Installation of operating system after the new motherboard

Similar Questions

• I'll be able to use the Windows 7 operating system on my new motherboard with the same hard drive?

  I have a card mother broken dell and I wonder if I change for a card mother Msi or Asus, but I always use the same hard drive that have my bones inside. I'll be able to use the operating system on my new motherboard?

  Original title: Windows 7

  No, you will not be able to.

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• If I buy windows 8 (any OS windows) now and install in my computer and after a year when I change my computer, can I install the SAME operating system in the new computer?

  If I buy windows 8 (any OS windows) now and install in my computer and after a year when I change my computer, can I install the SAME operating system in the new computer?

  You can if you buy a commercial box full of Windows 8 version.

  If you buy a computer with Windows preinstalled, or a version OEM of Windows 8, 8 No, you can't.

  If you buy a version upgrade, you can, as long as the new computer has a licensed version earlier of Windows on them.

• I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP.

  Original title: someone help please?

  Working on my old computer, a pentium 4, card mother GA81PE1000, I continued to have this message flashing on the screen "ERROR of LOADING of THE OPERATING SYSTEM" after the restart when loading the software Window XP. After so many years, working on the construction of computer & repair, it's new to me.

  So I checked the Microsoft Website for answers from people with the same problem in the past and apply their suggestions, nothing works... hard drive replaced, the changed value in the bios, did everything possible, still nothing works, phenomenal for me, please help me find an answer, thank you?

  Hello

  1. have you made changes on the computer before this problem?
  2 - what you want to say that you receive this error message during the installation of Windows XP?

  Check to see if the following is useful.

  Method 1: Disconnect all devices non-essential connected to the computer and restart. Check to see if it boots normally.

  Method 2: You may need to check the settings of the BIOS (Basic Input\Output System). Check if the hard drive is detected. If this is not the case, check the physical connections. Refer to the manual to check the same.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  The following article might be useful: "Error loading operating system" Error Message When you restart your computer during installation

• I changed the hard drive, how do I put on an operating system on the new hard drive

  I changed the hard drive, how do I put on an operating system on the new hard drive

  Restart with the keys Option and command R keys. If this keyboard shortcut does nothing on your Mac, use a compatible Mac OS X installation DVD.

  Follow the prompts on the screen.

  (142198)

• Will I need to re - install Win 7 after the new motherboard

  I have a 'new' machine unfortunately screwed up. (It is refurbished, but many questions).

  I probably get a new motherboard. The technology will be able to transfer the credentials to Win 7. I ask because on the Thinkcenter and my Y480 I reinstalled Win 7 NINE times and have now good things.

  Basically, I really want to start rebuilding this machine with a lot of software, but if I have to reinstall after the new motherboard Tuesday I could wait as well. :-(

  DRM for pointers.

  For anyone following the answer is NO (less if done by the engineer).

  I asked support if the engineer should be port on my serial number for the new Board of Directors (Windows now finds the system not on a sticker card serial numbers). I was told 'no '.

  Of course, the engineer DID. My data has been flashed to the new Commission and Windows never saw a difference.

  Another wasted a few hours back up things.

• Operating system and the new hard drive

  I have a question:

  I have a HP a4302f - with stock specifications:

  A computer virus has little or nothing to do with a hard disk crash. Please include the exact error messages and/or screens that remains stuck on the computer.

  A 500 GB hard drive at 7200 RPM SATAII should run around $ 45 to $ 70, and the operating system can range from $ 0 to $ 30 depending on exactly how handle you the situation.

  Is that what you had created your HP recovery disc set staff when you first set up your computer, you would be able to return the computer to a factory State even with a new hard drive. Since it does not appear that you have created these disks, you must buy a set of HP recovery disks or disk installation of operating system with COA and product key. None of these methods should work as expected and you will leave with an operating system on the new hard drive.

  You can order a set of discs of HP recovery directly from HP or third-party ComputerSurgeons.com. Purchase of a full blown Windows OS is not really necessary and you can actually download the Windows operating system to use with the key already on the side of your computer. For a hard drive, look at Frys.com Newegg.com, Amazon.com, etc.

  If you have any other questions, please post them here.

• Clean? Windows 7 restarting on formatted drive, 100 MB Partition not allowed no previous operating system, after the attack of virus, it reach the wifi drivers to not load or display in the new operating system?

  Left attack virus serious that some files disabled in windows 7 (protected by Microsoft Security Essential) a program used on the computer was left partially disabled and I continue when using wireless internet. Reformatted drive leaving 100 MB Partition intact, created in new OS was an old file of Windows not wanted, impossible any attempt at the value of the days of updates, downloads & allowing also noticed wifi. Another reader reformat leaving 100 MB partition again not affected since the original OS. All programs loaded & all updates succeeded, but still did not have through any discussion read to get the computer to WiFi wifi as in Starbucks invites you to discover. I have another operating system on the computer that is able to discover drive internet wifi from loading with windows 7 so not a hardware problem, I think. Question is can a formatted drive on the left with its original partition of 100 MB OS questions with new reloaded windows 7 and is the new installation of the operating system clearly & repopulate this partition of 100 MB for no bug cannot continue to corrupt and better performance? Thank you all.

  A new installation of windows 7 can be said to delete this partition. do you when you get to the section "where do you want to install windows?" in installing windows 7. There is a player options button that allows you to delete both partitions... then create 1 new partition for windows and it throws a message saying that the operating system can create additional partitions... blah blah... and she... that way the 100 MB partition is clear. MyPcHealth - free tools

• VM Wkstn issues after the new motherboard

  Hello

  I am a developer of software that uses VM Workstation to emulate client machines, servers, sharepoint etc to deploy code to and test it before you download. I use a Dell M6600 with ram of 16 gigs of the month running last win7

  Recently, the motherboard is out but I was able to access the HD and support everything including my VM. After replacing the motherboard the ATU. host OS win7 would not start. Tech., making mboard said I had to reinstall I did and everything works and GTG on the host again.

  I have installed VM wkstn 9 (what I used before) copied the VM to host and open. The first vm "resumed" without doubt as he ran to the death of mboard. The resume worked except that shortcuts etc. would not not open and what I tried to do has crashed. So I thought that a reboot may be in order.

  Well, after it reboot charges but he "APPEARS" I don't have any video as the screen is empty except the mouse you can move very well.

  If you start in safe mode you get video but everything (characters) is garbled code as the squares, slashes, circles etc. I can connect because I have this pretty well memorized screen and get on the desktop... once again only in safe mode.

  I am assuming that the new motherboard really threw the VM for a loop. I don't mind creating a new virtual machine and migration but I was hoping that there might be something I could do to my old to do a little more functional otherwise migration is going to be very difficult.

  TIA

  JB

  Here's so what finally fixed it. I copied the VM backup source again. Remove the vmem & VMS files suspense. Then, I unplugged all available hardware devices. Machine turned on and everything worked perfectly. I then added hardware devices back and all is good.

• Missing operating system after the installation of Linux Mint

  Hello

  I'm running OS X 10.11.3 El Capitan and disabled SIP for install Windows 10 on it. Everything worked fine... Then I installed Linux Mint. OS X and Linux Mint boot boot well but when Windows thanks to find, the error that is shown is the lack of operating system.

  Browsed the forums a bit and I know that lonely t can certainly help me!

  Here is my result

  ➜ ~ diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 124.9 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Linux Filesystem 24.3 GB disk0s4

  5: Microsoft database BOOTCAMP 250,0 GB disk0s5

  6: Linux Swap 8.0 GB disk0s6

  ➜ ~ sudo TPG - v - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 244041120 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  244450760 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  245720296 792

  245721088 47460352 4 part TPG - 0FC63DAF-8483-4772-8E79-3D69D8477DE4

  293181440 15624192 6 part TPG - 0657FD6D-A4AB-43C4-84E5-0933C84B4F4F

  308805632 179687424

  488493056 488280064 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  ➜ ~ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 1 - 1023 254 63 [1-409639]

  2: AF 25 127 15 - 1023 254 63 [409640-244041120] HFS +.

  3: 1023 254 63 AF-1023 254 63 [244450760-1269536] HFS +.

  * 4:83 1023 254 63 - 1023 254 63 [245721088-47460352] Linux files *.

  1. in what year/model is your Mac?

  2. your MBR has no entry of Bootcamp.

  3. There is a big gap space between GPT5 and 6. Is - this intentional?

  4 Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

• After the new motherboard and processor installation Windows requires key, key to the sticker will not validate.

  I installed a new motherboard and processor to my PC and now it's me demanding in the news two days to activate windows. I type the product key that is located on the sticker and it refuses to validate. Assistance is needed.

  The key on the sticker code is assigned to the brand of the computer to which it is applied. Regardless of the brand, changed the m/b and the CPU (unless provided by the original manufacturer is a NEW computer.)

  If the advice of George do not work, you will need to purchase Windows 7 new...

• Portege R600 - 13 X - how to reinstall the operating system on the new HARD drive?

  Hello

  I inherited a Portege R600 - 13 X of my colleague, who hit and killed the hard drive. I installed a new hard drive, but you don't have operating system installation diskettes as he said that the computer has not come with any. To make things even more difficult, I believe that the optical drive may not work. My old R500 had a dead optical drive and after I replaced it (he has not yet worked) I was told it is perhaps something to do with the ribbon cable, which piggy back off the coast of the SD card reader, then to the motherboard.

  Anyway, is it possible for me to install Win 7 Professional (I have the original windows key) from a USB flash drive? Or y at - it a specific OS recovery/reinstallation disk that I can download Toshiba?

  Any advice would be very welcome
  Thank you
  NJ

  I have a Portege R600, and he has been a formidable workaholic, although now showing its age with newer software.

  I think these machines came with pre-installed Vista and your friend must have created a set of recovery discs when they got off the machine.

  Toshiba did release a drive to upgrade when Windows 7 is released which was available to the buyer within the free upgrade period you. You may be able to find a disk, but you will need the Win7 license to go with it.

  If not, your only option is likely to be to buy a disk and license. Of course, you can find the specific Toshiba drivers are missing. If you think about it, it's extremely unlikely that you will be able to locate what is essentially a free Windows 7 download install disc.

  Without an optical drive, you need to use an external USB drive and the BIOS to boot from that first force.

  I hope that you have succeeded.

  Andrew

• Want to m6-k088ca: m6-k088ca tea spilled want fried HARD drive. try to load the operating system on the new drive HARD get no found boot device

  Hi I want to m6 - k088ca it came with Windows 8, I've updated to 8.1 has a 64-bit operating system. I spilt tea on it and fried hard drive.

  Try to save money I bought a 500 GB hard drive instead of a 1 TB of HDD, it can with. Install it and then through the process to implement the recovery program and try to load the image of the system on my USB key. Recovery program did come and I tried to load the System Image to my USB disk hard nine, but nothing happened.

  I have only kept getting no device found startup message after the attempt to load of the System Image. Discover your forum, I discovered that I could not use the Image of the system on nothing less than what was originally on my computer a 1 TB hard drive. So, I went out and I tried to install Image system on it. I was unable to implement the recovery program I had before. I went to the boot options and he set up to boot from the key USB didn't keep get no boot device found message. After trying several different ways to do it, I made a test drive and kept getting unavailable message. I've reset the hard drive wiped clean all connections and was still unable to do a hard drive test, so I assumed that there was something wrong with the hard drive has returned to where I got it from. Then went to another bank and picked up another.

  First thing I did was a fast hard drive test and it happened.

  I tried to install e system on nw HDD image with no luck. I have never been able to implement the program of recovery since that first time. With the help of your forum, that I have que j' ai tente tried to load my picture of the system a couple of different ways but get no found boot device message.

  Have I may have something to corrupt the system on my USB key Image trying to download it on a smaller hard disk?

  I went to the view of Windows and try to download Windows 8 on an another USB and then tried to download it and continue to spread the message no boot device found. I tried this download on my g6 HP Pavilion with Windows 7 64 bit operating system. This is why it did not work because I use a computer with Windows 7 and not Windows 8?

  Thanks Bill

  Hello:

  See if you make your own plain W8 x 64 installation media works for you...

  Download the ISO W8...

  https://docs.Google.com/file/d/0B0W9PBigPy94aVJWSndyTFNFMzg/edit?PLI=1

  Then use this tool to make the file iso bootable on a 4 GB + DVD or USB flash drive

  http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

  If you install via a DVD, you must go into the BIOS, turn on legacy mode and disable secure boot.

• Installation of operating system on a new hard drive

  My compact presario v4832ea hard drive just died yesterday. It's a Toshiba MK8025GAS - 80 GB Ultra ATA/100 EIDE hard drive - 5 400 rpm, 2.5 inches of width, height 9.5 mm. Now I think to upgrade to a bigger, but I don't know if I'll be able to use the installation CD of Windows Xp with a hard drive to a different size. I am fearing a message in the sense of "can not install operating system. Incorrect hard drive size.

  You never know...

  capintxu

  Hello

  lol capintxu

  don't worry... just buy new HARD drive... XP would work fine...

  You can install XP on 1000 GB HARD drive also. xD

  Kind regards

  EverWin

• Operating system on the new hard drive recovery

  Hello

  The hard drive of my Satellite 1900 303 hangs almost (SMART), and the warranty has expired.
  Can I put a new hard drive in it and use the old recovery DVDs to put Windows XP on it? (I suspect it works only on the original hard drive)

  Thanks in advance,
  Randy

  Hi Randy

  You can do it. Features of the different operating system Toshiba tools don t depend on HARD drive.

  Change the HARD drive and install the OS using the Toshiba Recovery CD. This will work. If you have any problems please write again.

  Good luck!