Installation of El Capitan and printer

My Canon LBP5050n network color laser printer more iSensys need reinstallation after system updates. Lately a power failure caused Mail and printers be reinstalled. This time I couldn't even get my Canon LBP5050n USB iSensys / running network printer. After that has occurred with the Mavericks already, I received the support of Canon a procedure to reinstall with a new pilot V38X CAPT. In its folder under Documents/GUIDE-CAPT-UK/index.html, we find the following commands to uninstall the existing drivers. A procedure that I have lived several times

  • / Library/printers/Canon/delete CUPSCAPT
  • / Library/LaunchAgents/delete jp.co.canon.CAPSCAPT.BG.plist
  • / Library/printers/PPDs/happy/Resources/ldelete CNMCLBPXXXX.ppd.gz
  • Remove the printer in the control system
  • Restart the iMac
  • Remove the trash
  • Installation driver for V3XX CAPT (now downloadable V386, Jan 2016, since the Canon Website)
  • Download new NetSpot Device Installer (does not work with Yosemite and model)

Installation of 3 plugins of the Netspot NSDI folder:

  • NSDI-devicenote - plugin.pkg
  • NSDI-savelist - plugin.pkg
  • NSDI-saveNICsettings - plugin.pkg

IP address using ARP/PING command D)

  • Start Terminal.app (see screenshot):

  • Beginning Netspot Device Installer (only worked before the Mavericks...)

This program identified the LBP5050n printer with its address (00:00:85:d3:03:54) and gives an address format 10.0.1.X LP)

to add the printer as indicated:

  • Add the printer software (5050)

The guide indicates that any error can be unimportant.

I went through this scheme with the IP addresses 10.0.1.X, 192.168.0.215, or 00:00:85:D3:03:54 (address of the printer). See screenshot:

I can't do it with the cable network or USB direct... The Statusmonitor printer seems to send data to the printer, but not printing.occurs.

With respect to network settings, the IP address of the printer will not change when you make the deletion of the CAPT driver - or old files on Mac Netspot. If the IP that the printer has primarily deleting files must always be the same. I see a screenshot you tried to ping the printer with 192.168.0.215 and he did not. Then you show add you the printer using an IP 10.0.1.2. Are sure you that it is the IP used by the LBP5050? I have a question it because assuming that your router would use 10.0.1.1 then it suggests that the printer has been the next device to get an IP address, which seems strange, when you would have other devices such as the Mac on the network. Are you satisfied that the LBP5050 received the IP 10.0.1.2? And if yes, then if you ping this address IP do you have an answer?

An important note on the Canon CAPT driver is that it relies on a file named ccpd.conf located in the Library Caches ▸ ▸ ▸ ▸ PCCC CUPSCAPT Canon. This file translates the network (and USB connection) to localhost port used by the driver. If this file is not updated so it will have the wrong network address and this will stop you printing. So, in the context of the removal of driver you indicated, I also recommend that this file is deleted before you install the latest version of the pilot CAPT.

Also note that so that the printer to create properly when adding printers and Scanners, the Canon CAPT Backgrounder process should run. So open up the activity monitor and verify that you can see this process.

Tags: Mac OS & System Software

Similar Questions

  • I accidentally deleted iPhotos after installation of El Capitan and were not able to download or reinstall.

    I accidentally deleted the iPhoto app on my new mac after installation of El Capitan and are not available for download, except the updates, which obviously doesn't work. How can I get that back?

    You can probably not - most likely, you will need to switch to Photos (what would happen sooner or later anyway)

    Have you looked under purchases in the app store?  Can't update iPhoto because it is not available in the App Store

    If it is not there you can try reinstalling iPhoto 11 of the original source and the upgrade to 9.6.1 but I doubt it will work

    Or you can try to restore your backup from just before you shape did this error

    Good luck

    LN

  • Cannot read iphoto library stored in an external drive, after the installation of el capitan and photos

    I can't read iphoto library stored in an external drive, after the installation of el capitan and photos, can anyone help?

    What size is the drive? How are you connected to it?

  • My MacBook is so slow after installation of El capitan and filevault does no encryption

    Hello, so I just installed OS X El Capitan and now my MacBook is so slow and keeps freezing, I cleaned my MacBook and it is still slow and always gel. I tried to turn off filevault encryption but it says that I can't turn off until he finshes encryption I tried restarting but nothing works. I also have a problem with the wifi connection, he is saying that it is connected, but does not do anything and I get a message saying that there is no internet connection. I have a MacBook pro 13 inch, beginning 2011. If anyone can help it would be greatly appreciated! I can't really consider anyone because I have exams in a few days and I need mines for study. Thanks in advance

    You ""clean " your Macbook?" With what?

  • Just installed Mac OS 10.11 (El Capitan) and now can't print from Photoshop CS5.  All other software including working Lightroom 4 mode "Impression".

    I just installed Mac OS 10.11 (El Capitan) and now can't print from Photoshop CS5.  All other software installed, including 4 of Lightroom, has not printing problems.  Contacted Apple and they said that it is a problem for Adobe.

    Help?

    When you reinstall CS5, you start to 12.0 there's a 12.0.4 update that includes bug fixes.

    You need to directly download this update and before you install, go into osx security & privacy > general tab and temporarily allow app installs anywhere.

    Adobe - Photoshop: for Macintosh: Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5

  • Installed at El Capitan and now HP printer does not work via the network

    Installed at El Capitan and now HP printer does not work via wireless network

    Open system preferences > printers and Scanners and select the print tab.

    Then the right or control click on the HP printer on the left then click: reset the printing system

  • My 2 TB TC is full and will not back up. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

    My 2 TB Time Capsule is full and will not save. Yet, I have only 1 TB of data on my laptop. Note that I've reformatted the laptop since the last backup with a clean installation of El Capitan.

    I bought a 2 TB external hard and have used Time Machine to back up. But I also use my time Capsule, which I save wireless.

    Any suggestions on getting my TC back up?

    One suggestion would be to copy all existing backups that are now on the Time Capsule 2 TB hard disk. Then, clear the TC and start over again with new backups.

    A more expensive option... assuming you want to keep all old backups on the TC... would be to add a new TC and start backups goes in this direction.

    Another option... If you do not need to keep all old backups now on the TC... would be to erase the TC and start over again with new backups. The benefit of doing this would be that no new material will be necessary, but the downside would be that you lose your old backup history.

  • My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

    My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

    This general situation may be similar to what is mentioned in this sequel to thread of the CSA

    and if the remedy is to use instructions; detailed and I hope they are correct...

    Re: Restart fails after installation of El Capitan help!

    Or you can try and see on the repair of the system and then if your disk utility can

    See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

    the Mac system, to see if this solves the problem. There may be more than one cause.

    You could try and boot into OS X Recovery, utilities out there, and other options are available.

    • OS X: on OS X Recovery - Apple Support

    This example uses a special partition on the hard drive of recovery which is not in the

    same disc that the Mac OS X section; However if your hard drive is missing, these other

    items may also be at risk. You must have and maintain backups of your duplicate content

    on the external storage drives closed; In addition, a Time Machine backup helps to restore.

    • Apple OS X and Time Machine tips:

    http://pondini.org/OSX/home.html

    • Tips for OS X - using HD recovery:

    http://pondini.org/OSX/RecoveryHD.html

    {Using the utility disc and other tools can be done from the boot OS X Recovery volume

    Beware of the fact these tools can also delete or reformat your content; wiping.}

    Don't know what to say; you could see visiting an Apple store with genius if

    There is an official store. Usually for best time planning you would contact them for an appointment.

    Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

    a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

    In any case...

    Good luck & happy computing!

  • Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and i

    Since the installation of El Capitan, my streaming to my Audioengine DAC D2 cut after 12 minutes (the default duration of sleep). It will restart by pressing the space bar. When I change the duration of sleep, the cut outs are becoming more frequent and intermittent. Help?

    I checked the wifi and changed frequency (new modem, frequency change made no difference). The Board battery seems fine - all updates well. My computer is an iMac (2011), 3.1 GHz Intel Core i5, 8 GB 1333 MHz DDR3, with a new AMD Radeon graphics card. I recently installed a State strong 1 TB SATA drive and fitted with a LaCie Porsche 4 to USB for backup and a 4TB disk storage RAID LaCie drive.

    I'm frustrated, having to come in my computer since my living room every 12 minutes to continue to listen to Spotify on my stereo system.

    My guess is there a bug in the software of sleep in El Capitan, which disrupts his (I've tried different USB ports connect the Audioengine sender and same thing).

    Should I go back to Yosemite?

    Turiteaguy

    First of all, 10.11.3 OSX just came out. Try this.

  • Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the line: sudo etc. but it works. Any id

    Hi, I installed clean El capitan on my Mac and now I would like to create USB bootable, just in case. Should I re-download El Capitan installer from App store and move to applications. I try to write the next line: "sudo/Applications/Install\ OS\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/NameOfYourUSB--applicationpath/Applications/Install\ OS\ El\ Capitan .app X\ X\ - nointeraction", but it says: "command not found" no idea how to do it correctly. I think I'm missing what Installer applications...

    When you have completed the installation of El Capitan, the Setup program deletes itself. So if you have not copied somewhere else, you will have again the download on the App Store.

  • IE 10 printing error and print installation error page

    I can't print from IE 10, when I try to open the print layout I get this error message. "

    An error occurred to bring up the dialog layout. Error 13 object does not support property or method 'showpagesetupdialog.

    It's a new windows computer Samsung 8.

    I tried to reinstall IE 10 but can't find it as a standalone program to remove and reinstall

    Try it after it please:
    1. Unplug the USB cable from the printer to your PC.
      Note: For wireless printers, turn the printer off.
    2. Open devices and printers, click the Start button
      and then, in the start menu, click devices and printers.
    3. Right click on the printer icon and select remove device.
    4. Reconnect your printer to your PC with the USB cable.
    If your printer comes with a disc, this disc might contain software that installs a driver for your printer. If your printer came with the software, it may be necessary to go to the manufacturer's Web site to locate, download, and install the latest printer driver for your printer.
    Also, try to run your Internet Explorer as an administrator and try to print then.
    Please see the link too, as it might also be useful for you.
    http://support.Microsoft.com/kb/308260
  • Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I tried to

    Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I tried to download several times and in different places. That is wrong. Does´NT CS5 run on El Capitan? Or what else? Thank you.

    CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

    -which means you are trying to use CS6 and earlier at YOUR risk of having problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help

    Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

    -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

    -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

    -the guardian https://support.apple.com/en-au/HT202491

  • Since the installation of EL CAPITAN, I can't open pictures and iPhotos with photoshop, CS6, nor my mails with Office Word

    Since the installation of EL CAPITAN, I can't open pictures and iPhotos with PHOTOSHOP CS6, nor my mails with office Word

    Hi denisb,

    If you are not able to open the Photos App images directly in Photoshop then, this is the expected behavior as App Photos does not allow for any third-party application interact with it directly.

    You must export images from the Photos App and then open in Photoshop.

    Refer to this link: How to use an external editor with Photos for OSX | IVous

  • El Capitan and 10 + Mac I have installed so far

    Because I can't find too many reports on bugs that I lived during the installation/use a variety of Mac with El Capitan, I thought it would be a good idea to list the most interesting problems that I have encountered in the process. It is perhaps useful to other users.

    In my work during the day, I am responsible for the well-being of some 30 + Mac/Mac servers and their users. Since we are a prepress company, we need a very stable and predictable, and software environment. We arrived finally with a configuration which should suit our needs at least to come next year.

    Basic installation includes the software operating system, Adobe CreativeCloud, Office2011 and Eizo calibration.

    Since I wanted to know if the Mac are in good condition, I decided to go the long way with each machine, not only to drop an image on the disk and let it run. In doing so, I saw things much clumsy that I'll probably post on my printpraxis.net blog in the coming weeks (in German).

    To make things short - my list:

    1. We use monitors NEC 19 "for pallets in CC especially when using Photoshop on MacPros, white GUI elements on the secondary screen turn Cyan and back to white. Users, whose job involves working a lot with color calibrated, are extremely disturbed by it. We have not yet understood whether it is an Apple oder question to Adobe.
    2. Opening dialog print takes older (about 20 seconds) - including seeing the Rainbow wheel a lot. We will print to a Canon color with an EFI rip laser.
    3. In one case, the contacts address book is removed by the system whenever a contact is changed or a new contact is added. Every time. We seem to have "solved" this problem by deleting all the contacts 2 045 and re-import them.
    4. In one case, Mail fails to connect fully with our Kerio Connect, hide folders, the user has on Kerio and actually removes local folders without apparent reason. It is still not resolved and I'll try to look in this tomorrow. 'Repair' standard procedures did not improve the situation right now.
    5. Software Adobe CC indicates missing fonts - but Linotype Fontexplorer shows their alive. Disable and reenable the fonts "solves" this.

    I would add that during the process of wiping/reset to zero the internal disks and try to get the installer of El Capitan via the AppStore, Apple in some cases refused permission to install El Capitan, although the system is officially supported. I could solve this problem of booting from an external hard drive and installing from there to the internal drive. Interestingly, this seems to be about AppleID Apple user to provide forces. Our company at times code was refused and I had to use an ID to get setup.

    After all, Apple obviously does not test the OS on conventional HDs-since El Capitan is too slow for professional work on the turning points of metal. Samsung has been happy to provide us with six new SSD up to this point.

    If you have thoughts on this - or questions, do not hesitate to ask.

    Good day

    Jason

    I support macs in a prepress and other envorinement

    (1) there are similar reports of brushing causing screen flashes white for users of iMac with 4 K screens. I am a 3D artist in my free time and I read two developers mention OpenCL tools in Mac OS 10.10 and 10.11 must be fixed and both claim that Apple said in July they would solve this, but I've never heard an official response from Apple on this

    (2) connect the printers on IP and no other protocols if you have not already.

    (3) don't know about this one, I am not user

    (4) contact the developer. I used some LaCie spectrometer recommended in 2005, but this story. The calibration is the cocaine of the designer. End users are never satisfied with the results and there is no success with it no matter how much you try.

    (5) CC is the police knew, it could be he does not like the linotype app. I try to keep my fonts in font book and as long as I'm not greedy, it don't did me not questions but I gave up a lot of tools 3rd party because they were weird.

    I'll "the long way" so I got the images for the same work flawless on a mac mac model, and bananas go on another installs so clean solve a big part of that.

    good luck and post back with what you find if you can.

  • After the upgrade to el capitan, cannot print Canon mp970

    Upgrade to El capitan in snow leopard, and now I can't print from my Canon mp970. I went to the site Web of Canon for a printer driver is compatible with the new operating system - found nothing. Found some threads on Apple support community and found a suggestion that recommended to download and install the Gutenprint (CUPS + Gutenprint v5.2.11 - simplified pre2) software. I did that and removed the driver from Canon, but still cannot print. The message I get from the printer is: 'you need to install the software to use this printer. " To install the software, choose App Store... from the Apple menu. If the software for your printer is not available in the App Store..., contact the manufacturer of your printer. »

    Any suggestions on what to try next?

    Hi Dellis46

    I met the same problem and tried several things before finding the solution for the print job. You must install the drivers 'old' Mountain Lion. They still do the job.

    Go to: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-833845&os=OS%20X%2010.8%20 (mountain % 20Lion) & language = EN

    Download the .dmg package and open it. Dubbel click .dmg package and follow the instructions. Connect your printer by a usb cable and turn on the printer. If not now, it won't work!

    Then, go to the apple/menu logo and choose Preferences system - open printers & scanners - click on the button "+" under and on the left side.

    If the printer is on and the installation of the finished, .dmg package you should be able to see in a new menu 'Add printer' one or more printers. Add one you need. If your mac is connected to the local network you will see a usb and printer of netwerk MP970 canon MP970 canon (network printer takes a while to appear), including its network address. Add the two printers and name them differently to avoid confusion.

    Now everything should work.

    It is for the printer. I can't understand how making the scanner works. Run the .dmg package for the scanner is not operate :-)

    If someone is tried: http://www.canon-europe.com/support/consumer_products/products/fax__multifunctio (mountain % 20Lion) nals/inkjet/pixma_mp_series/pixma_mp970.aspx?type=drivers&driverdetailid=tcm:13-966569&os=OS%20X%2010.8%20 & language = EN

    I'd be more than grateful to the person who in fact occur...

    See you soon!

    Tjerri

Maybe you are looking for