Installation of Oracle 11 g on windows, error: specified home was not found in the registry

Similar Questions

• ACS 5.2 error 22056 object was not found in the identity applicable store (s)

  Hi, I have two ACS v 5.2 (primary and secondary) and some users are in stor in-house and others are in the ad.

  Local site topology is like this:

  PC - AP - WLC - ACS - AD

  Authentication method is PEAP(EAP-MSCHAPv2), and all users have the company certificate installed. In users of client OS is Windows 7.

  Users worked very well, but some reports disconnections of intranet users. I see in the ACS connect many "22056 object was not found in the identity of the point of sale." and "24415 Active Directory user authentication failed because the user account is locked out" alarms.

  I thought that it was because the user located in the AD of basic data, but sometimes the same user is authenticated successfully and other that I see the "22056..." or "... 24415" alarm signals.

  I changed the primary role for ACS to works as secondary and we see the same alarms.

  I Don t know is a matter of ACS, and how to resolve this...

  Please helpme

  Thank you...

  Hello

  How you are authenticating these users? They are present in the local database of GBA? If so, have you checked the State from inside account to see if the user account is still active and that it is not disabled?

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Error message "Required line was not found in the INF" LifeCam Cinema 3.0 on Windows Vista Edition installation Home Premium

  The LifeCam Cinema hardware installation error
  
  Tried to install Lifecam Cinema 3.0 but keep on receiving an error message "Required line was not found in the INF" - OS is Vista Home premium edition

  LifeCam installed on my laptop XP

  Hi seuss460,

  LifeCam software version 3.2 is available; Make sure you install the correct software for your hardware.

  You can download software LifeCam here

  Step 1: You can follow the steps mentioned in the article below

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  Step 2: See also the steps mentioned in the article below

  Troubleshoot failures to find the new LifeCam hardware

  http://support.Microsoft.com/kb/929087

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Plustek OpticBook 3600 will not install error that an error occurred during the installation of the device. The required section was not found in the INF

  Original title: Plustek OpticBook 3600 is not installed

  Found new hardware wizard runs, but after scanning stops the disc from the manufacturer with the message ' year error occurred during the installation of the device.»  The required section was not found in the INF"

  PC system is homebuild which, in theory, exceed the minimum requirements of the system of manufacturers.  Operating system is Windows XP Pro with Service Pack 3.  The scanner is connected to the USB 2.0 card that is not separately powered, but installed in the PCI slot.  I suspect that the problem lies in the PC rather than the scanner. but do not know what the problem is.  Any help would be appreciated!

  Hello
  You can try the troubleshooting provided in the link below steps to fix the problem.

  You receive a "unable to install this hardware" or "an error has occurred during installation" error message when you try to install a PCI device

  http://support.Microsoft.com/kb/841567

  Note:

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  See also:

  Error message: cannot install hardware. An error occurred during the Installation of the device

  http://support.Microsoft.com/kb/810882

• Error (10,47): EntryFlowPageCO not found in the oracle.apps.ap.oie.entry class.

  Hi all
  
  I extended a CO named IndusFinalReviewPageCOXX and I got the following error.
  
  Error (10,47): EntryFlowPageCO not found in the class oracle.apps.ap.oie.entry.summary.webui.FinalReviewPageCO in the indus.oracle.apps.ap.oie.entry.summary.webui.IndusFinalReviewPageCOXX class.
  
  
  I already drag the EntryFlowPageCO class file in the path myclasses\oracle\apps\ap\oie\entry\summary\webui
  and import the file. but the error remains the same... After that, I compile the EntryFlowPageCO class file and found a CO EntryFlowPageCO imports more. I drag the class of this CO also file in the appropriate path... But still the same error.
  
  Please give me the solution as soon as POSSIBLE.
  
  Thank you
  Amit Jaitly

  Amit,

  In the standard central, you can check this controller as entryflowpageco is not under myclasses\oracle\apps\ap\oie\entry\summary\webui.

  Its under oracle/apps/ap/goose/entry/webui put the same under this directory structure.

  Kind regards
  GYAN

• Fatal error. Object was not found.

  Hello

  I built aninstaller package that includes:

  3 x .exe

  LabVIEW2009 Dev Environment

  VISA Runtime Environment

  NOR-DAQmx

  When I try to run the Setup program (from the local hard disk) I get the following error, any ideas anyone?

  At soon inadvance, Alec

  .\Distribution.cpp(320): IInstallerError 10002
  Fatal error. Object was not found.
  class CPart object lookup by ProductCode cannot find the object {9A832E3A-8676-41CC-A945-9C6827D00B4C}

  I was building the installer directly on a network drive. If you create the installer on site and then copy it to a network drive, it works fine.

• C:\Windows\system32\CNUpdater.exe was not found.

  When I start the PC, it says there's an update available, but I get this error "C:\Windows\system32\CNUpdater.exe was not found." when I try to do the update. Can you help me with this? Thank you!

  But this isn't an update of Windows. See http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/f1c4b380-679d-466e-908d-bfa9684c6133 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot access the network drive or impossible to mount the network drive. Error "network path was not found.

  Original title: network path was not found

  HI, after the upgradation from windows xp sp2 to sp3 (next to the customer) I can't access the network drive or impossible to mount the network drive. ' ' It showa error "network path was not found.

  Hi gauravadavadkar,

  Thanks for posting your query in Microsoft Communities. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         Work on a domain?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with networkand check if the problem persists.

  S tep 2: if the problem does not persist in safe mode with networking, perform a clean bootto see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the steps to configure Windows to use a Normal startup state section of the article to start the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Startand then click run.

  (b) type msconfigand click OK.
  The System Configuration utility dialog box appears.

  (c) click on the general tab, click Normal Startup - load all device drivers and services, and then click OK.

  (d) when you are prompted, click restart to restart the computer.

  Method 3: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  In Windows network connection issues

  You can read this article for more information:

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Gettig error message: value "HKEY_LOCAL_MACHINE\": "ConfigDir" is not found in the registry for the Corel software

  Original title: Corel Software-related Error Messages, I tried to delete

  I'm getting 2 error messages associated with a Corel program I tried to remove it.  The messages are:

  1. "HKEY_LOCAL_MACHINE\" value: "ConfigDir" not found in the registry
  2. the language of the INTERFACE of vase directory is not valid

  I press Ctl-Alt-Del to exit pop ups of the error, and when appears in the Task Manager, the tasks that I have to stop are:
  1. bad language directory
  2. corel

  This happens when I right click on Office Documents and sometimes on my USB files. All opinions are appreciated. Thank you.

  Hi Bea Haive,.

  The problem may occur if the language pack is not installed correctly or not installed at all.

  To resolve this problem, you will need to re - install the language pack.

  You can consult the Corel support for more information links:

  http://CorelDRAW.com/forums/p/1748/6342.aspx

  http://CorelDRAW.com/forums/t/5386.aspx

  You can also get in touch with Corel for additional assistance:

  http://CorelDRAW.com/forums/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  How can I instill the microphone into my computer toshiba satellite, I have windows 7 32 bit, the microphone was not found in the device maneger?

  Go to the Toshiba support site and search page of your PC/computer laptop.

  Download and then install the last set of specific drivers for W7.

  See you soon,.
  Jerry

• message error in yahoo messenger installation (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem)

  I want to install yahoo messenger on my computer while the installation is the process this error message will appear (this application has failed to start because d3d9.dll was not found. Reinstalling the application may fix this problem). What d3d9.dll means? I try to re-intall this applications but same error message appear. Thank you! Any help or advice is appreciated.

  Hi vlademer,

  D3D9.dll is Direct 3D 9 runtime and is located in the C:\Windows\System32 directory.

  Follow these methods.

  Method 1: Follow the steps in the article.

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

  Method 2: Scan the file system (CFS) auditor to repair corrupted files.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

• Windows error 126 / ODBC32.dll (not found)

  my problems started with itunes doesn't work is not on my computer. This error message came up:

  iTunes.exe - Unable To Locate component

  This application has failed to start because ODBC32.dll was not found. Reinstalling the application may fix this problem.

  so I uninstalled and reinstalled the application several times but nothing has changed. I called the apple people to see if they could help me with my problem. I followed their instructions and downloaded programs to help install itunes differently. then this window came up:

  iTunes

  iTunes has not been installed correctly. Please reinstall itunes.

  Error 7 (Windows error 126)

  ultimately they could not help me to solve my problem and said I was more likely to have a problem with windows itself. shortly after other programs on my computer stopped working as well because the same problem of files being absent

  I tried to do the 'sfc/scannow 9Rating ' thing too, but it did not work...

  If nothing seems to work, including the SFC, try a repair upgrade installation:

  If you do not have a DVD of Microsoft Vista, borrow one from a friend.

  Read this tutorial on how to do a repair installation:

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

  Mick Murphy - Microsoft partner

• View CD can't mistake of player Director, was not found in the object #getPropRef, Script error. Continue?, yes no

  OT: Error player Director, not found in the object #getPropRef, Script error. Continue?, Yes No. nursing student cannot run his CD CD practice to work on other laptops. but not on it!

  Nursing Student cannot carry out its practice CD which comes with Prentice Hall Nursing book: "medical and nursing care 2nd edition, comments & justifications surgical."  CD works on PC and a laptop running Windows XP, Vista and Windows 7 and on an iMac; but not on it!  She has a Toshiba laptop with Windows Vista Home Premium and it just doesn't work!  My wife has lent her one of its laptops with Windows Vista, but the CD works fine.  What is the problem? I called Prentice Hall and got no help from them!  They said it was a computer problem.  This student is an exchange student and she would really any help.  I tried to clean the system and even tried the Optimizer5.2 perfect for the correction of errors in Script, but it didn't work.  Help please!  My only recourse is to backup all files and wipe the disk clean and start again to do a reinstall of all applications.  Any other ideas?  She had the phone since 2005 and the hard drive has only about 30% free space left on 147 GB.

  Hello cobblestone47,

  1. What is the version of the steering drive you use on your computer?

  2. the other users who are able to play the CD using the Director or shockwave player player is

  Player de Macromedia Director is also known as the Shockwave Player. I suggest that you uninstall the Director player and install the latest version of Shockwave player, and check if you have the same problem.

  You can follow the link below to download and install the latest version of Shockwave player:

  http://get.Adobe.com/Shockwave/

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• JspServlet was not found in the oracle application

  Hello
  
  When im trying to click on certain responsibilities on oracle application in an exception occurs, the SYSADMIN user
  
  responsibilities
  

  iMeeting responsibility for system monitor
  iProcurement catalog Administration

  do not work
  
  the exceptions are,
  

  Not found
  The requested URL /oa_servlets/oracle.jsp.JspServlet was not found on this server.

  application: 11.5.10.2
  database: 9i
  OS: Linux 4.0
  
  Thank you
  Verhasselt

  Hi Verhasselt;

  Its nice to hear the problem solved ;)

  Please change the thread status reply if it is possible, he pretend to wasting time in other forums users while they are looking outstanding which is not answered, thank you for understanding

  Respect of
  HELIOS

• Error: 'name of specified path was not found"when importing images

  Original title: ERROR TRYING to IMPORT IMAGES

  When you try to import disc images of scan of my phone, I get message specified path name is not found.  I have not had any problems with this before.  Help, please!

  Hi DBALSLEY,

  ¯ How import you the photos in the card?

  ¯ You can view photos from the SD card?

  Few things to try:

  1. unplug the card and plug it in again. Then try to copy the pictures.

  2. If you tried to transfer images using import to Windows, try to transfer normally and vice versa.

  How can I get pictures from my camera to my computer?

  View and transfer files to and from a memory card

  For more help, please post in this forum: http://forums.sandisk.com/

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.