Installation of LMS 4.0 on Windows 2008 R2

Similar Questions

• After the installation of the driver software my windows 2008 Server gives a blue screen. How can I go bak to original configuration?

  I get a blue screen after installing the drivers for my TM-T88IV from the internet. So I now can't log on because of the blue screen.
  How to return to the original state.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Windows Server général assistnce more far.

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...

• T420: H310 PERC Setup driver during the installation of Windows 2008 R2 SP1

  Hello

  I try to install the SP1 of Windows 2008 R1 on T420. However, it does not detect the disk and asks me to load the Setup disk.

  Now, I downloaded the driver from: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=1HHG8&fileId=3389750350&osCode=WS8R2&productCode=poweredge-t420&languageCode=EN&categoryId=SF

  Put it on a key USB and then the wizard to detect the USB but then he said: 'no signed device drivers were found.

  Reading carefully above the driver download page, they mentioned the installation instructions, it is shown how to load the driver during installation.

  HOWEVER, the real problem lies here. These instructions are for a '. '. ZIP format"driver. Considering that, they provide only ".". EXE format"from the driver to download.

  So, regardless of teaching the highest page download driver to load the driver during the installation does not work.

  And I could not find where to download the '. '. ZIP format' driver.

  Could you help me please. What I'm missing here?

  Thank you.

  You must use this driver:
  http://ftp.Dell.com/FOLDER01460337M/9/SAS-RAID_Driver_R2_4R5XT_A03_6.801.5.0_ZPE.exe

  Run it to extract the content, then put the content on a USB flash drive to use during the installation.

• Installation of Windows 2008 R2 on ESXi 5.0

  Hi all

  I worked with ESXi 4 & 5 running Windows 2003 OS invited without problems.  Just tried to install Windows 2008 R2 x 64 and face an interesting difference.  When installing windows 2003 I have to specify the details of the Virtual Machine, specifically the amount of disk space I want to be available to host everything.  Then start the virtual machine, newly created from the windows installation disk appropriate.  I then get prompt with the "blue" screen allowing me to partition the space according to the BONE and once installation is complete I can then go through the operating system and partition and format the remaining space, as I hear it.  Doing so to a Windows 2008 R2 x 64 installation disk and I don't you this possibility so the BONE ends by using all the space allocated to the host of comments.

  I guess I'm missing something blindingly obvious, but have not been able to track down any relevant information to this day.

  Yes, you really lack the partitioning part.

  This is after selecting custom selection (advanced option) > select the drive you want to install windows > click drive options and partition your drive.

  Best regards, Harold

• R12.1.1 installation in windows 2008

  Hello
  
  I am installing R1211 on windows 2008, but I get error checking has no utility below.
  
  
  
  C:\Cygwin\bin > uname - a
  CYGWIN_NT - 6.1 - WOW64 dev 1.7.17(0.262/5/3) 2012-10-19 14:39 i686 Cygwin
  
  System utilities
  
  command: cmd.exe /c F:\R12\stage\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\mks C:\msvc
  
  F:\R12\stage\startCD\Disk1\rapidwiz > echo off
  command "who is not available". Check the installation of MKS.
  ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
  'who' is not recognized as an internal or external command
  operable program or batch file.
  
  RW-50011: error:-the availability of utility systems test returned an error: 1
  
  
  I checked cygwin version is show perfectly, but when I checked it make version it's not showing.
  
  
  C:\Cygwin\bin > make - version
  'make' is not recognized as an internal or external command
  operable program or batch file.

  command "who is not available". Check the installation of MKS.
  ERRORCODE = 1 ERRORCODE_ENDThe system cannot find the path specified.
  'who' is not recognized as an internal or external command
  operable program or batch file.

  Please search for 'who' the executable file and make sure that the directory is defined in the PATH of the system.

  C:\Cygwin\bin>make--version
  'make' is not recognized as an internal or external command
  operable program or batch file.

  Please make sure you have cygwin\bin added to the system PATH - directory using Cygwin to keep Oracle E-Business Suite Release 12 on Windows [414992.1 ID]

  Thank you
  Hussein

• Failed to open oracle functions after R12 installation on windows 2008 64 bit

  Hi guys
  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions
  ""
  program currently running on this computer is attempting to display a message, then
  title of the message:
  E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin\java '-serv ".
  
  
  This problem come when a program is not completely compatible with windows
  ""
  This message when you start windows too, but the path of java inside files of oracle applications, please help me if oracle r12.1.1 compatible with win 2008 64 bit or not?

  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions

  Direct installation of R12 on Windows 2008 64 bit is not supported. You install it on a Windows 32-bit operating system, and then migrate to Windows 64 - bit.

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
  Migration Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]

  Thank you
  Hussein

• VMware Server on Windows 2008 R2 Server Core installation

  Hi guys!

  I installed the latest version of Vmware server on our new Windows 2008 R2 Server core installation, but I have a problem with it. When I create a virtual computer and try to start the Web UI:

  General system error occurred: unable to connect to the virtual machine

  Do you know something about the nature of this message? The Server service not had access to the possuble vitrual machine? But how can it create if it doesn't have access? I have not found the log files created in the folder of the virtual machine.

  Thank you for your help.

  Kind regards

  Jeremy

  I think that Server Core is an unsupported operating system. Please take a look at http://www.vmware.com/pdf/vmserver2.pdf (page 25)

  concerning

  Jose Ruelas B

  http://aservir.WordPress.com

• Oracle 9.2.0.8 on windows 2008 R2 64-bit client installation

  Dear expert database;
  
  for specific needs, we need to install a client 9.2.0.8 to have connectivity with various databases.
  
  As I am a beginner in Oracle, can you tell me if it's good?
  
  1st part of client install Oracle 9.2.0.1 full (in architecture 32 or 64 bits?)
  
  2. install the patches 9.2.0.8 Group (in the same architecture as the first installation)
  
  3. install Patch 30 with O-Patch
  
  I have a lot of problems to find good sources for the OS/Architecture (windows 2008 R2 64-bit) version, I'm not sure that the old version of Oracle can be installed on this configuration.
  
  Can someone help me and tell me that it is possible to do?
  
  Thank you very much.
  
  Kind regards
  
  Thibaud.

  Salvation;

  I suggest to you please read on

  Client / Server / Support of interoperability between different Oracle Versions [ID 207303.1]
  Note to master for the Installation of the Oracle database [ID 1157463.1] Client

  Respect of
  HELIOS

• OBIEE11g Installation with Windows 2008

  Hey,.
  
  I intend to OBIEE 11.1.1.5-* 64 * in a server with this configuration:
  
  OS: Windows Server 2008 R2 Standard
  Installed memory RAM: 24 GB
  System type: 64-bit operating system
  Java: jdk 1.7.0
  DB: Sql 2005
  
  
  I read it is possible to install the OBI 11 g with this configuration, but also it has not confirmed Administration BI tools in 64-bit, can someone confirm that please? If this is the case, what is the procedure suggested to install everything 64-bit, with the exception of Directors BI tools? Also, which type of installation I'll take? I read all the Simple options, Standard and configuration. Thank you much for the help.
  
  Kind regards
  RG

  RG,

  Your specifications for WIndows 2008 64 bit good machine look. I would double check the JDK and stick to the version of JDK 1.6 to stay in compliance. You should always check each component of your server complies with the matrix of product certification of the Oracle that you want to install.

  Regarding the Oracle BI 11 g Admin tool running on a windows 64-bit machine, it is possible. The only thing you have to watch out is that when you create a connection ODBC system DSNS on a server Oracle BI remote that you use the correct driver like Win 2008 64 bit allows a distinction and a console that is different to handle 32-bit drivers / 64-bit.

• Break the BI publisher on Windows 2008 64-bit installation

  Hello, everyone
  
  I need sense of simple installation on BI Publisher version 11.1.1.3 on Windows 2008 64 bit server to Oracle database 11g and Apex 4.0. The more I read the installation, I'm confused. Document ID: E10539-01 is very confusing to me. I'm sorry. The 32-bit with BI Publisher version 10.1.3.4.1 server is much easier to implement.
  
  Thanks in advance.
  
  Tigerwapa

  BI Publisher implementation is another story, but I think that the instructions for setting the version 4.0 of the APEX is identical to the version 3.x... You point apex on the port that you have installed BI Publisher on and the servlet that transmits information between APEX & BI Publisher...

  Thank you

  Tony Miller
  Webster, TX

  When you have enough clowns, you have a circus.

  If you answer this question, please mark the thread as closed and give points where won...

• Pre. Req. software for the R12.1.1 Installation on Windows 2008.

  Cheap DBA
  
  I am planning to install R12.1.1 on Windows 2008, before I have try to install before. s/o required on my local machine which is on xp.
  
  Following document.
  =============
  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
  
  I downloaded VC ++ from the following link
  
  Microsoft Visual C++ 2008 Redistributable Package (x 86) SP1 is available at the following Web site (of which users must download and install on the database layer node):
  
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=A5C84275-3B97-4AB7-A40D-3802B2AF5FC2 & displaylang = in
  
  I tried to install vc ++ 2008 but it installed on program files in c:, but it did not the path to install vc ++.
  
  kindly help me how installed VC ++ in the specified path.
  
  Kind regards
  SG

  SG,

  The software is not available for free download, and you have to buy.

  Thank you
  Hussein

• Windows 2008 SP2 installation failed with error code 0 x 80041002

  Hello

  I have a Windows 2008 x 86 with Service Pack 1 installed. I tried to install Service Pack 2, but failed with error code 0 x 8004102.

  I tried the steps in http://support.microsoft.com/kb/947366:

  1 uninstalled antivirus.

  2. install KB947821 analysis tool

  3. downloaded and run the standalone version http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en

  Without success. What should he do next?

  Thank you

  Frank

  Hi Frank_673,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on windows server. Please post your question in the forum.

  Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of Windows 2008 R2 x 64 as virtual machine using workstation7

  Hello

  I am trying to install Windows 2008 x 64 R2 as virtual machine on VMware on an ASUS Wndows7 teacher a new computer workstation7 laptop with i3 proc. I use an ISO image downloaded from Microsoft downloads.

  I get an error as follows:

  A required cd/dvd drive device driver is missing. If you have a driver floppy disk, cd, dvd or usb please insert now.

  When I try to search for the driver on flopp or cd/dvd, it is unable to find it.

  Could you please help me with this one.

  Thank you and best regards,

  Jacob TP.

  Hello and welcome to the forums.

  This error is most likely due to a corrupted ISO download.  Try to download it again and see if that corrects the problem.

  Good luck!

• Installation of vCenter Server on Windows 2008 Server R2

  Hi all

  I have the bits for vCenter 2.5 5 update and I try to install on a new Windows 2008 Server R2.  When I select the server option he returned that ports 80 and 443 are to use (which they are) and then advises to use the custom option.  I select custom and it indicates that the server cannot be installed and the client is available to install.  I'm missing something here, and vCenter Server will not install on R2?

  Any ideas?

  Thank you

  Anthony

  Hi Anthony,.

  vCenter 2.5 U5 cannot be installed on Windows 2008 Server R2.

  Please see page no. 15 of the http://www.vmware.com/pdf/vsphere4/r40/vsp_compatibility_matrix.pdf

  Thank you.

  If you have found this unit or any other answer useful, please consider to allocate points for correct or helpful answers. *