installation of update of signature for JOINT-2 AIP - SSM
Hi every one, im not sure about this issue but I think its beter ask you experts.i want to know that if I update the signature for example for my JOINT-2 can I install this update of GIS on my AIP - SSM--> assume that software IPS on both devices are same and I also installed the license key valid on AIP - SSM.now can I do this or not? and I know that if you do not license installed on JOINT-2 you cannot install any point of GIS on JOINT-2 but this topic AIP - SSM? I want to say I can install updated GIS on AIP - SSM without installed the license key valid on AIP - SSM? Thank you
There are 3 main types of Signature updates.
(1) IPS sensor Signature Update
(2) updates of Signature CSM for IPS sensors
(3) signing IOS IPS updates
The IPS Signature Update file name is in the form: IPS-GIS-Sxxx-req - Ey.pkg
That's probably what you are referrnig to in your message. This file can be installed on ANY device IDS/IPS or Module.
Here, the requirement is not the platform but rather the level of the engine. The part "req - Ey" in the file name indicates that the sensor has already run the 'y' the software engine level.
If a file IPS-GIS-S436-req - E3.pkg can be installed on any IDS/IPS device or Module as long as the software on this sensor is a version of the 'E3 '.
The CSM updates are updates of signature for the Cisco Security Manager. They contain special files that SCM uses to update, and then also included in the JLC update is the update of real sensor described above. CSM unpackages the CSM update, updates and then uses this file embedded to upgrade the actual sensor.
The third type of file is for routers IOS loaded with the special IOS software that has the distinction of IOS IPS where the router itself (instead of a separate module of the IDS/IPS) keeps track of the signature.
These updates to the signing IOS IPS settle on the real router and are not installed on the Modules or the sensor IDS/IPS devices.
So to answer your question, yes the same Signature Update for your JOINT-2 is the exact same Signature Update for your SSM modules.
The same exact file is available through several different paths on cisco.com. But no matter which way cisco.com you have downloaded the file, you can always install it on all the Modules and the IDS/IPS Appliances.
With respect to licensing, the license works the same on all Modules and the IDS/IPS Appliances. A license must be on the sensor for the Signature Update to apply.
NOTE: A trial license is available at cisco.com for new sensors to allow you to get everything set up properly for your sensor to be covered by a service contract and get the standard license for the service contract.
Tags: Cisco Security
Similar Questions
-
I'm doing a fresh install of Windows XP Edition family on a new hard drive. I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX
Hello
I suggest you try the steps from the link below and check if it helps.
http://support.Microsoft.com/kb/307153
Hope this information is useful.
-
some of the recommendations tried re: msconfig, but did not work. Any help would be appreciated.
Hi thomasnixon,
1. have you tried to install the manully updated?
You can try to install the update manually and check.
Check out the link:
If still face problems, you can read the following article and try to reset the Windows Update components and check.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Hope this information is useful.
-
Failed to update of the signing of the AIP-SSM-10
I hope someone can help me, I am unable to get the signature autoupdate working on our ASA 5510 IPS. We have a valid support contract, our user name does not include and special characters, and I am able to download the files of signature on the site by using our BCC.
When trying to get through Auto/cisco.com update if I get the following in the event logs each attempt update:
evError: eventId = 1319467413849005289 = severity = error Cisco vendor
Author:
hostId: xxxx
appName: mainApp
appInstanceId: 354
time: October 26, 2011 11:40:01 UTC offset = 60 timeZone = GMT00:00
errorMessage: AutoUpdate exception: failed to connect HTTP [1 111] name = errSystemError
I've included a conf 'show' and a 'facilitator stat"below.
See the XXXXXX conf #.
! ------------------------------
! Current configuration last modified Wed Oct 26 10:48:07 2011
! ------------------------------
! Version 7.0 (6)
! Host:
! Domain keys key1.0
! Definition of signature:
! Update of the signature S604.0 2011-10-20
! ------------------------------
service interface
output
! ------------------------------
authentication service
output
! ------------------------------
rules0 rules for event-action service
output
! ------------------------------
service host
the network settings
Host-ip 10.x.x.x/24,10.x.x.x
hostname xxxxxx
Telnet-option turned off
access-list 10.x.x.x/32
access-list 10.x.x.x/16
access-list 10.x.x.x/32
primary-active DNS server
address 10.x.x.x
output
secondary-server DNS disabled
tertiary-disabled DNS server
output
time zone settings
offset 0
standard time-zone-name-GMT00:00
output
NTP-option enabled-ntp-no authenticated
Server NTP 10.x.x.x
output
Summertime-recurring option
Summertime-zone-name GMT00:00
Start-summertime
last week of the month
output
end-summertime
month October
last week of the month
output
end-summertime
month October
last week of the month
output
output
automatic update
Cisco-Server enabled
scheduling periodic-calendar option
beginning 00:40:00
interval 1
output
username xxxxxxxxxxxxxxx
Cisco-url https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl
output
output
output
! ------------------------------
service recorder
output
! ------------------------------
network access service
output
! ------------------------------
notification services
output
! ------------------------------
Service signature-definition sig0
output
! ------------------------------
Service ssh-known-hosts
output
! ------------------------------
trust-certificates of service
output
! ------------------------------
web-server service
output
! ------------------------------
Service-ad0 anomaly detection
output
! ------------------------------
service interface external product
output
! ------------------------------
health-monitor service
output
! ------------------------------
service global correlation
output
! ------------------------------
aaa service
output
! ------------------------------
service-analysis engine
vs0 virtual sensor
Physics-interface GigabitEthernet0/1
output
output
XXXXXX # host stat
General statistics
Last updated to host Config (UTC) = 27 October 2011 08:27:10
Control device control Port = GigabitEthernet0/0
Network statistics
= ge0_0 link encap HWaddr 00:12:D9:48:F7:44
= inet addr:10.x.x.x Bcast:10.x.x.x.x mask: 255.255.255.0
= RUNNING UP BROADCAST MULTICAST MTU:1500 metric: 1
= Dropped packets: 470106 RX errors: 0:0 overruns: 0 frame: 0
= Dropped packets: 139322 TX errors: 0:0 overruns: 0 carrier: 0
= collisions: 0 txqueuelen:1000
= RX bytes: 40821181 (38.9 MiB) TX bytes: 102615325 (97.8 MiB)
= Address: 0xbc00 memory: f8200000 of base-f8220000
NTP statistics
= distance refid st t when poll reach delay offset jitter
= * time.xxxx.x 195.x.x.x 3 u 142 1024 377 1, 825 - 0.626 0.305
= L LOCAL (0) LOCAL (0) 15 59 64 377 0.000 0.000 0.001
= ind assID status conf scope auth condition last_event cnt
= 1 43092 b644 Yes Yes No sys.peer 4 available
= 2 43093 9044 Yes Yes No accessible release 4
status = synchronized
Memory usage
usedBytes = 664383488
freeBytes = 368111616
totalBytes = 1032495104
Statistics of Summertime
Start = GMT00:00 03:00 Sunday, March 27, 2011
end = GMT00:00 01:00 Sunday October 30, 2011
Statistics of the processor
Its use in the last 5 seconds = 51
Its use during the last minute = 44
Its use in the last 5 minutes = 50
Memory statistics
Use of memory (bytes) = 664383488
Free MEMORY (bytes) = 368111616
Auto Update Statistics
lastDirectoryReadAttempt = 08:40 GMT00:00 Thursday, October 27, 2011
= Reading directory: https://198.133.219.25//cgi-bin/front.x/ida/locator/locator.pl
= Error: Auto update an exception: failed to connect HTTP [1 111]
lastDownloadAttempt = n/a
lastInstallAttempt = n/a
nextAttempt = GMT00:00 09:28 Thursday, October 27, 2011
Auxiliary processors installed
Thank you very much.
Your error message indicates "HTTP connection failed."
Management interface you can access the internet via HTTP sensor?
You have a proxy between the sensor and the internet?
Can you ping the sensor to open internet IP addresses (like google.com)?
-Bob
-
Hello
I need help for error of update of address 3 for Vista security:
(1) 800719E4 error during the installation of update of security for Vista (KB972270)
(2) Cummaltive security for Internet rexplorer 7 Vista (KB978207)
(3) Microsoft.NET Framework 3.5 service pack 1 and the .NET Framework 3.5 Family Update (KB951847) x 86Thank you
See the section "How to get help", for example, http://support.microsoft.com/kb/972270
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Automatic update AIP-SSM-10 and ASA 5510 (Beginner)
I see that it is possible to automate the updates of the ASA 5510 and AIP SSM via FTP on my own server. Is it possible to automate the download directly from Cisco.com?
Thank you!
Jeremy
Jeremy, the answer to your question is correct, as far as the Cisco products are concerned. So I wrote a PERL app that does exactly that, and I published an article about it in the June 2007 issue of Sys Admin magazine. Here's the article online: http://www.samag.com/documents/s=10128/sam0706a/0706a.htm
And it is also on my site, with a tar of scripts to:
http://www.LHB-consulting.com/pages/apps/index.html
Good luck.
-Lisa
-
Windows Update has appeared today when we started one of our machines, informing us that there are some installed updates. After reviewing the updates, we clicked on the "Install now" button, and immediately, it failed with the above error code.
I tried to run regedit a reason unrelated, and it came with a dialog box error with "Windows cannot verify the digital signature for this file. A recent hardware or software change might be installed a file that is signed incorrectly or damaged or maybe it's a malicious software from an unknown source. »
After researching here and elsewhere on google and did not find anything suitable, put us in the Win7 disk, recovery tools and tried to go back to a previous system restore point (3 days).
The restoration went well, restarted, but the problem persists.
Then, we just tried to install anti-malware software, but when trying to run the installer, we get a different error message indicating 'ShellExecuteEx failed; Code 577 "and then the same message on the verification of the digital signature.
The computer is running fine all yesterday and has worked very well since just after the new year when he has been upgraded to Windows 7. No material changes have been made, and no software changes were made by users in the course of last week.
The computer is an AMD Athlon II X 4 with 4 GB of RAM on a motherboard Asus M4A78-EM, linking a 64 GB SSD, with a 250 GB drive SATA data/programs. GPU is a Nvidia 260, and it has a CD and DVD player as well. It is connected to our router using the gigabit ethernet interface motherboards.
It was under windows 32 - bit XP SP3 up just after the new year. When we put in place the new SSD to replace a hard drive older than we have did a new install of XP (slipstreamed with SP3) and then used the upgrade 32-bit W7 Home premium DVD version to upgrade the system. Since then, the system runs flawlessley.
On the machine is MS office XP, Firefox 3.6.3, AVG 8.5 and a few games such as the Turbine DDO.
The main user account used to try to solve these problems and to run Windows Update and try installing programs is a member of the Administrators group.
Firefox works fine, serve, and he plays the games installed very well also. AVG reports to date, with no problems and has detected no threat.
However, try to view the registry with regedit, or start Viewer event or compmgmt.msc that all do appear the message "cannot verify the digital signature.
***************************************************
Can anyone offer an opinion on what might be wrong with this facility please, and how we could do to solve?
Cannot run chkdsk/scandisk as he bought the message "cannot verify the digital signature" etc etc.
This morning, the machine began to behave differently - stop playing back badly, refused to start Device Manager, open Control Panel correctly etc.
So, I reset the BIOS to boot from the CD-ROM, slapped XP SP3 in reinstalled, then upgraded to Win 7 again.
Still have no idea what caused the problem, but it seems to be gone now - reinstalled the same applications, AV / programs anti-malware, games, etc and everything seems to go fine now.
* shrug *.
Computers.
-
Original title: error upgrading and installation of iTunes 10.5 for Windows 6.
I tried all kinds of ways to solve this problem, but I can't seem to find a solution. This all started when I tried to update my iTunes to version 10.5. Then came the error message 7 on unidentified signature etc. I could not even run my iTunes more then. I started download iTunes again to repair and it just doesn't work. I don't have problems with the installation of my iTunes for the first time a year ago and upgraded whenever I allow it.
All other methods I tried to correct the error includes:- Uninstall iTunes completely and everything that it supports the programs and files (Quicktime, supporter of Mobile, Hello, Safari etc.)
- Download Quicktime separately after you have uninstalled it as suggested by other users in some forum.
- Update the frame Microsot.NET as suggested by the Apple Support site.
Manually started the installation of such Windows program suggested by one of the answers on this site:
a. click the Start button, and then type services.msc in the start search box and press ENTER.
b. Locate the Windows Installer service.
c. check that the status is started. If the condition column is empty,
d. right-click on Windows Installer, and then select start.
e. If you get error trying to force start the Windows Installer service, then try to change the Startup Type to automatic.
f. restart the computer.I have tried for at least 10 times and I have not yet set and am frustrated. Would be really grateful a solution to this soon.
Windows Version: Windows Vista Home Premium - Version 6.0 (build 6002: Servie Pack 2).
Thank you.
Hi Junetyl,
What is the complete error message you get?
Method 1:
You can see the article next to the Apple support and check if it helps.
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7
You can also consult the following article:
iTunes for Windows: "Error 7" message when you open iTunes
You can also try the following steps and check.
Method 2:
You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.
For more information, you can consult the following link.
Method 3:
You can also perform a clean boot and check if you can install iTunes.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.
You can also get in touch with Apple using Arthur support.
Hope this information is useful.
-
Original title: optional update Canon printer FAX
I installed a Canon printer and installed an update about it (FAX) on 10 times that he says was a "successful installation". Then I run the update again, and it appears again as an optional installation. Why?
Hi TerryNobleUJ,
1 Windows operating system you are using?
2. What is the number of the printer model?
You can see the links in Support of Canon and try to download and install the latest version of drivers for your printer.
http://www.USA.Canon.com/Cusa/support
http://www.USA.Canon.com/Cusa/support/consumer
After you have installed the drivers manually, restart the computer and check if it is available in the windows updates.
For more information, see the article:
-
My Office Windows XP SP3 has been "glued" on stop, installation of update 6 of 12 for 15 hours and counting. I'm worried to turn it off because I don't want any major problems if it works again.
Can someone please advise on what I have to do to go even faster.
Thanks for any advice in the meantime.
As a result of the survey above. I 'bit the bullet"and shut down the computer and no damage seems to have been made.
Time will tell I suppose. Thank you
-
Has no significant updates for VISTA SP2 security installation: MSXML 4.0 SP2 (KB927978) security AND (KB954430), citing error Code 652, Windows Update encountered an unknown error! How is it Windows Update does not recognize it's own mistakes? I tried several times to install both of these important updates without success. Please help me so that I can install these two updates & get back on the right track. Thank you!
See the section "How to get help", for example, http://support.microsoft.com/kb/927978
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Installation failure: Windows failed to install the following update with error 0 x 80070663: update of security for Microsoft Office System 2007 (KB972581).
any ideas?
Suggestion: Try to do a repair of Office 2007 installation, then try the updates (after a reboot).
How to install and repair 2007 Office features
http://support.Microsoft.com/kb/924611 TaurArian [MVP] 2005-2010 - Update Services -
If I use automatically via Windows Update or installation manual, installation of update for Microsoft XML Core Services 4.0 Service Pack 2 (KB973688) always fails with error code 643. Windows Update Troubleshooter can't find anything wrong.
Error code 643 take a look at this thread as it relates to this issue.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Installation of updates on Shut down taking more than 1.5 hours for 1 update
Hello - I just bought a Vaio VGN - SR yesterday with Vista Professional on this topic.
I did very little for it, except that I installed Office, Firefox and Webroot AntiVirus. At the stop, he wanted to install updates 20 - he is now trying to install the 5 / 20 update and tried during the last 2 hours. It did not crash - the wheely thing always moves as the points after the "installation of update 5 of 20.
Help, please!
Thank you
JHi Jo,.
Welcome and thank you for viewing on the Microsoft Answers community forum.It is normal to take a long time to install the updates, but more than 1 hour to install an update is not normal.
However, you need not worry. All you have to do is to try to restart the computer. First try to restart the computer in normal mode and check if it progresses to install some other updates. Otherwise try to reboot again in safe mode.
Note: You can get the safe mode by pressing the F8 key repeatedly when the first screen displayed (after you turn on or restart the computer). Then, by choosing the option of safe mode.
After going to safe mode, installation, updates should be fine.
Please try these and keep us updated on the status.
Take care.
Kind regards
Cedric M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: Why microsoft tells me critical update that has '0' K '0' time to load? It's stupid
A security update cumulative for Internet Explorer 8 for Windows XP (KB2744842)
Last published date: 21/09/2012
Security issues have been identified that could allow a malicious user to compromise a system running Microsoft Internet Explorer and to gain control. You can protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer.
The system configuration required
CPU recommended: not specified.
Recommended memory: unspecified.
Recommended hard disk space: unspecified.How to uninstall
This software update can be removed via Add/Remove programs in Control Panel.Get help and support
http://support.Microsoft.comMore information http://go.Microsoft.com/fwlink/?LinkId=255505
Installation failure
Error code: 0x8007F01F
Try to install the update again, or seek help from one of the following resources.
For self-help options:
Frequently asked Questions
Find Solutions
To support options:
Microsoft online assisted support (toll-free for questions related to getting updates)
Review and install updates
Install updates
Download size (total): 0 KB *.
Estimated at your connection speed: 0 *.
(* Downloaded; ready to install)Restore and check again
Only selected updates will appear the next time you check the updates.
High priority updates
Microsoft Windows XP
A security update cumulative for Internet Explorer 8 for Windows XP (KB2744842)
Download size: 0 KB 0 minutes (downloaded; ready to install)
Security issues have been identified that could allow a malicious user to compromise a system running Microsoft Internet Explorer and to gain control. You can protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer. Details...Hi Robert1775,
Thanks for posting your question in the Microsoft Community. We are happy to help you!
From your problem description, I understand that you are unable to install the update to Internet Explorer 8 (KB2744842) and the error is 0x8007F01F. Please correct me if I misunderstood the question.
Before troubleshooting, I need to ask a few questions.
- Are you facing this problem with this update or with all the updates?
- What is the full error message?
- Did you recent hardware or modifications to the software on the computer before this problem?
To solve the problem, try the methods and check after each method:
Method 1: run the Microsoft Fixit to solve the problem with Microsoft Windows Update is not working.
http://support.Microsoft.com/mats/windows_update/en-us
Method 2:
You cannot install some programs or updates: http://support.Microsoft.com/kb/822798
Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/
Warning: Before you perform an upgrade in-place, you must be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before performing an upgrade on the spot.
Method 3: Try to download the update and install it manually:
Update cumulative security for Internet Explorer for Windows XP (KB2744842):
http://www.Microsoft.com/en-US/Download/details.aspx?ID=34735
If the problem persists, post your reply with the results. We are happy to help you with the advanced troubleshooting steps.
It will be useful.
Maybe you are looking for
-
Hello, I recently blocked because of what I don't know maybe someone sent SMAP ask to unlock the [Redacted for privacy] Skype account login First things first: for your security and protection, please, never never include any personally identifiable
-
4GB SD Card is reading as 1 GB on Equium M40X
I have a m40x, bought a SD 4 GB agl, formatted using the toshiba format utility, now it reads 1 GB
-
Stop command missing in xp home Task Manager menu bar
Have file, Options, display, Windows, help in the menu bar. Stop command and the menu link drop down corresponding disappeared. Another xp pro system has this command. How to repair or restore? Current running XP Home Edition SP3, recent updates to
-
Greetings! I bought this computer a few days ago (Inspiron 3847). I installed a new Samsung 840Evo SSD. I used the Samsung Data Migration software to transfer the plant to the new SSD. drive, then removed the drive from the factory. This went without
-
We need access to the features limited on the device. Device permissions, the application requires can be specified in the application BAR descriptor file. Is there a way to check if the permissions are denied or allowed by the user? The API provides