Installation of updates of Windows 8: failure! Error: 800F082F

Similar Questions

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)

• My system installs the updates of windows, whenever I stop

  My system installs the updates of windows, whenever I stop.  What should I do to prevent this?

  See: http://support.microsoft.com/kb/910339 . All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

• Defender Update KB915597 window failed. Error 80070670

  Defender Update KB915597 window failed.  Error 80070670 dated 19 October 2012.  What should I do to re - install?

  I'm a bit confused.  How does it install the update failed ?

  The definitions change fairly regularly. Download and install the latest update of definition or open defender and check updates.

  The update has failed most likely now is obsolete. You want the most recent update.

• When I try to check the updates of windows I get error a 8024, 000.

  * Original title: cannot install windows updates

  Hello!

  I hope someone can / will help!

  When I try to check the updates of windows I get error 8024a 000

  and cannot verify or install

  Windows 8

  I ran the windows troubleshooting and gives me this code.

  Thank you very much!

  Rick

  Technical details according to the here:

  0x8024A000

  WU_E_AU_ NOSERVICE

  To THE put incoming calls to THE service.

  Looks like a dependency is missing.

  Use the following tutorial to reset Windows updates completely and check if it helps:

  Reset Windows updates

  Be sure to run the script as administrator.

• Installation of updates for Windows Vista error 80070490 message code

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  I cannot install the following important updates for Windows Vista and I get the Error Message Code 80070490; can all help me please these problems?

  Update security for Windows Vista (KB2378111)

  Update security for Windows Vista (KB967723)

  Update for Windows Vista (KB2345886)

  Update for Windows Vista (KB2443685)

  Update for Windows Vista (KB970430)

  Update for Windows Vista (KB972145)

  
  

  
  

  
  

  Hey grown-sexy

  see if the below microsoft information arranges

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  If he did not correct it repost in the correct windows update forum below

  It comes to the installation of vista operating system instance

  Use the link below

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• Failure to install security update for Windows XP (KB2686509) error code 8007005 0 x.

  I recently enabled Microsoft Update for my XP Media Edition 2004 after his being unavailable for a year due to corruption Trojan. The solution that worked there was rename the CATROOT2 folder and the SofwareDistribution folder in the Windows directory in the Windows > System32 directory and reboot. This solution came from the Microsoft site. After that, I was able to download and install 50 of 51 updates. A fails repeatedly: update for Windows XP (KB2686509) security. I get error code 0 x 8007005. I tried several fixes, including one designated for error 0 x 8007003 (rename file) download at download.old as well as the use of aggressive mode on Microsoft Fixit. Always fails to update. All other updates installed correctly, including a new this morning, but of course update continues offering that failed. Any ideas on how to get this installed? This is a relatively new, so I'm not sure that the problem is that it is already there, but the first failure was around 40 of the 51 when I check the history update file. Thanks for your suggestions.

  Hello

  I suggest you consult the site mentioned below:

  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update

  http://support.microsoft.com/kb/968003/en-us.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Uunable update of Windows Vista. Error code 80070005

  I'm unable to update Windows Vista SP1 to SP2, I get the error code 80070005. ERROR_ACCESS_DENIED.

  Help, please...

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates).

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate. What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer
  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  TaurArian [MVP] 2005-2011 - Update Services

• try to download the update of windows... error number: 0x8024400a...

  try to download the update of windows... all I get is "the website has encountered a problem and cannot display the page you are trying to view" error number: 0x8024400a the... no idea on how to solve this problem?

  http://support.Microsoft.com/kb/2497281

  You may be unable to access the Windows Update site...

  You must be at the level of Service Pack 3 before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• migrate from Windows 10 failure error oxc ox400d 1900 failed in the second phase of startup with the error during operation of data on my windows desktop 7

  Windows 10 has failed 75% error oxc 1900-ox 400 d has failed in the second phase of startup with the error during the operation of the Migrate_data on my windows desktop 7 using media creation tool. Help please.

  Turn off the computer.

  Wait 10 minutes.

  Start the computer.

  The installation program automatically restores your previous version of Windows 10 or an earlier version of Windows.

  Launch the prompt with administrator privileges.

  Press the Windows key + X

  Click prompt (Admin)

  Type the following command:

  Rundll32.exe pnpclean.dll, RunDLL_PnpClean /DRIVERS /MAXCLEAN

  Press enter on your keyboard

  Exit command prompt

  Restart

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• installation of updates from windows to windows 7 after 10/25/10 makes me lose all access to the internet (wireless and others)

  I have r530i samsung that is less than 8 weeks, after that 1 week, a new set of windows udates appeared which caused my Internet to lose. I spoke to my internet provider, between us, we confirmed there was nothing wrong with the connection or otherwise (I was able to access the internet from another PC using the same provider and user name) it was suggesteed downloads had done something for my wirless modem.

  I did a complete system restore and it worked just fine.

  a few weeks later, the same problem occurred after some updates of windows. Unfortunately the fault can be diagnosed because I can't access the internet? I did a full recharge of the system of 23/10/10, this has worked fine, windows then downloaded updates and my internet access has failed once again so I have disabled the automatic updates and everything seems fine.

  all connections work well, I can still see the home hub it won't let me access the help please

  Hello

  There are various reasons for internet connection doesn't work after installing the update of windows on the computer.

  First of all, I would say that you check the update is causing the problem.

  To see the updates are installed on your computer

   

  (a) open the updates installed by clicking the Start button, click Control Panel, clicking programs, and then r undeprograms and features, click view installed updates.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually after placing the computer in a clean boot state.

  http://www.Microsoft.com/downloads/en/default.aspx

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open the automatic updates on windows xp 800704424 error page

  Unable to open error 80070424 automatic updates page

  Hi Annraftery,

   

  Thanks for posting your question in the Microsoft Community.

  From descriptions of the question, it seems that you are unable to run automatic updates with error code 80070424.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  I suggest you follow the steps in the link below and check off the question:

   

  Levonorgestrol error 0 x 80070424 when you use Windows Update, Microsoft Update, or Windows Firewall:

  http://support.Microsoft.com/kb/968002

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Update of Windows Vista SP1 error 8024200d

  Original title:

  SP1 update

  I try a Windows Vista Service Pack 1 update.  The update maintains have failed, error code is 8024200d? \

  Thanks, Judy

  Hello

  Thanks for giving an opportunity to help you with your concern for Windows to Microsoft Community!

  Method 1:

  You can consult the following before link install Windows Vista Service Pack 1.

  What you need to know before installing Windows Vista Service Pack 1

  http://support.Microsoft.com/kb/936330

  Method 2:

  You can check out the following link and check:

  Learn how to install Windows Vista Service Pack 1 (SP1)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-1-SP1

  Method 3:

  You can try to download the update from the following link and then try to install it manually.

  Windows Vista Service Pack 1 five language standalone (KB936330)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=30

  See also:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

  It will be useful.

  If the problem persists, or you need help on Windows please keep us informed.
  We will be happy to help you!

• I am not able to apply this update (security update for Windows Vista (KB2536275) error code 800b0100.

  original title: I'm not able to apply this update (security update for Windows Vista (KB2536275) it gives me a code error every time

  For Windows Vista (KB2536275) security update will not be installed.  I get this error 800b0100 code.

  Hi Lydia,.

  Have you tried running the fixit http://support.microsoft.com/kb/971058 in aggressive mode?

• recently impossible to implement the automatic installation of updates for Windows 7

  * Back in July 2015, I was able to get updates for my computer which uses Windows 7 Home Premium.

  * In July 2015, in the center of the Action, that's what he said:

  Windows Update                                                                                            On

  Windows automatically installs updates as soon as they are available.

  * Today, January 15, 2016, I thought that I would see if there was the necessary updates as I had not seen any activity since July. In the center of maintenance that the formulation has changed, it is said now
  Currently unguarded Windows Update
            Enable messages on Windows Update
  * When I click 'Activate messages on Windows Update', a box appears at the top:
  Windows Update was disabled by your system administrator.
               Turn off the messages on Windows Update
  * When I click on turn off messages on Windows Update. the box at the top goes.
  * I tried all afternoon know where to go to find the place where the system administrator (that's me) disabled the update of Windows, so I can enable / turn on.  NOTE: I don't know until it on computers knowingly do something like that.  I removed some Trojan virus in the past.

  Any suggestions on what I need to do to get "Windows install updates as soon as they become available" again?   Thanks for your help :)

  
  

  See if this helps: https://www.youtube.com/watch?v=mY7DgcJ0v3I

  J W Stuart: http://www.pagestart.com