installation of the printer software desk top

Similar Questions

• We get 0 x 00000704 error. "The specified port is unknown" during the installation of the printer software.

  Original title: error 0x800f0243

  I tried to install the software for my 9130cw mfc via a wireless connection and I got this error, followed by an error of 0 x 00000704.  "The specified port is unknown."

  Ive had no problem installing the rest of the printer on my other laptop... but now its giving me a problem on these new.  Any help is welcome

  Hello

  Please write to us.

  The question you are faced to could be due to incorrect settings of the printer.

  To better understand the issue, I want to know:

  1. What is the brand and model of your computer?
  2. Have you installed the printer software on the other computer via the wireless connection/USB port?

  Please, try the following steps and check if that helps.

  1. Press the Windows key + R key, type control, and then click Ok.
  2. In all the elements of the Control Panel, click on devices and printers.
  3. Then double click on Add a printer , and then choose Add a network, wireless or Brother MFC 9130cw printer.

  Feel free to write us again if you have other queries, comments or suggestions using your Windows.

• Windows 2000 and XP Update: freezes at the installation of the printer software

  When he performs the upgrade from 2000 to XP, it stops when you try to install my printer Brother MFC software.

  The message "not tested logo.

  Although there is a 'stop install' button YES/no, I can not select YES or NO, because I don't have a mouse to select with.

  Any key on the keyboard do anything either.

  I can't find any references to break out of the loop you are in. You might be better pull the reader, get the information you need to install out of it and then format and do a clean instead of upgrading. Of course, you'll need get the drivers from the site of PC manufacturers.

  Unless of course someone can provide additional information for you.

  Note: you try to continue installing with the printer * not * attached?

• installation of the printer software

  Windows vista ultimate os. tried to install the HP 8500-printing software... allowed printing but would never accept the scan software (for scan to email documents or simply make a copy right or fax)

  Hi aprilworthington,

  To get the drivers you need, you can visit the HP website, which I believe is here:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&lang=en&product=3752459&

  If it's not the right model for you, please do a search on the HP site for the correct model download your latest drivers scanner.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite Pro L300 - missing dll. files after the installation of the printer

  Hello

  I have missing dll. files on my Pro L300.
  When I try to install my printer software it throws an error message upward.
  I now have the missing dll. files, but can't seem to install them. Someone knows what to do with them?

  I am running XP and the files are sccbase.dll slbcsp.dll

  I have listed this question before, but it has never been on the forum?

  Thank you very much

  Q

  Hello

  I searched and slbcsp.dll sccbase.dll and found someone who had the same problem after installation of the printer software.
  Check out this site:
  http://forums.CNET.com/5208-6142_102-0.html?ThreadId=275051

  Please post some feedback after you try the workaround solution posted here.
  It looks like a registry key must be changed.

  Good luck

• HP Photosmart 5500 series main: installation procedure for the printer software

  In my attempts to install the software of series of Prniner of 45510e-all-in-one Photosmart hp, I think that the process does not complete the installation of the software. After I clicked on that I accept the terms of the agreement, that he turns back to the ilnstall screen and a few seconds, it indicates the installation is complete. I don't think that the process is quick. It seems that there may be interrupted the process.

  In support of this contention, the printing software HP and doctor Scan shows the software seems incomplete and that there are problems of dirver.

  Can someone provide explanations that the question of the installation is deficient in this case, or that he really install this fast?

  Arthur

  The initial installation software for the HP Photsmart 5510 series was the correct software.  I finally resorted to re - install Windows 10. I was then able to uninstall properly the remains of the 5510 installs my computer which allowed somehow not all subsequent installations trying to finish. Unfortunately, the software would not overwrite the wrong files and it does not alert me to the fact that it was not complete installation.  It simply says that the installation is complete.  My guess is the ultimate failure of the procedure was the result of some entries in the REGISTRY, creating a conflict with the installation and full installation process was abandoned.

  The process automated to re - install then took place without a hitch and all the functions of the printer now appear to work as expected.

  I think that an option in the installation process to allow overwrite existing software on the computer may well have solved this problem without pain. The alternative that I had to go through has been extremely laborious and frustrating.

  ArthurmB

• Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  Have you installed the printer & software driver... will not recognize the installation of the scanner or Nikon camera to download photos... What can I do?

  The duplicate thread information:

  Cannot connect Epson scanner/Nikon camera to printer!

  Hi Carolyn has Culp,

  
  Thanks for asking this question to Microsoft Community!
  
  I understand that your scanner and Nikon camera is not getting recognized in windows vista.

  He would be grateful if you could answer these questions. This will help us to a better way to get a resolution of the issue.
  1. have you made changes on the computer before this problem?
  2. What is the brand and model of the scanner?
  3. are you an error message or error code?
  4. is that your other USB devices work?
  I would suggest trying the following methods and check if it helps.

  Method 1:
  

  Try connecting to another USB port and check if the camera is detected or try to plug the camera on another computer.
  Method 2:
   
  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us
  Method 3:
   
  Remove and reinstall all USB controllers.
  To remove and reinstall all USB controllers, follow these steps:
  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) expand Bus USB controllers.
  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.
  (f) restart the computer and reinstall the USB controllers.
  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.
  
  Method 4:
  To update the chipset drivers and check if it helps.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Reference:
  The problems of scanning: http://windows.microsoft.com/is-IS/windows-vista/Troubleshoot-scanning-problems

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• HPPIW. EXE does not solve the problem with the installation of the complete software for 8500 A909g

  Waterboy71 - sorry for a new position, but the forum is read-only (?) so I can't respond to your response to my problem with the installation of the driver/software 8500 A909g.  By your answer on 5/19, I downloaded HPPIW. EXE and it ran.  It detects my wireless printer, but it tells me that "the selected printer is not supported by this wizard."  Is there another thing I can do to install the software so that I can scan and fax from my Windows laptop 8.1?

  Hello
  If please try following the steps below and check if this can solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  Kind regards
  Shlomi

• Where if the printer software?

  Hi everyone, I could be an absolute fool, but where is the printing software (to check ink levels in my printer)? I can access via the menu recent applications in the Finder (open itself when my paper stuck!) but I can't find it in the Applications folder or in the Utilities folder inside that? Where is he on Earth? Thanks for your help.

  Go to the Apple Menu > System Preferences > print and scan and double-click the icon of the printer on the left. This will bring the print queue. You should see an option to settings on top. Click to access the options.

• HP Director launch even after the installation of the updated software. HP Officejet 5510.

  Problem launching HPdirector even after the installation of the updated driver.  Also not scan; message machine wants software installed.  Did not have this right?

  Any ideas?

  [Personal information]

  Hello drudgedread

  Follow the steps below and let me know what happens? These instructions will be clean your temporary folder (a folder that contains temporary data such as data configuration / installation) and rub the printer software with the most recent uninstall.bat utility for your printer.

  First step: clear temp directory
  Type %temp% term or search programs and files of field
  Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  Proceed to step 2 below
  Second step: downloaded and extracted to your system:
  1 download the drivers and full software features
  Complete features Officejet 5510 software
  2. once the download is complete, double-click the file to extract the software.
  3. when the installation window opens, press the Cancel button to stop the installation
  4. tap folder in the race or search programs and files of field
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. right click on the folder and select copy
  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
  8 open the 7z, that you just copied on your desktop
  9 open the Util folder
  10 open the CCC folder
  11 start the uninstall_L4
  12. once the uninstall is complete, restart the computer
  13. run disk cleanup from the tools Accessories\ system under all programs folder
  14. download and install the latest version of Adobe flash player
  Adobe Flash Player
  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan? Also, if there are errors or messages just them down and let me know.

• Reinstall the printer software?

  I have a HP Envy printer which has worked beautifully for a few years on my Windows 7 desktop pc. All of a sudden, it does not print. Message says it is 'offline', but the printer says it is connected to the home network. I see that an icon in the notification area indicates that the scan to PC app is "not available".

  Interestingly, I can print from a laptop Windows 7, which has been installed from the same CD - and notice it says "Scan - to - PCActivation App works ("Scan of the computer is on.").

  I was hours with a HP one after another tech support person. They made me pay $99.99 in advance, through all sorts of help desk services, and then abandoned. Whenever I asked a technical support if could perhaps help to uninstall and reinstall the printer software, they dismiss the idea. The fact that I can print from another computer seems to exclude a printer problem. Do anyone think?

  Download the drivers from the site / install them. See if they work.

  I have reinstall the printer, but I also disconnected and reconnected the router. The problem has been fixed, but unfortunately, I can't be sure who did the trick. However, I strongly suspect that my intuition, encouraged by your suggestion, was correct, and that the relocation of the "worked" printer software Thank you very much.

• Lack the HP (Officejet Pro 8600 Plus) utility. no need to reinstall - cannot uninstall the printer software

  I had to wipe my iMac and resinstall IOS Mavericks (10.9.5).  Printer (Officejet Pro 8600, 9N11g) works, but won't scan (double-clicking icon in "original item cannot be found") and the HP utility on dock icon is absent, replaced by a "?."  I found instructions to uninstall the printer software so I can reinstall... but there is no longer any HP or "Uninstalling HP's" on my Mac HD folder.  Not there at - it a HP folder in the library/printers folders.  Research Spotlight shows no HP or Hewlett-Packard folder on my hard drive.

  I downloaded a 'HPPPrinterDrivers3.0.dmg' and ' HP-Injket-SW-OSX - Mavericks_v12.34.37.dmg, "which I'm hoping will contain updated software/drivers to reinstall the printer and I hope as the HP utility so I can resume the scan function, but I can't understand how to remove the current printing software, and I don't know if those are the files migrate to use.  I understand just remove the printer will not be enough.

  Can someone provide step by step instructions how uninstall the software and installation (since I don't know if I have the correct dmg files)?  Thank you.

  Hello

  First I offers to repair disk permissions, and then try to reinstall the HP software.

  Follow the steps below to repair disk permissions:

  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Once you are finished, run the HP-Injket-SW-OSX - Mavericks_v12.34.37.dmg and follow the instructions on the screen, be sure to select the option of Scanning HP when installing to get all the features of the software.

  Please, try the above steps and let me know the results,
  Shlomi

• Printer error "make sure that the printer software is installed and activated this scan from the computer via the printer software.

  Original title: print printer print

  I try to analyse some documents in pdf format, which I can send an email. It works fine last night but this morning I receive a message that says make sure that the printer software is installed and that this scan on the computer is enabled via the printer software. BN

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function?

  The printer software e-all-in-one-HP Deskjet 3520 includes scan-to-searchable PDF function? I installed the full version of the software, and this isn't a scan option, only standard PDF. If it is not included with the not on this model is an alternative HP printer software that would work with this printer and if not, is there an all HP designed for home or small office printers still have this feature?

  Hello

  Please visit the following link:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/does-the-HP-OfficeJet-4620-e-all-in-one-printer-software/m-p/2821615

  Kind regards.