Installation of the printer driver Officejet G85 fails with the message "print processor does not exist" with Windows 7

Similar Questions

• "The print processor does not exist" what can I do? The printer is a Brother MFC-J430w.

  I am trying to install a wireless printer Brother MFC-J430w on my Dell PC to 32-bit. I have downloaded the driver on the Internet, but I get a prompt saying "cannot install the printer. The print processor does not exist. "What should I do?

  Yes, you can try to replace localspl.dll winprint.dll

  Create a restore point from the system beforehand and restart the computer later.

• "Windows cannot connect to the printer. The print processor does not exist.

  I am trying to connect to a printer on my home network.  LaserJet 1020. Who lives on a different computer on windows 7.  It works fine on his 'home' of that Win 7 cannot connect to the printer. but when I try to network I get this message.  "Unable to connect to the printer. The print processor does not exist.  I downloaded a new driver from HP without success.  All of the suggestions.  Thanks in advance.

  Print processor which is using?  Properties of the printer, Advanced Print processor.   See if changing to wil Winprint allow the connection of the printer. Note the current so you can change back if required. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• LaserJet P3010: Cannot install the printer. The print processor does not exist

  I have a LaserJet P3010 Series PCL 6. It gives me the following error when I try and add it to our print server: "unable to install the printer. The print processor does not exist. "Regardless of what kind of IP config I use, the test page I always manually print has 0.0.0.0 for everything, even with the manual entry of IP. It is brand new, fresh out of the box, and I installed a few of them before. There seems to be 2 sets of link one of them lights flashes green (even without a CAT cable) and the other shows not all colors. (I think that's the main, judging by its location). I know that the cable is good, but also over all cable infrastructure. Should I have a defective printer? Or did I miss something...

  Problem solved. Use another port.

• "The print processor does not exist.

  I'm trying to install an XPS printer on windows 7-64, but get the message "Print Processor does not exist". Can someone help me please

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot install the printer. The print processor does not exist.

  Windows 7 Enterprise 64 bit.  I am able to install HP LaserJet printers but no virtual printer.  I can not load the XPS from Windows printer or Print to OneNote.  I also tried to load more than one PDF printer and none of them work.  The error I keep gettig to "cannot install the printer.  The print processor does not exist. »

  Any ideas would be appreciated.

  My laptop has been reloaded from a picture, and I was not able to start the print spooler at all. I have studied the issue and cleaned files and registry entries and was able to print on real printers, but not virtual. That's when I asked the question.

  Finished reimage the computer again, and once again, I could not start the print service. We discovered that the image that the laptop was built from was actually a VMWare virtual machine, so we started to look in that direction.   We had to delete the following entry in the registry and rebooting, how the print spooler began to work very well.

  [Print HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Monitors\ThinPrint for VMWare Port Monitor]

  You wanted to post this in case someone else ran into a similar problem.

  This is what worked for me.

  I copy the files from the print processor from another machine to work with the same architecture as the one who has the problem (x 86 or x 64).

  Step 1: Stop the print spooler service.

  Step 2: Copy all the files and folders on the system to work under C:\Windows\System32\spool\prtprocs\x64.

  Step 3: Make a backup of the system files listed in the C:\Windows\System32\spool\prtprocs\x64 problem.

  Step 4: Paste the files that you copy from the system of work in the case of the United Nations, the problem system.

  Step 5: Start the print spooler service.

  Try to connect or install your net printer and it should work now.

  I hope this work for all of you.

• 2 printers - can print only a - print processor does not exist?

  I have two printers - one that I just bought.  I installed the new without any problems, that is a series of Deskjet 3510.  The other is a series of deskjet 6980.  I want to use two printers, but when I try to print the 6980 is not in the drop-down list.  I see when I look at the printers in my computer, but he can't see it when I try to print.  I tried to reinstall the 6980 and it says that the print processor does not exist.  Help, please!

  There's a troubleshooter created by HP

  Please try the HP printer installation wizard

  or use this link: www.hp.com/go/tools

• Print processor does not exist

  I am running Vista Home Basic SP2, and all of a sudden my computer does not recognize my computer. Attempts to re - install gives the notification: "unable to install the printer. The print processor does not exist. "What could be the problem? How is this best set?

  I finished by using System Restore and restore to the previous successful configuration. It worked, but I still don't know why the printer stopped working. Everything works fine now. Initially I had uninstalled the printer and re-installed, but he would never let me complete the installation.

• Cannot turn on network discovery. I get the message "specified service does not exist as an installed service.

  Suddenly, something has changed in my computer and now I can't turn on network discovery. Every time I try, I get message "the specified service does not exist as an installed service. I get the same message for others e.g. file sharing and printer sharing. Changes the most recent have been updated to McAfee a few days ago. But the network worked well until last night.

  Hello

  What is the brand and model of your computer?

  Method 1:
  Based on the network location you choose, Windows affects a State of network for network discovery and opens the Windows Firewall ports suitable for this State.

  Step 1: We recommend you to check if the elements of network discovery are enabled in Windows Firewall. To do this, try the following steps.
  a. Click Start, type firewall and then click Windows Firewall with advanced security.
  b. click on rules of incoming traffic in the left pane and select the (SSDP-In) network discovery and network discovery (UPnP-) in the list.
  c. click on rules of outgoing traffic in the left pane and enable network discovery (SSDP-out) and the discovery of the network (UPnP-Out) in the list.
  d. apply the changes and check the result.

  For more information about network discovery, see this link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-network-discovery

  Step 2: Check the status of the following services: browser, TCP/IP NetBios support.
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click the service computer browser and TCP/IP NetBios support.
  c. change the startup type to automatic and start the service.
  d. apply the changes.

  Method 2:
  Run an analysis of auditor of system files on your computer and check for the issue.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
  I hope this helps.

• Dell XPS: HP Envy 5530 print processor does not exist

  The printer is installed and works fine wirelessly.  Fix an update or antivirus protection and he was no longer a compatible printer PictBridge including PDF printer. I don't know when it happened.

  I tried different things as suggested by microsoft support. Copy the folder Prntprocs/X 64 on C:/windows/system32/spool/who was missing winprnt.dll from a work computer.

  CHecked Reg Key and winprint.dll driver added to Windows NT. There were x 64.

  Checked print spooler was carried out.

  Local printer by USB could be installed correctly.

  Puzzled!

  Hello

  If you have tried the steps as described in the post and if the problem persists, try the steps as shown in the above the below URL.

  http://support.Microsoft.com/kb/929833

• I bought lightroom 6 at amazon, but it will not be installed. All I said "Installer failed to initialize, please download Adobe install advisor to detect the problem", but it does not exist. It gives me no more information than that. I have already

  I bought lightroom 6 at amazon, but it will not be installed. All I said "Installer failed to initialize, please download Adobe install advisor to detect the problem", but it does not exist. It gives me no more information than that. I already had a free annual subscription to cc through my new canon camera, but I installed for my mac already. No phone number to call, adobe contact to say amazon, what do I do?

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Cannot install Blue Squirrel ClickBook "print processor does not appear to be installed corectly. The printer name is invalid. "Printer - 20 and 1798 error error code"

  OT: Print processor.
  During the installation of Blue ClickBook squirrel (for windows7) I get the message "the print processor does not appear to be installed corectly.  The print processor is unknown.  The printer name is invalid.  Also "printer error code - 20 and the 1798 error.»  I need CBWP. DLL to work properly in order to be able to use this program.

  Hi Chancey,

  1. are you able to install other applications?
  2. are you able to print from other applications?

  If the problem is with the book in a Blue Squirrel click, then I suggest you to contact the manufacturer for support.

• PS ask activetion again. the worm is first CS PS v8, it fails, I tried to call help number given on the page but service does not exist, redirect to .../go/activation statement fails, it causes some assistance - activate is not possible to click

  PS ask activetion again. the worm is first CS PS v8, it fails, I tried to call help number given on the page but service does not exist, it redirects to .../go/activation

  statement fails it causes some assistance - activate is not possible to click

  Adobe has disabled the server activation for pre CS3 products a long time ago and that's why you are unable to activate your product. I can not to suggest what to do, but I don't know that CS2 owners with this problem can download a version specially created that doesn't require activation. To my knowledge, no such version exists for CS. If it was me, then as the real owner of the software and just unable to use it due to having no mechanism to activate, I download CS2 and use it until someone from Adobe told me to stop. It is a sensitive issue because the download site clearly indicates that there must be an existing CS2 owner. However, the url to the download was posted the pirate not many Adobe Web sites not as a way to free download the CS2. I imagine that there have been hundreds if not thousands of downloads from 2013 when it became first available and so far Adobe has not made any attempt to restrict the download to current owners of CS2. Their policy is quite clear if CS2 is not given away for free. Fortunately, I use CC2015, I can't make a call on it, but the URL is below if you want to move forward.

  Download Adobe Acrobat 7 and Adobe Creative Suite 2

  Terri

• Everything started getting the message "this computer is not running genuine windows.

  I started getting the message "this computer is not running genuine windows.

  I tried re-activate online and still get the message.

  I tried activating by phone and still get the message.

  The message is on the screen and ran up MGADiag and got the following:

  Can anyone help?

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Code of Validation caching: 0x0
  Windows product key: *-* - KM9W6 - FQ6CV - 676B 3
  The Windows Product Key hash: wzer4Vgu/82pZnlLT5clC4N1KMY =
  Windows product ID: 00371-OEM-9072953-34635
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {FB5EAF24-648F-41E9-99B4-E2F77A0E94A3} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.140303 - 2144
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  2007 Microsoft Office system - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395]
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395]
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0]
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0]
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\en-us\user32.dll.mui[6.1.7601.17514]

  Other data-->
  Office details: {FB5EAF24-648F-41E9-99B4-E2F77A0E94A3}1.9.0019.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-676 B 300371-OEM-9072953-346353S-1-5-21-807467245-3392229789-2570558715Sony CorporationVGNZ790DINSYDER4044M320091110000000.000000 + 00022C13A07018400F804090409Eastern Standard Time(GMT-05:00)03SonyVAIO1001002007 Microsoft Office system12278FF0D99FEF5AE7Nm6Skf12U + IkMGoB/sNA1ilGbw =89451-OEM-6672725-13787 4

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: e120e868-3df2-464a-95a0-b52fa5ada4bf
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00180-729-534635-02-1033-7601.0000-3622014
  Installation ID: 009885890881275631194586153296712880021192777835802025
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 676B 3
  License status: licensed
  Remaining Windows rearm count: 3
  Trust time: 01/04/2015-16:56:14

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: 0x00000000
  Beyond: 0x000000000001EFF0
  Event timestamp: 3:30:2015 21:34
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: NgAAAAEAAwABAAIAAAABAAAABAABAAEAln2yeEKnUrCCCPYEgM + iYc7tZGKzbACmhIWA8UbK

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC Sony VAIO
  Sony VAIO FACP
  Sony VAIO DBGP
  HPET Sony VAIO
  Sony VAIO BOOT
  MCFG Sony VAIO
  SLIC Sony VAIO
  ASF! Sony VAIO
  SSDT Sony VAIO

  Hi Mark,

  Please contact the Microsoft community.

  This problem can be caused, if any material changes or if the chips are corrupt.

  • You did significant hardware changes to the computer?

  Please follow the method below and check if this can help:

  When you troubleshoot problems activating Windows, you may need to rebuild the Tokens.dat file.

  This article lists the steps to rebuild the Tokens.dat file.

  https://support.Microsoft.com/en-us/KB/2736303?WA=wsignin1.0

  Follow the article below for your reference and check if this can help:

  http://Windows.Microsoft.com/is-is/Windows/help/genuine/FAQ

  As it is an OEM computer, I suggest you contact Sony support if the problem persists.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=driver

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• TNS-12545: Connect failed because target host or object does not exist

  Hi all

  I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.

  [oracle@host2 ~] $ hostname

  host2.example.com

  [oracle@host2 ~] $ tnsping ORCL

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))

  TNS-12545: Connect failed because target host or object does not exist

  Here's my tns annually involves Details:

  on host1:

  [oracle@host1 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = ORCL. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = ORCL)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@host1 admin] $ more tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  LSNRCTL > status

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date April 5, 2014 20:09:33

  Uptime 0 days 0 h 25 min 1 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))

  Summary of services...

  Service "ORCL" has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  Service "ORCL. The WORLD' has 1 instance (s).

  Instance "ORCL", status UNKNOWN, has 1 operation for this service...

  Service 'ORCLXDB' has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  The command completed successfully

  On host2:

  [oracle@host2 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = MYTEST. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = MYTEST)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@host2 admin] $ tnsname.ora more

  TNSNAME.ora: no such file or directory

  [oracle@host2 admin] $ more tnsnames.ora

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  Please help me what I do in configuring the listener and tns.

  Kind regards

  Michel

  fb767351-A660-4b18-9a9f-73bc141f6a0c wrote:

  Hi all

  I have two hosts with me. 1 host1 and 2. host2. Host1 have ORCL database. And when I'm doing the tnsping to host2 for database ORCL I get error below.

  [oracle@host2 ~] $ hostname

  host2.example.com

  [oracle@host2 ~] $ tnsping ORCL

  AMT Ping utility for Linux: Version 11.2.0.1.0 - Production on 5 April 2014 20:31:40

  Copyright (c) 1997, 2009, Oracle.  All rights reserved.

  Use settings files:

  TNSNAMES adapter used to resolve the alias

  Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = ORCL)))

  TNS-12545: Connect failed because target host or object does not exist

  If your entry for "ORCL" tnsnames decided to 'contact' indicated info.  He tried to send a ping packet to the server identified by "(HOST = host1.example.com)". "  Oracle tns transmitted the request to the network stack of BONES for the resolution and routing.  Here, 'host1.example.com' host name could not be resolved to an IP address, or if it was, it was an IP address that is a dead-end.

  Here's my tns annually involves Details:

  We see the details necessary out of your tnsping tns.  Since the application never had the host (as is obvious in the error message), nothing about the questions of the listener - he never got.

  on host1:

  As your example tnsping host2, and says that the error message obvious host1 is nowhere to be found, like the listener, none of the files of configuration on host1 question - demand ever on host1.

  [oracle@host1 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = ORCL. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = ORCL)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  [oracle@host1 admin] $ more tnsnames.ora

  tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora

  # Generated by Oracle configuration tools.

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  LSNRCTL > status

  Connection to (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=host1.example.com) (PORT = 1521)))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production

  Start date April 5, 2014 20:09:33

  Uptime 0 days 0 h 25 min 1 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/host1/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=host1.example.com) (PORT = 1521)))

  Summary of services...

  Service "ORCL" has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  Service "ORCL. The WORLD' has 1 instance (s).

  Instance "ORCL", status UNKNOWN, has 1 operation for this service...

  Service 'ORCLXDB' has 1 instance (s).

  Instance "ORCL", State LOAN, has 1 operation for this service...

  The command completed successfully

  On host2:

  Okay, the problem being that a client on host2 couldn't solve a connection to hos1, these could be revealing.

  [oracle@host2 admin] $ listener.ora more

  listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora

  # Generated by Oracle configuration tools.

  SID_LIST_LISTENER =

  (SID_LIST =

  (SID_DESC =

  (GLOBAL_DBNAME = MYTEST. WORLD)

  (ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)

  (SID_NAME = MYTEST)

  )

  )

  LISTENER =

  (DESCRIPTION_LIST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  )

  )

  ADR_BASE_LISTENER = / u01/app/oracle

  Except that in the example, we work with, host2 is the customer, trying to reach a database on host1.  Any listener on host2 is totally irrelevant.

  [oracle@host2 admin] $ tnsname.ora more

  TNSNAME.ora: no such file or directory

  [oracle@host2 admin] $ more tnsnames.ora

  MYTEST =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host2.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = MYTEST)

  )

  )

  ORCL =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP)(HOST = host1.example.com) (PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = ORCL)

  )

  )

  It's the only tns configuration file that is important for the problem at hand.  And we already knew what he said, since the output of your command of tnsping.

  Please help me what I do in configuring the listener and tns.

  Kind regards

  Michel

  Is "host1.exampl.com" the real hostname of your machine "host1"?  Or you made that blur in your ad - thing quite legitimate to do this for security reasons.

  Whatever, this is not really a matter of tns, unless of course 'host1.example.com' is really what you put in the tnsnames file, but your server "host1" became really something else.

  Assuming that 'host1.example.com' is the correct value, debugging starts with the following:

  [oracle@host2 admin] $ ping host1.example.com

  [oracle@host2 admin] $ tracerout host1.example.com