Installation of AutoCad LDT on Wondows 7 problem

Similar Questions

• Installation of AutoCAD 2009 on Windows 7.

  Hello

  I need to install AutoCad 2009 on Windows 7 Home Premium, which I am unable to do. Can I get a solution as soon as POSSIBLE for the same?

  I also read in the forums that if I switch to Windows 7 Professional, I would be able to run the installation of AutoCAD in XP compatible mode. Kindly update me on the same.

  I use Asus K61IC notebook PC series and would also support the upgrade.

  Kind regards

  Jaisalil Shilewant

  Vruttaunsh Infra Pvt. Ltd.

  _____________

  This is a public forum. Please do not post personal information, including phone numbers. Thank you!

  Hello
   
  
  a. you get an error message during the installation of this software on Windows 7?
  
  1. both 32-bit and 64-bit versions of AutoCAD® and AutoCAD LT® 2010 2010 are compatible with and supported on Microsoft Windows® 7 However Autocad 2009 is not tested on Windows 7 platform according to the information available on the Autodesk site:
  Microsoft Windows 7 and Windows Vista compatibility
  http://USA.Autodesk.com/ADSK/servlet/index?ID=10676692&siteid=123112
   
  2 its been noted that if the computer supports hardware virtualization sometimes xp mode works on home premium as well so its worth a try before the upgrade to Windows 7 Professional.
  Here are a few links that explains about Windows XP mode in Windows 7. We recommend that you download and install Windows XP mode on your Windows 7 computer.
   
  Windows Virtual PC
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx
   
  Install and use Windows XP Mode in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7
   
  Using Windows XP Mode
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-XP-mode
   
  ASUS & Support Services
  http://USA.Autodesk.com/ADSK/servlet/item?ID=14949567&siteid=123112
  3 regarding the upgrade is concern, please refer to the article below:
  Upgrade to another edition of Windows 7 by using Windows Anytime Upgrade
  http://Windows.Microsoft.com/en-us/Windows7/upgrade-to-another-edition-of-Windows-7-by-using-Windows-Anytime-Upgrade
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Separated from this thread.

  My phone displays an error message on the startup file and it mentions the installation media, how can I solve this problem?

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  There are several methods to reinstall Vista.

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  And here are instructions on how to burn ISO disk images:

  http://www.SnapFiles.com/get/isorecorder.html

  The download links and information on how to make the ISO file, and then create the Setup DVD above are at this link:

  "How to download a Vista ISO and create a Setup DVD or USB"

  http://www.Vistax64.com/tutorials/301852-Vista-ISO-download-create-installation-DVD-USB.html

  "How to create a USB of Vista Installation key '

  http://www.Vistax64.com/tutorials/181538-USB-bootable-Vista-installation-Flash-thumb-drive.html

  ___________________________________

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  ___________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Them or us ask the right sequence of key.

  ___________________________________

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I have an error message of "there is no browseui.dll. Installation of the file may correct the problem. »

  I have an error message of "there is no browseui.dll. Installation of the file may correct the problem. "I have no office and nothing showing where would the office.  Help, please! I ran a spyware/malware pogrom, but no help.  I tried the "command Prompt" and %windir%\system32 using the cd but did not work.  I also used a DLL problem progrm difficulty but no help.  I'm running Vista SP2 and have no taskbar, no start menu and nothing shows up on the desktop.  I can get on the internet, but in a roundabout way.  I tried several solution on the Microsoft web site, but no help. I did a restore but no help.  I don't want to lose all my photos and documents HTML if possible.

  Hello
  Thanks for your reply but I had tried the System File Checker with no luck.  Finally, I replaced the hard drive, because after several attempts, I reached a point where I had the format of hard drive, but the main area where all my data were not could be formatted. I think a virus may have lock me up.
  To date, May 22, 2012 the system works with the new hard drive.

  Thanks to everyone who gave suggestions.

• Installation of AutoCad 2005

  I have AutoCad Lite 2005, how do I run on Windows 7

  Insert the disc of AutoCAD LT

  Click Start

  Computer

  Open the AutoCAD LT drive

  Right-click on the Setup file

  Click on the compatibility problems

  Wait until the problem is detected

  Click on troubleshoot program

  Select Windows XP SP3

  Click Next, launch the installation of the program.

  Return to the wizard, click Next, save the settings.

  When the AutoCAD installation is complete, click Start

  All programs

  AutoCAD

  Right click on the AutoCAD file

  Click on properties

  Compatibility tab

  in Compatibility Mode, check the run in compatibility mode for: box

  Click in the list box

  Select Windows XP SP3.

  Apply > OK

  Start the program.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Installation of the new version of Skype problem

  Hello

  I had this problem for a few months. Currently, I installed the latest version of Skype (6.14.0.104), but it doesn't install properly on my machine. I tried to uninstall and then install the Skype several times but no luck. When I enter my credentials of Skype on the screen that appears after installation, nothing happens it won't let me sign. I have attached the screen that appears after installation, there are no images.

  I couldn't find the solution to this problem and I really need to sign in to my account. Please help me solve this problem

  

  What you see is due to non-standard settings for the .css class in your Windows registry. You can solve this problem with a few simple steps:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-issue/m-p/2126425#M204784

• Correction of installation Photosmart Wireless with SSID of SigmaplusEOL1 problem

  Hey,.

  I have a Photosmart C4780. I have set up for a little wireless printing back and it worked fine. Recently, I had to reset my router for other reasons, which forced me to set up my printer wireless again.  But I can't too. First of all, I used the Setup Assistant that has been installed on the iMac when I previously installed it.  That did not work.  Then, I just uninstalled and tried to reinstall it back. I tried to implement wireless first. When defective, I tried to set up via USB, and then wireless, which still did not work. The problem I meet is during installation in the Setup Wizard, I get 'Select unit.' My printer is connected via USB, and it appears on the list of devices. I click on "Continue" and the following window is an option that says "Set up your device for a wireless network." I check the box and click "continue." The next window is 'Select Network'. And here the problem comes in. A message appears that says "Device not connected", even if it is clearly. I even tried not to connect the printer via USB until it says "Select Device." But I get the same result. Also, when I click 'OK' to the message, window "Select network" not said no "Wi - Fi network discovered."  I can't do anything on this subject. I tried to reset the settings of the printer, and the printer for 15 seconds unpluggin wireless to reset the printer as a whole. Still having the same problem.  Any help would be greatly appreciated. Thank you in advance.

  Printer: HP Photosmart C4780 computer: iMac late 2009 OS: OS X Lion mountain 10.8.2 router: Netgear WGR614v7

  I finally thought to it! (Sorry I'm answering my own posts btw, but I want to put the solution for someone else with the problem of SigmaplusEOL1). If you have the SigmaplusEOL1 as your SSID when you print the "wireless network Test report", you have NO need to come back (I know it's a hassle for people).  To resolve this issue, follow these steps.

  (1) disconnect your printer.

  2) go to your router's IP address (such as 192.168.1.1 or whatever it is for your router).

  (3) replace the SSID of your wireless network with "SigmaplusEOL1".

  (4) for the security option for your wireless network select None (of the sort that a password is not required to access your wireless network).

  (5) Please turn your printer back and reprint "The wireless network Test report". It should say «No problem found...» »

  (6) the report shall also give an IP address of the printer (under Configuration Summary below). Type this address into your browser to go to the printer setup page.

  7) click on the 'Network' tab at the top.

  (8) under the heading "Connections" in the left pane, click "Wireless (802.11).

  9) click on "Start the Assistant" at the bottom right.

  (10) in the wizard, edit (the SSID and encryption wep or wpsk) password that you want your network to be wireless. So probably everything what he started as before you changed the SSID to SigmaplusEOL1

  11) click on 'Finish' at the end. The page will probably try to keep loading but it won't because you have changed the network settings on the printer. Just ignore that

  (12) back to the IP address of your router and change the SSID and the encryption password for everything what you change printer SSID and password.

  (13) reprint of the wireless network Test report. Admittedly, the SSID is the same as your wireless network, and everything is good.

  That's all. You should be good to go now.

• Installation of Satellite P200-144 recovery disk problem

  Model Satellite P200-144 PSPBGE

  Hi all

  Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

  Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

  My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
  Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

  In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

  Try to rename all the letters of potential left to HDD0
  Try to rename all the letters of potential left on HDD1

  Microsoft DiskPart version 6.0.6000

  Copyright (C) 1997-2007 Microsoft Corporation.

  On computer: MINWINPC

  Disk 0 is now the selected disk

  DiskPart succeeded in erasing the disc

  DiskPart succeeded in creating the specified partition

  Partition 1 is now the selected partition

  DiskPart successfully assigned the letter of the drive on the mountpoint.

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart succeeded in creating the specified partition

  Partition 2 is now the selected partition

  DiskPart successfully assigned the drive letter or mount point

  100 percent complete

  DiskPart successfully formatted ther volume

  DiskPart marked the current partition as active.

  Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
  RECO-info-imagecount value = 2
  define the RECO-info-partnumber = 1
  RECO-info-numsplit value = 5
  RECO-info-bootindex value = 0

  L ' ImageX for Windows tool

  Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

  Progress: 67% 06:44 minutes

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  [WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
  [compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

  [ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

  Error image restoration.

  The file or directory is corrupted and unreadable.

  Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

  Is there a reverse this problem?
  My thoughs is that the image is corrupt.

  The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

  Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

  If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

  0844 847 8944

• Portege R100 - question about the installation of the USB port and Windows problems

  Hello

  I just bought a used Portege R100, but I have some problems. Of course the laptop isn't a CD or DVD, player so I tried an external DVD drive, but it did not work. What kind of device I have to install Windows (not an edition of recovery or anything like that, but a whole new windows on the formatted HARD drive)?

  I also have another problem: whenever I plug a USB device (I tried the DVD drive external and a USB keyboard) when I start the laptop, it seems to hang. At least, I am not able to type anything more; the keyboard of the laptop is dead (the point where the entrance would still be flashing in the BACK platform, but typing. sth on the keyboard isn't doing anything). It is not normal, is it?

  I also tried to get to the BIOS, but I tried various commands (F1 to F12, DEL etc.), but I couldn't access the BIOS. It would be great if someone could tell me the command for it.

  Thanks in advance for the help and sorry for the bad English, I'm not a native speaker :)

  The forum has a search function, but to help you look still these 2 wires:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=23921

  Here you can see that XP installation isn't very easy, but can be done successfully

  as long as you are working in an environment with appropriate back-drivers back, you can use any kind of external (USB or pcmcia) CD player you want

  the bios is accessible by pressing ESC and the Start button

• New installation of XP on Y550 - card reader problem

  I pulled the hard drive a Y550 and put in a new drive. Install XP on CD. Went well.

  Tried to update a driver with one of the drivers downloaded from Lenovo.

  "Not enough place to expand on C:" it turns out that XP is recognizing the card reader, assigning "C:" and assign the hard drive "E:" I tried reassigning 'C:' disk hard by following the instructions on the web site of Ms. This has messed up the license key and the system does not start. Check the BIOS to disable the card reader, but didn't see any option to do so.

  I need XP on this system and the hard drive must be "C:" I guess I could implement a system dual boot, installation of XP on the drive to Win 7, but I'd rather not.

  Anyone have any ideas?

  Solved the problem by disabling USB in the BIOS then reinstalling XP. Everything now works even if I had to install the version of Win7 a few things in order to make them work. I can not configure Desktop Navigator (version of Win7, XP version does not) but at least it starts is and that's good enough for now.

• Installation software for HP Officejet 6700 Premium problems

  I have a Compaq laptop originally with Windows Vista Home
  High-end operating system. I have recently installed Windows 8.1 and
  had some minor problems with the programs, but they have been sorted
  outside.
  I tried to reinstall the HP Officejet 6700 Premium software,
  Download the software OJ6700_1315.exe of your drivers and
  Software Web site.

  When I run the software I get the following error
  Message:

  Setup error

  Call to DriverPackageInstall returned error 5 package ' C:
  \Program Files\HP\HP Officejet 6700\DriverStore\Pipeline
  \hpvpl09.inf': a caller of DriverPackageInstall must be a
  Member of the Administrators group to install a driver package.

  As I'm logged in as an administrator, I tried right click
  on the software downloaded OJ6700_1315.exe and execution of the
  software as an administrator. I still got the same error
  Message. I thought it would be because of network problems and
  joined the network (the other computer running Winows 7).
  But always without success. I tried to remove the HP folder of
  Program Files and then run the program as an administrator
  but still got the same error message.

  Any advice on how to get accepted as a member of the
  Group directors would be appreciated, or in another way
  to deal with this problem

  Good FrazerA,

  I'm happy that we did the SFC/scannow. The question is are known is the operating system, not the HP software. At this point, my suggestion is to perform a system recovery to Windows Vista. A system recovery will bring the computer to a new similar State, for this purpose, you will need to back up all your personal data and files.

  If you want to continue, click on the following link and follow the instructions. > Undertook a restoration of HP (Windows 8) system

  After system recovery is complete, use the HP Support Assistant to ensure that the computer is up to date. Support Assistant will check for all updates to Windows and HP. If not already have the Support Assistant installed, click here to download and install it. > HP Support Assistant.

  The best course of action at this time would be to install the HP on Vista software to see if it installs now. Of course, a successful installation confirms the theory that the operating system itself is the root cause of the problem at this point.

  Post back with the results and product number. With the Compaq product number I can check the specifications, make sure that the BIOS updated and you ensure that we have a smoother installation of Windows 8.

• Installation of the Dell AIO 926 printer problems

  I have a Dell 530 s computer Vista Home Premium and a Dell AIO 926 printer.  For some time now, I had a problem after printing 3 or 4 times that I wll get a message that the printer Interface was lost or something similar.

  I uninstalled the printer and have installed many times online and on the driver CD.  The printer installs and I can print.  However, for Fax or Scan, I have to go the the program and open it.  When I go to programs, Dell printers, Dell Photo Printer AIO926 the only thing it is the uninstaller.

  I really need to be able to scan.

  Help ~!

  In case anyone else has this problem; I had to turn off my Norton Firewall and it works ~!

  Hi joelash1,

  As you have already reduced to Norton firewall causing the problem.

  It is possible that an exception should be created in Norton firewall to resolve the problem.

  I suggest that first update you the Norton firewall and check if it works.

  If that does not solve the problem, then you will need to contact Symantec for more information about adding exceptions in the Norton firewall.

  http://us.Norton.com/support/index.jsp

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• installation of upgrade to itunes says error: problem with the Windows Installer Package

  Hi, I'm unable to load the latest version of itunes, the error message says that there is a problem with the installation of window and the staff package to contact technical support or the vendor of the package. Can offer you any advice? Thank you

  Download, install and run the Windows Installer Cleanup utility: http://www.softpedia.com/progDownload/Windows-Installer-CleanUp-Utility-Download-18442.html and see if that helps.

  If not, please check iTunes for technical assistance to the: http://www.apple.com/support/itunes/ or repost in iTunes Forum at:http://discussions.apple.com/category.jspa?categoryID=149.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Installation/uninstallation program has stopped working.__A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
  I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
  So I appreciate any help you can offer.

  Hi luv2shop,.

  This problem may occur because of the conflict by the present security software on the computer.

  I suggest you try the following steps:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Step 3: Set the clean boot computer and try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 
  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can check with iolo for known problems

  http://www.iolo.com/customercare/

  Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Suspended at the end of the installation of Vista (pre SP1) - Sata drive problem - how do we install?

  Hi, my Dell Studio Hybrid desktop is hang on installation (new installation on a formatted hard drive) from Vista to the installation step ends.  After much research it seems that it is a matter of pre Vista SP1 associated with SATA drive/drivers.  Installation crashes because the computer is looking for a driver on the CD-ROM that is not there.  Anyway I don't see a driver relavent in the cross-section of the hybrid (another computer have drivers under the SATA drives) and if I did I don't know when to add it (load the section of the driver during the installation process?).  Any help on this topic and how to proceed with the installation of vista would be much appreciated since I just lost my weekend to this.

  Hello

  You are right that there is no drivers sata on your computer because you don't have that one hard drive go in the bios as described here .and put AHCI to IDE

  Integrated Peripherals

  Allows you to enable or disable these integrated devices: HD Audio, Onboard LAN connector, Onboard LAN Boot ROMand side logo. Serial ATA Configuration can be set in IDE or AHCI mode.

  then install your version of windows you should have no problem now.

  Good luck