Installation of ColdFusion on Linux VMWare session

Has anyone had a successful installation of coldfusion mx7.0.1 meeting of vmware linux? I found a problem on this site for coldfusion installed in a vmware windows session. I tried the work around by using a silent installation and still had installation problems.
( http://www.macromedia.com/cfusion/knowledgebase/index.cfm?event=view & id = KC.f7447c40 & extid = f7447c40 & dialogid = 117420173 & iterationID = 1 & sessionID = 4830838986d87c681272, & stateID = 1 + 0 + 11739 4817 & mode = advanced)

(do a find for VMWARE)

I know C++ compatibility issues, and I know that I have additional libraries installed. (I don't think that is the question for this installation, in any case)

I get the error listed in the Setup log file indicating:
'/tmp/0124.tmp/ant_bin_dir.zip '.
Status: ERROR
Additional notes: ERROR - problems wit the Extender of the type Z_/installers/CustomCode/includes/ant_bin_dir.zip's. "He said: error in opening zip file.

I zip and unzip in the path and callable. There are a lot more error thereafter, but I think it's because files are missing in zip archive. Any ideas?

Oh, I also tried to download this file 3 different times. I had an original installation file that I used before without any problem. I also downloaded it twice just to make sure I didn't have a corrupted file.

(Edit)

I made the request to record the temp directory, so I could see what he was working with. I went through the decompression of the files I could find and found that Resource1.zip has problems.

"Signature of end-possibili-directory not found. This file is not a zip file, or it is a drive from one archive in several part. In the latter case you Central Directory zipfile comment is on the last drive of this archive.
unzip: cannot find zipfile directory in one of the Resource1.zip or Resource1.zip.zip and cannot find Resource1.zip.zip, period. »

Maybe its a problem with this file in the installer?

OK, I played around with it some more but I thought that I have here documents for later use, if someone has the same problem.

I downloaded many times coldfusion linux installation.

I'll implement this laptop so I can program so that not even connected to the network. I bought a copy of CF7 earlier and downloaded the file.

I think that the download of "Developer" from the download section of adobe (macromedia) may be bad. That, or by downloading it 4 times on this computer all failed in the process.

I remembered that I still had the coldfusion linux install file on my Web server, so I downloaded the file to my session for laptop computer to vmware using sftp.

I should also mention that the md5 sums did NOT match those shown in the download section. In fact, I couldn't get one to match at all. I don't have a sum on the first two downloads, so I don't know if they match or not.

Anyway, I knew that the cold fusion on my web server setup file worked, so I copied that and ran the installation using the installation in silent mode. I don't know if it would work with the installation in normal or not; I have not tried.

So, if you encounter this error, it's probably the download. Try to download the test the other section (can't remember what his name). You can install either of those in developer mode.

Tags: ColdFusion

Similar Questions

  • Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

    Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

    Let me know if you need more info... in fact I have a setting error while installation said

    -(/ etc/hosts has no correct entry for the host name)

    Host: 192.168.85.100

    Win7 ip: 192.168.1.x

    Thank you...

    (host computer)

    Win7 64 bit

    (vmware)

    Oracle Linux Server 6.3 version

    Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

    Oracle Linux Server 6.3 version

    -(/ etc/hosts has no correct entry for the host name)

    Then post your/etc/hosts.

    Host: 192.168.85.100

    Win7 ip: 192.168.1.x

    Why 85? have you tried 192.168.1.100?

  • EBS R12 (12.2.4) installation on 64-bit Linux 7

    Hi all

    I want to install EBS R12 (12.2.4) installation on 64-bit Linux 7. Is this possible or not?

    I just need to know the possibility because LInux 7 is a new, and I just want to install it on my laptop to test the object.

    Please guide me.

    Thank you.

    7 Linux has recently been approved for 12.2 - https://blogs.oracle.com/stevenChan/entry/ebs_12_2_certified_on

  • Minimize the VMware session at MAC 4.1 Fusion bar

    Hi all

    in the earlier version of the Fusion, I was able to reduce to a minimum the VMware session by the toolbar, buttons red, yellow and green MAC was present, then the session when in MAC VMware icon. Now I can only get one suspends the button in the toolbar 4.1, the red, yellow or green button is not present.

    Can someone guide me how to minimize the session without clicking the button on the unit, then to reduce it, please?

    / Jesper

    If you are running on lion, it's easy. You can swipe between your main desktop app full screen by gesture swipe on the trackpad or magic mouse or control + left/right arrow on the keyboard.

    If you always use SL, I think you can exit full screen first and then reduce it. A bit fussy, but I think it's fast.

  • Error on the 100 + entered form after installation of ColdFusion Security Hotfix APSB12-06

    I recently installed ColdFusion Security Hotfix APSB12-06 (http://helpx.adobe.com/coldfusion/kb/coldfusion-security-hotfix.html).

    After installation, the shapes that have more than 100 entries produce a 500 - internal server error.

    I just noticed this note in the instructions for the fix:

    • Customers who want to change the postParameterLimit, go to the {ColdFusion-Home} / lib for Server installation or {ColdFusion-home} / WEB-INF/cfusion/lib multiserver or J2EE installation. Open the neo - runtime.xml file, after the line
    1

    "100.0"

    Add the below line and you can change the desired number 100.

    1

    "100.0"

    I'll try that

  • installation of coldfusion on tomcat 5.5

    Hello
    I'm doing a project involving coldfusion and j2ee (what a good idea, btw?), and I met some problems on installation of coldfusion.

    I installed apache (tested and works well with a j2ee project), jdk 1.5.0.6 - tested with a few projects and works very well and a plugin for eclipse (cfeclipse I think)
    then I installed "coldfusion-702 - win.exe" (downloaded from macromedia, developer version - it says it is supposed to work with j2ee).

    the installer has 2 directories: CFusionMX7 and ColdFusionSearchService. in the first, there are "cfusion.war" file that I copied in the directory webapps of tomcat (as well as the "CFIDE.war" file).

    then I started the apache server and it created (;)) apart a couple of directories in the webapps directory: CFIDE and cfusion (which contain more files and subdirectories))

    Next, I created the file "setenv.bat", by following the instructions on this site (which contains the paths to the directories in coldfusion, access roads written here all corect) and place in the directory 'bin' of tomcat (next to the file "tomcat5.exe"). restarted the server, etc etc.
    (set JAVA_HOME = C:\Program Files\Java\jdk1.5.0_06\
    Set CF_HOME = C:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\cfusion\
    put CF_WEB_INF=%CF_HOME%/WEB-INF) etc...

    My question is: what should I do next to make it work? :)

    I started tomcat and I tried typing " http://127.0.0.1:8080/cfusion/CFIDE/administrator / ", but I get the "Cannot display page" error
    Help.

    Nevermind, I got it.
    the tutorial on the macromedia site is outdated. This is were you can find correct information:
    http://www.librarywebchic.NET/WordPress/2005/11/18/Tomcat-and-ColdFusion/

  • Installation on Red Hat Linux 7.2 vmware tools

    I am in Workstation 8 and I'm having some trouble to the VMware tools to install.

    This problem occurs when you run vmware-config - tools.pl. He can not find the GCC binary. I provide the path/usr/bin, but it returns an error saying that is is not a valid path.

    A similar problem occurs with the path to the kernel header. I suppied the /lib/modules/2.4.7-10 path, but I received an error message indicating that this was not the right path.

    My skills with linux are newbient so I might very well do something ignorant.

    Thank you

    -Pierre

    pmporter wrote:

    I will defintely look in CentOS. I think it is the only distribution that I did not run around!

    Despite my name, I am a citizen of the USA...

    Yes, I expected, joking just :-)

    Would be very difficult to spell for the average, like mine, Urs.

    For LAMP to come, I'll also choose CentOS.

    I love Ubuntu for his extremely quick start and a minimum load. The server for the VMS operating system is very low.

    But better to learn because the differences are sometimes boring.

  • How the news works of linux vmware-tools associated with the support of actions HGFS?

    Just to clarify, if it is possible to get from VMware Tools for Linux Guest users qualified/developer/maintainer.

    If memory serves me right, from 12 Workstation, VMware Tools for modified Linux related with the way it handles stocks HGFS.

    Installation of VMware tools on many Linux guests, I always see the same behavior.

    In some installations it build hgfs module, in others it seems fair to connect on vmhgfs-fuse executable. No module hgfs not charged in this case of the kernel then HGFS works as expected.

    Exactly how it works under the hood, how to install VMware Tools/config, can determine whether it is necessary to build the module or just run vmhgfs-fuse?

    Well, strange person, not even VMware guys come on this subject. IMHO is a really interesting thing, I almost always use shared folders between guests and hosts, it's so easy and simple WHEN IT WORKS.

    The fact that no-one comes on this thread, show what I think always: products like workstation are profoundly less used, average people IMHO use 30/40 per cent of the potential software.

    Then, with a few hours and a few Linux guests many kind in hand machines (work with tools in both modes, hgfs.ko or fuse), investigated and found how it works by myself.

    This is what I found.

    Recent versions of VMware Tools for Linux now seems to check the fuse package installed on guest system installed and when they found him, they try to use vmhgfs-fuse (formerly an Open-vm-tools executable) to mount hgfs actions without the need of the hgfs.ko module and so without needing to compile the module often broken kernel. For example, hgfs.ko thin build up to kernel branch 4.4 and it is broken again on 4.5.

    The script vmware-config - tools.pl also seems power - also when it detects the fuse package - properly configure autostart for hgfs share.

    That's all, and it's very useful for me. Hope it will be for others.

  • Linux VMware Tools and their dependencies

    Hello

    I want to install VMware Tools on one Linux Virtual MACHINE created with Workstation 10.x for Windows.

    Ce Linux distribution drift since Ubuntu 13.10.

    Je would like to know What packages are needed for a correct installation et configuration of these Tools.

    Also, I have would like to know If there is a Ubuntu repository where to download and install the latest version of these Tools.

    Thank you

    Good bye

    What is the difference between VMware Tools and Open Virtual Machine Tools?

    Copy and paste this question into Google!

    By chance, you have your repository in order to always download the latest version?

    I use only VMware tools and always uninstall first Open Virtual Machine Tools and also use - clobber-kernel-modules = if necessary when installing the VMware Tools on the distributions that have Open Virtual Machine Tools installed.

  • Kickstart: linux + vmware workstation 8?

    Hello!

    Im getting a kickstart for Linux guests with vmware workstation 8.

    is there a howto or whoever did this?

    concerning

    Lars

    I'm not immeaditally aware of anyone doing this.  I guess you are using a Red Hat based for this distribution?  If so, you will want to install the development tools (the kernel headers and gcc and friends).  Installation of WS should be done some time in the section cusomization of scripts of the kickstart file.  If RIP you in the installer of WS, you will find the flags that will reduce the amount of questions asked (and if you dig enough deep to eliminate questions).  Start the installer of linux WS help section to find the minimum set of afroementioned of the flag of questions.  I would like to know how it goes... looks like fun

  • installation 1oglinux on oel using vmware and vncserver

    I am installing oracle 10g on OEL use vmware, winscp vncserver now the problem is with the oracle_base
    How can I set the oracle using the export base command
    I m by issuing a command to export ORACLE_BASE = / u01/app
    but when I run the installer of the oracle is installed on the base directory?
    Why is it so and how can I rectify?

    987018 wrote:
    can you please type the command needed for this

    as what I should write now?
    and where should I issue the command export ORACLE_BASE = 01/u01/app

    The same command line session where you launch runInstaller.

    the oracle user? or the root user

    You answered my previous question... If you were reading and following the Installation Guide, you'd know that you shouldn't do everything as root.

  • Installation of ColdFusion on (k) Ubuntu 12.10

    Nice day

    Im trying to install coldfusion 10, (also tryied 9) on kubunu 12.10.

    I've installed several times the 12.04 and before.

    During installation when I try to add apache web config and I come to this question.

    Which directory contains your Apache configuration file (httpd.conf)? (For the)

    example on Red Hat Linux, it could be located in the/etc/httpd/conf

    Directory, if you have installed a RPM, or for SuSe Linux, it might be

    (/ etc/apache2)

    Directory: / etc/apache2

    Path not valid for the configuration directory (the path does not exist or does not

    contain the configuration file).

    Which directory contains your Apache configuration file (httpd.conf)? (For the)

    example on Red Hat Linux, it could be located in the/etc/httpd/conf

    Directory, if you have installed a RPM, or for SuSe Linux, it might be

    (/ etc/apache2)

    However, the problem is that/etc/apache2 is the correct directory

    When I go to see the directory and run ls

    There is no file httpd.conf.

    However if I browse my computer in forefox, I get IT WORKS so I know not apache works

    12.10 made disappear httpd.conf and if yes, how can I install coldfusion

    If it helps im under 64-bit

    Concerning

    OK figured it.

    Hope this helps someone.

    Before installing coldfusion executed

    Touch /etc/apache2/httpd.conf

    then

    Nano /etc/apache2/apache2.conf

    {

    #add the next in line

    Include the mods-enabled/*.conf

    Include the file httpd.conf

    }

    then /etc/init.d/apache2 restart

    then install coldfusion as normal.

  • During the installation of Win - xp pro vmware error 10 as mentioned below

    During the installation of Win - xp pro in 10 vmware, it is showing "OPERATING SYSTEM IS NOT FOUND" how to solve. I scoured the file .iso record and properly connected to all readers. Help me solve this problem.

    I think you'd have better luck if you go to the website of VMware support.

    http://www.VMware.com/support.html

  • Installation of ColdFusion on Windows 10

    Someone at - it installed with success CF11 (or any other version) on Windows 10 machine?

    I installed IIS, ISAPI, ASP.NET and CGI Extensions.  The CF11 Installer seems to work well and got to the point where it would normally launch CF Admin and came up with a 404 error.  I run the Web Server Configuration tool, and it appears a warning box that says "Version 10.0 installed. Versions supported are 4.x, 5.x, 6.x, 7.x, 8.x"after that I chose all IIS sites. Also, it isn't a record numbered under c:\ColdFusion11\config\wsconfig\ as it should, there is no mappings for the CF file extensions in IIS.

    You'd think that adobe would be all this because many developers will soon move to Windows 10.

    This problem has been fixed. The latest version of CF 10 / 11 update added 10 Windows / IIS 10 compatibility.

    Updating ColdFusion 11 7

    Updating ColdFusion 10 18

  • Installation of Browser-Appliance in VMware Player 10.0

    Hello

    I am new to the use of vmware and I'm having hard installing 10.0 Firefox Browser-Appliance in VMware Player.  The problem is when I go to create a virtual machine and try to give a path where one can read '(iso) installation disc image file' but it comes up with "file not found" and "no operating system found".

    I even have difficulties to find the path when I unzip the file Browser-Appliance 10.0, I did successfully for a few months but when when I went once again I couldn't remember how to do it.

    Any advice will be highly appreciated.

    The browser is ready for use, so you don't need to "create" any virtual machine!
    Instead, once you have unpacked the 7 - zip package, you select 'Open a Virtual Machine "and find the file Browser - Appliance.vmx .

    Then click on 'Open' and finally 'play Virtual Machine '.

Maybe you are looking for

  • When you send the Web page link, the link is not active

    When I want to send the link to a Web page I visit, I choose my yahoo email account and the webpage link is inserted in the email box, but it is not an active link and cannot be clicked for this person to go. They could, however, copy and paste the a

  • Want to sync an iphone with 2 laptops (itunes) with the same account ID

    Hello I'm new on this forum, before writing I googled my request, but did not get the exact answer to my problem. Perhaps my response was already supported and somehow I missed it. I have: 1: Personal Iphone 1: personal laptop (ITunes installed with

  • HP Webcam HD2300: Webcam does not not to Skype

    Purchased January 2016 as well as new office 450 Slimline, when Skype was set up for me and the device worked, but now I want to use Skype, although when I turn on the PC a light briefly shows, when I click on onSkype nothing happens.  I'm really not

  • CP1515n, printing problems

    I currently have a problem with printing of text. It will only print in black and in color. Nor cut art printed in color. Other color printing is fine The problem arose when my pc upgraded to windows 8.1. After spending a lot of time to download the

  • How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

    How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3 Given a PC without hard disk... How can you use a flash drive instead? So, indeed, the USB key works as an SSD... I saw online options that giv