installation of daemon tools
I have a problem when installing daemon tools ver.4304 lite in my win 7
always demonstrated
"this program need atleast win 2000 and STPD 1.51 or higher, kernel debugger must be disabled"
even after I install STPD 1.59 win 7 ask to reboot and I'll start all over again and again
what I have to do 2?
Daemon Tools does not work on Windows 7. Until a new Windows 7 compatible version is available, you will need to use another program. You can use the virtual Clone drive. It works on Windows 7. That's what I use myself.
See you soon
I have a simple philosophy: just assume everyone is a piece of _ and then be pleasantly surprised if you find someone who is not.
Tags: Windows
Similar Questions
-
Daemon tools lite is is not loading
Hey guys Im having a problem with Daemon tools lite. I get an error message. Bebugger of the core must be disabled... help... .Windows is set to start normally, and I don't seem to find any info. Thank you would appreciate your help
The kernel debugger settings are accessible via the button Advanced MsconfigStartup tab
-
HIII,
I am could not install daemon tools in my windows 7, please help meContact: http://www.daemon-tools.cc/eng/home. This should help. This isn't a question of Ms. Frenchie
-
When I use Daemon Tools Pro, it says "this program requires at least windows 2000 with SPTD 1.60 or higher. Kernel debugger must be disabled. "I've already installed and ran before... now it is said that at random. I tried to reinstall, Setup internal error, error code 14. Apparently, this happens to many users of windows XP to Windows 7, I tried looking for it in google and very few people know how to solve and those who confuse me.
I have the latest version of everything on my computer. and it used to work, but randomly completely messed my computer, it kept restarting and everything went blue with the code that runs through it. Ive ran several antivirus RELIABLE detectors but everything is clean.
but I just installed MagicDisk which is freeware and exactly the same.
-
I remove options in the main menu in Daemon tools pro advanced version 5 bar, now I can't get back them, can someone help me how to recover the menu buttons in the user interface of the daemon tools toolbar
original title: daemon pro toolsHello
The question you posted would be better suited to the community of Daemon Tools. Please visit the link below to find a community that will provide the support you want.
http://www.daemon-tools.cc/Eng/support -
hardware device after installing daemon tools tsstcorp l633c driver does not it appers unrecognized
Hello
After a while of installing daemon tools lite dvd driver tsst corp l633c ther not recognized driver
It was with the name of DTSoftBusCd00 and tsstcorp l633c 3 drviers
then I uninstalled the daemon tools but the same problem has not been resolved, then I used the troubleshooting and Device Manager it recognized as CD drive
try to install the driver he repeats to me device not found please help
Hello.
1. you remember to make changes to your computer of the page?
2. you have multiple DVD burning software installed on your computer?
3. What is the brand and the model number of this DVD player?
Follow the below mentioned steps and check if it helps.
Step 1 Run the fixit from the below mentioned link.
http://support.Microsoft.com/kb/982116
Step 2. Follow the link below to run the tool material and devices,
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Step 3 Uninstall and reinstall the cd - dvd drive.
If the drive is not listed, remove and reinstall the existing drivers.
To do this, follow these steps:
a. Click Start and then click Control Panel.
b. click System and Maintenance, click System and then click on Device Manager.
Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.
c. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
d. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.Step 4. The firmware was updated.
I would also recommend updating the firmware of the CD - DVD drive.
You may need to contact the manufacturer for it. -
Problem Dell cutomized installation of VMware tools image
Hello. I installed VMware-VMvisor-Installer-5.5.0.update02-2068190.x86_64-Dell_Customized-A00.iso on server r.620. HASH value of the file you downloaded is the same as on the download page. When I try to install tools on virtual welcome message pop - up tarball damaged for linux guests. Also for windows guests message that Setup cannot start. Is there any way to solve this problem without reinstallation of the system?
Hello
Here are some articles that might be helpful to solve this without having to reinstall the host.
-
Windows 8 to 8.1 Windows of the ISO of Windows Installation Media Creation tool
I have Windows 8 on my laptop and I want to upgrade to Windows 8. 1. I have two options:
Since Windows Store
Installation of Windows Media creation tools.
Upgrade a downloaded ISO of Windows to install Windows Media creation tools 8.1 will ask me for any product key or it will update just as if update Windows Store?
I have no product key. Upgrade the Windows store and even ISO file?
I'd prefer what option? It will automatically activate over the internet, after that the installation is made via the ISO downloaded by Windows Installation Media creation?Hello
If you download the Installation of Windows Media creation ISO tool or create a flash drive, you will not have to download it again if something goes wrong... This would be my choice...
It will be activated after installation is complete, it will use the same license as your current 8 Win...
You will make the upgrade of Windows while it is running, only not by starting with ISO or any other bootable media...
The creation of media Windows Installation tool will not ask a key download ISO...
The creation of media Windows Installation tool will not install upgrade... You will need to start the process yourself...
-
I used to use VMware Workstation 10 and recently upgraded to VMware workstation 11. However, whenever I try to install a newer version of VMware tools, it will fail with message saying something like "VMware Tools can be installed in the Virtual Machine.
Yes, I am trying to install VMware Tools within the guest operating system, but I get this notification for all my virtual machines, I'm running.
I'm under 6 Virtual Machines simultaneously and they run on Windows 7 32 bit OS and configured with 4 GB of RAM, 1CPU, 100GB HD + 5 GB second HD for the swap file, NO printer, no sound card.
For each virtual machine, I changed about 50 + key of Windows registry and detect the values to hide from all the programs that they are running on the virtual machine.
I assume due to records, I changed, it confuses VM installer who it is not running on a Virtual Machine. Then I tried to change all these registers changed to send it back to the original value, yet I is always the same message.
I must be missing either some registry values or values that I restored is false. But I don't know which is the case.
I can simply delete all my Virtual Machines and start again with the new virtual machine, but I don't want to repeat this process whenever a newer version of the VM tools out. and installation of windows and search and replace registry values for each virtual computer is full of works.
So, here is my question. Anyone know how to force the update / install VM tools in my virtual machine?
P.S. I added under scripts in the file .vmx for each of the virtual machines. I don't think it would cause the problem but just in case I include it.
SVGA.vramsize = 268435456
monitor_control.restrict_backdoor = "" true ".
insulation. Tools.getptrlocation.Disable = 'true '.
insulation. Tools.setptrlocation.Disable = 'true '.
insulation. Tools.setVersion.Disable = 'true '.
insulation. Tools.GetVersion.Disable = 'true '.
monitor_control.disable_directexec = 'true '.
SMBIOS.reflecthost = 'true '.
memtrimrate = '0 '.
mainmem.usenamedfile = "false".
sched.mem.pshare.Enable = "false".
prefvmx.userecommendedlockedmemsize = 'true '.
Tent Installer to get the version information of the hypervisor of underling to see if it is a VM or not. This is done by contacting by back door.
Setting monitor_control.restrict_backdoor = "true"prevents communication."
-
Hello
I realize this has arisen before but other that the proposed upgrade to v4 pxelinux.0 solution (which I did), I can't solve my current problems of pxeboot default due to #.
Tools.T00: file not found on a network of esxi 5.5 installation
That's what I see in the tftp log:
Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: /esxi55/tools.t00 to 9.20.170.34:49234 serving
Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: width option-> 167559911
Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: blksize option-> 1408
Dec 09 17:07 ptc34551.hursley.ibm.com as [14604.1840335168]: file asked to increase much, BLKSIZE
which according to VMware KB: ESXi 5.x fails to install when using PXELINUX is due to running a 32-bit version of pxelinux.0
rpm of syslinux containing pexboot.0 is syslinux-tftpboot - 4.02 - 7.2.el5
The other suggestion to avoid tftp to build the vmware host must use nfs in the boot.cfg settings.
It was a post that not solved and the settings, I did to get the system to build via nfs instead of tftp failed
If anyone has any ideas it would be great
Concerning
Paul
Hi Paul
Tools.T00 contains the iso files that you will need to install vmware tools.An installation without tools.t00 seems to be fully functional - but I'm not 100% sure on this subject.
My suggestion has been designed for troubleshooting - so if possible to continue your search for the real problem.Your tftp can be used not the largest files x MBs - either you hit a timeout - because the package does not arrive fast enough.
Ulli
(here I made a testsetup without tools - if I find other missing features I'll let you know...) -
Installation of vmware tools windows server 2012
I have to do something special to install vmware tools on a machine virtual windows server 2012, or just run d:\setup?
Thank you.
As long as it is the Fusion of 5 or above, just run the installation program.
If Fusion 4, you may experience problems with the video driver that I don't see if Fusion 4 was never updated to officially support Windows 8 guests. In this case, however, if the only goal is to get something running, be sure to disable the video driver from the VMware Tools installation.
-
No automatic installation of VMware Tools after the P2V migration
I wanted to migrate a Windows XP Machine Workstation 8 and everything worked fine.
Then I tried to start an application in this virtual machine and it doesn´t work. I made a second migration before tools VMware and the driver installation has been finished, I started the application and it worked. But after installtion it didn t work more.
I tried to cancel the installation, but that luckily possible.
My question is: How can I force the virtual machine, that it does not install not the drivers and tools automatically? And how do I install only parts of the drivers and tools?
Do not turn it on in the first place - or like a rude thing - rename temporarily the windows.iso
-
Installation of VMware Tools default Chinese
Hi, I've migrated just a Windows XP computer in a virtual machine on merger 4.1.
Works fine, except that when I try to uninstall software that is no longer needed by using the Windows Add/Remove programs of standard tool, all dialogs are in Chinese. This happens for some software to uninstall, but not others.
I guess I blame that on the individual software programs, except that the dialogues were all in Chinese, also when I tried to install VMware Tools.
I guessed the meaning of the different choices during the installation, choose 'Typical', and the tools are installed and I restarted Windows.
Now that dialogue tools boxes are in English, but every time I click the button help in the Tools dialog box, the help files are all in Chinese.
I found a similar problem posted at
, where the poster creates an image of Win7 using its installation media rather than through migration of an existing computer. The solution success he had to re - run the installation without using Easy Install. Unfortunately, the migration of VMware tool does not offer me the possibility to use or not using any method of easy installation.Someone has seen this before, or have any ideas?
Thank you
Have you already checked the language settings in the start menu-> Control Panel - "Regional and Language Options"?
André
-
try installing the tar.gz file and cannot get anything to work.
documentation to install said tar zxpf and it does not work. also found items showing xzf and xvzf zxf tzvf
also tried gzip - dc filename. tar.gz | tar xf-
in the terminal under su password I find the tar in/media/cdrom
then the installation directions do not seem to work.
any help would be greatly appreciated. you try to run Fedora 12 x 64 as a guest with the host Windows 7 running vmware 7.0
Larry
He may be trying to unpack and there unzip in the directory of the cdrom which is read-only. You can try the following
CD/tmp
DF - h. # make sure you have little space in / tmp to decompress the files
tar - xvzf /media/cdrom/filename.tar.gz
It should unzip it in a directory called VMWare... somet
Start the installation
Run /usr/bin/vmware-config-tools.pl
rm - rf/tmp/VMw...
-
need to get the installation for vmware Tools packages
Hello
With the help of ESX 4. I need to get the installation packages for the vmware tools for each version of Windows Server 2008 R2, Windows Server 2008 (x 86 and x 64) and Windows Server 2003 (x 86 and x 64).
1. where can I get them?
2 support without monitoring/silent install? I need to add them to an existing deployment routine.
Thanks in advance!
All the tools on your ESX host .iso files can be found in
/vmimages/tools-isoimages/
There is a way to push tools, but part of the upgrade tools are NETWORK card drivers and you can lose some pings or experience of ping times raised the expectations of the customers.
An example of a sudden of thumb through AD is http://itknowledgeexchange.techtarget.com/virtualization-pro/how-to-install-vmware-tools-through-windows-group-policy/
Maybe you are looking for
-
I want to know if the activation of bluetooth in your iPhone setings drains your battery more quickly.
-
Vista constantly crashes whenever I turn on Satellite A300
Hello I have a Satellite A300 and every month or so I have the problem that Vista freezes constantly whenever I turn on the laptop. I made 2 HARD drive Recovories who have always allowed the fault, but this time, when I tried a restore from the HARD
-
Results Etrecheck - Suggestions?
Nice day Here are my results of etrecheck. I've removed as much of old movies and emails, but I think I should more RAM. Thank you jniner EtreCheck version: 2.6.6 (226) Report generated 15/12/29 16:41 Time 02:42 Download EtreCheck from http://etreche
-
Two MacBook with a mg6320 - can scan the other cannot
Hi all I have two Macbook Pro, the Mavericks running. I installed any software of Canon printer on either. On one of the macbook pro, I can scan my wifi connected MG6320 in construction in Preview app. On the other hand, I can't. It is said that
-
You need to reinstall Windows XP. Do I need the CD of the motherboard?
Hello someone gave me a computer with some virus on it. I want to wipe the hard drive and install xp. Here's the question-have I need motherboard cd (which I don't have) for installation? or can I just put the xp cd in and then finished? the mb cd wo