Installation of the enclosure OR USB - 6259 Visual C++ Runtime Library Runtime Error

Similar Questions

• After the installation of Trend Micro Titanium Maximum Security 2011 Visual C++ runtime error

  I installed Trend Micro Titanium Maximum Security 2011. I restarted the laptop, there is an error message:

  "Visual C++ runtime error.

  The Application requested execution to terminate in an unusual way.

  Laptop would be hanging there & not procceed further. I had to restore to the already known good restore point. I've experienced & concluded that Trend Micro creates a problem.

  A fix for this problem?

  Vishal

  
  

  This can happen when a previous antivirus product was not completely removed. Use the cleaning of the previous antivirus tool.

  Contact Trend Micro Support here http://support.antivirus.co.uk/trendmicro/kbsearch1.jsp (you may need to change this for your country)

  Trend Micro forums may be able to help http://community.trendmicro.com/

• Abnormal termination of the program Microsoft Visual C++ runtime error

  Whenever I try to install Rosetta Stone "Of the program Microsoft Visual C++ runtime error abnormal termination" is displayed. I tried Microsoft fix the thing but it does not work. Someone please help. I get the message when I download the program on the website of the Rosetta Stone. I can install it with the cd but when I run the program it does not come to the top and the compatibility mode will not work. The program is compatible with windows 7, but my computer says it is not.

  A runtime error is a software or hardware problem that prevents a program to function properly. Runtime errors can occur if you are running two software programs that aren't compatible, if your computer has memory problems, or if the computer has been infected by malware.
   
   
  Therefore, I suggest you to check if there are recent updates available for the program from the manufacturer's website.
   
  Contact the xxxxxxxxx support for assistance on this issue.

  This type of error can be caused if the Visual C++ library runtime components are missing or because of a third-party software.

  Follow the steps below:
   
  Method 1:
  If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the link below:
   
  This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.

  Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.

  (a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.

  (c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.

  Step 2

  If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Let us know if that helps.

• Error__Runtime Microsoft Visual C ++ Runtime Error! C:\Program Files (x 86) \Internet.exe __This Application asked the execution in an unusual way. __

  I am trying to download pictures to ebay for the first time.  When I hit the Browse button and go to my pictures, I get the following error message;

  Microsoft Visual C++ runtime error
  Runtime error! Program c:\Program files (x 86) \Internet Explorer\iexplore.exe
  This application has requested the execution in an unusual way.

  Thanks in advance for any help!

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/threads

  Try asking your question of IE in the Internet Explorer Forum.

  See you soon. Mick Murphy - Microsoft partner

• A box of error with Visual C ++ Runtime error on the top and the assertion then error line 267 program appears

  Original title:

  How can I get rid of this 'box', he said Visual C ++ Runtime error on the top and the assertion then error line program 267: file_common_npngate blah blah

  Expression pPlugin Shim? I uninstalled Reg Pro and the other antivirus that both are installed on my computer. Someone at - it get this message before? What should I do? I am still able to run normal programs, but this error continues to repeat itself, I continue to close, and then I get again.

  Ali

  Hello

  1. when exactly you get this error message?

  2. what browser do you use?

  3. If Internet Explorer, what version of Internet Explorer is installed on the computer?

  4. are you aware of any changes made to the computer, before the show?

  A runtime error is a software or hardware problem that prevents a program to function properly. Runtime errors could cause you to lose information in the file that you are using, causing errors in the file (corrupt the file) so that you cannot work with it, or prevent you from using a feature.

  If it does not solve the problem, try method and forward them to the following, following.

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once you have determined the problem by using a clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  If you get this error in Internet Explorer, try the steps in troubleshooting mentioned in the following link.

  Correct errors in Internet Explorer

  http://support.Microsoft.com/kb/822521

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  
  Method 3:

  Download and install the latest versions of Microsoft Visual C++ and are looking for the issue.

  For the 32-bit version of Windows Vista:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5555

  For the 64 bit version of Windows Vista:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=14632

  I hope this helps.

• OneDrive of browsing for the file of the company is blocking explorer.exe with visual c ++ runtime error

  I posted this in the OneDrive for business forums and was told to come here because they were not able to climb it - a few other people responded saying that they had exactly the same problem.  I copy + paste the original message here.

  OK, now let me preface this by saying: I was fix this for the better part of a week and I am puzzled.

  I work in the it Department for business (~ 200 employees) medium, we have recently migrated our the server local exchange to Exchange Online (we are now using a mixture of licenses Office 365 E1 and E3) and we have since then all members of society with their synchronizations of OneDrive.

  About 200 people, that we have put in place, there is a person who has this problem - when he opens the file Explorer and looks in his folder OneDrive @ company, less than a minute, it will get a Visual C ++ runtime error and explore crashes / restarts and is able to work again.  Of course, within a minute, the same thing happens. It is under windows 7 x 64.

  This particular user has a mixture of files .dwg-AutoCAD, PDF, word/excel files and jpg files on his onedrive for a total amount of approximately 7 GB.  It uses the preview in the Explorer pane, and I saw a similar problem during its use in the past, so I applied the patch and it did not help.  If I disconnect his onedrive and move his files back in its documents folder, it can browse its files without any problems whatsoever (including using the preview pane).

  want to hear the best part?  I set him up on a laptop quite different from ZERO and it does EXACTLY the same thing!  No one else in the company is having this problem, and almost every other laptop that we deployed using the same exact configuration.  I'm starting to think, it could be a problem with his records, but I'm not sure - go to synchronize its reader to my computer to see, even if I'm on windows 8.1.

  Everyone knows about this type of problem?

  Also, I already tried to delete the cache of records office and completely reinstalled onedrive on the original computer.

  This is clearly a problem inherent in the OneDrive itself.  Let me know if any kind of logs are needed.

  I could never get anyone to help me here so I ended up spending the user assigned to windows 8.1 and it helped.  Sometimes it happens again but windows 8 is much better at handling explore crashes, so it's just a quick blip and he is back at work.

  Good luck.

• First elements 11 - anyone know the fix?  -Microsoft Visual C++ Runtime Error

  Microsoft Visual C ++ Runtime Error - closing of the premier 11 elements

  In my view, there are fixes out there for Photoshop elements, but cannot find the fix for Prime Minister 11 elements. Anyone know where it is?

  Alex7777

  Which operating system do you use first 11 elements? For now, I'll assume Windows 7, 8 or 8.1 64bits.

  1. delete the Adobe Premiere elements Prefs file and, if it does not, remove the whole 11.0 folder in which the Adobe Premiere elements Prefs file exists.

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  11.0

  and in the 11.0 folder is the Adobe Premiere elements Prefs file that you delete. If this does not work, you delete the together 11.0 folder in which the file Adobe Premiere exist. Don't forget to work with folder Option show hidden files, folders and disks active so that you can see the full quoted path.

  2 uninstall/reinstall according to the following specific

  a. disable the program in an open with Menu on/off project help

  b. uninstall the program in the usual way of Control Panel

  c. a free ccleaner Cross (parts regular cleaner and registry cleaner) to get rid of remnants of incomplete uninstalls reinstalls

  d. Resinstall with antivirus and firewall disabled

  The Adobe document that makes the Microsoft Visual C++ runtime error

  Solve the C++ runtime errors. Adobe products | Windows

  Please consult the bulletin and review, and then let us know the result.

  Thank you.

  RTA

• Error when installing msn program: Microsoft Visual C++ Debug Library Debug Error ProgramC\ProgramFiles\MSN\MSNInstaller\msniadm.exe

  Original title: Microsoft Visual C++ Debug Library Debug Error ProgramC\ProgramFiles\MSN\MSNInstaller\msniadm.exe

  I am trying to reinstall MSN on my computer - XP Professional - and I get the following installation error message

  MICROSOFT VISUAL c ++ DEBUG LIBRARY

  Debugging error

  ProgramC\ProgramFiles\MSN\MSNInstaller\msniadm.exe

  Abnormal end of program

  Please retry to debug the application

  The program and the installation ends when I try to start again

  What can I do to reinstall successfully the program MSN? Thank you!

  edited for the protection of personal information *.

  Hi Richard,

  One thing to try is that you can try to reinstall the Microsoft Visual C++ Runtime from here
  In addition, background apps can actually interfere with the installation of MSN, try to perform a clean boot to see if there are programs in conflict
  See you soon ~
  PS - MSN Support is very limited. Do not rely on them

• Windows 7 has encountered a Microsoft Visual C ++ Runtime error.

  Computer Toshiba laptop running Windows 7 Ultimate met a Microsoft Visual C ++ Runtime error. The problem is that there is no access to the computer just a blue Windows screen that says Windows7 Ultimate. In order to download a fix I need to get on the internet unless there is another way. Please notify

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.

• Microsoft Visual C++ RUNTIME ERROR

  Hello

  If I leave my PC on but unattended for a few moments, I come back to find up to 50 Microsoft Visual c++ Runtime errors saying "R6030-CRT not initialized." It does not allow me to close the error messages individiually, or group, but I have to turn of the computer competely and turn it on again.

  any ideas how to solve this problem? has only started happening in the last 14 days after an automatic update of windows.

  any help appreciated

  Thank you

  Gordon

  Hi Gordon67,

  1. using Microsoft visual Studio 2005?

  2. not this problem occurs when you run any application and let idle or unattended?
                        
  Method 1: you should first try safe mode and check if the problem persists.
            
  Follow this link provided below to start your computer in safe mode.
         
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
     
  Method 2: If the problem does not recur, then I recommend you perform the clean boot.
      
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
     
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
      
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
     
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
     
  Method 3:
      
  You can also use Event Viewer to search for information on the problem.
     
  Here is an article on how to do it:
   
  The display of the error messages in the event viewer
  http://support.Microsoft.com/kb/947321
   
  You can see for more information on the issue at the time where it occurred.
        
  You can post this information here to help us narrow down where the focus.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Library of visual c ++ runtime error message microsoft when you install the Backup Exec Server 2010 continues to protection on Windows storage server 2008

  When I try to install the Backup Exec 2010 Continuous Protection Server on Server Windows storage server 2008 I get error microsoft visual c ++ runtime library error. Runtime error! The setup.exe has put an end to this application has requested in a medium unusaul.

  Hello

  Your question is better suited in Windows server on TechNet. Please post your questions here.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• I still have a problem with the error message: "Miccrosoft Visual C ++ runtime error."

  I ran a boot; the error message does NOT appear.
  I was not able to understand what triggers the error. It comes at all different times, often after that I worked on the Internet for several minutes.

  I suggest that you manually download and install Microsoft Visual C++ 2005 and 2008 Redistributable Package and check to see if you can install the software.

  In programs and features, you do not show that you have installed Microsoft Visual C++ 2005 Redistributable and Microsoft Visual C++ 2008 Redistributable? If this is not the case, download the links here.
   
  Package redistributable Visual C++ 2005 (X 86)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=32BC1BEE-A3F9-4C13-9C99-220B62A191EE&displaylang=en
   
  Visual C++ 2005 (x 64) redistributable package manager
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=eb4ebe2d-33c0-4A47-9dd4-b9a6d7bd44da&displaylang=en

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

  Package redistributable Visual C++ 2008 SP1 (x 64)
   http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=BA9257CA-337F-4B40-8C14-157CFDFFEE4E&displaylang=en

  Once installed and updated, please let us know if you still receive the runtime error message.

  Thank you

  Marilyn

• How to get rid of Microsoft Visual C++ Runtime error at startup. Sometimes after that I turned on the computer before you open any program.

  Once I turn on the computer and before I opened a folder/file/program.

  The box says;

  "Runtime error!"

  Program: C... »

  So I have no idea what program it is. As I know there has been no new program loaded, but it's my wifes computer, so I can't be sure.

  Hello

  Try these methods and see if it helps.

  Method 1:

  Step 1: Start in safe mode and check if you get the error.

  Refer to this link for help:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: Clean boot

  Perform a clean boot to verify if a third-party program or service is the cause of the problem.

  Refer to this article for more information:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Steps to perform a clean boot:

  a. click the ORB start on your desktop
  b. type msconfig in the search box and press ENTER.
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  c. in the general tab, click Selective startup.
  d. under Selective startup, clear the check box load startup items.
  e. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  f. click OK.
  g. When prompted, click on restart.

  NOTE: Please check that you start your computer in normal mode when you are finished troubleshooting. Followstep 7 of the article mentioned above.

  Method 2

  I suggest that you try to run the System File Checker and see if it finds all of the corrupted system files.

  (a) click Start

  (b) type: CMD, according to the results, right-click CMD

  (c) click 'run as administrator '.

  (d) at the command prompt, type: sfc/scannow

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Microsoft Visual C ++ Runtime Error - can not see the path of the file.

  When I get the runtime at startup error, I don't see the destination of the file. It is very annoying that I can not see the program that gives me the problem.

  All it says, this is:

  Runtime error!

  Program: C:\Program F...

  How can I extend the above so I can see the path of the actual file?

  Also going to go for a 2 for 1 here...

  Immediately after the closure of the runtime error box, I get the message that search settings stopped working.  I close who and everything is fine until I reboot (by making the error happen) but I'd rather not have the problem in the first place.  I run Windows 7 Ultimate.

  Error information:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: SearchSettings.exe
  Application version: 4.5.0.2
  Application timestamp: 4e04ab86
  Fault Module name: MSVCR90.dll
  Fault Module Version: 9.0.30729.4940
  Timestamp of Module error: 4ca2ef57
  Exception code: 40000015
  Exception offset: 0005beae
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033
  Information additional 1:9956
  More information 2: 995611374799875ff43c42d4b1b84d70
  3 more information: 3d4b
  Additional information 4: 3d4b4db0455ea2295d172b959897673c

  Maybe just download a new MSVCR90.dll but I would like to hear what you have to say.

  Hello

  ·         Did you the latest changes on the computer?

  We must first identify to identify the program that is causing startup problems.

  Step 1:

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode.

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  Step 2:

   

   

  I suggest that you put the computer in a clean boot state and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Windows Explorer crashes continuously on Windows 7 with Visual C ++ Runtime error

  I have recently (before Christmas) improved my Thinkpad T60p with Windows 7 Ultimate Edition.
  Everything was OK until this morning. Now whenver I launch Windows Explorer, I get a crash window saying "this application has requested execution in an unusual way.

  When I click OK, the box appears again.

  Given zero has no effect. In fact, the box appears even if I have no application running and I click on the folder button.

  Other apps seem to be running OK (it came through Firefox), but I can't access my files.

  I tried to get back to a previous restore point: to see that there are none. Apparently, the amount of the disk reserved for recovery points was set at zero (I'm not and there are 50 GB + free disk)

  I am running a check just in case virus.

  Changes only the latter were a new device driver for the LAN and wireless (Intel) Firefox 3.5.7 update

  Gareth

  Hello Gareth,

  Thanks for posting in the Microsoft Windows forum.

  Let us know what happened after running a virus scan.

  This type of error is usually related to damaged C++ components installed.

  Download and install the latest Visual C++ runtime

  Search for and then remove the existing installation of Visual C++. To do this, follow these steps:

  In Windows 7

  1. in Control Panel, open programs and features. To do this, click Start, type appwiz.cpl in the start search box and press ENTER.

  2. Locate the Microsoft Visual C++ in the list of installed programs.

  3. click on Microsoft Visual C++ and then click on uninstall

  Note If you do not have Microsoft Visual C++ in the list of installed programs, go to step 2

  Follow the steps to remove the software.

  Download and install the latest Visual C++ runtime. To do this, follow these steps:
  Visit the following Microsoft Web site: http://www.microsoft.com/downloads/Search.aspx

  In the search next to all the Downloads box, type Microsoft Visual C++ Redistributable package, and then click OK.

  In the search results, click the Package redistributable Visual C++ for your operating system.

  Note The x 86 version of the package is for the 32-bit version of Windows. The X 64 version of the package is for 64-bit Windows version.

  On the page that opens, click Download, and then save the file to your desktop.

  When the download is complete, double-click the executable file.

  Follow the instructions that are displayed. When you are prompted, restart the computer.

  If the problem persists, try method 1 clean boot and check.

  Put your computer in a clean boot state, and control.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot".

  Note When you perform a clean boot, you may temporarily lose some functionality. When you start the computer as usual, the function returns. However, you may receive the error message, or you can experience the original behavior.

  To put your computer in a clean boot state, follow these steps:

  Perform the clean boot

  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.

  1. sign the computer by using an account with administrator rights.
  2. click on the Start button, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  Note Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  5. click OK and then click on restart.

  The steps above to put your computer in a clean boot state. Refer to the link below to learn more about clean boot and follow the steps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click the Start button, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart.

  If the clean boot is little help, try method 2 SFC scan.

  The tool File Checker system to determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start
     

     and then type cmd in the box start the search .

  2. Right-click cmd in the programs list and then click run as administrator .
     

     If you are prompted for an administrator password or a confirmation, type your password or click continue

  3. At prompt command, the following line, and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Kind regards
  Aziz Nadeem - Microsoft Support