Installation of the Active Directory Management Gateway Service

Help!

I tried to install this on one of my Dc Windows 2003 Service Pack 2, Dot Net 3.51 and the necessary of KB. I desperately need the cumulative hotfix package that is mentioned in this article (https://support.microsoft.com/en-gb/kb/969166), so I can complete the installation. I desperately need this and sent by e-mail to Microsoft, but don't think I'll hear in the necessary time scale. I could cure it by installing dot net 4, but the company will not authorize the change this year. I wrote a powershell scripts to automate migration and don't have the time or skills to do it again in VB by Monday, any help gratefully received

I get the following error message-question

When you try to install the Active Directory Management Gateway service, the installation fails with the error "update does not apply to your system".

This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
*

Tags: Windows

Similar Questions

  • Active Directory Management Gateway Service - installation problem

    I need a 2008 field test environment to serve as a playground of PowerShell, so I loaded Virtual PC and have created two test computers.  A load with Windows 2008 Server Standard Edition, 32-bit.  The other is Windows 7, 32 bit.

    The 2K 8 machine is dcpromo had to a domain controller.  The configuration required for the loading of ADMGS is whether Services in field of directory running Active (which is), and there with .NET Framework 3.5 SP1.  I was unable to install ADMGS with 3.5 SP1 in place and have since installed .NET 4.0 and still can't install ADMGS.

    This machine does not have installed SP2 and is current on all windows updates.  From the link:

    http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=008940c6-0296-4597-BE3E-1d24c1cf0dda

    I try to install the Windows6 file. 0-KB968934-x 86.msu.  When I try, I get the message "the update does not apply to your system".  If I try to install the wrong version, I get a dialogue, I expect: "the version of Windows you have installed does not match the update you are trying to install.  So, I'm intrigued by the present.  I feel I meet the criteria for installation, and if I'm seeing this, other people should be too.  But I'm not finding anything seeking a response, so I'm here...

    Thanks Savan.  I didn't need to post here.  Did a search and found an existing post, which suggests this patch:

    http://support.Microsoft.com/kb/969166

    Installed this patch, even if it's for .NET 3.5 and 4.0 I installed it and I was able to successfully install ADMGS.  This patch is not mentioned here:

    http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=008940c6-0296-4597-BE3E-1d24c1cf0dda

  • My printer Dell all-in-one said that the Active Directory domain Service is unavailable?

    When I try to print the printer tells me there is no communication and that the Active Directory domain Service is not available

    Hi, Jinagroh,

    See if this helps:

    Domain Services Active directory unavailable? Unable to print in Word 2010 Starter

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Active-Directory-domain-services-unavailable-cant/8691ba4f-2657-4387-b1c0-67dcdd99eb7f

    Try to access the print administrator servers. To troubleshoot the device, try the following steps.

    1. click on start, click on devices and printers.
    2. right click on the item of the printer and click on solve.
  • SRA-store outside the Active Directory user attributes

    Is it possible to be able to store a custom user attribute, such as Mobile phone number, outside the Active Directory?

    I would like to be able to use it on the the email (an email/SMS gateway) 2nd factor authentication process.

    I would like to avoid duty or anything else in AD store or having to expose the unit to SonicWALL SRA.

    It's something that we do now with our Barracuda SSLVPN device I'm looking to replace it with this.

    You can configure a different email for OTP by user.  In admin console click on users > local users.  Change the user you want, and then click the tab linking strategies.  Fill in the email address: field.

  • Change the password for the Active Directory account that is running VMware VirtualCenter Server

    We have an ESXi5.5 environment and I was instructed to change the password of the Active Directory account is used to run the VMware VirtualCenter Server Service.

    There is a Data Source configured for a separate MS - SQL Server that is configured to use Windows authentication

    I find the Article KB KB VMware: changing the vCenter Server database user ID and password

    On the key: KEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc., \VMware VirtualCenter\DB T HE for 2 and 3 values are empty

    It is not quite clear to me if the vpxd.exe Pei command is necessary for our environment (service AD account and Windows authentication) or if it is only if SQL authentication is defined on the Data Source - would anyone have experience with this change and be able to clarify for me?

    Thank you

    Yes you are right,

    but I would suggest to stop the services first before you do the activity, it can take the old password in a few times and lock the conduit to account

    2. once the password is updated, make sure that the login account is updated (is currently running services on the specified user account or local account?)

    If it runs using the specified account, you will need to updated and restart the services.

    3. make sure that the services are running fine and observe for a while, the user account must not get locked.

    Let me know if you have any other questions

  • I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

    Hello

    I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...

    Please give the solution

    What happens when you try to connect?

    If you are able to connect using the different account, try running gpupdate/force.

    If the problem persists, you can open the discussion on:

    http://social.technet.Microsoft.com/forums/Windows/en-us/home

    What is responsible technical issues forum.

  • When you are looking for a printer I get error: "The Active Directory Domain Services is currently unavailable."

    Original title: domain Active Directory unavailable Services

    I have an HP laptop, works with Vista Business SP2, all MS etc updates Now, I get a message "Active Directory Domain Services" unavailable when I try and find the printer and cannot print to any printer, USB or a netwrok, I used to be able to. Dead in the water. I tried the trick of Notepad listed in this forum, "Run as administrator", disable the firewall, malware, antivirus, uninstall the drivers, updates re-installed, downloaded, everything. HELP PLEASE!

    Hello
     
    Thank you for the update.
    Question: There may be conflict between printers.
     
    Try the methods that you have not tried earlier and check after each method:
     
    Method 2:
    Step 1: uninstall the printer driver and reinstall the driver:
    Find and install printer drivers in Windows 7:
    http://windows.microsoft.com/en-US/windows7/Find-and-install-printer-drivers
     
    Step 2: Define any default printer and check:
    Change your default printer:
    http://windows.microsoft.com/en-US/windows-vista/Change-your-default-printer
     
     
    Reference link:
    Impossible to print or view, preview printing a Web page in Internet Explorer:
    http://support.Microsoft.com/kb/973479
     
    It will be useful.
  • by clicking on find printer displays error "The Active Directory Domain Services is currently unavailable" I am on a network home windows 8

    When I use word and the products that come with it, I get the above error message.  Then the print job does not print.  Have you tried a lot of bugs, but none have worked.  Help, please.  I'm pulling my hair out.

    Hi Ibilofsky,

    Clear printer spooler files and activate the spooler service and check if the number fixed.

    Step 1

    (a) press the Windows key + R, type "Services.msc" (without the quotation marks) in the Open box and click OK.

    (b) double click on "Printer Spooler" in the Services list.

    (c) click on stop, and then click OK.

    (d) press the Windows key + R, type %WINDIR%\system32\spool\printers in the open window and delete all the files in this folder.

    Step 2

    You must be logged on as administrator to perform these steps.

    (a) open services and right - click the Print Spooler service, and then click Properties.

    (b) under the general tab, next to startup type, make sure that automatic is selected.

    (c) if the service does not, under Service status, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    Check the status of the issue.

    It worked perfectly.

    All installed printers came instantly. No need to reinstall the printer etc drivers they worked already well before the show. It was a spooler problem.

    Thank you.

  • Firepower does not work when using the Active Directory group as a rule filter access control

    I am PoV of Cisco ASA with the power of fire with my client. I would like to integrate the power of fire to MS Active Directory. Everything seems to work properly.

    -Fire power user agent installation to complete successfully. Connection to AD work fine. The newspaper is GREEN.

    -J' created a Kingdom in FireSight and you can download users and groups from Active Directory.

    -J' created a politics of identity with passive authentication (using the field I created)

    -Can I use the AD account "user" as a filter in access control rule and it work very well.

    However, if I create the rule of access control with AD Group', the rule never get match. I'm sure that the user that I test is a member of the group. Connection event show the system to ignore this rule and the traffic is blocked by the default action below. It doesn't look like the firepower doesn't know that the user belongs to the group.

    I use

    -User agent firepower for Active Directory v2.3 build 10.

    -ASA 5515 software Version 9.5 (2)

    -Fire version 6.0.0 - 1005 power module

    -Firepower for VMWare Management Center

    Any suggestion would be appreciated. Thanks in advance.

    Hello

    You should check the download user under domain option. Download the users once belonging to a group is specified on the ad and then test the connection.

    Thank you

    Yogesh

  • Adding vMA server to the Active Directory domain

    I followed the instructions for adding my vMA to Active Directory server. I see the computer object in AD and a query of vMA looks good, but when adding, I get the warnings below. Can someone explain these warnings and what that if all I have to do to fix?

    [vi-admin@VMA ~] $ sudo domainjoin-cli join xxxx.com d-user
    Password:
    Join the AD domain: xxxx.com

    With the DNS name of the computer: vma.xxxx.com

    [email protected] password:
    Warning: Unknown pam Module
    The same PAM module cannot be configured for the service of wbem. This service uses the module ' $ISA/pam_unix.so ', which is not in this list of the known modules program. Please same technical support by e-mail and include a copy of /etc/pam.conf or/etc/pam.d.

    ATTENTION: An error may be resumed has occurred during the processing of a module
    Even if the "pam" configuration has been completed, the configuration has not completely finished. Please contact support as well.

    SUCCESS
    [vi-admin@VMA ~] $


    [vi-admin@VMA ~] $ sudo domainjoin-cli query
    Password:
    Name = vma
    Domain = XXXX.COM

    Name unique CN = VMA, VMware = OU =, OU = XXXX, DC is XXXX, DC = COM

    [vi-admin@VMA ~] $

    It's actually quite normal, I guess, this is the version still using VMware is not compatibility with WBEM (Web - Based Enterprise Management) based on the warning message, I'm not sure if this will be fixed in a later version or a newer version of the same set. As far as I know, it does not affect the integration of commercials with vMA feature.

  • Replication of ACS and integration with the Active directory database

    Hi all

    I have to configure two ACS SE with the internal database replication. I have also a server active directory that must integrate with ACS. My doubt is that I need to configure the IP address of the ACS during installation of the remote agent on active directory or only the primary ACS

    No need to give the IP of two ACS. Give the primary IP of ACS.

    Kind regards

    ~ JG

    Note the useful messages

  • E-mail notification triggered during the reconciliation of the Active directory trust

    Hello

    When we run the scheduled task of reconciliation of trust user Active Directory, the user gets created by IOM and sends a notification to the user to create . But, if there is no change in Active Directory for the same user (any attribute changes) and we run the recon work trust, will be change also trigger an email notification?

    I mean, is that the notification of the user to create triggers the user and Manager too?

    During the reconciliation of trust, generated notification is to create user... is it good?

    I searched a lot of places, but could not find any appropriate entries. Please provide some input?

    Thank you

    No, during the change won't email notification.

    Creating trusted users, suite of property gets used:

    Must send notifications in recon or not

    Determines whether the notification is sent to the user in the user login and password are generated in the event handler postprocess for the creation of the user through reconciliation of the trusted source.

    If the value is set to true, then notification is sent when the user name and password are generated in the event handler postprocess for the creation of the user through reconciliation of the trusted source.

    If the value is set to false, then notification is not sent when the user name and password are generated in the event handler postprocess for the creation of the user through reconciliation of the trusted source.

    Recon.SEND_NOTIFICATION

    true

    If you want to send messages during the recon trust (update/changes), you must write your own code to java of notification, FYI: http://www.ateam-oracle.com/oim-11g-notifications/

    ~ J

  • Update of the Active directory through IOM domain

    Hi all

    I have configured AD with IOM. The user is getting stocked with AD.

    But if I make a few changes in the profile of the user as city, post office address, country, they do not think in Active Directory.

    On the other hand, if I change my name, name, username, then these fields are translated into Active Directory.

    Why it's happening?

    Can someone please explain this to me? And how do I get my first requirement either update the city of e-mail, zip, country, etc..

    Thank you very much in advance!

    Waiting for your answers!

    Process triggers
    A quick definition of two variants of the process triggers, it should be noted that triggers run only a process task, that they do not have anything else, if you want forms or resources to be updated it is the function of the adapter to process task.

    User profile triggers
    These starting from changes in the user profile. The 'Lookup.USR_PROCESS_TRIGGERS' table defines the fields in the user profile have triggers and which deal with the tasks they will undertake.

    Form triggers
    These from service users changes to a form of process associated with a resource. Triggered tasks are defined by name only and should be named after the form field that you want to that they apply, with the suffix 'Updated' for example 'city updated '.

    Please note that the data on a form of resource process will not change by changing the user profile only, usually the task named as the trigger of profile task can be used to change the value of process. If you change the shape of course, in this way, then the task of form subsequently trigger, and you can make a change to the resource of the change in the form.

    To get a user based profile trigger to work just to extend the table of Lookup.USR_PROCESS_TRIGGERS and create the task you name in this table in a process of resource definition. Even if the task doesn't a change in the user profile will trigger the process task corresponding to the resource for this user.

    Kind regards
    Ian

    Published by: user809225 on November 28, 2008 03:25

    Published by: user809225 on November 28, 2008 03:32

  • TENS of installation in the application directory--> cannot find directory RTE

    Hello

    I couldn't find an answer of fitting about my problem using search, so I'll try my luck by asking.

    First of all: I'm using Labwindows/CVI 8.5

    I created an installer for my application using the Distribution Kit Wizard. Under the tab drivers & components I chose only the 'standard Run-Time'.

    On the Advanced tab, I left the option "Install Labwindos/CVI Run-Time Engine in the application directory" unchecked.

    This installs and works fine at my PC clients.

    Now the problem:

    My client does not want that all files are installed in the Windows\System32 directory...

    So I checked the option "Install Labwindos/CVI Run-Time Engine in the application directory" and created a new installation routine.

    This installs fine and the cvirte folder is also be copied into the directory of the specified program and not Windows\System32... but now whenever my client tries to run the application, it gets called with the following messagebox:

    Cannot find the directory RTE:

    C:\Windows\system32\cvirte

    Which is actually very good, because I wanted to RTE must be installed in the folder of my program, but somehow my request is always pointed toward the search in system32.

    Is there a way to fix this without copying the RTE in Windows\System32 again?

    Given your explanation, I can understand why you see the error message. When you try to locate the resource (bin) and directories of fonts, DLL RTE search in the directory of the process that loaded, then in the system directory. As RTÉ is not installed in one of these locations (instead, it is installed in the same directory as your DLL file), we do not find the directory "RTE". There is nothing particularly wrong with what you're trying to do, except that we can't do well. I'll drop a request to fix this for a future version. In the meantime, you have a few options:

    1. let the RTE to install in the system directory, as it normally would.

    2. manually copy the directory cvirte of your repertoire of the DLL in the system directory.

    3. ask the client install your package DLL in its application directory. The target directory can be changed by the customer at the time of installation.

    I know these aren't the major options. I personally highly recommend the first option, despite protests from your customer. Is there a good reason that it is forbidden to use the system directory?

    A. Mert

    National Instruments

  • problem with DNS on the active directory server unique

    I have a client that I'm having a problem with DNS that they do not have active directory structure.  I tried just about everything and at my wits end.  Customers can get online, but the problem is that they cannot see the DNS.  Any help would be much appreciated.

    Ask in the forum Windows Server:
    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

Maybe you are looking for

  • Lost all data user randomly.

    I lost all my Firefox data this afternoon. I can have just restarted from a BSOD in Windows 7 (don't remember). When I started Firefox it open the bookmarks import prompt and all 3 of my profiles have disappeared. I don't have my 3 profile folders in

  • Bug in the accessor class data member with name return

    Noticed a small bug in creating data classes accessor member. If you have an in the variable title carridge return the vi it creates will not save.

  • I can't figure out how to open the box of recipe on the carousel to add a recipe.

    I have touchsmart 6500 with windows 7. When I opened the canvas that has the carousel, I touch recipes, so how can I add a recipe? What affect that which opens? I watched the tutorial that showed the calendar, but there is no way of receipts. I know

  • Connection to the meter via LAN without VISA library

    I connect my HP33410A via a LAN cable to my PC using the VISA library. I'll send SCPI commands and everything works OK. But my application must also connect without a VISA and for me it's a big problem. I read some information, I have to use the SOCK

  • Reset password-HELP!

    Recently, I started my dell inspiron windows vista system, after that it is out of service for a few years. I can't NOT memorize my password and no longer have the disc that came with it. I moved, and we don't know where he is. Is it possible that I