Installation of the fiber Modules

Similar Questions

• installation of the toolkit Modulation

  Hello

  I try to install the Modulation (MT) V4.0 for LV 8.6.1 Toolkit and I'm running the questions with the palette menu. The palette of digital modulation menu does not appear after installation (and not under addons or pallets of rf communication). VI Physics for digital modulation functions are located in the folder program files, but they do not appear in the menu of the palette of LV. Also, when I try to open the files of ments, Labview application lacks Subvi so I'm starting to think that something is really messed up with the installation of the Toolbox.

  For the background, I'm running LV 8.6.1 PDS with measures spectral toolkit (SMT) also installed V2.4. I uninstalled, deleted and reinstalled the SMT and MT directories several times but I still can't the palette menu or the digital modulation VI to work properly. Also, I uninstalled all previous versions of Labview to check that there is no conflict version of Labview. Has anyone else encountered this problem with the modulation toolkit and you know a fix? I would prefer not to have to reinstall all Labview 8.6.1 but if that proves to be the easiest option then I guess I have no choice.

  Thank you

  Tim S.

  Hi Tim,.

  It seems that everything has been installed correctly, so I don't know exactly why this is a not complete automatically. I think we should try to manually add to the palette. I have included a link below that describes this process in more detail, you want to reference part "V. or pallets missing icons. You want to add the digital section to the palette by pointing to the file correct .mnu located in the digital file. I've included a picture where my .mnu as reference file. This should work for you, but please post back and let us know how it goes or if you have any questions.

  Missing icons on the functions or controls in LabVIEW Palette

  http://digital.NI.com/public.nsf/allkb/46E1672AB48C917D86256AFE00075436?OpenDocument

  

• Location requirements NX5K FC port after the installation of the expansion module?

  Requirements of State Cisco "FC ports should finish the last port of the module '... I guess that means the last port of ANY module and not the last ports of the module 'last '?

  Just confirm the installation of a "n55-m16up' (16 port expansion module) in a 5548UP NX, which already has assinged CF E1/31 and ports E1/32 DONT need to relocate the FC ports in the last ports of the expansion module?

  See you soon,.

  Yes it's true. This is the last port of any module. In short, this requirement is per module. So when you put in the new module, you do not need to move your existing between module 1 fc ports

• HP Pavilion p6210pt desktop PC: after the installation of the new module of RAM PC does not start and continues to beep.

  Hello

  I am trying to upgrade the RAM on my PC. I don't know I got the correct specifications: 240 pin DDR3 PC3 - 10600 1333 MHz

  And it comes to envy, I bought, Kingston.

  The PC has 6 GB of RAM and a free slot, after I insert the new module on the free location corretly and press power, the PC does not start. It starts just a beep and the screen remains black.

  Don't know how better to explain this.

  If I take the new RAM all works normally. If I take old modules and just start by the new, the same thing happens, computer won't start not and just keeps to the beep. One of the Tweets is longer than the other, and then it repeats.

  Can anyone help please, it's just the motherboard it is too old or something?

  Thank you.

  See you soon.

  JO

  Hello

  Given that your PC works with the old DIMM modules and not the new dimm then you should contact Kingston for a cure.

• installation of the output module?

  Where is the bridge CC Extensions folder? Where will the Board contact, the medial Gallery and resources files. On line instructions Adobe not lacking!

  Move the discussion to the Bridge of General Discussion.

• Microsoft technical support can't help you with the faulty Modules Installer.

  I have pleasures with support by e-mail dated December 18 and the subject of some updates that caused the Windows Modules Installer to stop working.  Here are the steps that have been taken so far:

  1. reboot the failet installation service.

  2 direct download of Trustinstaller.exe and Trustinstaller.reg.

  3. transfer of support tech System Info of MSINFO32.

  4 Indentifcation updates specific causing the crash of the installer of Modules and make a direct download of them.

  5 reset Internet Explorer options and disabling third-party browser extensions.

  6 direct download of the tool.

  7 supply tech with screenshots of SFC.exe and CheckSUR.log.

  8 run the SFC/scannow command to request of the tech.  Error message received after scan 25% over that he can't finish.

  9. made by tech to perform an in Place Upgrade of my installation disks.  Update could not happen due to Windows PowerShell.

  10. made by tech to remove Windows PowerShell via "Turn Windows features on or off."  Error message that PowerShell cannot be disabled.

  11. realized by tech to modify the registry to disable the PowerShell.  In Place Upgrade always reports installed PowerShell and would not continue.

  12. looked for Windows PowerShell among the "installed updates".  There is no update labeled "Windows PowerShell" listed.

  So that is where I am now.  Windows Update did not work except for the occasional definition for Microsoft Security Essentials update since mid-December.  No security updates or patches cannot install properly by the installer of Modules of Windows crash.  I can't repair my installation of Windows because I can't uninstall Windows PowerShell.  If someone is able to help, please keep in mind that I read all the posts about how to uninstall Windows PowerShell through the registry and installed updates; None of them have worked for me; so please don't cut and paste these instructions again.

  Thanks to anyone who can help me.

  System information: Windows Vista 64-bit, SP2 top Home.

  And you were right: a trial version of Norton is installed.  I'm going to grap the Norton removal tool now.

  You should have uninstalled Norton free trialware, and then run the removal tool, BEFORE the installation of updates...

  Friday, January 21, 2011 18:59 [UTC], Robear Dyer wrote:

  VERY IMPORTANT! -Online any Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application...

  That being said, you have to get SP1 is installed, and then a few prerequisite updates (e.g., KB955430;) KB947821) before Windows Update will offer SP2. See...

  Windows Vista service packs are not available for installation via Windows Update
  [was: Windows Vista Service Pack 1 (maybe not) available for installation from Windows Update and is not offered by automatic updates]
  http://support.Microsoft.com/kb/948343

• How to compile and install the kernel modules after nation and nipalk for installation of Gentoo 64 bit?

  We are trying to install a PCIe 6251 DAQ card in a box of Gentoo 64 bit running Linux kernel 2.6.28 - gentoo-r5 4.3.2 - gcc and glibc - 2.8.  We have installed RPM utilities to manage the installation.  The current problem is that we are not able to compile and install the kernel modules: nidmxfk, nimsdrk, nimstsk and nipxirmk.  Here's a summary of what we have done so far, and to what extent we got.

  First of all, we have changed the configuration of the kernel that we could export the init_mm unused symbol by changing the configuration option of the CONFIG_UNUSED_SYMBOLS = o kernel and recompile the kernel.  Then we installed LabView 8.6.1.  Then we ran the nation 1.9 installer who has installed the source code in vain on the compilation.  To resolve this problem, we have changed the function of pte_offset to pte_offset_kernel by editing the file/usr/local/natinst/nation/configures following the instructions here:

  http://decibel.NI.com/content/docs/doc-4511

  We were then able to compile and install the kernel nation module thanks to:

  . / configure
  do
  make install

  lsmod said that nation has been properly installed.  Then we ran the installer for DAQmx 8.0.1 by:

  . / INSTALL - nodeps

  To do this, we have received errors indicating that LabView support could not be installed because check addictive (incorrectly we think) stated that labviewbase86 has not been installed; This caused the installer to have an abortion.  Therefore, we refused to install support for LabView 8.6 and revived the installation program which produces the output:

  Installation of the driver NOR-DAQmx Distribution of Linux Installer version 8.0.1f0...

  Already to jump Edward - 1.9.0 - f0.noarch.rpm installation, same or newer
  installed.

  Pre Installation...

  Preparing... ########################################### [100%]
  1:nitimingi ########################################### [ 4%]
  2:nipalki ########################################### [ 7%]
  3:nipali ########################################### [ 11%]
  RC0.d directory not found, startup script is not accredited with init levels.
  4:labview80 - rte # [14%]
  5:ni653x ########################################### [ 18%]
  6:nicdigi ########################################### [ 21%]
  7:nidaqmxcapiexmp # [25%]
  8:nidaqmxcapihelp # [29%]
  9:nidaqmxcapii # [32%]
  LN: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory
  10:nidaqmxcfgi # [36%]
  11:nidaqmxef # [39%]
  12:nidaqmxhelp # [43%]
  13:nidaqmxinfi # [46%]
  14:nidaqmxswitch # [50%]
  15:nidimi ########################################### [ 54%]
  16:nidsai ########################################### [ 57%]
  17:nimdbgi ########################################### [ 61%]
  18:nimioi ########################################### [ 64%]
  19:nimru2i ########################################### [ 68%]
  20:nimxdfi ########################################### [ 71%]
  21:nimxpi ########################################### [ 75%]
  22:nimxs ########################################### [ 79%]
  RC0.d directory not found, startup script is not accredited with init levels.
  23:niorbi ########################################### [ 82%]
  24:nipxirmi ########################################### [ 86%]
  25:nirpci ########################################### [ 89%]
  26:niscarabmm # [93%]
  27:niscxi ########################################### [ 96%]
  28:nistci ########################################### [100%]

  After Installation...

  At this point, after reading this report, we used the Gentoo rc update utility to add several scripts for the boot runlevel initialisation:

  update of RC - a boot nipple
  update of RC - a bunch of nipxirmu
  update of RC - a bunch of mxssvr
  update of RC - a bunch of nisvcloc
  update of RC - a bunch of nidevldu

  When the computer reboots, you get an error message indicating that the following kernel modules are not: nidmxfk, nimsdrk, nimstsk and nipxirmk.  lsmod shows that the nation and nipalk are installed, but no other kernel modules NOR are present.  modprobe-l shows that only nation and nipalk are available.

  So we have several questions:

  1. we install drivers in the correct order?  Should use us NI-VISA 4.5 or NOR-488. 2 rather than DAQmx 8.0.1?

  2. What kernel modules should be loaded for this equipment run?  How to compile and install the ones that we have yet, specifically nidmxfk, nimsdrk, nimstsk and nipxirmk?  Are there others?

  3. How can we get the installer to properly recognize that we have installed LabView Core and install support for LabView?  Are there additional kernel modules related to the support of LabView?

  4. What is the symbolic link that was not created in the DAQmx installation report? (ln: create the symbolic link ' / usr/local/include/NIDAQmx.h': no such file or directory)?

  I apologize for so many questions, but these seem to be the last obstacles to obtaining OR runs correctly on this system.  Is there other information that we can provide that would be useful?  Thanks for any help or suggestions you can offer.

  Craig

  Hey Craig,.

  Given that you use 64-bit Linux all kernel modules must be compiled for 64 - bit.  User mode binaries can be 32-bit, assuming that you have installed the 32-bit support libraries.

  NOR-DAQmx is a complex architecture and requires several kernel modules to support your PCIe card.  Most of these kernel modules have not been brought to support 64-bit Linux.  Some kernel modules are components infrustructure that are shared with other pilots OR as NI-VISA and NOR-488. 2 and have been brought to support 64-bit Linux.  Unfortunately, you need all the modules to use your hardware.

  I hope that answers your question.

  Shawn Bohrer

  National Instruments

• Vista SP2 does not updated Windows because the Windows Modules Installer (Trustedinstaller.exe) crashing

  Hello.
  My laptop Vista SP2 does not have Windows updates due to the Windows Modules Installer (Trustedinstaller.exe) crashing:

  Error message:
  "Signing of the problem:
  Problem event name: APPCRASH
  Application name: TrustedInstaller.exe
  Application version: 6.0.6002.18005
  Application timestamp: 49e01af1
  Fault Module name: wcp.dll
  Fault Module Version: 6.0.6002.18005
  Timestamp of Module error: 49e0380e
  Exception code: 80000003
  Exception offset: 0013b 972
  OS version: 6.0.6002.2.2.0.768.2
  Locale ID: 2057
  Additional information 1: fcbe
  More information 2: 21dec0ca93c87c4af4036e2c4a4d224a
  3 more information: 93a 4
  "Additional information 4: 172cbe47bfd87945783d7b08d7f02897.

  Update history shows a number of updates that haved 'impossible' to install accordingly.
  Any ideas how to solve this problem for all my PC install Windows updates pending?

  Thank you very much!

  Hi Spoon579,

  Jose is correct that we need more information. Without any information only generic suggestions that we can supply to run SFC/scannow here or CheckSUR here

• Libretto W100 - 10 d - 3 G Module does not work after the installation of the system

  Hello

  I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.

  After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!

  It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!

  I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)

  Can someone help me so that the 3G module working in return?

  Of many tanks and best regards

  Hello

  Have you checked the settings in the BIOS?
  To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.

  To access the BIOS press ESC and F1
  Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.

  Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
  This is the driver for the 3G module.

• Installation of the F3507g WWAN for Portege M700 PPM70E module

  Hello

  I bought a M700 who returned from a leasing company.
  It has a webcam or the module installed WWAN.
  I am not missing the webcam but try to upgrade the WAN card.

  PPM70E-0QH02DEN model number

  I got a card sim in Bay battery holder, while the mini-pci card should miss.

  Is it possible to upgrade?
  How can I access the mini-pci slot?
  What parts do need me? (F3507g card, antenna, cables, live)

  Thanks for help.

  Pete

  Hello

  You mean the 3G module?

  My knowledge of the 3G module was not installed in all Portege M700
  This means that there are different motherboards, which provide different hardware specifications.

  In your case, I recommend you contact a local ASP.
  Guys would be able to help you and provide the right parts for an upgrade (if possible)

  As far as I know that some of the M700 were equipped with a 3g + / HSDPA broadband with a data flow rates up to 3.6 Mbps (Module can be expandable to 7.2Mbps by firmware)

  Welcome them

• Installation of the Module LabVIEW 2012 SP1 FPGA with LabVIEW 2012 SP1 64 bit on Windows 7 X 64 machine.

  I installed 32-bit and 64-bit LabVIEW 2012 SP1 on Windows 7 X 64 computer. After that, I installed SP1 FPGA Module. While module FPGA completely installed in the 32-bit version and could develop projects fpga, FPGA interface has not installed the 64-bit version. Anyone had this before question?

  The document 5WMF8NQ2 knowledge base says it's doable.

  I have tried to repair the installed module, remove and then reinstall the module. Nothing helped me to get the FPGA interface on a 64-bit host VI. Any suggestions? Addition of the individual screws through the range of editing functions like a tedious process and the palette is not completely functional.

  I solved the problem. Had to repair each driver separately for LabVIEW 2012 SP1 64 bit installed on the default drive. You may need to copy paste files to the folder that it installed in function.

• Dimension 5150 - ideal for the installation of extra memory Modules

  Greetings-

  I'm looking for advice on the ideal placement of some extra memory modules.  My intention is to increase the original 2 x 512 MB memory by adding 2 x 1 GB which should theoretically give me a total of 3 GB.

  Currently, my Dimension 5150 has a module of 512 MB at the location 1 and another in the Groove 3.  My dilemma is - in which slots should I put the additional modules of 1 GB?

  For more efficiency and recognition, it would be preferable to use connectors 1 and 3 for modules of 1 GB and then move the 512 MB modules in slots 2 and 4... or should I just go ahead and put the two new modules in the slots of alternative 2 and 4?

  The optimal placement tips will be appreciated.

  I have a penchant for this old DELL PC, who recently returned to me after many years and I would use it in the company of another DELL later models... because its worth it.

  Best regards, Vicko

  If I did that, I pull the current memory, install the new memory and run some diagnostics above to ensure that the new memory is good.

  I then add the memory current po and run diagnostics and ensure that games memory agree between them.

  I've had times where bad corresponding memory worked well and moments where he does not understand that is why I suggest this approach.

• Best wireless network installation with the switch TP-Link

  Hi all

  Few question numpty maybe, but what follows... We just moved to a new (larger) home with thick walls and I want to set up a new wireless network.

  The current installation is:

  Fiber cable entering the House in the basement and connected the modem to the service provider that provides 150 mb internet. I changed the capacity wireless on the ISP's modem and connecting an airport extreme (2014 model) via the LAN to the modem. The extreme is in the office but on the 3rd floor is having connection problems than you can imagine. All rooms have access points CAT5e who all meet in the basement. I have two spare Aiport express and two Apple TV that I would use. Also I bought a TP-LINK 1000mbps (16 channels) Network Switch.

  Could someone please tell how the best set-up of my home network. For example, the Airport Express to the 3rd floor connected to the switch (wired) network or to an extreme in the Office? Apple TV also connected to the network switch?

  I would like to end up with a solid wireless network that passes without problem from extreme to Express necessary each time you walk and you want to use an Apple TV for television on the ground floor and one in our room.

  Many thanks and apologies once more for this very basic question... I have expanded my front (extreme Express) wireless network but just don't know how best to use the switch.

  Thank you

  The simplest up set... which is almost always the best game in place... would be to connect the switch 16 ports to the modem/router and then connect devices to the switch. In other words, if your modem/router has 16 + Ethernet ports, the simplest network configuration would be to plug as many devices as possible directly to the modem/router.

  Other variants are possible, for example, the network might look like this:

  Internet > Modem/Router > AirPort Extreme > switch > devices... or, you can connect certain devices to ports Ethernet on the AirPort Extreme and some to the ports on the switch.  One thing to keep in mind however... If there is a problem... Troubleshooting may not be easy since it will be difficult to know where the problem actually lies.  Much easier to all have, or of possible devices, connect to the switch.

  Unfortunately, the AirPort Express devices will be of real bottlenecks on your network.  These devices are notoriously slow as well as wireless, and even if they work well, the speed will be does not exceed 100 Mbps... since it's the speed of the port to the AirPort Express.  In fact, I expect each Express to provide a wireless signal in the range of 50-60 Mbps.

  Another thing to keep in mind of the wireless network is that Macs will usually a good work of tilting automatically to the point of wireless to the other as moving from one place to the other in the House... but the iPhones, iPads, PCs, and other mobile devices will do that very well... If they do at all.

  So with these devices, you will need to get used to temporarily disable the WiFi on the device and the device when you move in one region to the other, and then turn WiFi on must generally then pick up the signal from a nearby wireless access point.

• Not able to install the common module on satellite Pro A120

  Hi guys:
  I recently reinstalled xp professional on my satellite pro A120. I could download and install the main drivers of http://uk.computers.toshiba-europe.com and my phone is functional. However, I did not all sounds and (F6 & F7 and toggle) function keys not working, even after insalling the sound card. I read some of the posts on this forum and found that I needed insall the 'common' module to make them functional. I downloaded the driver from module common too, but when I run the Setup it starts initially, but fails both the configuration is complete.

  The same thing happens also with a few other drivers as saver of energy etc... I was not able to run the Setup program for the common module & driver power saver, basically, nothing happens after I have the respective installation.

  Can anyone help please?

  Pravesh

  As far as I know on the download page you can find the installation instructions with exact installation document order how to install drivers and tools specific to Toshiba and utilities.
  You have installed all the stuff after this installation order?

• Using instrumented hammer model PCB 086D 50 with the NI9234 module and chassis OR cDAQ 9188

  Hi all

  I need to try to shock with a PCB 086D 50 instrumented hammer hammer. I use the chassis OR cDAQ-9188 with the NI9205 and NI9234 modules. The hammer is connected to the NI9234 and accelerometers are connected to NI9205.

  When I test the modules in SignalExpress I get very good results for the dog, but the accelerometers are ok. Also, if I am controlled the hammer OR Max where I have the option to activate the IEPE the result is ok. In SignalExpress, I couldn't find the option to activate IEPE.

  I have no experience using software, but I started to learn. Does that mean that I need to program the system for my setup in LabVIEW? Also, the installer of the equipment makes sense, the modules that I plugged on the cDAQ can be used simultaneously? Should I have the additional device in order to use the hammer with cDAQ 9188?

  Thank you very much

  Emina

  You can enable IEPE in SignalExpress. Here is a configuration for a single power hammer and three accelerometers a 9234-related.

  

  You don't mention the model for accelerometers. They are also the IEPE sensors? If so, have what conditioning of signals you added before the 9205?

  The Assistant Sound and Vibration (built on SignalExpress) contains an example of Impact Test. The Sound and Vibration Toolkit comes with a sample project for the impact test. With free evaluation period, go ahead and look at how one of these examples is implementing the configuration and the triggered acquisition.