of MDS/Email: V. 4.1.2.17

    Windows XP

    When I try to go to google, I get the standard, 'unable to connect to the data Service Mobile selected... »

    On the management of the connections on the Simulator screen, it shows "Mobile network flight simulating...". "checked, WiFi is on and under the service status:

    Status: available

    Connection: Mobile network

    BB Internet service: Not connected

    BB Enterprise Server: Not connected

    Coverage: 3g

    Supplier: Flight simulated network

    -Wi Fi - all not connected

    Under the unit and state information, it shows the IP address: 0.0.0.0

    I hope I have provided enough information for someone to help me. Kind of hard to develop a web page if you can't even go to google...

    Thank you

    Carlo.

    SUCCESS!

    Apparently Installing JDK is not REALLY do a full install. I had to manually add the path to the bin directory to the PATH variable. Non-freak'n-credible!

    Now it's working.

    Sorry for all the posts...

    Carlo.

  • Complete beginner! How to cut and paste a logo of AI into a new document in illustrator?

    Hello

    I am very new to illustrator and trying to use it for work so my apologies if this question is inept. I have a file with 2 logos inside illustrator and I want to copy / paste them into a pdf file that I am trying to change. Can someone give me a guide step by step to fix this problem? It would be much appreciated.

    File > open the PDF file.

    File > open logo

    Select it with the Selection tool

    Edition > copy

    Change other document

    Edition > paste.

    You can take a look at the documentation.

    Illustrator help | Illustrator help

Maybe you are looking for