Installation of windows 8 pro USB 3.0 drive on iconia w700 possible flash?

Similar Questions

• installation of windows xp pro without a hard drive found

  try to reinstall windows on my wifes after a problem computer, so I formatted the disc which is a WD cavier SE WD800.

  WD say that there are no drivers sata for this?

  I think that's what I have to go?... SATA drivers for win xp to see the HARD drive.

  Thanks much for any help.

  John.

  Depends on how old the motherboard has. What you can check is the following:

  (1) check that your drive is connected to a standard SATA port and not a port SATA RAID (Raid ports usually have a different color and come as a pair of sockets/connectors on the motherboard.)

  2) enter the BIOS and set the SATA "IDE" mode

  (3) If your motherboard doesn't support SATA-I mode, then you may need to change the jumper on the WD800 to SATA I have fashion.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• New installation on windows 7 pro 64-bit sees not connected wired Officejet 6500 E710a-f

  Hello!

  New installation of Windows 7 Pro 64 bit on a gigahertz 3.40 AMD Phenom II X 4 965 with 8 GB of ram. Printer drivers worked on the same bench while he was running as Windows 7 Pro 32-bit.
  After only install FF, AVG, and Acrobat (almost a clean install), downloaded the software HP Officejet full feature and pilot 2012-10-22, Version: 116,98, 28.8 M - OJ6500_E710n - z_1315.exe and tried to install the Officejet 6500 E710a f.

  The printer has a manually set static IP and can be ping from the host. Clean Windows Firewall is disabled and stopped.

  The web interface using the IP address of the printer comes with all the features works on FF.
  Network status shows connected with IP address, hostname and Mac.

  However, when installing the network audit is no ethernet connection. Even manually enter his public static IP address or hostname does not solve the problem.

  Try the USB, the same question option. I see in Device Manager under other devices HPOfficejet 6500 and 6500 HPOfficejet - Fax with a blue questionmark.
  (In the same "other devices" there are 2 Officejet 6500 with a yellow exclamation point - probably from failed network installation).

  In the printers and devices window, the 6500 is displayed with the correct thumbnail, but with a yellow exclamation point icon. Law and by selecting the convenience store, Windows comes up with the message that no driver is installed and offers a solution.  The correction ends with the error that no drivers not found for the FAX. Re-apply the patch never finds the driver.

  Anyone who has met something similar (and a solution)?

  Thanks for any help!

  Jack

  After trying to do an install clean-install of 100% and once again, the driver software could not find the printer name or IP address.
  Back at each stage, I noticed that I was not using the correct driver! For some reason I D/L the pilot E710n which is for HP Officejet 6500 a Plus e-All-in-One.
  Whatever the difference, when installing the E710n for the model does not detect the printer, or via USB or Ethernet.
  After you download the right driver for the E710a - f HP Officejet 6500 a e-All-in-One Printer (OJ6500_E710a - f_1315.exe) installation perfectly finished in a few minutes and everything goes well...

  You would think, base or USB connectivity network should not be dependent on the specific differences sub-model. I was expecting that a bad driver interrogate the device after finding its IP address and display an error message with useful text.

• Desktop browsers does not not after the installation of Windows 8 Pro

  Since the installation of Windows 8 Pro, I can't use any browser in the office, nothing to do. All problems seem to get fixed by going to the browser on the desktop, but IE, Chrome and Firefox do not work on my desktop. Also just found out that I can't connect to the ITunes Store, either. Please help me with this. Thank you.

  Hello

  If it works well before?

  Try to set Internet Explorer as your web browser as default, it worked for me.

  See the steps provided by Jessen: http://answers.microsoft.com/en-us/ie/forum/ie10_cp-windows_cp/how-do-i-make-ie-10-defualt-web-browser/4f5a15f3-7eb5-4212-a6db-089f2426df17

  All the best...

• Old dualboot options still available after the installation of Windows 8 Pro on a desktop Pc which had XP and Windows 8 prewiev version on that front.

  Old dualboot options still available after the installation of Windows 8 Pro on desktop in XP, but now triple options. Windows 8 Pro (volume 1), Windows 8, old windows installation.  Anyone who knows how to get rid of the last two options?  The good thing is now that I don't have to put a password everytime I turn on the computer.

  Press the Windows key + X and then click System

  

  Click on advanced system settings

  Click the Advanced tab

  Under Startup and recovery, click settings

  

  Select Windows 8 and uncheck the box "time to display list of operating systems.

• I have Windows 7 Pro English pre-loaded factory! is it possible to change the language of the Interface in Arabic?

  I have Windows 7 Pro English pre-loaded factory! is it possible to change the language of the Interface in Arabic?

  Win 7 Pro Support switches language? or only win 7 Unltimate and Enterp?

  Original title: dass

  Business or ultimate edition

  http://Windows.Microsoft.com/en-GB/Windows/language-packs#lptabs=Win7

• 0x0000007E during installation of Windows 7 Pro

  Hello. I just installed a new motherboard (ASUS M4A89GTD Pro/USB3) and I have some problems to install Windows 7 to start. I start from the CD and after that the files load the Windows 7 boot screen appears and then goes to the blue screen of death to give me a STOP: 0x0000007E error. I tried stripping on all material additional expansion slots (Radeon 5770 x 2) and left only the keyboard and mouse. The error always appears, and I am at a loss. Please advise on how to proceed with my installation. Thank you very much!

  Mark

  You may need to put the controller driver from the motherboard, the hard drive on a usb flash drive, and then load them so that the drive to install Windows 7 to see your hard drive.  I had to do with a computer laptop Toshiba Portege M400 tablet that has a raid controller, which does not have the disc to install Windows 7 drivers for.  Get the driver from the ASUS website, expand it on a USB flash drive, put the Flash DRIVE into a usb port, start your Windows 7 installation disc, install the driver if necessary...

• Not found CD/DVD unit after installation of Windows 8 PRO

  I can't play a dvd after you have installed Windows 8 PRO. The wrong researcher: material cannot start because the config damaged or incomplete information in the registry (code 19).

  When you are looking for a new driver, told me that I have the last. I read on the Microsoft technical support who has a similar problem occurred on the Vista installation, but the solution should not be applied on this installation.

  What else is to deal with this problem?

  Hello

  Did you Win8 upgrade or clean install?

  Check it please http://eu.computers.toshiba-europe.com/innovation/generic/windows8-message and instructions.

• Bus driver SM with yellow mark after installation of Windows XP Pro

  Finally, I have windows xp pro loaded. But in Manager device theres a yellow mark sm bus driver. Searching the forum I seem to have fould to her in the video driver ATI pack. But when the driver is loaded it messes up windows so it does not start.

  Can anyone help?

  Paul

  Hello

  I am reading other threads and it seems that you have a laptop Satellite Pro A60.
  What can I say you installed the OS manually and in my opinion a simple driver is missing
  Have you tried to install the infrared driver of the European driver Toshiba page?
  It may be a key

  In any case, before you start the manual installation of the OS, you must read the Installation Instructions. You will find all drivers that must be installed and the proper installation order.

  Please check this document and follow the guidelines

• No sound, no new installation of Windows XP Pro SP3

  We had to install Windows XP Pro on a laptop but the sound does not work.  Device Manager displays the details as an "Audio on High Defeinition Bus device" Audio and show details such as HDAUDIO\FUNC_01 & VEN_1106 & DEV_1708 & SUBSYS_15580663 & REV_1007\5 & 2F010DBF & 0 & 0001

  There is a yellow question mark against this material on other devices, Device Manager. The properties indicates it is present, but no drivers were installed with Code 28. Using the results of option to reinstall the drivers in thwe Wizard saying that it cannot install this hardware because the required software is not found by the wizrad!

  I tried some drivers, such as those from Realtek, but with no result.

  Any suggestion please?

  (Note that it worked on Vista professional but which had to be replaced due to graphics card conflicts, solved with XP Pro).

  No version of Windows already had a set of drivers included. There is too much material 'out there' for Microsoft to consider being completely comprehensive installation. In any case what are Microsoft doing about / hardware technology which is backdated by the version of Windows that uses any given individual?

  Out of curiosity, what is the manufacturer of your PC? I've never heard of which did not provide for drivers.

  If they do not respond to emails, http://www.pcidatabase.com/ can be useful. Your ID Fri and dev are respectively of 1106 to 1708. Use the drivers found in this way at your own risk. Set a restore point before installation. Don't let you be guided to use any driver 'detective '. If you use Windows Update.

  As I pointed out, you may be missing other drivers too such as (but not limited to) chipset and LAN.

  Tricky

• Windows xp pro usb install

  
  

  original installation of windows 7 starter.
  I would like to replace windows 7 starter with
  Windows xp professional.

  I have 2 usb devices that I am able to select to
  boot from the BIOS. one is a LG portable multi
  by car, the other is a usb flash drive.
  I tried to make the installation of each of
  These devices (prepared usb key using
  WinFlash).

  Two attempts have had the same results.
  Start the computer to the usb device, shows that
  It installs the installation files, and then goes to
  "starting windows" and gives me a bluescreen with
  Stop: 0x0000007b (google it and found it to be a)
  peripheral inaccesable to start)

  The BIOS Info:

  System BIOS version: v3.09 (DDR2)
  VGA BIOS version: Intel v2001
  clear all passwords
  boot order is usb
  hard drive

  Cannot find any mention of start secure in the bios.

  tried to change the type of drive = ide to AHCI won't boot anything anywhere

  Any help would be appreciated

  Thank you

• during the installation of windows xp pro, I get a message that says can'nt read the disc

  When the windows xp pro installation I get a message that says can'nt read the disk and ask a complete worm that I have a full verion

  Hello

  Using disk management to reassign the partition and try to install the operating system.

  Rgds,
  J Chambers

• PCI.sys blue screen during the installation/repair Windows XP Pro

  My computer has been invaded by the virus, and they have corrupted my system files until I can start only in safe mode. I tried to repair Windows XP Pro using the installation CD, and I am getting a blue screen with the PCI. SYS on it. It has been set to boot from the CD, and it was.

  Also, I have already installed Recovery Console, and the computer is a Windows XP SP2 with the plant material. I did a CHKDSK on it and looks very good.

  Oops. just a simple driver issue. I started in the last known good config and had no error. I uninstalled the driver and got the suitable driver for my laptop. Sorry for the inconvenience!

• browsers stopped working after the installation of windows 8 pro

  I installed the windows 8 pro yesterday and everythign seems to work with the system and applications well, my internet connection is good. For some reason all my browsers like internet explore and google chrome do not work. the integrated internet explore on the start menu of windows 8 is at work, what CA I do to solve this problem?

  I have an Hp Office p2-1123w

  I found a solution myself, everything you have to do is to update your installation of windows 8, just go to settings and click on update your computer, without modifying your files and follow the instructions on the screen.

• Installation of Windows 7 Pro on Windows Vista

  Hello

  -J' backed up all my data on an external drive.

  -A conducted an audit of compatibality and I'm ok to install 7

  -Ran Microsoft Malware Scan

  -Updated, ran and disabled virus protection

  -Checked to see if my computer was 32 or 64-bit (32)

  -Ran the Windows 7 Pro Installation disk

  * Chose to connect to the internet during installation for updates to update more

  * A selected custom installation (I like all of the deleted computer)

  He asks me, "Where do you want to install Windows?" and gives me three options.

  Disk 0 Partition 1 / 70.0 MB / 62.0 MB free / OEM revised

  Disk 0 Partition 2 (d) / 19.5/19.4 Go free / primary

  0 3 disk partition (c) / 576 GB / Gree 396.7 / system

  Which to choose and why there are three partitions?

  The first two partitions were likely put there by the OEM computer for purposes of recovery for VISTA.

  If you no longer want a return to VISTA, you can delete all partitions during the installation of Windows 7.

  See below.

  Install Windows 7

  Steps 7 and 8

  Otherwise, install on Partition 3, the C: