Installation of the system to remotely crash.
Apparently, my PC is controlled remotely, but how and by which is subject to investigation, which I would ask you please your help on.
I tried to reformat again, but this time I had to surf the start-up problems, since I had starting problems and apparently my pc is executed before even my installation cd is on (CMOS kept on changing the settings).
Passionate, Salvation
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP forum.
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
Tags: Windows
Similar Questions
-
Format my laptop without installation disc, the system repair disc or the system image.
I'm 15 and I need to clean my laptop HP Compaq because it's painfully slow; I have no disk Windows installation, without additional disks except the system (C :) and recovery (r :)) and I cannot create a system repair disc OR a system image.)) I lose my sanity in this laborious process, please help me!
Have you ever run the Norton removal or the McAfee Consumer products removal tool?
Did you know you can use the hidden restore partition to do a clean install of Windows? CF. http://support.hp.com/us-en/document/c01867418
-
Driver installation error: the system cannot find the specified file.
I recently bought a Logitech G930 Wireless Gaming Headset and I don't get the "system does not have the specified file." When I try to install the drivers for the device.
I installed the software on the CD and the software that I downloaded from the download page on their Web site. The drivers for the volume etc. scroll work, only Audio USB driver that does not work. I tried to clean up the temp, restore to a point of restoring etc., same problem. Unable to get all the sounds so far. I have no changes that would address the issue that I know, and I've been redirected here by Logitech support staff that I was able to install it on another PC.
Help is very appreciated.I solved.
Created theC:\Windows\System32\DriverStore\FileRepository\lgsh_usb.inf_amd64_5d791964aedb188e\folder repeatedly mentioned in the newspaper and copied all the files there. Then do the driver installation program find the driver in the C:\Windows\System32\DriverStore.Credits http://www.ocztechnologyforum.com/forum/showthread.php?106837-Cant-install-driver&p=765465&viewfull=1#post765465^^ Kudos to this guy. -
Re: 9 system and installation of the system 11
Hello
In my pc, I installed the system 9. Now, I could install the system 11 in the same environment.
Kind regards
YvonneHi Yvonne,
Although I understand your intent
-Install both versions on the same machine/OS at the same time-
I highly recommend you do not try what you think.
It would be a quite exaggerated.
Quite simply (and better) either.
Every single system is very complex because it is clean.
Surely things will be overlap in some way - paths, services and a bunch of other things you can think.Honestly - do not!
André
-
installation of the system problem
I have an acer aspire one and I did a second system restore because I could have been a victim of software counterfietting. and since then. my laptop has not been able to function. Whenever I try to stop it and turn it back on, he repeats to me Setup starts service. It doesn't let me do anything. In addition to this, the installation program has been from services for about a week now. Does anyone know how to fix this?
Hello
This is the guide that you follow to do a restore to factory with an Acer:
http://Acer.custhelp.com/app/answers/detail/A_ID/2631
Once you do this you then download the latest drivers for your model on the Acer site:
http://us.Acer.com/AC/en/us/content/drivers
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
With updates after reinstalling make sure you have the latest Service Packs installed:
Then download the rest of Windows updates.
Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.
It will also tell you which SP you have installed.
Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.
Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30
Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299
Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468
Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669
This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.
http://support.Microsoft.com/kb/947366
See you soon.
-
Printer installs, Soft ware installs, but the system will not set up
Install the printer drivers. The software installs but get fatal error when the final configuration. Journal of ERRO is long but starts with stuff on can't find X:\hpzius.inf. The file is in programs and temp of the yser. The end of the log with windows of thought in plugging doen. I turned off the screen saver and power saving options. Tried the standard options troubleshootoing.
I finally solved the problem, but it cost me time and too many cigarettes. Solution here will
Note, I have only a peripheral HP and and computer Acer kind that relate to all HP and Hewlett Pakard file
1: uninstall all HP that was installed software
2. check all the HP software uninstalled on the uninstall program system (in Control Panel)
3 delete the HP files in program files
4 wire HP removal on the program data (it's hidden)
5 remove the files in user/AppData/Local/Temp (still once hidden)
6. check the file permissions for the program, the program data and Temp files and change the box administrator to send down to subfolders and files.
Ready to reinstall.
7 right-click on installdownload and select run as administrator.
8. follow the directions as usual and voila it installs
-
Libretto W100 - 10 d - 3 G Module does not work after the installation of the system
Hello
I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.
After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!
It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!
I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)
Can someone help me so that the 3G module working in return?
Of many tanks and best regards
Hello
Have you checked the settings in the BIOS?
To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.To access the BIOS press ESC and F1
Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
This is the driver for the 3G module. -
Cannot complete the installation of the system upward. Error Ox81000037
Get weekly mssage return incomplete place try again. Error Ox81000037. Any help? Thank you
Hello
What version of OS are you using?
I suggest you consult the information referred to in the question of article 2 in the site mentioned below:
-
Hi, I was wondering if someone can help me on this topic. Our company has moved from Essbase 7 to Sytem 9.3.1.
servers Server/essbase administration and common services have been implemented. For the moment, we start the server lighter wiondows as opposed to services to present in order to get the correct boot sequence. We start the server services sherred first, followed by government services (aas tomcat) followed by the administration server.
connection to the administration via EAS server is thin, it is that it is connected but when connecting to the server real essbase we get the following error:
error [10061] network: unable to conect to [my IP]
the customer has timed out waiting to connect to the agent of services of anaytic using the TCP/IP protocol.
check your network connections.
R. make sure that the server and Port are correct.
We are a bit lost with this right now if im asking the world :-)
Any help would be greatIf you are using Windows, you may need to adjust the TCP parameters. See this article by Tim Tow for more details: [Essbase API Error Fix | http://timtows-hyperion-blog.blogspot.com/2007/12/essbase-api-error-fix-geeky.html]
-
Monitor the files installed in the system by the installer
Hi all
I have a program to install my application built through LabVIEW. I need to follow as *.dll files and other files that are installed on the system.
Can we get a list of the files installed by the installer on the system for the purpose of monitoring?
Thank you.
Parag - D
-
This problem started a week ago, say at the time of the June 8 fix release. I think the relevant in case the log message is 'detected bad event COM + a system code back during internal processing. HRESULT is C 8007043 line 45 of d:\longhorn\com\Complus\src\events\tier1\eventssystemobj.epp. Error report, please contact Ms Product Support Services. "However, when I contacted MS, they would not help without paying the fees because it was an OEM installation. The system remains upward after the stabilization of the system going on in SafeMode after cold start, close and then switch to normal mode. However, once launched, it seem (ed) as the hard drive light was permanently. I did a restore to June 8, most early I could continue. The hard drive worked without interruption after that. I did a forced sleep and restart and the system froze again. With this in mind, I wonder if .NET patches that were released were running somehow at the time of sleep and that he could not recover. OR, during sleep, the system was made of updates and the system has been disabled, corrupting the updates. I looked at the Windows Update settings and it has been set to automatically install updates. It is quite possible that the user did not know and did not recognize there are pending updates. Maybe updates were not correctly packed in order to manage a system from going into Sleep Mode, while they were installing. In any case, any who would provide help on how to identify the problem and fix it. There may be registry entries need to be corrected?
Duane G. Leet, Ph. d. 45 years of experience in technology
Microsoft support has provided a solution. Here is the procedure:
We can run reset Windows Update Tool and system update tool to detect incorrect manifests, files or data from the registry. Please follow the steps below.
Step 1: Launch the tool to reset Windows Update and the update of the system tool
====================================
1 download and run reset Windows Update Tool from the link below:
http://go.Microsoft.com/?linkid=9665683
2 download and run the update tool of the system from the link below depending on the Type of system:
Update for Windows Vista 32-bit system tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=b4d90b06-c27d-4483-bc1f-04d43fa7b293&displaylang=en
Update for Windows Vista 64-bit system tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=f6f353c0-d00e-43e7-97EF-0feefc7ff064&displaylang=en
Note: It may take an hour or more time to detect and replace the erroneous data, please be patient. When it is finished, restart the computer and reinstall Windows Vista SP2.
If Windows Vista SP2 can not always be installed, I suggest to download the stand-alone Installer and install it in clean boot Mode.
Step 2: Download the installer of Windows Vista SP2 Standalone
===========================================
1 download the installer of Windows Vista SP2 Standalone from the link below depending on the Type of system:
Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 32 bit (KB948465) (475,5 MB)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d&displaylang=en
Windows Vista Service Pack 2 - version independent ALL languages for Windows Vista 64 bit (KB948465) (745,2 MB)
http://www.Microsoft.com/downloads/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3&displaylang=en
Step 3: Install Windows Vista SP2 in clean boot Mode
=========================================
Please disable all startup items and services of third parties at boot to avoid conflict when installing Windows Vista SP2.
1. click on 'Start', type: MSCONFIG in the search box and press ENTER.
Note: Click 'Continue' if the "User Account Control" window appears.
2. click on 'Services', check "Hide all Microsoft Services" and click on 'Disable All' (if it's not gray).
3. click on 'Start', click 'Disable all', click 'OK' and restart the computer.
Note: Disable temporarily the startup group only prevents the start up programs from loading at startup. This should not affect the system or other programs. We can manually run these programs later.
4. double-click the downloaded standalone installer and follow the instructions to install Windows Vista SP2.
To restore the computer to a Normal startup, repeat step 1 above. Then click "Normal startup" in the general tab, click on "OK" and restart the computer.
If there are any questions or concerns, feel free to let me know. It is my pleasure to be useful.+++++++++++++++++++++++++++++++++++++++
The cause was not determined, but evidence tends to a disturbance in the download or installation process, with one of the errors in the event log is an error in checksum on one of the modules. With a large file, 745 meg, the mean time to failure on a LAN network is probably shorter than the download time. The installation process was probably longer than the time that the system has increased... Corrective actions for Microsoft could include more small download / install, not allowing an automatic installation for automatic download over a certain size, or deal with the best controls during installation to intercept the checksum error. Duane G. Leet, Ph. d. 45 years of experience in technology -
Language of the system during the upgrade / installation W10
I am a British expat living in the Netherlands.
When I bought this system, I asked the vendor to install W 7 64 bit Pro English, which he did. Shortly after the installation of the system at home, he developed a hardware problem, which means that the supplier had to re - install the system.
However, it has installed the Dutch version of the system. Because I had not the time (or energy), due to illness, so that the English system replaced, I have either. Now, with upgrading to W10, I dearly wish I could install the English language version.
I understand that the upgrade software detects the current language of the system and uses the same language for the installation of the W10.
Is there a way to get around this? Although I understand and speak Dutch, I find the use of the language in the system extremely disturbing and sometimes difficult to decipher.
Looking forward to a positive response.
Option 1: you may install the English Language Pack:
How to install and change of languages in Windows 10 - groovyPost
Option 2: Download and reinstall Windows 10 in the language of your choice:
-
How can I change the language of the system?
Hello
Installation of the system, I chose the wrong language (in English)
Now, I want to change in German.
Thanks for any help
René
System Preferences > language and region
Click on the "Plus sign" to add German.
-
Install OR Vision on the system in real time
Hello
I am trying to install NI Vision RT and NOR-IMAQ RT on my controller PXI-8108. However, I still get an error, there are unresolved dependencies and that some version of NIVISSVC is necessary.
Does anyone know a solution to my problem?
Is this problem related to the problem described in the knowledge base (Document ID: 46PK6PP6)?
Some data from my host system:
-LabVIEW 8.6.1
-Measurement & Automation Explorer 4.6.1
-NI Vision 8.6 (treatment of Image and Machine Vision, and Services)
NOR-IMAQ 4.1
OR-IMAQ I/O 2.2
NOR-IMAQdx 3.2
The PXI controller:
PXI system (OR PXI-8108)
PCI-GPIB
-Chassis 1 (PXI-1042 (q)
PXI-6733
OR PXI-8432/4
PXI-6233
Thanks in advance for your help
Bernd
After installing Vision 9.0 and NOR-IMAQ 4.4 on my host, I had no more problems with the installation on the system in real time.
-
I have a boot sector virus (Troj/MBroot-H) that I can not remove from my computer without losing access to my HARD drive due to a custom boot partition. I can't afford to repair or replace the computer I have at the moment, so I try to disable things as much as possible to neutralize this virus. I have already downloaded Malwarebytes and analysis had revealed 18 registry viruses and files that have already been removed from the system. The HelpAssistant account and its files have been deleted from the system.
The only thing left to change is the firewall of Windows XP. I currently have to restore Windows Firewall to its settings by default whenever I restart my computer because the virus has configured the system to add more 'services' and 'management' objects in the list of Exceptions whenever the system is restarted. If I don't do that an outside source will invade the system via remote desktop and add the HelpAssistant account and the file. I need to know how to replace system orders that creates these objects for additional exceptions during the restart. I want to restore full contol on the firewall of Windows XP by allowing not exceptions except those I choose. Is there a Window XP Firewall registry key or file that can be removed, replaced or changed to keep these elements to be added to the list of exceptions?
Thank you
Spacejunkie1
The computer is still severely infected and you will not be able to "establish complete control over the firewall of Windows XP". Backup your data and do a clean install of Windows. I understand that you do not want to hear this, but it is, IMO, the answer. Please specify your first sentence if you need assistance.
http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at handMS - MVP - Elephant Boy computers - don't panic!
Maybe you are looking for
-
MacBook Air how to extend the timer
I listen to a tape of meditation 1 hour and 14 minutes and it stops after an hour How can I extend the timer to last more then 60 minutes? It's a Mac Book Air 13
-
What I have to do. I ahm runing a HDD test through the Setup utility. Error of a hard drive failure. Does this mean that I lost everything on my computer? I need to replace the hard drive? HP G60 laptop p/n nbo41ua #aba
-
This morning I found that my laptop had not finished closing 8 hours ago. I stopped by pressing the button Off for 6 seconds and restarted. I then looked a likely cause and saw that a BIOS problem was probably the cause. I'm went to the site of HP su
-
HP laptop - 15-ac030nd: little burst in the form of laptops
Hello! My laptop is fairly new, like a month. So I'm at school at the moment and my laptop, which was up my sleeve, just fell on the ground. Total panic! So my screen broke a little on top of my screen. So I would like to know if Hp will cover the co
-
I bought dell inspiron 3521 a few days ago. When I try to make the payment via the site www.billdesk.com page does not load. But the same page to load in other laptops. Please help me solve the problem