Installation of the power of fire

Similar Questions

• Need help - Cisco ASA with the power of fire

  Hello

  Currently, we use asa 5510 without function of firepower. Our goal is to publish web servers and microsoft lync with reverse proxy method. control internet traffic, apply extensions individual file not to download, management of bandwidth etc.

  Is it possible if we add firepower on asa 5510... Please guide me... Thank you

  Power of fire must be installed on the new series X of the SAA.  5512 x, x 5515, 5525 x, etc.

  If you have a 5510, you probably want a 5512 x with an SSD.  Cisco has beams of firepower include the ASAx with SSD and the license of firepower.

  Adds that you must also Firesight management software, and there is a license bundle of 2 camera for under $ 500 that you can install on VMWare.

  Firepower is not reverse proxy, it's transparent online packages, analysis and filtering by URL / Application / and threat mitigation.

  If you want a reverse proxy, you should look into Microsoft ISA server or a Proxy Server reverse dedicated Web.  Cisco gave its product Web Director, who has done this function.

  You can host Web sites behind a firewall of ASA without proxy reverse.  And the ASA has an inspection of the request for HTTP traffic, responsible for watching HTTP requests.  The firepower to the ASA system also has specific signatures that monitor traffic to the web servers and prevent specific vulnerabilities that are known on those servers, so if that is what you want the Reverse Proxy for, then the power of fire module would probably cover your needs.

  Don't forget that until the next quarter firepower system has no decryption on the box, and you might want to wait that the feature is released and put in place, so that you know what size firewall you need protect your network with the SSL decryption.  I believe that the ASA5512x is testing at 75 Mbps stream decrypted via the fire power module, which is about half of what was before CX, then you could use the sizing numbers CX and extrapolate until Cisco releases official decryption numbers.

• ASA with the power of fire, no need for the license of botnet?

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.     Cheers - more to see: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  See you soon

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  1. We are looking to upgrade our ASA of legacy IDS/IPS in firepower (to buy SSDS), we use the botnet license, go to firepower would make redundant botnet as sourcefire/firepower does the same job?
  2. We are looking to buy 2 new 5516 for a site with the power of fire, so I need to know to add the botnet on the agenda.

  See you soon

  -See more at: https://supportforums.cisco.com/discussion/12527741/asa-firepower-any-ne...

  Double - answered in the other display.

• Fire power User Agent is unable to connect with the power of fire management center

  Hi Cisco supports,

  I have problem with firepower User Agent, when I want to add a power of fire management center agent, then I get the error "cannot connect to the management center of firepower." You can find the error in the attachment! I have already added the User Agent in the CMF.

  My Version of power of fire management centre is 6.0.0.1

  and my 2.3 10 User Agent

  Hello

  You don't need to open it manually. If you have added the CMF officer, then it should be opened by default. What I wanted was to ensure that there is no intermediate firewall between the agent and the CMF.

  You can capture packets on FMC cli and check if traffic reaches here.

  > tcpdump-i eth0 port 3306

• Cisco ASA with the power of fire vs Cisco IPS Appliance

  Hello

  Question: is there the functional differences between an ASA with the feature of firepower enabled and power of fire IPS appliances 'pure' (e.g. 7000 and 8000 series IPS Modules)?

  Thank you very much!

  Kind regards

  David

  Hello team,

  The same features except hardware bypass and another should trhougputs. Of course the flow rate will be high for hardwrae devices and it also has the ability to bypass equipment. Apart from that URL and all other filtering the same characteristics.

  Rate of good will if this post helps you.

  Concerning
  Jetsy

• What is the power of fire? is the hardware modules? is a software? is allowed?

  Dear all,

  I am newbie to firepower.

  My client uses ASA 5512-X WITHOUT firepower, they want to use something like function UTM.

  I have googled and find the firepower may be good choice.

  But I didn't not firepower is hardware modules? or software? or I have to buy an additional license?

  THX

  Hello team,

  You can integrate ASA with firepower. Firepower of the hardware and software modules are available. You can integrate the power of light software with ASA 5512.To module manage the fire power modules, you can use Firesight Center (virtual and hardware) management. To manage the power modules of fire, which you need a minimum of Protection and control of license and you need to buy separately to the Cisco team the global license.

  Here are some links for reference.

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/Quick_Start/SFR/firepo...

  http://www.Cisco.com/c/en/us/TD/docs/security/firesight/5407/Relnotes/fi...

  http://www.Cisco.com/c/en/us/TD/docs/security/firesight/541/firepower-mo...

  Rate and correct mark if the post will help you

  Concerning

  Jetsy

• What happens when the power of fire ASA subscription expires?

  What happens when ASA FirePowers subscription expires?

  What happens with the ASA? services continue to work? show an alarm?

  Thank you!

  Jorge

  If fire power module ("sfr") is more associated with a current license, policies applied by the management centre Firesight (CMF) will have no effect and you will not update in the event logs. FMC will warn you that your license (s) is expired assuming that you have a properly applied health strategy.

  The ASA base will continue to operate as usual. The redirection of traffic through service in the sfr module strategy will be largely ineffective.

• Differences between WAP and Malware protection in the power of fire ASA

  Hello

  Do you know what are the main differences between terminals AMP installation and activation of malicious software services in the management of Firesight Center?

  They are not doing the same thing or is there a big difference?

  Thanks in advance.

  Hello

  There is difference. AMP on client's protection of endpoint that is controlled by the connection of cloud and Firesight central management console can be (optionally) connected to it to collect the reports of customers as well.

  While the activation of services of malware in the CMF (firesight) resembles a network based AMP that can detect/prevent malware from traffic passing through a managed sensor.

  Final AMP is more for customers who are moving and are not always behind a firewall/sensor protected.

  This could shed more light.

  http://www.Cisco.com/c/dam/en/us/TD/docs/security/Sourcefire/fireamp/FIR...

  http://www.Cisco.com/c/dam/en/us/TD/docs/security/Sourcefire/fireamp/FIR...

  Thank you

  Yogesh

• Protect and control the license for ASA with the power of fire

  I had 1 ASA 5515 initially delivered with the software cx, then made room for the software of firepower and got the virtual firesight for 2 devices and license of TAMAS tha L-5515, but this license was told only the URLs and malware license, I thought that this license was for all that since he has no other licenses in the data sheet and it's Reference with more features.

  How can I get the license protect and control now so I can add the asa with the firepower to firesight and apply to all licenses

  Thank you

  Hello

  L ASA5515-TAMAS = SKU license plans to "MALWARE" and "URLFilter" and legally gives the user to updates of the signature "PROTECT + CONTROL". It does not license "PROTECT + CONTROL". You need to buy "ASA5515-CTRL-LIC =" to license "PROTECT + CONTROL".

  Please discuss a case with CISCO GLO, they can help provide a CTRL license

  -DD

• Exclude specific sites of policy analysis of the power of fire ASA files

  Is someone can you please tell me if it is possible to exclude some sites of ASA Firepower file scanning policy? We have an ASA 5506 X and I would like to exclude the URLS for windows update and other sites of the file scan policy. I tried a rule using custom URL object, but it did not work.

  Hello

  This means that the rule you created is not put in correspondence with the traffic.

  Try to create the rule to be more specific and add urls anymore.

  I have and it works.

• Traffic that overlap on the device with the power of fire

  Hello world

  How should I handle the traffic that overlap on the device of firepower?

  I am inspection 2 VLANS using switches virtual, one VLAN is my edge of the internet and the other VLAN is my internal servers VLAN.

  Sometimes my internal servers to THAT VLAN needs access to internet and that traffic is superimposed on the inspection of my internet edge VLAN.

  Is there a configuration to avoid connections between connected/inspected twice?

  Thank you

  Hello

  You can create rule of the trust with areas / vlan specific or IP source/destination if you want a specific traffic does not inspect.

• the power of fire IPS rules

  Dear,

  Please find the attached screenshot for an example, there are many disabled bydefault rules how do I know that I need to enable to avoid any attack on the network.

  Thank you

  Hi Jack,

  Yes its safer, but I suggest you make sure you that there are not too many rules permitted there also have a performance impact. All the tests on the device of firepower is using the policy of security and connectivity of balance. So using the connectivity security increases the load on the system.

  But as long as traffic isn't oversubscription the device, it should be ok.

• Best practices for the implementation of the power of fire

  I am looking for a best practices deployment FireSight? Can someone help me?

  Thank you

  -mikgruff

  There is not a general guide outside the configuration guide of product on the support page.

  Partners have access to a guide designed for deployments of the value which is fairly comprehensive, but that is not published publicly.

  There are some useful tips on recent presentations from Cisco Live in this area, but they are more PowerPoint as the deployment guide.

• Time synchronization between the module of SFR (ASA5512) and the power of fire management center

  Hello.

  I deploy my network Cisco Management Center (for VMWare, v. 6.0.0) FirePOWER and tie SFR-module of Cisco ASA 5512. After you apply time in CMF settings, I have a synchronization errors for my module SFR ("TimeFor 172.16.x.x synchronization state is out-of-sync").

  This article presents a framework that allow the synchronization time SFR-module with CMF. But I don't have an option to set the time on managed devices, just for the CMF.

  Please, tell me how I can solve this problem. Thank you!

  I just went through this with TAC.  They pointed out that the documentation states that you should not synchronize SFR with a virtual CMF.  I found myself defining the CMF and SFR as you pull my domain controller, and everything was fine.

• Power of fire time SYN with Firesight

  Dear,

  My fire power is not synchronized with system for time firesight, firesight is synchronized with an ntp server but firepower is not synchronized, how I can set the clock/NTP in firepower.as I know initial installation, we get an option ntp but now the power of fire is already set up and I get no CLI option to configure NTP

  Thank you

  Adam,

  Allow you to control the 99% of a module of firepower (on SAA) Management Center of firepower (new name for FireSIGHT Management Center for the defence of AKA) or stand-alone unit does, including the definition of the NTP server.

  As indicated in the document, create or modify a strategy of firepower to define time synchronization settings. Save it and deploy it to your devices and they will be updated with this policy.

  See the following screenshot of the example (open in a new tab to zoom in):

  Policy setting Module of firepower to NTP