Installation of Acrobat Std CD (Newegg) DC [Win 7 Pro OS w / 8 GB ram], received a pop-up "this application cannot be installed on this operating system. The installation program will end now... "Do I have a faulty disk?
INSTALLATION IS COMPLETE; claiming the wrong OS. My computers a Win 7 Pro, w / 8 GB ram and searched 1 TB HD.
What Miss me?
Solution...
Copied all files in a folder on my machine & run 'install' from there.
Wish that the experts knew it!
Tags: Acrobat
Similar Questions
-
Bought Office Acrobat 11 DC Pro to my PC running Windows 7 - I have more than enough RAM and storage, but get the message: "this application cannot be installed on this operating system. The installation program will end now. Please refer to the minimum requirements to... "Can't determine the location on the Adobe Web site to get answers. Any suggestions?
I deleted an earlier version of Acrobat Pro from my computer. Still, I get the same message.
Hi John,.
Please specify if you have purchased DC Acrobat or Acrobat 11 or upgrade you to the latest patch for Acrobat 11, that is to say 11.0.11 so that we can help you accordingly.
I wonder if you have checked your system requirements before you download Acrobat.
I would also ask to share with you the screenshot of the error message with us.
You could probably uninstall Acrobat using cleaning tool. Here is the link for the same thing.
http://labs.Adobe.com/downloads/acrobatcleaner.html
If you were installing DC, check out the following link to download.
https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html (classic)
https://helpx.Adobe.com/Acrobat/KB/Acrobat-DC-downloads.html (continued)
Concerning
Sukrit diallo
-
I get this error when you try to uninstall Creative Sound Blaster Audigy 2 ZS. Uninstall stops around 60%, then the error message (see post title), then Setup ends.
I have now all sound and cannot take place.
I looked online and there were a few messages mentioning reg fixes of corruption that had solved the problem. Recently, I installed a couple of mounting aps, so I thought that this feeling a bit made of new video. So I downloaded ccleaner v 3.05.1409 CNET, done a reg scan and set ONLY the entries that had to do with Creative, rebooted, but I still get the error if I try to modify, repair, or uninstall the Creative suite. (I don't have ccleaner difficulty all other entries) So the clean reg did not no diff.
Now I can't install or uninstall.
I am running XP SP3 all updates. Other than the sound, my system works perfectly.
Help!
Thank you!
Mark
Hello
To resolve the above error message, follow the procedures below.
a. close all open windows and programs.
b. Click Start and then click Run. The Run dialog box is displayed.
(c) as shown in this illustration, type MSCONFIG and click OK.
d. the System Configuration utility appears. Click BOOT. INI, check the "/ SAFEBOOT" option, and then click OK.
e. When you are prompted to restart the computer. Click on restart.
f. the computer restarts in safe mode. (This may take several minutes, and its display will appear different from normal).
g. mode safe mode, click Start, Control Panel, then add/remove programs. Select the programs you wish to uninstall, for example, Sound Blaster Audigy 2. Must uninstall successfully without error "the installer cannot invoke any of the subscribers.
h. once the uninstall is complete, close the control panel and open windows explore.
i. in Windows Explorer, click on TOOLS, then Folder Options. In Folder Options, click the view tab and choose the option view the hidden files and folders, under Advanced Options. Also, uncheck Hide extensions of the file types that you want to know. Click on apply, then OK.
j. in Windows Explorer, navigate to the folder C:\Program Creative , while C: is the drive where the software is installed and remove subfolders associated with the software you are trying to uninstall. If you have a single creative hardware, you can remove the creative brief.
j. in Windows Explorer, look for C:\Program InstallShield Installation Information------folder. In this folder, you will see strange named directories that contain information about the installation of the application and the material / uninstall information.
To find which directories contain information on Creative products. Open a directory at a time and watch the installation. INI file. This file should open in Notepad.
In the file, locate the AppName =, for example, the AppName =Creative MediaSource. If the installation program. INI contains information on the creative product you are trying to remove, remove the directory as the Setup program. INI has been found. Continue to go through all the directories and remove the most creative in the InstallShield Installation informationfolder n.
k. after the creation of directories are deleted. Restart the computer in Normal mode. To do this, repeat steps 1 to 5, but in step 4, uncheck "/ SAFEBOOT"
a. restart the computer and reinstall the application.
Refer to this article for help:
http://support.creative.com/kb/showarticle.aspx?url=http://Ask.Creative.com:80/SRVS/cgi-bin/WEBCGI.exe/,/?St=425,E=0000000001318352054,K=3345,SXI=5,Answer51608=obj(51608):obj(51637) -
I want to use InDesign, but for this month only! so if I pay for the "monthly plan" means that I pay for this month then the plan InDesign will end?
Hello
Please go through the Adobe - General conditions of subscription as well.
Alternatively, you can contact customer service
Hope that helps!
Kind regards
Sheena
-
When you try to install Adobe Standard XI, he says: "Setup has detected that you already have a more functional product installed. Steup will stop now. "I have a trial Pro installed but do not sow the feature so much so I bought the standard.
Uninstall versions acrobat and reader, if you have a win os clean (Download Adobe Reader and Acrobat tool - Adobe Labs), and then install acrobat std.
-
I have a hp Pavilion working with XP but recently I installed Windows Office 2007. Since then, I have problems with the sound system. I got a message saying that the Generic Host Process for Win32 Services has had a problem and will end. Then I have no more sound. I can't open the volume control as the system says that nothing is installed. I always need to restart my computer to get the sound working again. Help!
Thank you, Jerry. I'll try it, but for now it works well. I fit it and it seems to have done the trick.
See you soon,.
Karine -
Is time Machine always being backed up to the folder My Documents/Desktop now that they have been sucked into the iCloud?
Yes. The files are still on the computer so that they will always be saved by Time Machine.
-
I have Windows XP Professional Version 2002, service Pack 2. I have this operating system in English only. Now, I would like to add Arabic language. How can I do?
Hello
You want to change the display language on the system or the keyboard layout?
Method 1:
Language packshttp://Windows.Microsoft.com/en-us/Windows/language-packs#lptabs=XP
Method 2:
a.Click Start and then click Control Panel.
b. double-click regional and Language Options.
c the languages tab, click details, and then click Add.
d.Under an input language, add the language that you want to use.
e.Under configuration keyboard/IME, click the keyboard layout you want, and then click OK.
List of languages supported in Windows 2000, Windows XP and Windows Server 2003
Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.
-
I welcomed CC updated XI Acrobat Acrobat DC. I bought DC Acrobat but serial number does not work with the version installed by creative cloud. And when I uninstall this version, downloaded Acrobat DC installation generates an error indicating that the application cannot be installed on this operating system. I lost my money by buying the download?
Previously titled:
How to install a downloaded version of Acrobat DC purchased with a serial number allocated, when I get a Setup error, saying: it cannot be installed on this operating system? Creating cloud had already updated Acrobat XI in DC, but will not work with the new S-N
Allan, please see: download Acrobat products | Standard, Pro | DC, XI, X. Please check the system requirements for | Adobe Acrobat Pro DC, Adobe Acrobat Standard DC
-
I installed my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it's because I'm trying to reinstall it in a short period of time
See link below and check:
-
Have a Dell system, caught a virus and it has really messed up the PC. Recently, it got worse so I tried to reinstall the operating system with the Dell disks. It wouldn't work. So I bought for Windows 7 Professional, it will not be installed. My first question when installing a new operating system isn't automatically wipe the hard disk, create a new partition, and then install the operating system? Because this does the same as the Dell disks, is to take what is on the hard drive and put it in a folder called windows old, is not formatting the HD. When I boot the disk, it shows the installation of files then open windows and start the installation. Before he could finish I get an error missing or corrupted files. Tried several times now, windows will still not open. Any suggestions? Once while trying to install the pc crashed with a blue screen which is one of the reasons why I have reinstall the OS, he started to plant a few times. I don't remember all the details on my PC, but its 4 years, triple core coprocessors, ram 8 GB, 500 GB HD. At the same time just after all this started in Jan. I had also improved my 3 GB to 8 GB memory. I bought the Dell memory for my system. Since the crash, could there be a problem with these new memory chips? Last night I tried to disassemble each and reinstalling it, but that doesn't seem to make a difference. Before I tried to reinstall the operating system, the pc was see the concert 8.
Original title: used to install Windows 7
Disconnect any other (additional) internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
Note: Reliability of the drive hard has come the way down over the last 24 months and improved a bit lately according to manufacturing.Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors.
SeaTools for information: http://www.seagate.com/support/downloads/seatools/
SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
SeaTools for DOS download:
http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htmHitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilitiesNotice of Fujitsu drive management utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnosticAlso check Home Edition free Partition Wizard option "Test of disc surface":
http://www.partitionwizard.com/free-partition-manager.htmlJ W Stuart: http://www.pagestart.com
-
I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."
Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?
You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.
In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard
-
Hello-
I'm looking for here (or get) help directed to the right forum regarding an error message I got when trying to open a PDF file. The error message indicates "this file does not have a program associated with it for performing this action. Please install a program or, if such is already installed, create an association in the default programs control panel. "To be quite honest, I don't have the slightest idea as to what to do with respect to this message and I need some advice ASAP. I have the latest Adobe Acrobat Reader installed and if I have to contact them instead about my problem, please let me know.
LeeBee
Hi Leroy,
I would like to know some information about the problem so that we can help you better.
The question is specific to the PDF files?
Thank you for details on the issue.
I also know that the inconvenience that you are experiencing because of the problem mentioned. I will definitely help you.
This problem may occur if the exact program is not associated with the file you are trying to open.
I suggest you to set default programs and associate a file type with a program properly.
Please see this link:
Change programs that Windows 7 uses by default
https://support.Microsoft.com/en-us/help/18539/Windows-7-change-default-programsI hope this information helps.
Please let us know if you need more help.
Thank you
-
I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.
I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.
Need additional details as
Is it a laptop or a pc?
Have you coveted your dynamic disk basic disk?
What the structure of partition on your computer?recover with these details...
-
Yesterday, I installed Photoshop CC (2014) through the creative cloud app. Now, when in Lightroom when I go to "Edit in" and select Photoshop CC (2014) and click on "edit copy with Lightroom adjustments", it opens Photoshop CC (2014) but my picture does not appear? My picture is displayed when I click on "copy edit" or "edit original".
How can I fix this so that I can open a photo in Lightroom WITH Lightroom adjustments? Thank you!
My problem has been resolved by Adobe engineers. It seems that automatic resettlement carried out by sets of upgrade to win 10 everything to "run as Administrator". The simple solution, they told me was to disable this limitation and now everything works as it should.
Maybe you are looking for
-
I have an old iPod Touch 4.2.1 (later it can be run) running. I've stripped of everything except the default, erased all the calendar events, put it in airport mode, but it will jump to the top of event notifications. I use this in my Studio as just
-
Satellite A100-447 does not accept the 1 GB of flash memory or a memory stick?
I've had my laptop since March and have used a compact flash 128 or 256 MB via adapter without any problem.However, I have now bought a 1 GB (for my Eos 300 d) but my laptop says cannot find software? I then bought a memory stick USB 2.0 1 GB, but my
-
ZV5000 - want to get the BIOS update but do not have Windows
Hello just got my trusty zv5000 AMD out of the closet and intend to play with Linux on it. At the moment there no bone because the HD has not, although I noticed that the BIOS is a former F.21 and would get to you last F.35. Unfortunately, it see
-
How can I prevent my firewall off?
Often when I turn on my IBM T43 laptop, I get a bubble that says that Windows Firewall is turned off. I click on the bubble, and then follow the steps to turn on the firewall. I am running Trend Micro Titanium Internet Security 2012 version 5.2.1035
-
miniature girls vidio will no longer display vidio
girls vidio thumnails appear more vidio image