Installation of Windows on a Mac - Help

Similar Questions

• Driver.cab cannot copy on the re-installation of windows xp... help

  well hoping that someone can help because I'm lost...

  two weeks that ag has a virus that struck my notebook bad, then last night, that I decided re - install windows xp using the cd, everything has started big until the computer failed to copy some files to the cd. I chose to ignore copy them these files to upload later installation had compeleted. This is where I am stuck I can't get them anywhere. I tried to copy from the CD-ROM I386 folder, but it fails to make the copy.

  Anyway the files I need are;

  Driver.cab

  Hypertrm.chm

  Iashlpr.dll

  iasnap.dll

  Iassam.dll

  kodak_dc. ICM

  If someone could point me in the right direction to a place I can download these files or can happen to other ideas that will solve my problem, it would be much appreciated. also if someone could tell where each file should be copied in which would also be a great help

  Thanks for your comments, but now solved the problem I had. I copied the file from another computer driver.cab, updated some drivers for my network card, then I was able to get the rest of the files I needed through automatic updates, end only took an hour and so far no problem

• How can I download the installer of windows on my mac?

  I want to download the trial of windows first, but my windows machine is not internet capable, if I can download exe and .7z since my mac files?

  Yes, it is possible to do it this way.

  If you need direct links to the download, you can navigate to page: http://prodesigntools.com/adobe-cs6-direct-download-links.html and download.

  But make sure you follow the steps mentioned on the page before you start the download.

• Acer Aspire Nitro v15 reports no battery present unit, after the installation of Windows 7. Pls help

  Hi, recently I have bouht a VN7 - 591 G-75HT, without BONES, and then installed Win7. I didn't use Win8. Laptop works when pluged, but he pointed out that there is no battery and battery does not charge. It does not start even when not on AC. Is there a way to fix this? Thank you

  SNIDS: [under the direction of life private]

  I do not have the right Power Manager he would start on the farm. Since the closure, try to unplug the power cord, locate the tiny hole at the bottom and gently pushing a paper clip into the hole up to hou feel it click. This will reset the battery. If that doesn't fix it, you may have a defective battery.

• How can I add a previously installed windows on my mac pro installation

  Hi guys, everything becomes to collect my newly bought mac pro 3.1 (used). I'm moving PC, but how do I add my existing installation of windows on my mac? The mac pro is 3.1 and has 2 x 500 GB disks in a raid 1 TB configuration. It's just a matter of plugging my windows disk (I'm guessing No.) or is it a bit more complex than that? Any help or advice will be appreciated and hope to give back as much help as I get that I'm learning. Thank you

  You can install Windows on a Mac computer using Boot Camp Assistant or by using a Parallels, Fusion, or VirtualBox virtual machine natively. Refer to the instructions of Boot Camp located here: http://www.apple.com/support/bootcamp/. OT If using a virtual machine see the instructions located on the Parallels, Fusion or VirtualBox sites.

  In both cases you can not use a PC already existing installation of Windows. You need to reinstall Windows on your Mac.

• Mac lost during the installation of windows

  When installing windows on a MAC, I deleted my partition mac completely and I am now left with windows 7 to my mac book air. Y at - it an option to install mac, I don't mind losing the windows partition

  Hello smarthala,

  Thank you for using communities of Apple Support.

  I see that you deleted by mistake your Mac partition during the installation of Windows. The partition itself deleted or was it the Mac OS that has been erased, leaving an empty partition?

  If the latter, you can reinstall OS X from OS X Recovery. See this article for how that should be done: On OS X Recovery
  Otherwise, you can use Internet recovery (Command-Option-R, as opposed to the command-R) to repartition the entire hard drive and install the version of Mac OS X provided on your Mac. Who is finished, you can upgrade to El Capitan via the App Store > bought.

  Best regards.

• Need help with the installation of Windows XP Home on my Satellite Pro A300-1DZ

  Hi all.

  I have a Satellite Pro A300-1DZ system unit, model no PSAG1E-OOFOO4EN (think they are 'o' and not '0', circle with slash through it) with WXP Pro.

  I recently contracted a virus inside and as he removed, however it is not good so I want to re - install Windows XP Home edition. I backed up the computer, I have a Windows XP Home SP2 Pro edition disk and I have my product key.
  I put the CD/DVD in BIOS to run 1 drive and tells me that I can boot from the CD, I press a button and it loads the CD, select the option where to install windows.

  BUT! I can t go further than what windows does not detect the HD said he s not now, or whatever.

  My question is this: Please can someone me step by step instructions on how to reinstall XP and a link to all the drivers I need to make it work?

  PLEEASE!

  It's simple on my PC, also, please keep in mind, I am best suited for working on cars, I'm not stupid, but my calloused hands search for computers a little more difficult than Motors please not in many computer technical terms.
  I myself am the slow education in the dark arts of computers. LOL :)

  PS. the laptop has a Vista Basic sticker on it, but it is certainly the XP pro operating system. :)

  Hi jeff

  Here's your solution:
  1. go to bios with F2 when you see the toshiba start screen.
  2. Select the arrow to the left using the "Advanced".
  3 press down until you get to "SATA Controller Mode".
  4 change, using F7/F8, Chang [AHCI] setting [compatibility].
  5. make sure the CD/DVD drive is the first to start and F10 save and exit. computer restart when you are prompted to "press any key" press a button and hey presto as before windows will start the installation, but this time you won't get windows you said:

  Set up did not find Ant hard disks installed on your computer.

  Make sure any drive HARD are powered on and properly connected to your computer and any hard disk related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.

  implementation cannot continue press f3 to goto hell... uh I mean leaving the installation

  And you can continue on your installation of Windows XP Home edition.

  Hope I helped many other jeff's in the same boat. XD

• Installation of Windows 7 help - HP Pavilion 2800

  Hello

  I'm having quite the challenge with installing Windows 7.  I have a HP Pavilion dv2800 (2842se) (Vista 64 - Bit), which required a new hard drive.  Today, I installed a new SATA 320 GB 5 400 rpm device and booted up using the Windows 7 installation CD (bought a copy of the sales at retail).

  I can't past the second screen, which indicates that Setup cannot locate the correct drivers (I guess that each of them, but the first error specifically referenced the CD/DVD device driver).

  I did the install in a folder of drivers that I ripped out the original machine, which had Vista.  Who has not identified.

  I've rooted through forums and looked for HP, but it doesn't look like device drivers are displayed for this machine for a new installation of Windows 7 (not satisfied with this answer).

  Anyone know what I can do to get the drivers for this computer (where?) and allow Windows 7 to proceed with the installation?

  Any help will be appreciated.

  Thank you

  My alma mater-called... they want their degree of technology back.

  I made a mistake and downloaded the x 86 version for a 64-bit machine.  I'm now enjoying the "copy windows...... expanding windows files install has screen.

  I'm sure I'll run into driver problems later, but this problem is solved.  Thanks for asking the obvious questions, which led me to remember the basics.

  Thank you

• Help the clean installation of Windows 7 Pro and using the GPO to run automatic updates and restart all night

  I am trying to solve a problem that will probably require a new installation of Windows 7 Professional 64-bit. The grace period ends in 3 days, and the next 30 days are final exams at the College. I have 2 licenses (and product key) of Windows 7 Pro, but my drive HARD goes wrong and I don't want to use MAK activation. I will be eventually to replace the disk, but is now bad timing.

  If a reinstall is needed, I was going to ask if anyone knows how to set the strategy of perhaps a GPO where Windows is updated automatically in the background and after installing updates, 45 or 60 minutes, then restart. The goal would be to have a computer fully patched when I wake up in the morning.

  This is my plan:

  Install Windows 7 Pro SP1 64 bit > Windows automatically updated and plug the Ethernet cable > define a GPO where the computer waiting for 45 to 60 minutes after installation of updates (so the msi may end in the background, and I do not interrupt the installation) > the PC will restart > more update swill be downloaded and installed > wait due to the policy of GPO before reboot > Reboot > do it until it's over. > wake up with a PC fully patched 7-9 hours later.

  Is this a workable plan?, and if so, how do I define policies such as delay restarting, etc. to achieve?

  The reset did not work. It would be a simple solution. I have a valid license, but I don't want to replace the HARD drive until after final exams are over, so I'll reinstall and activate. I try to achieve in the next 24 hours, so it doesn't keep me from my school work.  I must also support and will then replace my files.

  Feel free to advanced used terminology. I have some experience.

  Any help is greatly appreciated!

  Another question: should I install a security suite before all updates being installed more than 12 hours, or wait until later? What is the level of risk?

  Anyone used Ninite to automate the installation of other programs? Is how safe it?

  Thank you!

  You will have to go on Support of Windows 7 forums on the following link to help solve your problem: http://social.technet.microsoft.com/Forums/en/category/w7itpro/

• Windows instead of Mac! What can I do? Help!

  Hi, I just bought an elements first 13 but too fast! I chose Windows instead of Mac! What can I do? Help!

  You can check: a product for another language or version of trading platform

• With the help of a keyboard of Windows on a Mac to work remotely

  Hi, I use desktop connection remote on my Macbook Pro to access my computer for working remotely. My work computer is a PC running Microsoft Office. I would like to be able to connect a windows on my Mac keyboard and use Microsoft Excel exactly how I would be at work. I am trained on a keyboard windows with excel and find it difficult to constantly go back. Can someone please?

  A Windows keyboard will not work on a Mac.

• Help to perform a new installation of Windows Vista 64-bit.

  Original title: Clean Install.

  I am wanting to perform a clean installation of Windows Vista Ultimate 32-bit.  I would like to install Windows Vista Ultimate 64-bit.  I was told, during the custom Setup, that I could choose which bit to install.

  Hello

  With Vista, you do not boot from an external drive to install it.

  It is an option in Windows 7.

  And they told you to contact Microsoft for support.

  Microsoft does not provide support for OEM installations.

  In Vista, 32 bit and 64 bit come on different DVDs.

  See you soon.

• Help! Just downloaded first for Windows instead of Mac OS...

  Hello! You just purchased Premiere Elements and Photoshop Elements, but ordered download for Windows instead of Mac... I have not started the download again (just registered products)... How can I switch to the Mac platform without having to contact the telephone customer service (it's the weekend)?

  Thank you, G.

  guillaumeM

  It's not Adobe, but rather mainly to a user forum. You need to contact Adobe online orders to set the agenda.

  Please use the following link

  Contact the customer service

  or

  Return, cancel or change an Adobe order

  Both can take you to the same place, but I would start with the first (that Adobe online orders of cat is listed as active at this time with this route).

  Please let us know what your schedule allows.

  Thank you.

  RTA

• SQL Server 2005 Express Installation on Windows XP VMware Fusion (Mac)

  Hello

  I tried to install SQL Server 2005 Express edition on Windows XP VMWare, the installation of the system-error, restart and get a bluescreen with a system error and it does this in a loop without end I tried twice (both with the installations of Windows XP) and both times he wandered outside with a blue system error screen.

  I have no idea why it error. I chose the default configuration for the installation of vmware windows xp, 512 MB RAM and 40 GB of space. And my network setup is NAT.

  If anyone has an idea about this, please give me some ideas.

  Thank you

  I have just downloaded Microsoft SQL Server 2005 Express Edition and had no problem installing Windows XP and I really don't see this as a matter of VMware Fusion although even if it was I'd go about troubleshooting it as if it were a physical Machine and would start by re-download SQL Server 2005 Express after compensation to any browser cache to make sure that the download was good.  Of course, on a clean at least build, to also have Windows Installer 3.1 and .NET Framework 2 installed first.

  This is the name and the size with a MD5 checksum unofficial of the Microsoft SQL Server 2005 Express Edition I downloaded from the Download Details: Microsoft SQL Server 2005 Express Edition.

  SQLEXPR. EXE 53.5 MB (56,105,688 bytes), MD5: 6797955b505d3871cabb630db28623a9

  Direct download link for Microsoft SQL Server 2005 Express Edition

• How to disable 10 Windows on a Mac?

  Hi all

  I made a stupid installation of 10 Windows on a Mac that is too old (early 2009).

  I have another Mac on which it is possible to run Windows 10 (end of 2013).

  Can someone help me solve the transmission?

  Windows forums, you see some information, how to disable the first installation by entry some codes in the Terminal.

  Hope that someone must know to help in this issue.

  With thanks and best wishes,

  Laurent

  See Boot Camp: Remove Windows from your Mac.

  TT2