Installation of QuickBooks 2012 gives the error "set.up.exe has encountered a problem and needs to close."
I try to install new software Quickbooks 2012 on the computer that is running Windows XP. The installation will start and get error "set.up.exe has encountered a problem and needs to close." I spoke with Quickbooks technical support on this issue, but they have been unable to solve the problem. I have read several of these posts on this forum about this kind of mistake, but none seem to be directly related to my situation. I plan to try to reload the Windows XP operating system, but unfortunately, the CD is missing. I'd appreciate any help that anyone could have.
Hi Bill Gammon,.
You can go ahead and try the suggestions and if the problem persists then I you suggest to run the Microsoft Fixit and then try to install Quickbooks 2012.
Solve problems with programs that cannot be installed or uninstalled
http://support.Microsoft.com/mats/Program_Install_and_Uninstall
Let us know if that helps.
Tags: Windows
Similar Questions
-
At startup, Error Message: dd.exe has encountered a problem and needs to close
Every time you start the Error Message is: dd.exe has encountered a problem and needs to close. Close.
"dd" is - in this list. Looking more far over the line to SD in this list...
What is the 'command' that launches the application (perhaps to widen the column to see everything) and what is its 'location' (perhaps to widen the column to see everything)?
(Only for the DD.)
You could uncheck here, restart and see if it happens again (it will not).
Then, with the information that I just asked for, there's the real 'location' and remove the 'command' begins with manually to get rid of it permanently.
-
Error message: KBD.exe has encountered a problem and needs to close
kbd.exe has encountered a problem and the need to close
kbd.exe has encountered a problem and the need to close
KBD.exe is part of the driver for your keyboard. Go to the support page and drivers from your computer manufacturer's website. Enter the model number of your computer. Locate the driver for your multimedia keyboard and reinstall.
-
After you install the update of security KB2707511 when I try to open a ms - dos 16-bit program, I get the following error: "NTVDM. EXE has encountered a problem and needs to close. " Application does not start. I can run without error command.com. Uninstall KB2707511 in Control Panel, add & delete, the application works. Install KB2707511 error occurs.
I have a lot of customers running a 16-bit MS-DOS - program that receives the same error. It seems not to be a malware problem, as it is homogeneous across many machines (unless, of course, all have the same problem of malware). By uninstalling the KB2707511 and the KB2709162 they all work. Something in these updates is in conflict with something in these dos programs causing the "NTVDM. Erorr EXE'.
-
In XP randomly receive error message "Windows Explorer has encountered a problem and needs to close"
I get the error message "Windows Explorer has encountered a problem and needs to close".
It occurs at any moment while I'll do something on my computer.
The signature of the error is,
App name: explorer.exe
App version: 6.0.2900.5512
The mod name: unknown
Mod Version: 0.0.0.0
Offset: 4ec683bdAfter the error message appears and I click 'send or do not send', everything on the screen refreshes, & I have to reset some programs.
I am unable to do a system restore to solve the problem because I have no good restore point before this problem occurs. He began to occur initially in Jan 2011 & I can't go to a restore point of return in 2010.
Can someone please?
* original title - I get an error message "Windows Explorer has encountered a problem and needs to close". It's a little different from the others I found the message communautaires.*
Hi Jaaz76
Method 1:You can perform a security analysis and check if there are viruses or malware present. Check out the link below to run the scan and check if this helps-
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Method 2:
Also I suggest you perform a SFC scan and check. To Perform a Scan SFC -
a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow
b. type the following command and press ENTER:
sfc/scannow
c. a message indicating that "the system scan will start. Be patient, because the analysis may take some time
d. If all files require a SFC replace will replace them. Hopefully though you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
e. once the scan is finished, close the command prompt window, restart the computer and check.
Check the link below for further guidance on scan SFC - mentioned
http://support.Microsoft.com/kb/310747I hope this helps.
-
The error occurs when I insert the game black & white 2 or command and conquer the first decade and click install on a automotive screens popping up, I am sure that these two errors are almost identical and sure if one is fixed so will the other be.
The error that says "Setup.exe has encountered a problem and needs to close. We are sorry for the inconvenience. »
To try to fix it already I found a page here which tells me how to install drivers different installshield, and I installed everything that have been listed. My operating system is Windows Xp home edition
Hello
Were you able to install these games without any problem before?Step 1: Install all updates of windows on your computer and check the number.
Reference: http://support.microsoft.com/kb/306525
Step 2: Copy the game on your computer, then check the issue.Step 3: Perform the clean boot your computer.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135Note: To restore your computer to a Normal startup mode, follow these steps:
1. click on start in the box start the search.
2. type msconfig and press ENTER.If you are prompted for an administrator password or a confirmation, type the password, or provide confirmation.3. on the general tab, click Normal Startup - load all device drivers and services and then click OK.
4. When prompted, click on restart.Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
I use a dos program of basis for the drafting of the accounts. This gave all of a sudden the error today: "NTVDM. EXE has encountered a problem and needs to close"I use Windows XP Professional SP2.
Hello Eric,
Take a look at this article to see if it helps:
Troubleshooting in Windows XP MS-DOS-based programs
http://support.Microsoft.com/kb/314106PS Questions should more properly be addressed to a subforum of Windows XP
as http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/and btw, your system must be on XP Service pack 3
See Windows XP Service Pack 3 (SP3): Installation Guide
http://aumha.NET/viewtopic.php?f=83&t=33296also information for Windows Xp Service Pack 3 (sp3)
http://www.bleepingcomputer.com/forums/topic146857.htmlSpace hard drive for Windows XP Service Pack 3 requirements
http://support.Microsoft.com/kb/947311/Support for WinXP (x 86) SP2 ended July 13, 2010. After this date, the computers running Windows XP SP2 (x 86) "will no longer receive software updates from Windows Update" (automatic updates will not work and the Windows Update Web site is not available) until SP3 has been installed. Extended support for WinXP SP3 will continue through April 8, 2014.
Does that mean if my version of Windows is no longer supported?
http://Windows.Microsoft.com/en-us/Windows/Help/What-does-end-of-support-mean -
Hello
Uses a deployment tool to deploy the patches in the environment, and this time after doing so I am getting an error below
"update.exe has encountered a problem and needs to close. We are sorry for the inconvinience.
Please help its critics.
Concerning
Vikram
It is a forum for specific consumers.
You will find appropriate support (such as it is) in this forum-online http://social.technet.microsoft.com/Forums/en-US/itproxpsp
-
OK a bit on my setup, I have a Server 2008 R2 as a DC area, and in my Department and the engraving, we have four XP Pro SP3. After the engraving machine is updated Automatic last night when we try to access a MS-DOS 16-bit program that works, I get the following error.
NTVDM. EXE has encountered a problem and needs to close. We are sorry for the inconvenience.
Error signature
AppName: ntvdm.exe AppVer: ModName 5.1.2600.5512: ntvdm.exe
ModVer: 5.1.2600.5512 Offset: 000206f1
-
Running a program back that I have used for years, network of four computers, now with the same message. "NTVDM. EXE has encountered a problem and needs to close "what should I do?
There seems to be a problem with KB2707511:
-
Trying to get my Microsoft Life Cam HD5000 video work. He worked until a week on Windows XP there and all of a sudden stopped sending this message
LifeCam.exe has encountered a problem and needs to close. We are sorry for the inconvenience.
I uninstalled the program and reinstalled and this notice appears again with this 'mistake' being
AppName: lifecam.exe AppVer: 3.60.253.0 ModName: kernel32.dll
Any ideas on how to fix as all drivers are up-to-date and update of the software. As mentioned he wasn't working a week so there is no idea why the video suddenly stopped.
Concerned
Hi Concerned25,
This problem may occur if you have one of the programs listed below, installed in conjunction with the lifecam.
Earthlink total access.
Venturi VClient
Nero
Studio9 Pinnacle systems software
F-Secure internet security
Dell Web cyber coach
AOL or Yahoo toolbar
FixIt utility.
To solve this problem and find workarounds, see the link below.
-
Original Titus: cannot install software blackberry "BOLD"
When I start the software Black Berry through the icon to the desktop, the windows error reporting or display below:
Quote: Black Berry Desktop has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were in the middle of something, the information you were working on might be lost.
Please tell this problem to Microsoft.
We have created an error report that you can send improve us Black Berry Desktop Software. We will treat this report as confidential and anonyomous.
End of quote
What data means this error report contain?
Why should I report to Microsoft?
I received error below during the repair software blackberry
Quote: The path:
' C:\DOCUME "1\HLZUTS" 2\LOCALS "1\TEMP\WZSE1. Berry TEMP\BLACK Office software.msi' is not found. Make sure you have access to this location and try again, or try to find the installation package "Black Berry Desktop Software.msi" as a folder that you can install the Black Berry Desktop Software 6.1 product
End of quote
No path
Hi ZiaHL,
Try the steps listed in the article mentioned below and check if it helps you to fix the problem:
"BlackBerry Desktop Manager has encountered a problem and needs to close. We are sorry for the inconvenience. "during the synchronization process
You can also view the article mentioned below for more information:
BlackBerry Desktop Software issues fixed in this release
Let us know if that helps.
-
A few days ago, I downloaded SP3 on my windows XP computer. and update the windows installer, eversince, then I have a reception an annoying popup message, which reads as follows: Wuauclt has encountered a problem and needs to close > we're sorry for the inconvenience. SEND a MESSAGE ERROR / DON "T SEND I have highlighted both send and not a thousand times and can't get rid of this annoying popup."
What can I doHi AgnesBradshaw,Follow the steps in the article to resolve the problem: -
Printing error: "Spooler subsystem APP has encountered a problem and needs to close."
Original title: cannot print to the network printer.__I have a net wifi Windows XP, SP 3 and an IBM laptop.
Printers seem to be installed (XP has the printer connected via USB) but when I try to print from IBM I get an error as follows:
"Subsystem spooler APP has encountered a problem and needs to close."
The printer is a HP Deskjet D2660 and the LAN is configured correctly by using the wizard.
I also discovered that the print spooler is never started.
In addition, even when I start the spooler it remains not said during the next time I start up.
Can anyone help? I've been banging my head for two weeks.
Salvation;
Thanks for responding.
My IBM ThinkPad running XP - Pro
My computer is a DELL and running XP-Home Edition
Printer installed on DELL
I have a WIRELESS LAN installed by the installation wizard. The net works fine except for the printer.
Every time I start the spooler does not work. If I set the spooler of runing the choice is never registered. the next time I start up, the spooler does not work.
I finally asked some experts to solve the problem of no access to the network printer. It took them more than 4 hours (for a cost) to make it work. Everything was going well until the next day. The problem is back. My thought is that the register should be updated so it will retain the corrtions.
I downloaded the MATS_RUN.printing.exe utility. It corrects everything except this message on the Spooler subsystem.
Any advice you can give me would be greatly appreciated.
-
I'm using a Thinkpad T43 with XP Pro. When you're cycling on it always shows a message of "Thinkpad Fn + F5 has encountered a problem and needs to close. We are sorry for the inconvenience. Please tell this problem to Microsoft. "I hit send and continue switch upwards and everything works fine, including the wireless. Is it possible to get rid of this annoying little window on start up? Thanks for any help.
* original title - Fn + F5 false error message *.
Hi and thanks for the answer-
When I woke up this morning it became me to the simple thing instead of all things "a simple" I had tried to do. IBM keyboard shortcut RELOADED drivers and the problem disappeared. Thank you very much for you reply and suggestions.
Maybe you are looking for
-
How to install bluetooth on HP G50 126NR laptop computer with windows Vista?
I learned that my portable HPG50 has no Bluetooth. If I have to buy a bluetooth for this adapter? is there a software? What do you suggest to me (other than buying a new computer)?
-
Front 2 USB not working properly
So I got my Erazer X 510 for about 5-6 months and my USBs in front of 2 do not work properly. The blue, I think that USB 2.0, works for the load, but whenever I put something she says even the Description of the device of the request has failed. One
-
The upgrade of Vista (32) for Vista 64 on m8120n (Media Center PC)
I want to improve my PC Media Center of Vista Vista 64. I noticed that HP has the drivers for Vista 64 on the site, very cool. Is there anything else I should be aware of when you do? Is it possible to dual boot between Vista and Vista 64? I do it
-
PSC 1350 all prints a test page every time when turned on
After changing the cartridge, we printed test page. Now, whenever we turn on the printer it prints test page automatically. How to disable this option? Thank you
-
Build the error associated with a class - why?
I have a class that I am creating I can use in any application as a utility class to call the browser. However, when I add this class to an application - any application, including the HelloCascades - the build fails. By comparing the console logs I