Installation of MacOS Sierra is not possible (no boot volume)

Similar Questions

• Computers on the local network does not show up after the installation of macOS Sierra

  Shared on my LAN Macs make their appearance is more after the installation of macOS Sierra. See the attached servers is checked in the preferences of the Finder and the computers appear in the list of DHCP clients on the router. I can see these computers to each other. Sharing is disabled on the computer of the Sierra. Any ideas?

  Thank you!

  p.s. I can not even 'go' to the IP address of these computers.

  Correction: I can afp: / and vnc: / to IP addresses (and so far as a temporary solution, I assigned permanent IP addresses in the router on all computers on the local network). Once I afp: on a local computer, it appears on the side bar of the Finder under shared devices, well I saw several times it appears and then disappears. Nothing has changed on the network since the installation of Sierra.

• Crashing apps and the slow performance since the installation of macOS Sierra

  Hello

  Im a user of long date Mac but displays the first time that I was pretty happy with everything that on my macbook pro for the past years... until I installed Sierra a day ago.

  Since installing everything works super slow and a lot of my apps hang and crash. Things are not rosy, here is my EtreCheck report - running current version 10.12 on my MacBook Pro (mid 2010) if anyone can help would be much appreciated. Thank you

  EtreCheck version: 3.0.6 (315)

  Report generated 2016-10-07 16:52:11

  Download EtreCheck from https://etrecheck.com

  Time 06:53

  Performance: Below average

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Apps are broken

  Hardware Information: ⓘ

  MacBook Pro Intel Core i5, Intel Core i7 (mid-2010)

  [Data sheet] - [User Guide] - [warranty & Service]

  MacBook Pro - model: MacBookPro6, 2

  1 2.53 GHz Intel Core i5 CPU: 2 strands

  4 GB of RAM expandable - [Instructions]

  BANK 0/DIMM0

  OK 2 GB DDR3 1067 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1067 MHz

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 371

  Video information: ⓘ

  Intel HD Graphics

  NVIDIA GeForce GT 330M - VRAM: 256 MB

  Color LCD 1440 x 900

  Software: ⓘ

  macOS Sierra 10.12 (A 16, 323) - since startup time: less than an hour

  Disc information: ⓘ

  Hitachi HTS545050B9SA02 disk0: (500,11 GB) (rotation)

  EFI (disk0s1) < not mounted >: 210 MB

  Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

  BOOTCAMP (disk0s4) / Volumes/BOOTCAMP: 86,37 (Go 31,68 free)

  Macintosh HD (disk 1) / [Startup]: 412,50 (GB 158,46 free)

  Encrypted AES - XTS unlocked

  Storage of carrots: disk0s2 412.88 GB Online

  MATSHITADVD-R UJ-898)

  USB information: ⓘ

  Logitech USB receiver

  Card reader Apple

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM2070 hub.

  Apple Inc. Bluetooth USB host controller.

  Computer, Inc. Apple IR receiver.

  Built-in ISight from Apple Inc..

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / System/Library/Extensions

  com [no charge]. Huawei.driver.HuaweiDataCardDriver (4.0.6 - 2016-10-04) [Support]

  com [loading]. Logitech.Control Center.HID Driver (3.5.1 - SDK 10.0 - 2016-10-04) [Support]

  com [no charge]. Driver Logitech.Unifying.HID (1.2.0 - SDK 10.0 - 2016-10-04) [Support]

  [no charge] com.leapfrog.driver.LfConnectDriver (1.0.6 - SDK 10.0 - 2016-10-04) [Support]

  NET [no charge]. Thomson.iokit.USBLAN_usbpart (1.6.0 - 2016-10-04) [Support]

  Startup items: ⓘ

  HWNetMgr: Path: / Library/StartupItems/HWNetMgr

  Startup items is no longer function in OS X Yosemite or later

  Launch system officers: ⓘ

  [no charge] 7 tasks Apple

  tasks of Apple 178 [loading]

  tasks of Apple 86 [performance]

  Launch system demons: ⓘ

  [no charge] 42 tasks of Apple

  tasks of Apple 167 [loading]

  tasks of Apple 95 [performance]

  Launch officers: ⓘ

  [performance] com Logitech.Control Center.Daemon.plist (2011-11-05) [Support]

  [loaded] com.adobe.AAM.Updater - 1.0.plist (2015-09-18) [Support]

  [cannot] com.adobe.CS5ServiceManager.plist (2010-07-14) [Support]

  [loading] com.google.keystone.agent.plist (2016-07-13) [Support]

  [cannot] com.teamviewer.teamviewer.plist (08 / 08/2015) [Support]

  [cannot] com.teamviewer.teamviewer_desktop.plist (08 / 08/2015) [Support]

  Launch demons: ⓘ

  [loading] com.adobe.SwitchBoard.plist (2010-07-14) [Support]

  com.Adobe.agsservice.plist [running] (2016-08-19) [Support]

  [loading] com.adobe.fpsaud.plist (2016-08-30) [Support]

  [loading] com.apple.installer.osmessagetracing.plist (2016-09-14)

  [loading] com.google.keystone.daemon.plist (2016-09-02) [Support]

  [loading] com.teamviewer.Helper.plist (2015-03-03) [Support]

  [cannot] com.teamviewer.teamviewer_service.plist (08 / 08/2015) [Support]

  User launch officers: ⓘ

  [loading] com.adobe.AAM.Updater - 1.0.plist (2010-07-16) [Support]

  [loading] com.adobe.ARM. [...]. plist (2011-09-13) [Support]

  [loading] com.adobe.ARM. [...]. plist (2010-07-14) [Support]

  com.nero.HSMMonitor.plist [running] (2016-10-07) [Support]

  Plug-ins Internet: ⓘ

  DirectorShockwave: 12.0.6r147 - SDK 10.6 (2013-11-25) [Support]

  OVSHelper: 1.0 (2010-12-10) [Support]

  OfficeLiveBrowserPlugin: 12.3.6 (2013-03-22) [Support]

  NP_2020Player_WEB: 5.0.7.0 (2011-04-03) [Support]

  AdobeAAMDetect: AdobeAAMDetect 1.0.0.0 - SDK 10.6 (2015-09-18) [Support]

  FlashPlayer - 10.6: 23.0.0.162 - SDK 10.9 (2016-09-29) [Support]

  AdobePDFViewerNPAPI: 11.0.10 - SDK 10.6 (2014-12-03) [Support]

  DivXBrowserPlugin: 2.1 (2010-12-10) [Support]

  QuickTime Plugin: 7.7.3 (2016-09-14)

  Flash Player: 23.0.0.162 - SDK 10.9 (2016-09-29) is unable to contact Adobe

  iPhotoPhotocast: 7.0 (2010-07-14)

  Silverlight: 5.1.30514.0 - SDK 10.6 (2015-01-17) [Support]

  AdobePDFViewer: 11.0.10 - SDK 10.6 (2015-03-29) [Support]

  JavaAppletPlugin: 15.0.1 - 10.12 (2013-10-25) check the version of the SDK

  User Plug-ins internet: ⓘ

  Picasa: 1.0 (2011-03-29) [Support]

  Safari extensions: ⓘ

  DivX HiQ - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)

  DivX Plus Web Player HTML5 < video > - DivX, Inc. - http://www.divx.com/en/software/divx-plus/web-player/ (2010-12-21)

  3rd party preference panes: ⓘ

  DivX (2010-12-10) [Support]

  Flash Player (2016-08-30) [Support]

  Logitech Control Center (2011-11-05) [Support]

  Time Machine: ⓘ

  Time Machine not configured!

  Top of page process CPU: ⓘ

  5% kernel_task

  5% WindowServer

  1% com.apple.AmbientDisplayAgent

  1% xpcproxy

  0% fontd

  Top of page process of memory: ⓘ

  Kernel_task 432 MB

  Mdworker (15) 430 MB

  Airmail beta 283 MB

  152 MB Finder

  Sandboxd 147 MB

  Virtual memory information: ⓘ

  476 MB free RAM

  3.53 GB used RAM (1.41 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  7 October 2016, 16:39:48 Self test - passed

  7 October 2016, 16:20:48 ~/Library/Logs/DiagnosticReports/Airmail Beta_2016-10-07-162048_ [redacted] .crash

  / Applications/Airmail Beta.app/Contents/MacOS/Airmail Beta

  October 6, 2016, 08:17:31 PM/Library/Logs/DiagnosticReports/App Store_2016-10-06-201731_ [redacted] .hang

  / Applications/App Store Store.app/Contents/MacOS/App

  October 6, 2016, 07:52:21 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-195221_ [redacted] .hang

  October 6, 2016, 14:37:32 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143732_[redacted].hang

  /Applications/preview.app/Contents/MacOS/preview

  October 6, 2016, 02:37:26 PM/Library/Logs/DiagnosticReports/station air Beta_2016-10-06-143726_ [redacted] .hang

  October 6, 2016, 14:37:22 /Library/Logs/DiagnosticReports/firefox_2016-10-06-143722_[redacted].hang

  /Applications/Firefox.app/Contents/MacOS/Firefox

  October 6, 2016, 14:37:18 /Library/Logs/DiagnosticReports/Pages_2016-10-06-143718_[redacted].hang

  /Applications/pages.app/Contents/MacOS/pages

  October 6, 2016, 14:37:12 /Library/Logs/DiagnosticReports/AdobeAcrobat_2016-10-06-143712_[redacted].hang

  / / Applications/Adobe Acrobat 9 Pro/Adobe Acrobat Pro.app/Contents/MacOS/AdobeAcrobat

  October 6, 2016, 14:36:50 /Library/Logs/DiagnosticReports/Preview_2016-10-06-143650_[redacted].hang

  UNKNOWN PATH

  Try this first: what happens if you start in safe mode (hold down the SHIFT key during startup), the problems go away?

  Try this second in normal startup mode: what happens if you create a new user account and log in as that user, the problems go away?

  I'm not sure I'd worry about the plane crashes - it is listed as beta software

• WARNING: Beware of Trusteer report installation on macOS Sierra

  Just a word of warning to users who have the version for macOS Sierra - I'd be suspicious about installing and using Trusteer report of IBM software as it doesn't seem to work correctly with Safari 10. Although maybe it's not the case for all devices running Safari 10, it certainly caused problems on my Mac and someone else on this thread:

  Safari 10 high CPU usage

  High CPU usage (and therefore high battery drain) is the main problem I've experienced with that. If you have already installed report, maybe try using Safari and check Activity Monitor CPU usage to see if this problem is widespread or limited to certain devices (mine included).

  Report was constantly beset with problems on my Mac - in OS X El Capitan icon appears in Safari 9.1.3; in the public beta of macOS Sierra the installer kept crashing and causing my Mac restart unexpectedly. and now high CPU utilization when you use Safari 10.

  Everyone encountered problems with the report? For now, I don't particularly want to reinstall the software, despite its security perks - headaches constant software involves dissuaded me to use it for the moment.

  I agree whether Trusteer report on a Mac installing problems.

• macOS Sierra will not be closed if the trackpad and keyboard wireless is connected

  Hi, after switching to macOS Sierra, the first time that I stop my MacBook Pro, it is stuck on the dark screen with the spinning ball. I had to force him to stop by the power button. The next same thing occurs. After looking in the console log, I noticed something related to bluetooth and I discovered that my wireless keyboard and trackpad are both connected (usually, I work with my MacBook Pro on a stand and I use the wireless keyboard and the trackpad). I unplugged the bluetooth and Mac went off smoothly. Did someone else experienced this problem? And does anyone have and idea about it? With El Capitan I could turn off the mac no matter what was connected...

  Thank you.

  GIO

  I try to remove the two devices in preferences Bluetooth, then re - match.

  I use them with a MacBook Pro, but I use Trackpad and keyboard with a Mini and not have not had any problems.

• MacOS Sierra could not download

  I tried more than a dozen times, download the installation program from the App Store for macOS Sierra.  It fails every time with a message that "sierra macos download failed. Use the shopping page to try again "."  The download speeds are very good, and in 20 minutes, it will exactly Download 4.23 4.77 GB.  Then it will stall at 4.23 GB and indicate 'calculate '.  Stalls at 4.23 GB every time.  I have a lot of space (+ 134 GB), uses the latest version of El Capitan on mid 2010 macbook pro, 8 GB of memory.  Ideas for this problem?

  I added the Debug menu to the appstore and tried to reset the application as people wrote.  Nothing seems to work.

  Along with your MacOS download, try to download any free app at the same time before dropping out.

• macOS Sierra does not support some MIDI controllers

  Because I downloaded the new macOS sierra, my midi keyboard no longer works. The midi controller is no longer recognized by Logic Pro X.

  Thanks in advance!

  But it is recognized by the computer, Garageband sees the keyboard?

  Go to utilities/Audio-MIDI settings...

  With the keyboard plugged in, look on the MIDI tab, everything is listed.

  After update for Sierra have you disconnected the keyboard, stop and restart the computer, allow to settle and then reconnect the keyboard.

• Windows xp help does not start - unmountable boot volume and recovery console work ethier

  Original title: windows xp help does not start and the recovery console will not work ethier

  the symptoms are used to my windows XP boot it says unmountable boot volume, so I tried to fix it via the recovery console as everyone says but every time I enter fixboot for one of my drives hard /i have 3 I think / it won't work and says unidentified boss so I create another boot and exit area and it does not work so I go back and try fixboot again and it says unknown again after the creation of we know. Same mistakes for chkdsk /r and /p never tried / f but I'm guessing that it won't work ethier. It's like my recovery console won't save the changes it brings to all of my discs hard does anyone have an answer to this

  Hello
  • Will there be any changes made before the show?
  • Did you try to start in safe mode?
   
  You can check these links:
   
  Unmountable Boot Volume
  http://support.Microsoft.com/kb/555302
   
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545
   
  If above does not work, I would say to contact the manufacturer of your computer.
   

• some characters on the keyboard does not not after installation of macos sierra

  keys on one side does not not after installing sierra on my mac pro book

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  Also the keys do not work in recovery mode?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Installation of macOS Sierra results in the error message "load installer has no signature verification.

  I tried to do a clean install of Sierra several times and each time Setup reaches the end and then displays the message "the responsibility of the installer has no signature verification. This leaves the computer without a bootable Mac OS version.

  I tried to recreate the USB key with a new download installer.

  The first Apple support guy that I talked to said to make a recovery of the internet. The problem here is tries to install El Capitan, but never finished. The countdown reaches 0, then goes up to about 30 minutes back. It just keeps doing hours and hours.

  The second Apple support guy that I talked to said to do a regular restore (CMD + R), but it always goes to the recovery of the internet. I'm guessing that there is no restore partition.

  The computer has 10 Windows installed on a Bootcamp partition, and that seems to work very well. I can't installed macOS.

  The computer is a mid-2015 15 "MacBook Pro. I use the disk utility installation program to format the Macintosh HD partition. I used the El Capitan terminal Installer set the hour correct system. I tried to install using another USB port.

  I would appreciate help.

  Video of the problem of recovery of El Capitan Internet: https://www.youtube.com/watch?v=H5a4uUq_C3o

  Screenshot of Sierra install question: http://imgur.com/k79us9q/

  Access the item in window Menu at the top of the screen. Select the Setup log. This should give you an idea of why it's a failure.

• Lightroom CC 2015.7 / Camera Raw 9.7 / macOS Sierra - could not find the Destination folder during import

  Hello world

  Sorry if this question is stupid, but I always imported files easily on my hard drive. But recently, since I've updated my Lightroom, I can't find the menu destination folder when importing photos.

  I go in the menu library, choose IMPORT, select the original folder, the photos I want to import and then, on the right side, I only see the option 'create an intelligent Preview' and the option of keywords/tags. Where is the part that I could choose the destination folder - and even create subfolders?

  If I click on the triangle in the lower left corner to minimize the menu, I can see the menu "create a subfolder. However, the normal display mode brings no option like that, but by selecting the main folder by clicking on the icon in the corner right-towards the top.

  What Miss me? It seems not very practical for me.

  Cheers in advance!

  The destination tab may have accidentally become hidden, next to one of the other header in the sidebar right and you click right there get a pop up that will allow you to restore it. See the screen capture.

  

• Adobe CS5.5 Web Premium installs on MacOS Sierra

  So I recently bought a new MacBook Pro. On my old Mac I bought Adobe CS5.5 Web Premium. I wish that this suite on my new Mac but it doesn't have an optical drive, so I thought I would download it from here https://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html. After downloading the file, I clicked on install.app and comes to the following:

  

  What I am doing wrong? Is there a different place, I can go download the dmg?

  Thank you

  I thought about it, here is the solution:

  Right-click on the application and go to "Show Package Contents".

  Search for "Contents/MacOS" and open that folder in the Terminal

  In terminal run: sudo. / Install

• Not possible to boot from the CD after installing Win XP on Tecra A3

  Hi all

  I can't boot from the CD more? I tried following things:
  -J' used several CDs to boot from, such as Windows XP, other CD CD WinXP or UBCD (ultimate Boot CD) and others to boot from.
  -J' chose in the start menu and the Bios first, the CD player must be started from.
  -Disabled the HARD, the LAN and the FDD drive so that only the CD must be started from, nothing else.
  -Press F12 after start-up und selected CD to boot from.
  -removed the battery
  -removed the disk drive HARD that the CD is only peripheral to start.
  -No available recovery disk.
  * Result: Always at top left corner a cursor flashing on a black ecran.*

  My story to this problem/question.
  -J' reinstalled Windows XP after the system became slow, with SP2 and SP3.
  -During the installation of SP3 and at the same time other pilot the system crashed.
  -Pressing F8 after starting, I can choose the Options to win.
  -System running days, several days without any reaction.
  -Sometimes, it goes into "secure mode" and freezes, no entry or possible reaction.

  I want to install Windows XP again from the CD and a clean version to work on.
  That means no two were leaving to work on alone.

  Can someone tell me why the CD player is with any media ignored inside and no departure from them is possible?

  Thanks for your help

  A strange question what s
  I put t know, but you did an update of the BIOS? Try it!

  Moreover, what laptop Tecra A do you have?

• UN-update not possible to boot

  I stupidly allowed MS to upgrade my system.  After 92 updates, he forced a reboot that failed completely.  I got the normal safe mode, Windows, everything is hundy dory options, but none of them work.  Like a wanker, I re-installed XP Pro from my (SP3) CD and now I is even more a possible restoration.

  If someone has suffered this explosion of bomb cluster munitions, or am I just lucky?

  Let's cut to the Chase. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that give repair install (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before connecting a flash drive, card SD or any other external disk to the computer:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/xprepair/threads

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• It is not possible to boot from the CD bootable on Satellite S5200-902

  Hello

  I have a Satellite S5200-902 and it was really good to use for me actually... Once I received a system error message and might start Windows more. Anyway... I tried to reinstall the OS, but I can't boot from the recovery CD. The CD is ok because I tried it on my other computer. I press F12 for the boot menu option it shows these items as HARD - disk drive - CD drive.

  I choose CD and nothing happens. He always tries to start from the HARD drive. I installed the Windows on the HD satellite on my other computer and it worked very well. He has installed the system but if I put the HD Toshiba Satellite does not start windows. It blocks the laptop.

  BIOS version is 1.30 and I don't know how to install and update the bios 1.8 or something on it, because I don't know how to install it without windows. I now have no idea how to go ahead?

  Can anyone here help me out please because I have no idea?
  Please someone help me ASAP because I need the laptop for work.
  Thank you

  Best regards.

  Hello

  It would be very interesting to know if you can boot from another CD, for example from the original CD of Microsoft.
  It s interesting because I would like to know if the drive of the laptop accept another CD.
  In my opinion, there is something wrong with the internal drive and so the laptop can not boot from the recovery CD.