Installation of Satellite L750 poster error recovery

Trying to get back to the factory settings but displays ERROR: 10-FC12-0003. Help, please

Advertisement

You have posted another thread here:
http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=256003
the laptop was not able to start the system, I think that this problem could be linked to this error message.
Possibly the HARD drive is faulty or something wrong with the memory

Are you able to boot other disks like Win XP, Vista or Linux?

Tags: Toshiba

Similar Questions

  • Satellite L750 - no error at startup boot device

    When you try to start my Satellite L750/755, I get an error no. Bootable Device.

    Before I try any recovery, is it possible to remove the HARD drive and connect it to my other PC so that I can get all my pictures, music, etc. it. If so, do I need.

    I have it on my old desk, and bought a HARD drive with a USB caddy, if disk HARD just looked like an external drive.

    Thank you very much

    Tim

    Yes, you can remove the HARD drive and connect it to your other laptop / PC with USB HDD external enclosure. With the help of this forum you can connect your HARD drive as an external device that must be recognized and listed in the Windows Explorer, so you can have full access to all your stored data.

    Back up all your data and put the HARD drive in your laptop.

    Usually, if there is not a hardware problem you can start your laptop and press F12 to get into the boot menu. When the boot menu appears on the screen that you can put the recovery disk of information optical disk drive, choose the CD/DVD drive and press ENTER. After making this optical drive should start the disc and start to copy the data to the HARD drive.

    What you can do before you start using the recovery disc is to enter the BIOS and set it to default settings.

    Please try it and send feedback.

  • Re: Satellite A500 - Windows error recovery

    I have a problem with my laptop

    When I restart my laptop, it tends to be stuck on this windows error recovery screen. It gives me two options
    (1) Lauch Startup Repair
    (2) start Windows normally

    Tried both, it turns off, reboots that it ends on the same screen over and over again. Tried to access it via safe mode, nothing helps. tried to fix it through windows disk 7, did not work. tried last good configuration, not good either.

    It's the screen that I always end up and it does not go further.
    http://I585.Photobucket.com/albums/ss297/fobssquad/P1010014.jpg

    Please can someone show me a few guidelines as to how can I do to fix this problem. I'm a freshman in College, I have no money to take it to a professional. That's why I try to fix it myself as I have urgent need.

    Thank you in advance.

    Hello

    Hmm, not easy, but in my opinion it s something wrong with properly installed Windows OS and HDD recovery doesn't work

    You have the Toshiba Recovery disk?
    If Yes, you can use it to restore the original settings windows. Just boot from that disk and follow the instructions on the screen, everything that s! :)

  • Satellite Pro A210 - error recovery after a new installation of HARD drive

    Hello

    I have a satellite pro 210 (bios v1.6) has died the HARD drive.

    I bought a new WD Scorpio Blue 250 GB HARD drive and ran the reinstall drive (I've done exactly this for a friends Equium a month or so back and all worked flawlessy!)

    Everything worked fine until the first re-boot, went through the usual stuff:
    Please wait a moment while windows starts for the first time
    Then a windows background, spinning slider with waiting message please, much HDD activity
    Then the sudden error:
    "Installation of Windows could not configure windows to run on a hardware on this computer."

    Does anyone have ideas, what it might be?
    A google search suggests the sata bios settings, but I do not see in the configuration of the bios page.
    In my view, there is a new bios v2 by download - would this help?
    If so how can I install it when the computer does not start vista? Or any other suggestions?

    Thanks for reading.

    Cheers, Stephen

    Hello

    The SATA driver is not necessary if you use the Toshiba Recovery disk because the image on the recovery disk contains the SATA driver.
    So there must be other reason for it.

    In your case, I recommend setting the BIOS settings by default and start over once the recovery procedure.
    Maybe something went wrong during the configuration of the OS if second installation is worth a try

  • Satellite A300 - displays error recovery disc creator

    Hello

    I have a Toshiba Satellite A300 (PSAGCE) and I created the recovery by using the "TOSHIBA Recovery Disc Creator' disc but I did this a few months ago, but now the disc is scratched, and when I am formatting my computer it gives me an error when loading files. So I decided to create another disc, using the "TOSHIBA Recovery Disc Creator', but she also give me an error with one of the files during the creation of the disc. What should I do now?

    I have a friend who has a Satellite A200, can I use the disk? I did a printscrean showing the error. Sorry the bad English, I'm Portuguese...
    [http://img199.imageshack.us/img199/4030/semttulovj.jpg |]

    Hello

    It is good that you posted a screenshot of the error, but perhaps you can translate it into English, it would be more useful.

    In any case, the disks that you use to create the recovery disk? I m using Verbatim DVD-R media. It worked perfectly for me and I can recommend this path.

    In addition, you can see the Toshiba page for an update of the firmware of your CD/DVD drive.

    Finally and above all, I doubt that for Satellite A200 recovery disk will work for you also. The models are different

  • Script installation Ubuntu 14.04 post error

    A dependency error is popping up when I install skypeforlinux. Here are the logs

    Implementation of skypeforlinux (1.1.0.21)...
    Ok
    sources. List.d is not a folder
    dpkg: error processing package skypeforlinux (-configure):
    installed of subprocess post-installation script returned error exit status 1
    Errors were encountered during execution:
    skypeforlinux
    E:/usr/bin/dpkg subprocess has returned an error code (1)

    Label "LinuxAlpha" of the wire.

    mnpoonia wrote:

    Even after the following steps in the given link, the error is still there.

    Hi mnpoonia,

    You can try the latest version 1.3.0.0? You can get it from here. There was a bug in the postinst script, so that even with these steps on the repo page would get you eventually run the postinst script, and thus the error.

    Thank you!

  • Satellite L505D-S5983 - error Recovery DVD

    I created the recovery DVD (Satellite L505D-S5983) discs and creating disk 1 the following message appears:

    "Cannot play the next file. "D:/ZZImages/ZZImages/PREINSTZSWM (Error code: 020150-20-00000000).
    I tried twice and got the same error again. Has created the dvd 2 of 3 and 3-3 with success.

    Any idea?

    Thank you

    Until we start the discussion please can you me which media empty that you use (DVD - R, DVD + R,...)?

  • Satellite M305D-S4830: error recovery - Partition creation failed

    Computer: PC Toshiba laptop
    Model: Satellite M305D-S4830

    Problem: Originally windows wouldn't start; so I decided I would try reformatting it to solve the problem.
    First of all, I erased the hard disk; now, I'm trying to use the "TOSHIBA Recovery Wizard" provided with the laptop for reinstalling the operating system, but end up getting the following:

    "ERROR: 08 - 0 74-0000.
    Failed to create partition. »

    p.s. I've tried formatting using the command prompt, but it says format failed after choosing a volume name.

    p.s. #2 when I run the Startup Repair tool, I get the error that the volume is corrupt

    I noticed there is a hidden partition called X: where there is a backup of the operating system out-of-box, but have no idea how I could use this backup to possibly restore windows...

    What should I do?

    I think the problem is the partition on your HARD drive.
    You said erase the hard drive, well, this might be the reason why the recovery is not working as it should.

    In my opinion full HARD drive must be formatted again (all partitions must be removed and formatted too.).
    Perhaps you could use an original disc of Microsoft (Win XP CD) to format the HARD drive and you can then use the Toshiba Recovery disk to recover the laptop again!

  • Satellite L750 - implementation of Recovery Wizard when first turned on

    Hello world

    I recently bought a L750 and when I first turned on it, came a window asking me to set up the re product Recovery Menu Toshiba Recovery Wizard. Now, this is all new to me, so I didn't really know what it was because there were no instructions, so I answered a few questions then I cancelled out of the task, in which case my answers were wrong. Can anyone help me re - establish, answer the questions correctly and also where to find a second time to implement?

    The first 3 questions that I answered were:

    1. Please select a type of operating system to continue - 64-bit version of Windows 7 32-bit version or Windows 7?

    2. Please select a process: default factory software recovery (recovery of State out-of-box) OR wipe the hard drive (delete all data and the paartitions on your hard drive)?

    3 Please select a method of factory default software recovery: recovery of State out-of-box (System Recovery Options are included) OR recover without changing the disk partitions hard OR on a custom size partition?
    Then I canceled here.

    Thank you very much
    SC ("laptop computer Novice")

    Hi Shell73,

    > 1 . Please select a type of operating system to continue - 64-bit version of Windows 7 32-bit version or Windows 7?
    I would choose the 64-bit version because only 64 bit version supports 4 GB or more. Even you have t n 4 GB I would choose this version because you can very easy upgrade of RAM and 4 GB of RAM is recommended for Windows 7.
    If you don t have very old programs they need 16 bit you can use the 64-bit version.

    For example, I use Windows 7 64 bit on my two laptops. I put the 32-bit version of t need more because most of the applications are already compatible 64-bit.

    > 2. Please select a process: default factory software recovery (recovery of State out-of-box) OR wipe the hard drive (delete all data and the paartitions on your hard drive)?
    You must select restore to out of the box to this facility and the installation of recovery. As its name suggests, erase the hard drive, it will remove the HARD drive whole and nothing more. So, in the end, you have a removed HDD without software Yes, a bit useless (in my opinion).

    > 3. Please select a method of factory default software recovery: recovery of State out-of-box (System Recovery Options are included) OR recover without changing the disk partitions hard OR on a custom size partition?
    Choose the recovery to out of box state too. This will restore normal factory with all the drivers and tools. After that, you are also able to use the HDD recovery partition size option and that can also be changed after the installation of recovery.

    If you have any other questions, just after again! :)

  • Satellite L300 poster error 0xc000000f

    My laptop s son had this error yesterday and all day today, I tried to solve the problem and hit a brick wall.
    Here is what I tried so far, it is running vista, safe mode recovery F8, F12 boot from CD/DVD with recovery discs, F12 boot from CD/DVD with windows Vista recovery (downloaded today), all are for the same purpose, it will start to install the files, then just the screen goes out and hangs there until I restart the laptop.

    I still have the guarantee of a month left. It is best to give the pc world?
    Thanks in advance. Dean

    Hi mate,

    It sounds like a hardware problem... I mean if you can reinstall Windows using Toshiba Recovery disk because it shows some errors it can t be a software problem.

    I think the best option would be an authorized service provider. If your laptop is still under warranty, the repair should normally be free. Technicians can check the mobile and Exchange parts of defective material.

    Here, you can search the nearest SPAS:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  • Satellite U845W Win8 - error recovery

    WHEN I WANT TO RECOVERY AFTER U845W FORMATTED MY LAPTOP TOSHIBA ME OUT... THIS ERROR DISK NOT INITIALIZED (S) FOUND.
    CLICK 'YES' TO INITIALIZE THE DRIVE HARD (S) AND RESTART YOUR PC RECOVERY AND TRY AGAIN.
    CLICK 'NO' TO STOP YOUR PC WITHOUT ANY CHANGE. WIN8

    To be honest I n don't know what the problem is here, but my advice to you is: go back to Win8, create a media recovery (DVD or USB) and when you want to reinstall OS use this recovery media.

    Just for info: http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm

  • Satellite L300 and error recovery

    Hi all

    When you use the recovery disk I get the following error: HDD01 is missing.
    The laptop was fine before recovery

    See you soon

    Rob

    Love all here: _
    If you are not able to recovery the laptop because your HDD recovery option doesn't work more or because you t n t have the recovery disc, then you have two options;

    You order a new Toshiba Recovery disk, or you use the original Microsoft disc to reinstall the Windows operating system.
    But there is little difference between the Toshiba recovery disc and the disc of Microsoft;
    TOSHIBA disk contains all the tools and the driver Toshiba but MS disk contains only a Win OS and you will have to download and reinstall also the tools and the driver of Toshiba.

    Good bye

  • Satellite L750 / 04P - creation of recovery - an error Gx8004005

    Hello

    I bought a Toshiba Satellite L750 / 04P XC N 7944, for my son, we have tried to implement using the Toshiba Recovery Media Creator and the Windows 7 system recovery disks. So far, I've used 5 DVD s and can t go a disk without error.

    When you use Windows 7, an error comes up Gx8004005. All of the suggestions.

    I created an image backup and system, I hope I'm never confident until they save it properly.

    Hello

    Have you tried using different empty discs from different manufacturers? I recommend you to use DVD-R only disks. My recommendation is TDK or Verbatim discs.

  • Satellite L750 - could not start recovery image installation

    Hi guys,.

    I struggle to restore the original configuration (format) my toshiba satellite L750 push button power and zero (0) button together.

    I did factory restore before setting because there is a virus on my laptop. After format, all right. Now my laptop is infected with the virus once again, but I won't be able to format my laptop more. Whenever I press the power button / stop and zero button (0) I always hear a beep and won't stop until I press zero (0).
    I have before partition.

    My question is why I couldn't format my laptop more like how I use before (by pressing the power button / stop and zero button)?

    Can someone help me how to format my laptop the button works / stop and zero button does not?
    Thank you

    Hello

    If you have laptop model please follow the instructions described on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
    You need to boot the laptop with F8 and choose the option to fix my computer.
    This option is available in advanced startup options?

  • Satellite L750-1LC - Boot Manager is missing by using the recovery disk

    I bought a Toshiba satellite L750-1LC and I try to create the DVD 4 to save.

    On the first dvd that only he came an error reading twice, the other DVDs were ok.
    When I try to recover from the DVD the recovery process got stuck on the first dvd so I had to reboot and try again, but the same thing happened to it.

    After you restart the system it came a message that bootmnager is missing and windows and any other thing was gone.

    Is the promotion of "No. Matter What Guarantee" "covering this type of flaws?
    If so, what are the steps to qualify for this promotion?

    I said that I am a Romanian citizen and I have already implemented for promotion in the specified time interval.

    It seems that the first recovery disk is not created properly because you got an error message.
    As I understand your message, you have tried to boot from the first recovery disc (which was not correctly created in the past) and so the installation could not be completed successfully.

    Now, you cannot start the operating system, because the Boot Manager is missing and possibly the system is deleted also
    I see just one solution: order the new disk recovery from here and use it for the installation of the OS: http://backupmedia.toshiba.eu/landing.aspx

    PS: as far as I know that hardware issues are covered by the warranty, software issues not covered by the warranty

Maybe you are looking for