Installation of Microsoft updates

Similar Questions

• Windows Vista won't start after installation of microsoft updates

  I just install microsoft updates, then the computer is turned off and it does not load windows.  A box appears that says
  Microsoft Visual C ++ Runtime Library.
  This application has requested the execution to terminate in an unusual way.  For more information, contact the application support team.

  The options are to click OK or close the box.  I tried both and it just keeps popping up the same box as above.

  Hi Mas_007,

  Welcome to Microsoft Vista answers Forum!

  I have a few here that might solve the problem.

  A.) Firstly, I suggest that you start the computer in safe mode and check if you are able to boot without any problems, safe mode starts Windows with a limited set of files and drivers. Startup programs do not run in safe mode, and only the basic drivers needed to start Windows are installed that, follow these steps to start the computer in safe mode with networking:

  To restart the computer using safe mode, restart the computer and press the F8 key for about four to five times. Appears in safe mode listed in the advanced options of Windows. Select Safe Mode, and then press ENTER.

  (B) I suggest that you perform a clean boot on your computer, to help troubleshoot error messages and other issues; You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article http://support.microsoft.com/kb/929135.

  (C.) I suggest that you perform a scan of the file system [SFC] checker on the computer, the scan replaces the failed system of files with the original files from version of Windows on the computer system, follow the steps below to perform a scan:

  I suggest to empty the temp folder and later, follow these steps:

  i. Click Start > type % temp % in the start search box > press on enter > delete everything present in the temp folder.

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command calls, the following line and press ENTER: sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Additional information: http://support.microsoft.com/kb/936212

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After installation of Microsoft update my computer automatically starts playing music ads

  I recently installed the update from microsoft.  Now my computer starts automatically play music, movies, ect.  When it happens I have look in the start box and nothing is running.  How can I remove this?

  Take a look on this site for information hard.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• Cannot access the Microsoft Update Site

  I get the following error message when you try to access the update site:

  Microsoft Update could not be installed on your computer
  

  Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.

  More troubleshooting options

  • If your computer is connected to a network and the problem persists, contact your system administrator to see if your Microsoft Update settings are managed by using Group Policy.
  • If your computer is not connected to a network, or if your system administrator has not disabled Microsoft Update, check if the Windows Update service is disabled or stopped. For information about how to start a service, search help and Support on your computer.

  Note: If you encounter problems with the installation of Microsoft Update, you can continue to get updates for your computer by going to Windows Update in control Panel.

  [Error number: 0x800A01AE]

  I AM logged on as administrator (it's actually the only account on the system other than the guest account: I have renamed the main administrator account and use it as my account {I know this isn't the best practice, but I always did like it and it makes things easier being the administrator, especially since I changed the name for security reasons}).  I have a small home network wireless, but have no defined group policy (no server - just-to-peer).  The Windows Update Service is launched and running (but I stopped and restarted it just to be safe).

  I don't quite know what to do next.  I would like to be able to access this site for updates that cancelled or failed during the update process automatic (and who seem not to be re - that appear as options when I check the updates).

  Any help you can give would be greatly appreciated...

  BTW, I use a Dell Inspiron E1705 with 32-bit Windows Vista Business SP2.

  Thank you!
  Lorien - a - MCSE/MCSA/network + / A +.

  Hello

  You try to go actually on here Windows Updates site?

  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  This site does not work for Vista. You must use the Windows built-in to Vista updates or download them
  sites I posted for you last time.

  Absolutely do not use the default Administrator account. Just make a new Admin account to
  use and leave the other to test and difficulty. In fact, make an Admin NOW account to use to test and fix
  According to the needs. If your sole administrator corrupts you will have a big headache.

  -------------------------------------

  Run the Windows updates to reset and

  Do the two of them:

  How to reset the Windows Update components? a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  ------------------------------------

  If you have issues with your updates, please describe what you see and all the error codes or the KB/QB
  problem updates.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I activate the microsoft update service?

  I need to get the update from Microsoft for other products.  I already have Windows Update, but also need Microsoft Update.  Error message says:

  Microsoft Update could not be installed on your computer
  Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.
  More troubleshooting options

  • If your computer is connected to a network and the problem persists, contact your system administrator to see if your Microsoft Update settings are managed by using Group Policy.
  • If your computer is not connected to a network, or if your system administrator has not disabled Microsoft Update, check if the Windows Update service is disabled or stopped. For information about how to start a service, search help and Support on your computer. Microsoft Update could not be installed on your computer
    
    Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.
    Note: If you encounter problems with the installation of Microsoft Update, you can continue to get updates for your computer by going to Windows Update in control Panel.
  •  
  •  
  •  
  • 
    I do not understand the instructions above.  I have log on as an administrator.  Where exactly is the place to solve this problem?  Thanks a lot for helping me.

  Yes, Mr. Difficulté tried it 50202 and nothing worked.  I was looking forward to a solution, so I ended up doing a system restore complete with discs that I did when I had this computer.  Then I did an inplace upgrade.  Still so many problems.  After hours and hours, I finally got to meet up with a working computer.  Thanks for your help.  You know much more that I do all of this.

• Loss of FN - key after the installation of the updates from Microsoft on L500 security

  I am using a satellite L500-19U

  After the installation of Microsoft security updates the FN lost their function except the brightness keys + /-function.
  also the function keys that appear on the upper border of monitor by pressing the FN key appear after the security packages have been installed.
  I solved the problem by removing the update through the function of W7 (Wiederherstellungs punkt) back.

  The following security packages are selected to be installed:
  Update security for Windows 7 for x 64-based systems (KB978601)
  Update security for Windows 7 for x 64-based systems (KB979309)
  Update security for Windows 7 for x 64-based systems (KB979683)
  Update security for Windows 7 for x 64-based systems (KB980232)
  Update security for Windows 7 for x 64-based systems (KB981332)
  Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool)

  Which of them are unsuspicios, which must be postponed, the updates are necessary after installation, updates?

  Post edited by: JoJo58

  Hello

  If you read about these update on the Microsoft website: (not of them should affect the FN keys)

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=998164b7-4B8C-468B-8d39-f242633c8838

  I checked the history of updates on my computer and all of them are installed with the exception of Windows MRT x 64-April 2010 (KB890830) (malicoius software removal tool). Everything works correctly, try to remove this update.

• Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Whenever my computer installs the Microsoft/Windows updates I get Internet and restoring the system to return.

  Cite your version of IE and the full version of Windows (for example, WinXP SP3;) Vista 64 - bit SP2; Win7 RC. Win7) during the validation in an IE specific forum or a newsgroup. Please do it in your next reply.

  By "The Internet began" do you mean that you encounter errors Page can not be displayed ?

  Updates have you installed just before this problem started? Have you installed an update of the third-party driver that is offered by Windows Update?

  TIP: Never, EVER to use system restore to 'Cancel' an update, Service Pack, or upgrade of IE!  Instead, uninstall the update, Service Pack, or the IE patch & reboot.  If that does not resolve the problem, then try System Restore. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Microsoft updates for Windows XP, Office 2007 - Installation Error Code: 0 x 80246008

  I try to install 21 updates from Microsoft Update security.  I get a window that says 'download and install '.  The list fills.  Immediately, I get a screen that says "some updates were not installed."  I tried several times over the last week.  I am running Windows XP and Windows 2007.  Any suggestions on how to overcome this problem are appreciated.  Thank you.

  Here are the updates will not install.

  Installation error error code: 0 x 80246008

  Update security for Windows XP (KB2862152)
  Update for the filter of junk e-mail in Outlook 2007 (KB2825642)
  Update of security suites for Microsoft Office 2007 (KB2760415)
  Update of security for Microsoft Office Outlook 2007 (KB2825644)
  Update security for Windows XP (KB2868626)
  Update security for Windows XP (KB2876331)
  A security update cumulative for the stop bits ActiveX for Windows XP (KB2900986)
  Update for the filter of junk e-mail in Outlook 2007 (KB2850085)
  Update security for Windows XP (KB2893294)
  Update security for Windows XP (KB2892075)
  Update security for Windows XP (KB2893984)
  Update of security suites for Microsoft Office 2007 (KB2817641)
  Update security for Windows XP (KB2898715)
  Update for Windows XP (KB2904266)
  Update of security suites for Microsoft Office 2007 (KB2850022)
  Update security for Windows XP (KB2914368)
  Update of security suites for Microsoft Office 2007 (KB2837615)
  Update of security for Microsoft Office Word 2007 (KB2837617)
  Windows malicious software removal tool - January 2014 (KB890830)
  Update security for Windows XP and Windows Server 2003 (KB2917500)

  I try to install 21 updates from Microsoft Update security.  I get a window that says 'download and install '.  The list fills.  Immediately, I get a screen that says "some updates were not installed."  I tried several times over the last week.  I am running Windows XP and Windows 2007.  Any suggestions on how to overcome this problem are appreciated.  Thank you.

  Here are the updates will not install.

  Installation error error code: 0 x 80246008

  Please see this thread marked as answer that describes a problem similar to yours:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-XP-update-doesn

• Windows 0 x 643 error code... regarding the installation of Microsoft Windows Update

  Get rror Code 0 x 643... regarding the installation of Microsoft Windows Update ===>>> update of security for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2833941).  Have tried to install several times with the same result.  Please NOTE... that every time I go to Windows Update (& execution 'check available updates') than post results this update (security for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2833941)) however indicates that the update is already downloaded on my machine & requires ONLY being installed.  (personally, it is my belief that there could be a problem with the download... what causes the installation to fail... However NO way to re - download is available?  I tried to delete my temporary Internet files & Cache + ran disk cleanup... niether have removed the download of my machine.  Also checked 'Add Remove Programs'... just to see if it was listed there... and it wasn't!  So certainly, the update is NOT installed, I can NOT delete the download that is perhaps corrupt... and preventing me to replace it with a NEW copy.)   ANYONE GOT SUGGESTIONS?   Help, please!  All other updates are installed on the machine... other than this one, & I'm off clues as to what to try next.   Thank you!

  information system: Microsoft Windows XP

  Media Center Edition

  Version 2002

  Service Pack 3 (w / all available updates installed) EXCEPT this one!

  HP Pavilion Notebook dv6120us

  Intel Core 2 CPU

  T7200 @ 2.00GHz

  2.00 GHz, 1.99 GB of Ram

  Internet Explorer Version: 8.0.6001.18702

  Build: 86001

  Uninstall the .NET Framework 1.1. Then download the .NET Framework Cleanup Tool
  In the drop-down list box, select 1.1 and clean.
  Reinstall .NET Framework 1.1
  Download and install. NET Framework 1.1 Service Pack 1
  Visit Windows Update or Microsoft Update and let it install the rest of the 1.1 updates, including KB2833941.

  Check if it is installed and report.

• Installation of Microsoft - other hardware - HID Non-User Input data filter (KB 911895) (updated 1 of 15)... failed!

  I can't download this updates?

  Download update of security suites for Microsoft Office 2007 (KB2596672) (updated 7-15)... done!

  Download update of security suites for Microsoft Office 2007 (KB2597162) (update 8 of 15)... done!

  Download a security update for Microsoft Office Word 2007 (KB2596917) (Update 9 of 15)... done!

  Download a security update for Microsoft Office Excel 2007 (KB2597161) (updated 10 15)... done!

  Download a security update for Microsoft Silverlight (KB2636927) (11-15 updated)... done!

  Download update for filter junk e-mail in Microsoft Office Outlook 2007 (KB2687310) (updated 12 of 15)... done!

  Download update for Microsoft Office Outlook 2007 (KB2596598) (updated 13 of 15)... done!

  Download a security update for Microsoft Office InfoPath 2007 (KB2596786) (updated 14 15)... done!

  Download update of security suites for Microsoft Office 2007 (KB2596744) (update 15 of 15)... done!

  Initializing installation... done!

  Installation of Microsoft - other hardware - HID Non-User Input data filter (KB 911895) (updated 1 of 15)... failed!

  Install the update of security suites for Microsoft Office 2007 (KB2596871) (update 2 of 15)... failed!

  Install the update of security suites for Microsoft Office 2007 (KB2598041) (update 3 of 15)... failed!

  Install the update of security suites for Microsoft Office 2007 (KB2596880) (update 4 of 15)... failed!

  Install the update of security suites for Microsoft Office 2007 (KB2597969) (update 5 of 15)... failed!

  Install the update of security suites for Microsoft Office 2007 (KB2596792) (update 6 of 15)... failed!

  Installation of update of security suites for Microsoft Office 2007 (KB2596672) (updated 7 of 15)...

  They all failed

  -Other hardware - Microsoft HID Non-User Input data filter (KB 911895)

  Update of security suites for Microsoft Office 2007 (KB2596871)

  Update of security suites for Microsoft Office 2007 (KB2598041)

  Update of security suites for Microsoft Office 2007 (KB2596880)

  Update of security suites for Microsoft Office 2007 (KB2597969)

  Update of security suites for Microsoft Office 2007 (KB2596792)

  Update of security suites for Microsoft Office 2007 (KB2596672)

  Update of security suites for Microsoft Office 2007 (KB2597162)

  Update of security for Microsoft Office Word 2007 (KB2596917)

  Update of security for Microsoft Office Excel 2007 (KB2597161)

  Update for the filter of junk e-mail in Outlook 2007 (KB2687310)

  Update for Microsoft Office Outlook 2007 (KB2596598)

  Update of security for Microsoft Office InfoPath 2007 (KB2596786)

  Update of security suites for Microsoft Office 2007 (KB2596744)

  Thank you

  Tip: Get a driver updates you really need from the download page of the manufacturer of the device or the computer only, NEVER through Windows Update (i.e., hide the driver updates available through Windows Update).

  ACTIONS

  1. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  1B. IMPORTANT!-online make disappear/close theTroubleshooting Windows Update tool ""pop up! "   " -then...

  1 c. ignoring "not recommended" or similar warnings, difficulty running it 50202 DEFAULT modes and AGGRESSIVE. [1]

  2 reset.

  3. open Internet Explorer (only!) at http://windowsupdate.microsoft.com . Select CUSTOM and scan | Installation of Security updates (e.g., KB2596871;) KB2597162) available now.

  -Online if an update root certificates (KB931125) is listed under the category of updates software optional on the left side of the window of scan results, install it to enjoy greater security of IE8.

  -Online also install the junk e-mail Filter Outlook update (KB2687310) as well as Update for Windows XP (KB971029) if it is offered.

  -Online Tip: do NOT install any other optional software updates or upgrades optional equipment (e.g., KB911895) - just hide them ("don't show me this update") all.

  4. in response to this post with a status report.

• Installation of Microsoft - KB2572073, KB2633880 and KB2518864 security updates offered repeatedly to install

  Several times today (at least 7) my system asked that I install Microsoft Update for my computer (KB2572073, KB2633880 and KB2518864).  I get no error message on the installation.  But every time it's the same three updates.  Any suggestions what mich was happening and how can I fix?  Thank you

  This is a bug of Windows Updates.

  See the ahaap post in this thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/repeated-installation-of-update-kb63380/8b0e14ce-43dc-45b7-948d-3758054a1784 I followed his suggestion and all is good...

  Kind regards...

• Why a shortcut for Microsoft Update doesn't appear in the start menu as it always has in previous installations?

  In this latest new installation of Windows XP Pro when I upgraded from Windows Update, Microsoft Update no item does appear in the start menu in previous installations? Can I remove Microsoft Update and then reinstall it? Can I manually install the shortcut? I'm comfortable editing the registry.

  Off topic, I know, but you can work some magic for another problem. When I boot, when half of the icons appear in the notification area, I get a message that Windows Firewall is disabled. After the last icons appear, the message disappears and the firewall turns on again. It's annoying, and I'd love to [repair]. Thank you.

  Assuming that the message "the Windows Firewall is disabled" comes from the Security Center (Windows), looks like you see what we call a "race condition". Essentially, Security Center is loading before the Windows Firewall was fully charged (may be due to the amount of NAV system resources then uses what he loads and runs his own control over the firewall).

  Until the warning goes away in a few minutes, don't worry, you see a normal behavior (for Windows XP).

• KB2305420 consistently fails in Microsoft update. The download fails. Direct installation, error code 80070020

  Have recently reinstalled Vista on a Vostro 1500 using the image of the Dell system.

  Service pack 1 and 2 is installed.

  A security update that kb2305430 fails to download. Fix, that he is unable to solve.

  Analysis of Ran tool.

  Reset windows update components.

  KB2305420 downloaded for visits from the download site (different size than that offered by automatic downloads)

  Downloaded but the installation failed.

  Installation was tried with anti-virus software stopped.

  I tried clean install - all services package shuts down.

  Using Vista Home premium.

  Hello

  Thank you for your response.

  I suggest you try the steps mentioned below and check if it helps.

  Windows Update, Error 80070020: http://windows.microsoft.com/is-IS/windows-vista/Windows-Update-error-80070020

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install updates: http://support.microsoft.com/kb/883825

  Hope this information is useful.

• After uninstalling printer Windows Installer and Microsoft Office error "this update package not could be opened"

  Original title: Windows Installer and Microsoft Office problems after you have uninstalled the printer

  I tried to install more than one printer, a HP Photosmart C4280 by downloading the drivers and updates on the HP site. I uninstalled the printer after it failed to scan a document and I had no more use for it. Then the trouble started. When I tried to open some programs (iTunes, Skype, etc.) for the first time after the uninstall of the printer, a window "Windows Installer" popped up. After you have configured Windows Installer, the program would open normally. However, when I try to open any Microsoft Office programs (Word, Excel, etc.), Windows Installer appears, but it turns into a window that reads:
  "This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package. »

  Microsoft Office programs are open at all, and I desperately need my programs of Microsoft Office to work even faster. I would appreciate it if Windows Installer will stop trying to configure when I open a program also. Can someone help me please?

  Hi Jennifer7,

  It is sufficient to indicate the complete error message you receive.

  Method 1: To solve the problem of Windows Installer, follow the steps

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2: Follow the steps mentioned in the article below which addresses Office question

  You receive an error message when you try to install or run an Office program: "this patch package could not be opened" or "" the installation source for the product is not available".

  http://support.Microsoft.com/kb/932857

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If the question of the Office has not changed, you can post your request in the Office forums for more specialized help.

  Office forums

  http://answers.Microsoft.com/en-us/Office/Forum/office_install?page=1

• Updated the installation of Microsoft Security Essentials error 0 x 80070003

  original title: Windows Update problem

  I can't update Microsoft Security Essentials since I installed pro SpeedyPC. Get error 0 x 80070003.

  SpeedyPC reputation on WOT (Web Of Trust)

  http://www.MyWOT.com/en/scorecard/www.SpeedyPC.com>

  Avoid like the plague the Speedy PC Pro

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

  http://support.Microsoft.com/kb/910336

  Delete the contents of the DataStore folder

  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  UTC/GMT is 20:19 Monday, May 21, 2012