Installation of the elements on the new laptop 10

Similar Questions

• CS4/5 installation on the new laptop without disc?

  I'm picking up a new laptop PC, this afternoon and I plan on disable and remove my old laptop for CS5. I have CS4 originial records, registered, and the disks to upgrade to CS5 (the two Design Premium, if this allows everything), but the new laptop doesn't have a hard drive. What is the best way to install CS on the new laptop computer?

  In addition, I should start by installing CS4 and follow the update? I don't remember exactly what, but I remember running on some issues when I did it first about 3 years ago (and have had error messages resulting from so I want to avoid on the new computer).

  Thanks in advance.

  No, you just install cs5.  you will be prompted for the serial numbers of your cs4 and cs5 upgrade.

  If you follow the 7 steps, you can dl a trial through one of the links on this page: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  and activate it with your serial number.

  If you have a problem with dl, you don't follow all 7 steps.  as a general rule, do not carefully follow the steps 1, 2 or 3 is the problem.

• Why can my new installation on the new laptop I register not correctly on my account?

  I downloaded and installed Photoshop on my new pc.  I have connected to my Adobe account and - of course - disconnected all previous installation on both old 2 PC, but every time I start using PS a window pops up saying that the trial period is over and ask me to access and connect to my account.

  What is the problem? (my annual subscription is of course still running...)

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

• Problem with CS6 installing on the new laptop - 'SN is ok, but your software is probably illegal.

  I have an urgent problem with the Suite Design Standard CS6 installation on the new laptop - comment: "SN is ok, but your software is probably illegal". Software has been disabled on the old laptop. Help, please. Thank you. Marek

  We cannot help with this type of problem on the forums. Serila number questions should be handled by the customer service: Customer Contact

• I want to install my office small business 2003 on my new laptop but can't find the installation cd. I have all the license information. Can Microsoft help me to make it work on the new laptop? Thank you.

  I want to install my office small business 2003 on my new laptop but can't find the installation cd.  I have all the license information.  Can Microsoft help me to make it work on the new laptop?  Thank you.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon. Mick Murphy - Microsoft partner

• Installation upgrade memory in the new laptop (E8730w)

  I just got my new laptop and was dismayed to see that I obviously have to install the 2 GB memory upgrade that I ordered.  When I'm ready to install it, I will contact HP technical support.  I'm interested in the big picture right now.  The laptop has installed Windows Xp and Vista, stored on the hard drive.  No matter if I use the new laptop for, say, from the user's manual before as I have added additional memory, or is it better not to use the laptop until I have all of the memory (2 GB original and 2 GB upgrade) in place.  I hope that this process will be no more complicated than to install an ethernet card in a years office 5 or 6.  Where can I get good screwdriver to open the module compartment memory?  From my experience, it is easy band, the head of a screw phillips, especially a small head, if there is no appropriate screwdriver.  I'd appreciate any idea on these issues.

  I don't think that no matter how long you use it before you install the memory. Regarding the screwdriver, I use a 41678 artisan to work on laptops with screws Phillips. It could cost $ 1.69 at any Sears and any tech tools for perhaps $15 will be a very similar small Phillips. You will know if you are stripping it, so stop everything. Memory installation is much easier than to put a PCI on a desk. Relax its all good.

• How can I transfer my photo files and catalog items on my old laptop to the elements on my new laptop?

  Can I transfer my photo files and catalog items on my old laptop to the elements on my new laptop by simply copying manually on? or is it best done important photo files using organizers "Import" function together with function catalog restore?

  A response to clarify this would be appreciated

  Photoshop Elements help / use Backup, Restore to move the catalog | Organizer | Elements of 6 or newer.

  http://helpx.Adobe.com/Photoshop-elements/KB/backup-restore-move-catalog-Photoshop.html

• Working Group stopped after the installation of the new wireless router

  My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

  I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

  I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

  WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network path was not found.

  I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

  What version of XP you use (Home or Pro)?

  Can you access the Win 7 a XP computer?

  You have identical accounts, passwords on both computers?

  If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

  So... What is the name and version of your anti-virus program?
  What other security software is installed?

  On every laptop computer, open a command prompt window
  for XP: start > run > cmd > OK
  for Win 7: type cmd.exe in the search box and press enter
  In the black command prompt window, type the following command and press enter
  ipconfig

  Please provide the values for the following for the adapter wireless of each computer
  IP (XP)
  IPv4 address (Win 7)
  Default gateway

• Cursor not moving/working after the installation of the new keyboard

  I just finished replacing the keyboard on my HP G72 due to spill water on the keyboard a few days ago & some keys no longer work after laptop parched. However, I find that things are not as they should because I can't get the cursor to move. I do not use a mouse & rely on the touchpad. I tried to remove the keyboard & reinstall several times but all about no. avail & wonder if anyone can give me some advice, even if it is the keyboard itself may be defective & I need to buy a new one. I don't want to just assume there is a problem with this new keyboard only to discover that the problem is somewhere else & that there is other things I should be doing or trying.

  I had to install a new keyboard on this computer laptop sometimes last year afer having a similar accident with the flow of the water, but the installation of the new time was pretty much a piece of cake, I followed the guides on the screen, I have been looking & everything was perfect, once I had installed the new keyboard.

  Thank you if you can advise.

  Hello

  If possible, try a USB mouse for awhile. This way if the slider works, you can try reinstalling the drivers for the touchpad that could solve the problem. If the cursor does not work with an external mouse also then the problem could be hardware related.

  Sometimes to repeat the installation process of the keyboard all over again also helps.

• never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  never had a disc of windows vista with the new laptop and no option to make a recovery disk, and I need to format my laptop to factory / clean, help!

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their way of doing recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Re-installing Lightroom on the new laptop, keywords from images! (I think!)

  Hello

  I use Lightroom 5.2

  I spent several days it is has updated all of my keywords in LR using my old laptop. I have about 8 000 image files, mainly RAW CR2 files, all recorded on a disc toshiba external hard.

  Now I have a new laptop and reinstalled LR on this new laptop computer. I'm starting to import all image files in LR since the external hard drive, but I noticed that there are no keywords in the version of LR installed on the new laptop.

  I perhaps foolishly assumed that when I keyworded all files first time round the metadata would be saved in the CR2 file itself, such that it would be accessible by other applications, or, in this case, by a version of LR installed on a different laptop. This doesn't seem to be the case.

  I'm doing something wrong? Are there key words, but I can't see them somehow?

  I really don't go back through 8000 files and re - keyword all, it took me days!

  If all this fails, can I go back to the version of LR on my old laptop (which I still have) and somehow join keywords in files on a more permanent basis so that they are recognized by my new laptop, or are what I'd need to set it as default when first, I realized the keywording exercise?

  Thank you very much
  Tom

  But it's a brand new version/installation of LR. Then it will be a brand-new photo as much as the new version of LR is concerned, used? How they see the before image file?

  Your keywords are in Lightroom, more precisely, they are in the catalog file. You must transfer the catalog file, as described in the link I provided. Import photos is not the way to do it.

  I tried to work through the tutorial you linked to, but I'm stuck at step 4: transfer. For example, he says to transfer the catalog, etc.. But I'm not transfer anything I am? I just have to say the new version of LR where to look to find image files...

  You MUST copy the file from the catalog to the new computer. Then, although it is a new installation of Lightroom, you MUST use your existing keywords with catalog. That's the key, you MUST use the existing catalog file.

• I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  I have 12 EP on laptop that is now replaced by a new one.  He cannot find download for even for the new laptop.

  When I twirl open the PSE12 option I see English. When the download is complete, you usually select the language when starting the installation.

• I have CS5. got a new laptop and transfer to the new laptop, but it asks me the serial number.  How can I find that?

  I just bought a new macbook pro.  You try to transfer my CS5 applications for the new laptop, but it asks for a serial number.  How can I find my serial number on CS5?

  Elias

  If you need to find your serial number for a product not creative cloud that you saved before, start by logging into your account Adobe. On the page for managing accounts that appears, all of your registered products and their serial numbers are listed in the section Plans & products. For more information about the location of the serial numbers, or on registration of a serial number, please see find your serial number quickly.

  You must install files installation rather than transfer, restore, or copy of a program.

  After you download here: Download CS5 products

  Please see the instructions to extract the files and install your product.

  Alternatively, you can download it here:

  http://prodesigntools.com/all-Adobe-CS5-direct-download-links.html

  Guinot

• Cannot save CS3 on the new laptop computer

  I have my cell die. Ld office expired last year and I called Adobe to deliver anything that prevents me to install again and they said they did. I never had time to installation on the new tower because I used the portable more. Now, the laptop is dead. So I buy a new laptop brilliant and install CS3 on it and that's... CS3 will not fit. Made a post that I have an answer telling me to use a cleaner program. I installed a new installation on a new laptop. I had no problem installing office, but CS3 not so much. I just decided that adobe doesn't care once they have your money. If I install later and more I bet I could get help, but I don't need. I am retired and just a few things. My wife is always using PageMaker and he does what she wants, so it is not updated. I don't ' want or need State of the art, I want just that CS3 to work on my new laptop windows 7. Yes, you can always buy a laptop with a decent OS if you shop at Costco. You can not just get your CS3 to work on it. I guess that the answer will be that I have to pay for the support for using my software. I'm frustrated, will you?

  You shouldn't save CS3 if you have already registered it in the past.  If you mean that you are not able to activate it, then maybe it's something you can help with.  You will need to contact the Adobe Support for help with activation using cat.

  Serial number and activation support (non - CC) chat

  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

  Support of Adobe ID and registration of chat (non - CC)

  http://helpx.Adobe.com/x-productkb/global/service-C1.html ( http://adobe.ly/19r6ZDp )

• CS4 programs transferred to the new laptop

  The laptop on that initially charged Suite CS4 dead. Bought a new laptop at Micro Center. They transferred programs and data in the new laptop. I tried to use Photoshop and DreamWeaver, but get the error code 147,20.

  Micro Center told to contact Adobe.

  I bought CS4 Suite while studying at JCCC 5 years. What do need me to get the program to work on my laptop replacement?

  You must install the software, transfer does not work well.  You will need the serial number of your purchase to activate the software after installation.  You need floppies installation of your purchase, in order to install, and if you don't have the disks, then you can download the trial through the page linked below.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS3 and CS4:

  http://prodesigntools.com/download-Adobe-CS4-and-CS3-free-trials-here.html

  You may have disabled original activation, especially the case if you had it installed on more than one machine.  To do that you must contact Adobe technical support directly through chat or by phone.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/