Installation of Weblogic 10.3.6 with generic Setup on the SP2 of Windows Server 2012

Similar Questions

• Remote assistance with vWorkspace 8.0 MR1 on a Windows Server 2012 R2 with Windows 7 Enterprise VDI (RDP8)

  We have a new VDI environment with the new Version of v 8.0 MR1 Workspace and real fixes. The connection Broker and the Hyper-V hosts running on Windows Server 2012 R2 Standard with real fixes. The VDI Clients are configured with Windows 7 Enterprise and RDP8. Unfortunately, we are not able to use by the broker for connections Remote Assistance?  We received the Error Message:

  The following error occurred during the occultation session 2 on the server...

  This function is not supported on this system. (120)

  I found the link: http://documents.software.dell.com/doc78042 or

  http://documents.software.Dell.com/DOC145926

  But this article has no recommendation for Windows Server R2 Standard 2012

  Any help, I would be grateful.

  THX in advance

  Thomas

  This question is not met at the time of the request

  I created a Blog post to allow other servers to 2012r2 2012r2 of remote assistance.

  However, it is not possible to use 2012r2 to help a win7 server remotely. It is simply not supported by MS and there is nothing we can do.

  If you can create a server 2008r2 to run the Management Console, you will be able to assist distance Win7 VDIs from here.

• Problem with control of bug 0xC5: DRIVER_CORRUPTED_EXPOOL on the virtual machine (Windows Server 2012 R2) - TDI vShield Manager error on vnetflt.sys

  Hello guys, I'm having this problem:

  KB.VMware.com/selfservice/microsites/Search.do?Language=en_US & cmd = displayKC & externalId = 2081616

  The thing is that my ESXi hosts run 5.1 Patch Update 3 7 and this says KB updated to 5.1 Patch Update 2 6.

  No idea what to do?

  Thank you

  I just reinstalled the VMware tools without the vnetflt.sys driver and the problem resolved.

• Oracle Weblogic domain creation problem with Webcenter portal and the content of the products.

  Hello

  I tried to create a new domain weblogic support webcenter portal and content products. However, I got the following error on the progression of 70%:

  --------------------------------------------------------------------------------------------------------------------------

  Preparing...

  Extract the contents of field...

  Creating new domain security information...

  Failed to create in the domain!

  Location of area: C:\Oracle\Middleware\user_projects\domains\base_domain

  Reason: null

  Exception:

  Traceback (innermost last):

  "< Iostream >" file, line 86, in there?

  ImportError: no module named javaos

  --------------------------------------------------------------------------------------------------------------------------

  Server operating system: Windows Server 2012 R2

  FMW Version: 11.1.1.8

  Your help would be greatly appreciated.

  Thank you

  Cyrus

  Hello

  Did you add the name of your operating system (Windows Server 2012) in the javashell.py file?

  After you add the name of your os you must re-create the jython file - modules.jar.

  Use after command to generate the jar again

  jar - cvf jython - module.jar Lib META_INF (records created after extraction of the jar file)

  I have also been facing same problem, solved by above to get around.

  -Prashant

• Satellite P850 - 31 M - invalid key, the installation of Windows Server 2012

  Hello

  I don't know about or write about me, that it moves if necessary.
  So here's my problem.

  I just bought a laptop with the windows installation 8, but I want to install Windows Server 2012.
  I boot on my dvd, everything's fine, and then I click on install and then he told me that the key was invalid.
  But I do not enter a key.

  When I reinstall windows 8 I give no key and it did not in the property and after he told me that windows is activated.

  I don't understand the key or it will scan?
  I have how little he turns to me key?

  Thanks in advance

  Sorry, but I m confused.

  If you have purchased the license Windows Server 2012, then you have also a serial key.
  You must use this key for activation.

  Victory 8 regarding:
  I guess Win 8 was preinstalled.
  In this case, you will need to create a recovery disk before you install another system?
  You don't have any disk Win 8 because there was a possibility to create a recovery disk and the recovery disk contains a 8 win which is enabled.

• Windows Server 2012 Foundation - installation of recovery DVDs - Activation question

  Hi all

  Please could you help me with the following text:

  After the installation of Windows Server 2012 Foundation of Fujitsu Operating System Recovery DVD Fujitsu server activation does not work. Error code: 0xC004E003, Error Description: The Software Licensing Service reported that license evaluation failed.

  Thank you

  Ivo

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• installation of windows server 2012

  I recently purchased windows server 2012, however, it came with a disc only. No instructions, nothing? How can I install on my Acer Aspire easyStore H342?

  Hello

  Thanks for posting your question in the Microsoft Community!

  After going through the description of your problem, it seems that needs clarification to install Windows Server 2012. I suggest you go through the followiong links.

  Installation of Windows Server 2012.

  http://TechNet.Microsoft.com/en-us/library/jj134246

  Install and deploy Windows Server 2012.

  http://TechNet.Microsoft.com/en-us/library/hh831620

  If you need assistance, I suggest you to ask your question in Windows Server 2012 TechNet Forum.

  http://TechNet.Microsoft.com/en-us/WindowsServer/hh534429

  I hope this helps!

• PowerEdge 1850 - installation of Windows Server 2012

  Hi guys, I have a Poweredge 1850 which I brought cheap on ebay, I use it as a NAS abit to free up space on my iMac and stream movies/music to my computer or via DLNA to my TV and PS3.  I am currently running Ubuntu that I kind of like/dislike, I also like to use my server as abit of a toy game project, and I like to try things, like using a webcam as a security camera which I can access when im etc.  I also use it to connect via ftp to and run Web etc pages.

  Now you know how I like to play with my server please can you help me :(  I want to try a new OS, I don't fear wipeing and start again as I can save on an external HARD drive.  I have a copy of Windows Server 2012 with I think that 30 days free and if I like it will activate.  When I boot from the CD, I get to the bit where it asks an installation location, but I can not find disks for select, I know I probably install the drivers I've tried (whether they are good or not, I don't know) my problem is they are .exe I can't load it as im on my mac:(-je n'avais pas ce problème de localisation deles de lecteurs quand j'ai installé Ubuntu) who find them without problem.

  Is it also possible to do this via VNC, I use remote on my server as I placed it in my garage.  Its abit of an effort to bring it inside more, she is rather noisy.

  A quick, someone could go through how to configure my drives in the bios, because I don't want to use RAID, I rather just have them as two discs rather than with her backup to another.

  Would be very grateful if you could help me with my "little" project (maybe we could both remote in and talk via Skype and do it together: D)

  Kind regards

  PriestyUK

  Yes, 2012 needs pilots, and the only way to get out them of the EXE is to run the EXE to extract the content (or use another tool for extraction).

  If you don't have a Windows machine (or you are not able to do it in a box of Linux/Mac), is not a virtual Windows machine that you can extract it, AND you have access to Server 2008 (not R2), then you can install it with this long enough to get the extracted driver, as pilots PERC 4 are from 2008 (but not later).

  Because Dell can't 2012 on 8G servers, you will need to use the drivers for Server 2008 R2:
  http://www.Dell.com/support/drivers/us/en/19/DriverDetails/product/Poweredge-1850?driverId=9K3D3&osCode=WS8R2&FILEID=2731109791 (you need the 'hard drive' version)

  The RAID controller integrated to 1850 (PERC 4e/Si) does NOT support so no RAID, in order to use the disks individually, you must configure each disk in a single drive RAID 0.  An alternative would be to disable RAID entirely, that uses only the onboard SCSI controller.  The RAID cache will be more usable with RAID disabled well.

  You configure RAID in the CTRL-M (during POST) utility.  You disable RAID in BIOS (F2), in respect of the integrated devices (CTRL-M will not be accessible when disabled - you use CTRL-A to display the disks).

• Windows Server 2012 with EFI fails to start after reset of HA

  The purpose of this thread:
  1. a solution, if anyone else has this problem.
  2. If someone has a better knowledge of why this happens or how avoid feel free to explain it please.

  The scenario:

  I was a new analysis a HBA via the Web Client (something I've done many times before in the non-Web client without any problem...) and loses connectivity to the ESXi host. No response from the ESXi at all and I've noticed a GROUP... That's fine for now...

  The biggest problem is that the VM on the failed host installs via HA to my other ESXi in the cluster, each of them has started normally except my 2012 server s. Just the Automatic Startup Repair Wizard has started, and I couldn't do much from there... I tried a few things auto repair, but they could not fill...

  So, I entered the command line tools and ran from diskpart. Discs not presented at all. That's where he hit that I use PVSCSI drivers for my 2012 s server so I was trying to understand how I could inject the command line, but I tried something else first...
  I started the virtual machine on the ISO 2012 server. Tried the option repair, no OS not found to fix, so I chose a new installation and loaded drivers PVSCSI pvscsi-floppy, interrupted the installation and tried the repair option again. He said something like "Continue to start Windows Server 2012" and viola! The VM rebooted successfully and started successfully in the operating system.

  All 3 2012 Server virtual machines on failure that esxi is affected. No Server 2008 or linux where affected machines but they do not use the pilot PVSCSI.

  
  Anyone has a solution alter or maybe an explanation why this happened? This will happen if HA into action on my server 2012 s?

  Is it possible to test or confirm without killing an ESXi host?

  I am running vSphere 5.5 and I don't think that I had this problem with 5.0 or 5.1, but I'm not 100% sure that cause I don't remember no matter which GROUP or another that are running older versions of the failure.

  Hardware version is 9, EFI boot.

  Thank you!

  Finally, I solved this... Looks like a mistake to the EFI initialization after reset of a HA. I know EFI is not supported by FT but I'm only using HA I can't find anywhere that it says that it should not work.

  This is how I fixed the corrupt WS2012 boots:

  1 boot WS2012 ISO, select new installation, load drivers PVSCSI, interrupt installation and choose repair. (Only needed if PVSCI-pilot helps you bootdisk)
  2. choose Help and then command Promt
  3. Run diskpart
  flight type list
  Locate the number of the partition-small FAT32 EFI, in my case nr 3
  Salt type flight 3

  type assign

  flight type list

  Choose the letter assigned, in my case E:
  Type exit

  4 cd /d e:\efi\microsoft\boot

  5 ren BCD BCD.bak

  6 bcdboot c:\windows/l en-us/s E: /f ALL

  7 bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  Don't know if all these are necessary... However, it works. Note that the scanos and rebuildbcd show 0 found BONES.

  8 exit the command prompt and click on "Continue starting the server 2012" after that recharge should work properly again.

• Suspension of consistent application on Windows Server 2012 invited with U2 ESXi 5.0

  We lack ESXi 5.0 U2 (build 1254542) and we are going to have problems making consistent application paused on our virtual machines that are running Windows Server 2012.

  We use Acronis vmProtect, and he throws warnings on our VMS in 2012 on the SQL Writer is not not available.  I contacted the Acronis support and they said that it is a problem with the suspension of consistent application.

  When I take a snapshot of a VM 2012 (verification of the ability to perform a capture instant consistent application) capture instant full fine without errors or warnings.  But when I look at the vss_manifests zip file that is created, there is only a single file (backup.xml) with a single line.

  When I take a snapshot of the suspended application on our virtual machines that are running server 2008, the vss_manifests zip file also contains files for each of the VSS writers.

  I checked the disc. EnableUUID is set to true (the virtual machines created on ESXi 5.0 U2 with Virtual Machine Version 8).  I have even manually it specified.

  I checked that the virtual machines use only SCSI disks (there is only 1 disc) and is not a GPT disk or dynamic within the guest OS.  It is a thin disc put into service, if that matters.

  I checked VMWare Tools is installed on the client, and I tried to reinstall it.

  Is there something else I should look for consistent suspension with applications working on Windows Server 2012?

  What do I need to run ESXi 5.1 for this to work?  (Or could I just install the latest version of VMWare Tools manually?)

  If I have to run ESXi 5.1, 5.0 to 5.1 ESXi licenses are worth?  (We have the 5 Essentials license Server vCenter).

  If I have to run ESXi 5.1, must I also improve our vCenter Server installation of 5 to 5.1?

  Thank you

  We've finally updated to 5.5 and everything seems to work fine now.

• Installation of vmware tools windows server 2012

  I have to do something special to install vmware tools on a machine virtual windows server 2012, or just run d:\setup?

  Thank you.

  As long as it is the Fusion of 5 or above, just run the installation program.

  If Fusion 4, you may experience problems with the video driver that I don't see if Fusion 4 was never updated to officially support Windows 8 guests. In this case, however, if the only goal is to get something running, be sure to disable the video driver from the VMware Tools installation.

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Upgrade Windows Server 2012 Std to 2012 Std R2 with the same license

  I have an activation key for windows server 2012 Std, can I upgrade windows server 2012-2012 Std R2 with this key? Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.