installation of operating systems

Similar Questions

• Qosmio F30-114 - a problem with the installation of operating system

  Hi all
  I have a problem during the installation of operating system from the recovery disk (Win XP Media Center Edition).
  After loading the disc, I seen the installer welcome window, set up all the parameters in it and pressed the OK button.
  After that, an error has occurred (in a black console window):

  Check the type of partition MBR
  Not FOUND: Partition ID 4 is 0x00 not 0 x 88
  Seeking the TMBR
  No found TMBR!
  Fact.

  Microsoft DiskPart version 5.2.3790.1830
  Copyright (C) 1999-2001 Microsoft Corporation.
  On computer: MININT-JVC

  Disk 0 is now the selected disk.

  Services of disk management cannot complete the operation.
  Specified drive does not exist.
  ERROR: E:\04629R01 Reco-unpacking. TPA has failed!
  Press a key to continue...

  After reading this message and pressing a computer key restarts and that's all that happens.
  Also I can not install another OS (Win 7 for example), during the last part of an installation, I get a message "the work cannot be completed.".

  That's happened? I don't understand what is the reason for this problem. I was reinstall another OS (the drive recovery too) often earlier and everything was OK.

  You can install WXP using the Microsoft installation disc?
  Set the BIOS on the settings by default and to use the recovery disk again.

• Installation of operating system on hard disc

  Hi guess so I bought a new hard drive because mine went wrong.  Me being perhaps a little blond, I realized that I needed to re-download my operating system (I have the disks) then when I go to run it... takes me to the black screen and it says that your cd/dvd during this start-up cycle drive is f: a virtual disk drive is available for this round of startup as C : it contains several tools to drive seteup hard please use these tools only under the direction of Dell support staff.   F:\ > someone at - he signs... I called dell and of course my warranty has increased in March while they wanted me to pay $129... but this is an operating system so it would be through microsoft?  Let me know what you think

  Hi guess so I bought a new hard drive because mine went wrong.  Me being perhaps a little blond, I realized that I needed to re-download my operating system (I have the disks) then when I go to run it... takes me to the black screen and it says that your cd/dvd during this start-up cycle drive is f: a virtual disk drive is available for this round of startup as C : it contains several tools to drive seteup hard please use these tools only under the direction of Dell support staff.   F:\ > someone at - he signs... I called dell and of course my warranty has increased in March while they wanted me to pay $129... but this is an operating system so it would be through microsoft?  Let me know what you think

  ===================================
  If you have a new hard drive and a copy of Vista...
  the following article is maybe worth a visit:

  Installation and reinstallation of Windows Vista
  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

• Installation of operating system problem

  I installed windows 8 via a usb port... After it was installed, it took too much time then I restarted the system... But after that, nothing has worked... First, he showed that no operating system has been found... Then you are prompted to restart the system and reinstall windows... And it kept saying... If I remove the USB he invites me to restart and nothing else works... pressing f10 or shift + f10 is not even open the prompt... and if I insert the usb key I get the BOOTMGR missing... Press ctrl + alt + delete to restart... I tried evrything... f2, f12, f8 or f6... nothing happened... How to fix this... I can't even not the bios or Setup... even to the registry editor...

  Power the system down, it turns the power off and wait 10 to 20 minutes.

  Plug it in again after 20 minutes and start the thumb drive and make a custom installation:

  Boot from the Windows 8 USB key
  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Installation of operating system on a new hard drive

  My compact presario v4832ea hard drive just died yesterday. It's a Toshiba MK8025GAS - 80 GB Ultra ATA/100 EIDE hard drive - 5 400 rpm, 2.5 inches of width, height 9.5 mm. Now I think to upgrade to a bigger, but I don't know if I'll be able to use the installation CD of Windows Xp with a hard drive to a different size. I am fearing a message in the sense of "can not install operating system. Incorrect hard drive size.

  You never know...

  capintxu

  Hello

  lol capintxu

  don't worry... just buy new HARD drive... XP would work fine...

  You can install XP on 1000 GB HARD drive also. xD

  Kind regards

  EverWin

• Start of message network AMD during installation of operating system prompted

  Hello

  I am trying to install a guest operating system in Vmware Workstation with an ISO of Windows XP SP3, I got MSDN subscriptions.

  Configure the virtual machine using the new Machine virtual Wizard of VMWare Workstation (I choose the option "Typical") and "install the operating system later. After the initial installation, I point the device CD/DVD virtual machine for the ISO of Windows XP SP3 file on my hard drive.

  My Version of VMWare Workstation is: 7.1.0 build 261024

  Host operating system is: Windows 7 Ultimate

  Regarding the CD/DVD device:

  "Connect at power on" is already selected.

  Device type is: IDE 1:0 CD/DVD (IDE)

  I checked the file type of the ISO file I got from MSDN and it is indeed an ISO as shown below:

  en_windows_xp_service_pack_3_x86_cd_x14 - 60489.iso: # data filesystem ISO 9660 CD-ROM "GRTMUPD_EN".

  When I start the virtual machine, I press F2 and go into the BIOS. Change the boot order by moving the CD/DVD-ROM option to the top of the list in the boot order. Press F10 (to save changes to configuration of startup and exit). However, even after this, the VM tries to boot from the network boot device. I have attached the screenshot of the message that I get for the network boot.

  Why the VM starts not using ISO that I mentioned the Virtual Machine CD/DVD device to file?

  Please note that I don't have any physical device CD/DVD in my computer. However, I don't think that should have an impact on it because VMWare Workstation will virtualize for the Virtual Machine's CD/DVD-ROM material, even if the physical machine (host) does not have a CD/DVD ROM.

  I used the procedure above to correctly install the Windows XP SP3 guest OS in the past, but now, it doesn't seem to work. It seems that booting from CD/DVD-ROM does not work and it goes to the default startup network every time. Please help me solve this problem.

  Thank you.

  Hi NeonFlash,

  You probably have a disk that contains just to Service Pack 3, for the installation of the Service Pack on top of an existing instance of Windows XP.

  Search for download separately from Windows XP with Service Pack 3 on MSDN and download this one.

  See you soon,.

  --

  Darius

• Re: Satellite C855 - installation of operating system on new HARD drive

  Hello everyone

  My son c855 SATELLITE are collected next week for the replacement of the hard disk to be mounted under warranty; does anyone know if the Windows operating system installed on the new HD?

  Of course you can do it. I just hope that you have created a recovery media.
  If Yes this recovery disc to install the original recovery image on the new HARD drive.

• Installation of operating system on new HARD drive

  Is it possible to use the recovery CD to reinstall the operating system on a new drive or is the info stored on a partition on my original CD?

  Thank you

  Hello

  The use of the Toshiba Recovery CD will set the laptop back to the factory settings.
  The image of Toshiba which is placed on the restore CD contains all the drivers, tools, and utilities that were preinstall on the laptop.

  Don t worry. You can replace the HARD drive and then just boot from the recovery CD.
  This procedure will install the operating system and all the necessary applications and you will get the complete functional unit. ;)

• Installation of operating system on used Portege 2010

  I just bought a 2010 Portege opportunity, which took the hard drive wiped by the previous owner. How to install a new operating system (Windows 2000 Professional)?
  Can it be done with a card PCMCIA CD player and if so who? (I have a Toshiba no one of them, I can use it?)

  Hello

  The cable between the cd and the laptop must be a 16-bit cable, if you want to recovery. I'm not really sure if you can use different brands of

  See you soon

• Satellite A200 - restart Constant preventing re-installation of operating system

  OK so I was using my laptop (Satellite A200) and it restarted at random, so it kept rebooting at startup upward.
  So I decided to use a recovery disc.
  He won't through recovery disks without rebooting, so I don't even have a full operating system.
  If I open it in the BIOS, it does not restart, it will remain just work inside.

  What is the problem, software, hardware, and how much will it cost to get fixed because I don't think that there is something left I can do more.
  Any help would be appreciated.

  Thank you.

  Hello

  This whole story seems somewhat strange. I really don't understand what is wrong with that, but please try to follow:
  -Turn on your laptop and press F12 repeatedly to enter the boot options
  -Where the list of boot devices is provided recovery media in the optical disc drive
  -In the list choose the CD/DVD drive and press ENTER
  -Follow the on-screen menu

  Can you do this?
  It works well?
  There is a new problem?

• Installation of operating system of the flash player

  Hard drive in HP Pavillion G7 my husband failed several months ago, and although we tried to get help from HP because it was under warranty, with long expectations and have passed to a person and the other; We couldn't spend the hours of waiting, then kept trying again and again and finally the 1 year warranty has increased. Of course, HP wouldn't help us. So we just replaced the hard drive today and the first screen came enabled us to test the new hard drive and it works fine. It has the operating system stored on a flash drive. We are in HP PC Hardware Diagnostics UEFI which is where we did the test of hard disk drive and its now running a memory test. Once it is done, how install us the OS in his computer? Thanks in advance!

  When you request support, please provide the model name and product number complete (p/n) of the HP computer in question. HP/Compaq made thousands of computer models. Without this information, it can be difficult, even impossible to help you solve your problem.

  The information requested above are on the bottom of your computer, inside the battery compartment or on the BIOS boot screen. Please see How can I find my model number or product number? for help more to find this information. DO NOT include your serial number. Please enter the product/model information consumer HP Online Support page and post it here for our review.

  

  See performing a recovery of HP (Windows 8) system or perform a recovery of the system (Windows 7) HP for instructions on using your HP recovery media to return the computer to a factory State.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Help with installation of operating system!

  Ok.. I have a Sony Vaio NR series. I bought it in 2007. So I decided to return my laptop to factory settings.  So when I put in the recovery disc, it appears the Vaio Recovery Center. I pressed restore 'C '. The middle of it, it stops and says error 302 and 303, and then my laptop turns off. When I turn on my laptop it says no bone was found in 'c '.  My recommend a friend to install Ubuntu. I have install Ubuntu in my usb flash drive.  But how to install Ubuntu if I lost windows.  OH, I DON'T HAVE MY DRIVE REINSTALLION, MY SISTER BROKE IT

  Hello

  for any question of Ubuntu, ask in the Support of Ubuntu forums on the link below

  http://www.Ubuntu.com/support

  ____________________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Installation of operating system on Pover eadge 840

  My problem is the following...

  Follow the instructions that allows you to install the axis: "insert Dell and Documentation DVD systems management tools in the DVD player.

  Reboot your system and boot from the DVD.

  The Start Menu appears.

  Select Dell Systems Build and Update Utility to go to the Dell Systems Build and Update Utility Home screen.

  Click Server Instalation operating system"

  However, I do not get the option to "Click on Server OS Instalation" but I get that the computer doesn't see more than 512 MB of RAM and can not continue...

  Here is a picture http://tinypic.com/r/2zplicl/5

  Please help me

  Also make sure that the Install Mode OS in the BIOS (F2) Setup is DISABLED/OFF.

• Problems with Auto-updater after re-installation of operating system and creative suite for CS3

  Hello

  I had to reinstall my operating system. After that, I downloaded my CS3 Design Premium Creative Suite Adobe and reinstall applications. Now, when you open an application, I get an error of auto update. I just spent an hour talking to technical support to learn that they provide is no longer supported for earlier versions and request assistance here.

  Just going to leave the intro here first to see if someone is in the listening/still interested in helping with this 'old version' / error message.

  B

  Try direct updates

  https://www.Adobe.com/downloads/updates/

• Installation of operating system 64-bit on ESXi in lab environment

  I have an AMD Phenom II X processor 4 965 3.40 GHz on my pc with 8 GB of RAM. I installed vmware workstation 8 on it. I want to create a vmware view lab environment. I installed ESXi 5 on my vmware workstation and tried to install windows server 2008 R2 64-bit on it but every time I tried I faced with an error message saying that the 64-bit operating system is not possible. I neet to install windows server 2008 R2 64-bit for the transfer running server and you know this server must be a virtual thing and should be managed by vcenter server.

  According to the newspaper, the choice of 'Virtualiser VT-x/EPT or AMD-V/IVR' should not be available in the settings of the virtual machine to the virtual machine.  Note that this box is different from the drop-down list "preferred method".

  Virtualized EPT-x/VT or AMD-V/IVR is a new feature introduced with Workstation 8.0 and requires the latest virtual material.  First of all, upgrade your VM ESXi virtual material by going to VM-> manage-> change hardware compatibility and select compatibility with "Workstation 8.0."  Then, change the settings of the virtual machine, click the processors tab and check the box 'Virtualiser VT-x/EPT or AMD-V/IVR.'