Installation of extension Spinner does not work

Similar Questions

• Installation of Windows service does not work after Windows Explorer 9 uninstalling and reinstall Explorer 8

  Installation of Windows service does not work after Explorer 9 uninstallation and reinstallation of 8.  I followed several suggestions on this forum, but still no luck.  I ran the SFC system twice, who told me he had corrupted files.  "Some have been repaired and some might not be."  I then went in the event viewer after a start to the top and he stated that the 'Adobe APM service' is not found.  Also the "hpqddsvc' and the 'gupdate' is not found.  He tries to install something every time I start, but he abandoned.  I checked whether the system is on and disabled.  It's on.  There are a lot of small problems, but my main concern is the Adobe program.  I tried uninstalling and reinstalling Adobe, but still get an error message that the Windows Installer Service could not be accessed. Other suggestions?

  Hello

  I suggest you follow the link and check.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651

• Firefox installs Windows 10 but does not work

  I've updated my installation of Windows 7 Pro 64-bit for Windows 10, taking the opportunity (at the same time) to install a SSD and re - install everything from scratch. I tried (many times) to re - install Firefox, and while it seems to install OK, if I click on the Firefox icon to launch I get an error message: "Windows cannot access the specified device, path or file C:\Program Files (x 86) \Mozilla Firefox\firefox.exe.» You may not be allowed access to this file. »

  I tried to run with the Windows 10 firewall turned both works - but it made no difference. (My main firewall is Kaspersky Security Total.) Edge, Internet Explorer and Opera browsers work OK, but Google Chrome does not work either. Y at - it an idea of the problem here? I hope someone can solve it for me because I prefer to use Firefox over Opera. Thanks for your replies.

  It was very good work. Play well.
  Please report your last post as solved while others will know.

• Builder 3 extension debugging does not work

  Hello

  I'm developing an extension with extension 3 for Indesign CC (9.2.1) builder. The application runs, but I cannot provide debugging.

  I am using Luna Eclipse (Eclipse 3.6 does not work too) on Windows 7

  It is the ID of the extension in my manifest.xml:

  "< ExtensionList >.

  < extension Id = "my.extension.name.extension1" Version = "1.0" / > "

  < / ExtensionList >

  "

  It's my .debug file (I put in my root folder):

  "<? XML version = "1.0" encoding = "UTF - 8"? >

  < ExtensionList >

  < Id = "" my.extension.name.extension1 extension"/ >" "

  < parameter Listehotes >

  < host name = "IDSN" Port = "8088" / >

  < / parameter Listehotes >

  < / extension >

  "< / ExtensionList >.

  I launch the extension in eclipse with "debug as" and creation in Indesign. Then, with Google Chrome, I the url: localhost:8088, but it says that the page is not available.

  I checked the 8088 port is open.

  In localhost, I installed IIS but can work in the default port.

  Here is the CEPHtmlEngine log file:

  "2015-01-21 10:30:36: LogLevel INFO: 1.

  2015-01-21 10:30:36: ERROR occurs when getting debug port. "< unspecified file > (8): name of the element that is expected.

  I don't know what to do. Can you help me? Thank you

  Here are a few suggestions, you can try

  #1. Change your debug on port 8899 for example

  #2. Add this line to your main.js, well that its not mandatory with CEP 4.2 or later

  Window.__adobe_cep__.showDevTools ();

  #3. Make sure your .debug file is created using the command line tool and ends with the line break.

  #4. Double your .debug file is root of the extension.

  Mac

• M40X-250: Installation of the OS does not work

  Hello

  I just tried to upgrade to a standard installation of XP Home Edition to a XP pro edition. When installing the note happens that the facility lacks a mass storage device driver. Later, when you restart the pc it does not get through the start-up phase. Bluescreen fraction of a second and it restarts give me mode without failure of the standard options - previous installation-... Option all lead to the same loop.
  So here are my questions:

  (1) is the HD a SATA drive and therefore not yet supported by Win XP pro (I couldn't find the exact specifications of the HD)
  (2) where can I find the drivers for this problem
  (3) is there a solution anyway...

  Any help is welcome...
  R
  PS. : Yes, XP pro is a legal full version...

  Hello

  As much as I know this laptop came with a HDD 60 common GB improved Interface (ATA-6). In this case you n t need to install all of the SATA drivers.
  In my opinion, it is another question.
  I think you should try to install the Chip Set Utility and other Hotfixes Microsoft. The best way is to install SP2. In addition, the Toshiba site, you will find a few patches. You must install these files in the order that is listed on the download site.

  Good bye

• HELP WITH LINKSYS WUSB100 attached to the USB EXTENSION CABLE - does not work

  Hello team,

  I own a LINKSYS WUSB100 usb adapter I used for my wifes desktop... I can connect to my home network to surf the net, but the signal is weak...  I decided to buy a 25' EXTNESION USB CABLE, which comes with a MALE AND FEMALE ends... I simply PLUGGED the cable on my DESK and PLUG the other end of the USB cable from the LINKSYS WUSB100 card and waiting for the COMPUTER TO RECOGNIZE the card without any problems... To MY SURPRISE, the computer would not have hired the LINKSYS CARD... He said "the search for new deivce, peripheral found but not hired"(Something like that)... in any case the desktype sees the device, but willl not hired there as a LINKSYS and I cannot search FRO all networks... As soon as I unplug the LINKSYS of the cable and plug it into the USB port of the computer - BAM my network comes up with a weak signal... Can anyone understand this? My cable is too long?

  Thanks a lot for all inpiut!

  DOn

  dax0007 at hotmail

  There is a standard length for the cable. It will not work with 20 foot extension... Try the cable up to 3-4 feet short and check.

• Latest installer of Flash Player does not work

  I made a new clean install of Windows XP with SP2.

  Downloaded Mozilla Firefox 43.0.4

  I can download the Flash Player here:

  https://fpdownload.Macromedia.com/pub/flashplayer/latest/Help/install_flash_player.exe

  File size is 18.1 MB.

  However, when I try to install the Flash Player, the program installation downloads do not run when selected or when double clicked on to in the downloads folder.

  Installation of the SP3 would solve this problem?

  Hello

  It is possible, that there is a certificate problem.  XP SP2 does not support the latest cryptographic technology necessary to sign the binary installers.  SP3 has this support. XP is no longer supported by Microsoft, and I do not know if you will be able to find an installation of SP3.

  --

  Maria

• Installation of Photoshop CC does not work

  During installation (50% reached) I have alwas got the error:... Please close the following application - ShellExtLoader

  

  Stop the program mentioned above, by restarting the computer... does not help.

  Concerning

  Daniel

  Hi Daniel,.

  Please visit: http://forums.adobe.com/thread/911758

• Installation network HARD disk does not work

  I recently bought a Ximeta Ethernet disk, which works OK on all the PC's on my network, except on my Satellite Pro P200 (Windows XP), which hangs (blue screen program from Ximeta NDIS.sys involving drivers and Ximeta disk power on the network.)

  I contacted the support of Ximeta, and they told me to update my driver of NIC (Intel 1000/PL).
  I've done IT (pilot real 2007 is April), but it will not solve the problem.

  It is not the first time that I have some problems in the installation on this laptop of some software that are installed without problems on other PC...

  Does anyone have an idea?

  Hello

  I know this sounds stupid and weird for you now, but a full system restore sometimes makes things better. Maybe you should try, and then update the relevant drivers and then try again. But do not install updates windows or 3rd party software before connecting your player to your machine, because it really sounds like some - heavy-metal-software-question - ;)

  Believe me, I restore images of my machines of my offices because after a while, I was so frustrated that the system slower and slower after a few months of work and many things didn t operate more like mouse, network, some year-round software...

  Hope I could give you an idea...

  Welcome them

• After the installation of Sierra, calendar does not work

  After installation of Sierra, when you open the calendar on my Mac, missing entries and the screen is frozen with the comment 'Moving calendars to the server account.' I signed that I the cloud to see if it would help, but I still have this problem.

  Hello and welcome to Apple support communities, Stanley Star.

  If I understand your message to the right, at the opening of the calendars for the first time after upgrading to Mac OS Sierra, you are missing calendar events and the app is frozen with a message saying "moving to Server account schedules. Calendars, this is one of my apps used on my Mac, so I certainly understand the importance of having the opening and operating as usual. I'm happy to help you to turn it on again!

  Icloud and a signature was an excellent step to try. Here are the steps I recommend to do next:
  

  1. Check that the date and time are correct in your Mac by following the steps in macOS Sierra: set the date and time on your Mac.
  2. Close the present calendars on your Mac. If you are also reminders, close that as well as reminders and schedules work together. If the calendars close normally, will not force close it by clicking the  in the upper left corner of your screen, select force to close, select the calendars in the list of open applications, and then click the button close Force.
  3. Go to System Preferences > iCloud and uncheck the boxes next to the calendars and reminders.
  4. Restart your Mac.
  5. A times restarted, open again your calendar application, select "Calendar" in the Apple menu bar in the left corner of your screen, select "Add an account", choose iCloud and sign in with your Apple and the password.
  6. Give your calendar some time to sync and charge all your data. Once it is loaded successfully, and you can see all your events, open the reminders and do the same steps for signing in iCloud there are also well.

  Thank you for using communities of Apple Support.

  Take care.

• CS6 extensions Manager does not work

  I downloaded a few extensions to use with my Photoshop CS6 version, but I can't seem to open the extensions Manager. I see it down in my bar tasks, but when I click on it nothing appears. I tried to access it from the list of program files and even right click on extensions and choose 'Open', but nothing. I am running Windows 7 Home Premium 64-bit.

  Any suggestion would be appreciated. Thank you.

  Download and reinstall. See if it works

  Adobe - Exchange: Download the Adobe Extension Manager

• Update of Photoshop CS5 serial accepted Installer, but Application Manager does not work

  Hi - I grappler had Photoshop CS4 for Windows, but I am now on a Mac and follow-up information on the upgrades to the platform. I called Adobe to upgrade to CS5 Wednesday and asked to change from Windows to Mac.

  The installer asked for the new series, she agreed and then asked a previous version, I gave him my Windows version CS4, which she also agreed. I was able to use Photoshop without problem Wednesday, but today, I get an error during startup.

  The Adobe Application Manager window opens with 'Adobe Photoshop CS5.1 trial provide a serial number', I re - enter the serial number that I have on my receipt for CS5 and it responds "this serial number is not valid for this product".

  I called Adobe support several hours ago and said to wait a few hours and try again, they have server problems. I'm not still have a bit of luck and it looks like even as it tries to connect to a server, as soon as I paste the serial number in, it is not valid.

  Any thoughts?

  Thank you!!

  Will be

  The server, problems have been resolved, so please reply to this thread if you continue to experience difficulties.

• After Windows Media Player 11 installation drive CD/DVD does not work

  Hello

  I installed WMP 11 via MS updated. The update done very well - but now the CD/DVD doesn't work. In "device management", the DVD is represented by a «!» I tried to update the device driver, but nothing has changed. Y at - it someone who has an idea?

  Ralf

  Hello Ralf

  The optical disk drive is listed in Windows Explorer?

• Installation of XP - F8 does not work?

  Do a fresh install of XP on a machine that previously has / had XP after the alleged attack hijackware.  Booted from the cd, got to "accept license agreement", press F8 and nothing.  No response from the system.

  Now what?

  When you start from the cd, you receive a message "Press any key to boot from cd" or simply start without requiring you to press the keys? Honestly, this looks like a keyboard problem. You have one of these keyboards with the F-Lock feature? If so, unlock it. You can also try with the "Tab" key to highlight to accept it, and then press ENTER. Is your keyboard PS/2 or usb?

• The new tab (+) does not work, or the file/new tab feature

  The new tab (+) does not work. The function of the file/new tab does no more work. Both had worked correctly until noon today. I haven't added any software, plug-ins or extensions today, I do not have the Ask toolbar. I tried several of the suggestions made on this site, nothing helps.

  This problem may be caused by an extension that does not work in the current version of Firefox.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes