Installation of Satellite P200-144 recovery disk problem

Model Satellite P200-144 PSPBGE

Hi all

Today I received a 2nd recovery disk mail via UPS directly at Arvato distribution GmbH

Yet once there not in the exact same place as the 1st disk that I received but returned and they replaced.

My original recovery disk was lost around the House 3 months back, which I am now myself kicking on.
Reason for restoring factory default settings was that I wanted my pc to be clean like a cell phone factory default as it was full of registry errors.

In any case on the problem, after that 67% of image recovery happens with the corrupted file, here is the installation proc.

Try to rename all the letters of potential left to HDD0
Try to rename all the letters of potential left on HDD1

Microsoft DiskPart version 6.0.6000

Copyright (C) 1997-2007 Microsoft Corporation.

On computer: MINWINPC

Disk 0 is now the selected disk

DiskPart succeeded in erasing the disc

DiskPart succeeded in creating the specified partition

Partition 1 is now the selected partition

DiskPart successfully assigned the letter of the drive on the mountpoint.

100 percent complete

DiskPart successfully formatted ther volume

DiskPart succeeded in creating the specified partition

Partition 2 is now the selected partition

DiskPart successfully assigned the drive letter or mount point

100 percent complete

DiskPart successfully formatted ther volume

DiskPart marked the current partition as active.

Define RECO-info-guid = 4D2AE583-8FD5-4D7D-AE07-B098C1CBA1B5
RECO-info-imagecount value = 2
define the RECO-info-partnumber = 1
RECO-info-numsplit value = 5
RECO-info-bootindex value = 0

L ' ImageX for Windows tool

Copyright (C) Microsoft Corp. 1981-2005 all rights reserved.

Progress: 67% 06:44 minutes

[WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
[compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

[RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

[WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
[compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

[RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

[WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
[compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

[RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

[WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
[compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

[RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

[WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
[compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

[RETRY] Restore C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

[WARNING] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat. [United Nations
[compress files: (seq.90)-> file corrupted block at offset 012E3CF9]

[ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

ResourceExtractToFileByStruct: (seq. 50)-> Uncompress or WimCopyFileEx failed

[ERROR: 1392] C:\ProgramData\Symantec\Definitions\VirusDefs\BinH ub\virscan5.dat.

Error image restoration.

The file or directory is corrupted and unreadable.

Error: ImageX could not apply E:\05021XSP.swm Index 2 Weird Vista in C:!

Is there a reverse this problem?
My thoughs is that the image is corrupt.

The error that you declare, is a fault with the Vista disk image cannot be applied to the hard drive.

Which you used 2 recovery discs of different product, which would indicate that there is not support for product recovery but a defective hard drive, possibly bad sectors on the hard disk.

If the laptop is in it duration of warranty, then give Toshiba a call for the book on deposit for a repair of the equipment.

0844 847 8944

Tags: Toshiba

Similar Questions

  • Satellite P200 - Product Recovery Disk 2/2 does not work

    Hello

    because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

    Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

    But what abot * Disck2/2 product recovery? *
    At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

    Someone had this problem too?
    What do you have on this?
    Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

    Thanks in advance for any response!

    Artisans

    Post edited by: craftsmen

    Hello

    > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

    I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
    So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

    PS: what files you can find on the second disk?

  • Satellite A40-151 recovery disk problem

    Hello

    I hope someone can help.

    I bascially bought this new laptop altogether earlier and until recently he works very well, but a few weeks ago the hard drive, I think that then, it happened to the extent where everything would load and then the pc would lock or it would freeze on the windows loading screen.

    Now, I did a little research and from what I could gather my HDD disappeared.

    I then bought a new hard drive for this the same exactually that I had same model, same brand etc and even same GB, which is 30 GB.

    I placed in the new hard drive and went to install windows xp on the recovery disks, but now I get a problem it starts and tries to install the os, but about 15% in the disc stops spining and I get an error 437 that the file cannot be run or something like that.

    I did something wrong? do I need to buy a whole new operating system? I hope someone can help

    Thank you for your time

    If you have purchased this Satellite as new and quite while ago why you pay money for new hardware? If one of the pieces of equipment is defective warranty will cover the costs of replacement.

    As far as I know that satellite A40 is old enough laptop model, and I guess that it takes more than two years. Anyway, if possible try to install the OS by CD Microsoft facilities to determine if the OS facilities can be completed. Maybe faulty recovery CD is (some scratches).

  • Satellite A300D - creating recovery disk problem

    Hello.

    I have Toshiba Satellite A300D-11 t (extended A300D-11) and I would like to create recovery disk. Problem is that I can't run the Toshiba Recovery disk creation tool. There is no shortcut in the start menu.
    I tried to run Program Files.

    Program itself exists (or at least I think it does), there are files in the Program Files folder, in "Programs and features" program is also so I could remove it.
    Simply click on the file TosRDC.exe (or any other file *.exe in this case) and it does not start.

    For memory - recovery partition exists and has not been changed.

    System - Vista Home Premium 32 bit.
    What should do?

    Hello

    I would say to pick up the machine from the disk and then, immediately after the machine, you should try to create a recovery disk. It could be that something in the meantime destroyed some piece of software in your operating system that could be the reason of this problem.

    Maybe not a very elegant solution but the only one that works every time.

    Welcome them

  • satellite boot and recovery disk problem, help please...

    Hello

    Well, here's the question. My satellite is a few years old all of a sudden, she leaves the start. Gets the starting address windows xp mode then hangs and repeats the process. So I thought, well... I just install my recovery discs...

    Well well, thank you for a reason, and his frustration as what... I get an error of bad machine. Don't allow me to install my recovery disks. Call toshiba, they say my warranty has expired have to go pay a service representative... Arrgh...

    This was purchased new and this is the correct machine...
    Anyway... when I'm bad machine, I get:
    Failed installation aborted/a process!
    A:/>_
    I'm assuming, there is something I can type here to recognize my machine... Any ideas? Toshiba was no help. Or... If you have an idea how can I start this thing without recoery disks.

    Thanks in advance...

    Hello
    before anyone can say anything, I would be nice to know what type of laptop you have.
    Cause Toshiba has in the meantime changed the recovery process.

    Good bye

  • Satellite L300-147 recovery disk problem

    Okay, so I lost all of my drives for my laptop (story tl; dw) and then it dies. I have order a new Toshiba Recovery disk image and start running repairs to it.

    Pull upward, press F12, select CD/DVD from the Start Menu and press ENTER.
    It gives me a message "Windows loading flies... "and a progress bar.
    Progress bar ends, clears the screen, there are about 30 seconds of animation 'The thought of Microsoft Bar', the computer is hard drive/CD drive noises.
    Then...

    Nothing happens.

    For ten minutes, nothing happens.

    Except a piece of my electricity bill is consumed by the white backlit screen.

    All words of advice, support, etc. greatly appreciated.

    Mark

    Hello

    At first, I can say that this recovery disk cannot be used for repairs. You can only use it for the new operating system installation.
    Behavior described is certainly not OK and you should be able to see the menu with the language options listed.

    What you can do?
    I'm scared of m not big thing. BIOS setting to default and try several times to see if you're lucky and the installation of recovery will be properly implemented.
    For testing purposes, you can try to get the Microsoft installation disc and see if the installation of the operating system starts correctly.

  • Satellite P200-144 - lost profile user & Running very, very slowly

    Hi, please excuse my explaniation below, but I'm not very technical interest and need help?

    I have a Satellite P200-144 curries in Sep 07 was bought for my college courses. I listened to a CD of night via windows media player. CD proceeded to freeze and then I got an error message something in the sense of "windows media player database corrupted", then the machine stops. When it restarts itself, my user profile and associated parameters have disappeared (as well as my documents, music, photsos etc.). Once the machine booted, I log in under my usual profile, but he told me that my profile would not load correctly and I've been signed by using a temporary profile? In addition, the machine seems to have trouble doing anything at any great speed; each individual operation is taking an absolute age... to open the internet browser is as slow as dial-up almopst and I am supposed to have high-speed broadband! The machine makes a quiet rattling noise that was not previously; someone suggested maybe it's my hard drive?

    On the advice of the internet and others, I tried the following:
    Creating a new user and copy my user data-error message back sying this did not succeed.
    Twp machine restoring previous dates separated - "error unidentified" who did not do so.

    Please help... anyone?

    > The machine makes a quiet rattling noise that was not previously. someone suggested maybe it's my hard drive?
    Hmm, HARD drive failure is possible... maybe some bad sectors in the partition or HARD drive, however, this is only speculation and a new installation of operating system from the recovery CD would be necessary and advisable to ensure that this is not a HARD drive problem.

    Of course you should backup you files and important data because this procedure would format the HARD drive.

    I know it's a radical procedure, but it is necessary to make sure if the problem is hardware or software associates.

    Good luck and best regards

  • Satellite P200-144: Touchpad works does not after Microsoft Windows Update

    Hello

    I have a Satellite P200-144 and since I installed a new Synaptics driver provided for me through Windows Update the touchpad did not work.

    I tried to roll back the driver, re - install a new installation of a driver Alps (as suggested by a messsage on board), but this has no effect. I tried to revert to a previous state of the system, but this fails to happen.

    I am running Windows Vista Home Premium that came with the noteboos when I bought a few months ago. I also went in the settings in the control panel and none of the settings work - help!

    Someone has it has happen to them, or does anyone know of a fix for this?

    Kind regards

    Chris

    Hello

    a quick and efficient solution would be to backup your data on an external (DVD, USB - HDD, etc.) to recover your machine and then to AVOID such Windows updates, as this driver IS not native drivers from the manufacturer. Just install the drivers supplied by toshiba, since they act on your machine.

    Unfortunately I have Don t have another solution for you, then it would be best to try this method and give a quick answer if it worked.

    Welcome them

  • Satellite Pro A60: Recovery disk damaged

    Can someone help me get a new satellite pro A60 recovery disk. My first drive was damaged.
    Thank you
    carol9430

    Hi, Carol Ann,.

    You can get the new partner authorized Service Toshiba recovery disks. You will find them listed on the Toshiba Web Site.

    Kind regards

  • Re: Can I use the other Satellite U400 series recovery disk

    I have Toshiba Satellite U400 121. My recovery disk does not work may be due the scratches that I see in it. I took the laptop to the Toshiba Center service and I got a negative support of them. They said, they can't put the Windows Vista because the recovery disk is not there, and they have put Windows XP inside and handed to me.
    later I got to know that Windows Xp is not Geninue one. :|

    I can still see one of the Partition 'D:' with folder HDDRecovery inside.

    So can I use Recovery Disk of all PC model Toshiba laptop other than the Toshiba Satellite U400 121 recovery disk.

    In fact, I tried with the other model recovery disk, that at boot with this disk, Recovery Wizard starts up, but since I'm not sure about this one I stopped there and brought out.

    Please one of you let me know if you have valuable contributions on this.

    suggestions are welcome!

    Thanks in advance.
    wassim :)

    Post edited by: Mikael

    Hello

    I don't know Mr. which series Satellite U400-121, it is, but you must use the recovery disc designed specifically for this series of laptop!

    Another recovery disc cannot be used because the drivers and tools that have been implemented in the image of Toshiba are not designed for this series of laptop!

    By the way; You can order the CD from recovery from here:
    https://backupmedia.Toshiba.EU/landing.aspx

    Good bye

  • Satellite A135-S4666 - recovery disk displays an error message

    The hard drive crashed while I replaced it. I am trying to use the recovery disk to take the computer to the "out of the box configuration.

    I chose to 'recover' rather than erase the hard drive based on this choice. Then it copies the files from the first disc and pushes me to the second. After putting the other continues to copy files. Finally, she moves more to 'recover now' she does and seems to be using the hard disk newly installed something between 35 and 50% of the task. At this point, I get an error message stating "error recovery" and invites me to press ok to shut down the computer and spits out the CD. The error message is coded 10-FC12-0002. I tried 4 or 5 times with the same result.

    Am I supposed to use disc erase first, and then use the recovery mode since it is a new hard drive? Or I have a defective recovery disc?

    Any comments or ideas would be greatly appreciated, I do not get the case at this stage.

    Hello

    It's not easy to tell if it s a recovery disk problem or if the new HARD drive is the problem. Have you tested a Microsoft disc for example? If the disc of Microsoft is, it seems that your recovery disc is noisy and needs to be replaced. Otherwise the new drive HARD cause this problem.

    Check this box to determine the cause of this problem!

    Good bye

  • Why Age of Empires 2 does not work on my Satellite P200-144?

    I have a Satellite p200-144.
    I can't get to run, aoe2 something about directly?

    Hi mate,

    After things to do 2 AOE will continue to operate:

    -go to the microsoft website and download the latest version of directx. Download and install it.
    -go to the toshiba driver download site and download the latest graphics driver (if available). Download and install it.
    -go to the microsoft Web site and search for some updates for the game. Download and install it.

    Should help and make the working set...

    Welcome them

  • Satellite P200-144 - where can I get a recovery disk?

    Hello

    I tried to reformat my laptop, but I lost the CD that came with the laptop...

    Is there anyway that I can get a new one? Or anyway I can reformat without the CD?

    Thank you
    James

    Hi James

    Have you tried this page?
    https://backupmedia.Toshiba.EU/landing.aspx

    Here you can order the recovery disk.

    But just a question; Why you didn t create the tool preinstalled called creator of recovery disk Toshiba?
    This tool is designed to create a clean recovery disc.

  • Satellite A200 - recovery disk problems

    I just bought the (all new store big tech) Satellite A200 for a few months and not used because I was on business trip to take. This weekend, I opened it up and running for a while.

    After that I read the manual and found that I need to create a recovery from the tools provided disk. However, the problem start here:

    1. when I click on "Recovery Disc Creator", a message is display "no HDD Recovery area!, the toshiba Recovery Disc creator cannot be launched."

    2 then I call center service support and to inform that there is a problem with the "recovery disk creator" and I have to retrieve the laptop using the hard drive partition recovery (waiting when 0 turning on the system) and the next step is complete:
    a. the laptop's boot in the recovery screen function.
    b. when I try to "restore windows PC" (option 3), it is display and error message on file not found.
    c. when I try to click on "restoring the recovery disk" (option 5), it asks me to put in the recovery disk which I do not have?

    NOTE: I'm sure that the hidden recovery partition is therre. 1.46 GB. There is no way that I can access the hidden partition from a normal windows vista screen (without drive letter).

    Then, I called the support center again (now what difference person support) and to inform you that:

    1. my recovery partition is corrupted and I need to get the recovery disk again (which I did not), it's going to cost me AUD $66 (I got from HP one and cost me AUD $15 and will be free if I come and Pick-up) for administrative costs. And it is a procedure.

    2. I explain to the support staff that it is brand new in the box laptop and I consider it as defective on arrival (DOA or FOA.

    3. I also ask what causes the problem and has been a consultant with the following reason:
    a. I may have deleted the partition accident (impossible because I still can start on the recovery partition, but can not recovery which all).
    b. There may be a virus infect in my laptop which was remove my recovery file in the hidden partition (ridiculous, you can delete some files in the drive on which you cannot yet access).
    c. I should create a recovery disc when the first time LAPTOP computer service. Which it is recommended, I get a question that if I do not, or I forgot to do so, this means that the software will automatically delete the system restore image file? I have no answer for that.

    State (when I try to post this messgae), I'm still waiting for the staffs of complaint call fomr back (very tie when you talk in support of service these days).

    NOTE 2: I would like to raise these issues, not because I want something (I do both IT support) complaints but I just want to solve the problem:

    1. is there some sort (software) allow me to access the hidden drive in and out of recovery disc image, my laptop still have the partition.

    2. is there a link I can download image recovery (in iso format) disc again? I've known it is not a question of wise, but when I ask the support staff that can re - install windows vista with the license key from the bottom of the laptop and has advised that it is not work or turn on.

    3. is there someone out there has similar problem

    Hi Thomas

    I have a European model A200 (don t know what you model is) and the A200 was NOT equipped with the option of HARD drive recovery! This means that you cannot create your own recovery disk!
    My laptop came with the Toshiba Vista recovery DVDs!

    Still is it that your 1.46 GB hidden partition is not the Toshiba recovery partition but Vista hidden partition. It contains the WinRE files that are useful for repairing the operating system if something will go wrong!

    Second, the Toshiba Recovery folder is too big for the partition of 1.46 GB!
    So it is not possible that it would be placed on this s partition!

    So finally, it seems that you will not be able to create the own recovery disk and therefore, you have to order it from the ASP in your country.

    Welcome them

  • Satellite L300 - product recovery disk hangs on step 2 of the installation program

    The product recovery disk will not work, it hangs on step 2 of the installation program.

    Help appreciated

    Hello

    Do you mean you cannot create the recovery disk or do you mean that you cannot complete the installation of recovery procedure?

    If you can not finish to create the recovery disk, then you must test different drives from different manufacturers. In most cases, this helps

    I m with Verbatim DVD-R

Maybe you are looking for