installation of Windows services has stopped working when you try to install the software

Similar Questions

• "automatic update service has stopped working" when you try to install the software

  I'm trying to install Canon Imagebrowser provided with my camera.  Close program ends the installation process but cannot complete.  I then get an error box saying Microsoft serivce Auto Update has stopped working and the installation does not complete. Have tried several times and have the same problem.  This has happened with the software Imagebrowser - other software on the CD installed fine.

  OK... I thought about it.  Go to the link below and follow the instructions to manually install Imagebrowser.  It worked for me!

  http://USA.Canon.com/Cusa/consumer/standard_display/utility_browser
  Good luck...

• I get an error, "host process for windows services has stopped working" when I try to run a program.

  host process for windows services has stopped working a problem caused the program to stop working correctly windows closes

  Original title: host process for windows services has stopped working

  See if you have rootkits. Run tddskiller, if it finds rootkits, select cure, wait for it to finish and then restart your computer

• Get an error 'internet service has stopped working"when you are connected to the internet

  * Original title: my computer keeps do not stay online, I always get a message saying that the internet service has stopped working and it will constantly, I could make dionostics but in vain

  My computer is not online, I get a message that says service is stopped, reconnection. I have DSL service and you run programs to detect a problem, but nothing is

  Hello

  1. which browser is installed on the computer?

  2. What is the full error message?

  3 is this a wired or wireless?

  4. that all the troubleshooting steps have done?

  5 have have there been recent changes made on the computer before the show?

  I suggest you follow the methods provided below and update us with the results.

  Note: If you are using internet explorer, follow the methods provided.

   

  Method 1: Verify the problem by running Internet Explorer mode without modules.

  Temporarily disable all add-ons to see if the modules are the origin of the problem.

  To temporarily disable all add-ons:

  a. click the Start button.

  b. click on all programs, accessories, and click on system tools.

  c. click on Internet Explorer (No Add-ons).

  If the Internet Explorer (No Add-ons) mode works very well then an add-on may be causing the problem. You will need to re-enable each (process of elimination) in order to determine which one is causing the problem.

  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

   

   

  Method 2: Optimize Internet Explorer and check.

   

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

   

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For more information, see the article and check.

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-Internet-connection-so-slow

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if it helps!

• Windows 7 error: "Windows Explorer has stopped working" when you try to connect to network shares.

  I recently installed Windows 7 Ultimate on my laptop - clean, no upgrade. It's in the CARDS and not a copy of the beta version. When I try to connect to a network share, I get an error. "Windows Explorer has stopped working". If I go to start > run and type in \\servername\users, I'm prompted credentials. I enter domainname\administrator, then the password, as soon as I get an error message indicating that "Windows Explorer has stopped working" then by «Windows Explorer restarts...» "and then refreshes the screen. If I open computer > network > Servername, I invite myself again for credentials, but get the same message. The name of username/password combo does not seem to make a difference.

  An additional singularity, I went to control panel > "Backup of your computer", and when I was invited to a network location back up my system, I gave him the same set of location and network credential and the system have been successfully saved to the network drive.

  Press Win Logo key + R, type: fsmgmt.msc

  You see your own actions?

  If so, open the credentials manager in Control Panel and look for an entry like your network logon. Delete who can clear up.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• SE error message "Windows Explorer has stopped working" when you try to search for document files

  Original title: C:\Windows\Microsoft.NET\Framework64\v2.0.50727

  When I'm looking for my document folders all of a sudden, a window pops up saying: windows Explorer has stopped working, then it restarts my computer, I followed to DW20.exe and my friend told me to try and rename it but for some reason any he used to let me. This is a recurring problem and is extremely frustrating!

  Please help me

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Note 1 : when you perform the clean boot, then follow step 7 to reset the computer to start as usual after the boot process.

  Note 2: Make a backup of all your data on an external drive before you perform an upgrade in-place, as this could result in loss of data.

  Hope this information helps.

• SE charger of HEALTH professionals has stopped working when you try to install a game.

  I have a Loader of HEALTH professionals has stopped working while he was trying to install some treasures from the deep by Oberon Games.  I searched and found others have had the same problem with this error message.  I found help for Vista users, but there is nothing for the support for Windows 7 users.

  I am running Windows 7 Home Premium 64 bit on a B-311 HP 20 Pavilion with 4 GB of ram.  When I first had this system, I had 8 Home Premium 64-bit Windows installed on it and the game installed without any problems.

  Here are the details of the error message I get:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: Start_Here.exe
  Application version: 2.0.1.4712
  Application timestamp: 4402d 429
  Fault Module name: Start_Here.exe
  Fault Module Version: 2.0.1.4712
  Fault Module Timestamp: 4402d 429
  Exception code: c0000005
  Exception offset: 00003045
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 79ee
  More information 2: 79ee8ce1c976216026f008da08a6a3a9
  Additional information 3: c6a2
  Additional information 4: c6a28a6a42863f9b270bcf8e85f99d62

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  I tried even to run the installation with Windows XP SP2 compatible mode set up option and you still get the same error message.

  chk if the game is compatible from this link

  http://www.Microsoft.com/en-in/Windows/compatibility/error/index

  If not install it in compatibility mode and click on the link for more information.

  http://Windows.Microsoft.com/en-us/Windows/make-older-programs-run#1TC=Windows-7

  If you still have problems with the game contact he is a developer or ask their support for more info...

• The Setup program stops working when you try to uninstall the installer of qwest

  the Setup program stops working when you try to uninstall the software

  the Setup program stops working when you try to uninstall the software

  Hello

  Try uninstaling with revo uninstaller (download the trial for the link.)

  link

  Use the advanced uninstall, method, delete the associated files and reg keys.

  Good luck

  Chyavan

• SE error message "Windows Explorer has stopped working" when you click on network and sharing Center

  Original title: Windows Explorer has stopped working when I click on network and sharing and also...

  Hello technical savvy people!

  Windows Explorer stops working when I click on network and sharing, and also when I click on system.

  -Otherwise, I rarely get this little automatic.
  But when I do she translates these windows endangered; and then I can't find my connection to the local network, or my IP address,
  nor know how my system!

  Can you suggest healings?
  Thank you for your attention,
  marlem388

  Hello

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Error: Windows Explorer has stopped working

  Hope this information helps.

• Driver.exe has stopped working when you try to play Driver.San Francisco.

  I get the message DRIVER. EXE. Haven't STOPPED WORKING, when I try to play the game, Driver.San Francisco on my computer. Windows 7

  Hello

  1. what game do you play?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular game?

  4. What is the exact error message you received?

  Method 1:

  I suggest you perform the clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to see link and check.

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista

  http://support.Microsoft.com/kb/2665946

  See also:

  If the problem is related to Microsoft, I suggest you to see link and check.

  Game hangs or quits unexpectedly

  http://support.Microsoft.com/kb/303032

• 1330 error when you try to install the software main street

  Receive the following error message when you try to install the update of the software of Boulevard of Main Street Software, Inc. 2011 on a machine running Windows Vista 64 bit HP.

  File 1330.A error required cannot be installed because the file E:\Blvd\Data1.cab has an invalid digital signature. This may indicate that the file is corrupted. Error 8205 was returned by WinVerifyTrust.

  Another attempt to run this software update received the same message except the last line shows error 24592 was returned by WinVerifyTrust.

  I managed to install the software on a laptop then. I already tried to transfer all the content of DVD on my hard drive, then by running the Setup program, without success. I have also tried to run Setup in Windows XP compatibility mode, receive the same error message.

  It is about a Windows update that has caused similar problems for other users.

  KB978601 causes "signature digital invalid" error with a CAB file
  http://www.win7heads.com/Windows-Update/73744-KB978601-causes-invalid-digital-signature-error-cab-file.html

  If you have this update on your machine, you could try to uninstall via 'Programs and features' and 'View installed updates'.

  There are many other causes mentioned in these links too.

  http://www.Google.com.au/search?q=error+24592+was+returned+by+WinVerifyTrust&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = jLYyTJSoIoPJccP6mbYD

  http://www.Google.com.au/search?q=E%3A%5CBlvd%5CData1.cab+has+an+invalid+digital+signature&SourceID=IE7&RLS=com.Microsoft:-to the: IE-SearchBox & ie = & oe = & redir_esc = & ei = p7cyTP2aEc3Jcda52dYD

  What have to say about this, if you contact the software factory?

  The reason why it happens a machine and not the other could be because some of your programs or the system is missing updates, have older versions of the software, or third-party programs interfere with the installation.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

• Advpack.dll error when you try to install the software

  When you try to install new software I get the following error: "error creating process . "Reason: C:\WINDOWS\system32\advpack.dll ' any idea how to deal with this problem?  XP Pro SP3.

  It turns out that I tried to install a 64-bit version of the software in question.  This being the SonicWall VPN client software.  I thought I was running my system to 64-bit I use the Athlon 64 processor.  Install the 32-bit version worked and solved my problem.

• Error "Windows explore has stopped working" when you open the file in my documents

  Original title: opening a file in the folder my documents

  Whenever I try to open a file in my documents folder, specifically a CV that I downloaded on a construction site. I get a message that windows Explorer has stopped working?

  Hi dalintn,

  1. What is the file format of the document?

  2. are you able to open documents from other locations?

  3. did you of recent changes on the computer?

  Check if the similar problem persists when you access the document from any other location on the computer.

  Method 1

  This error message can occur if there is some system files corrupted on your computer. I suggest that you run a SFC scan, which would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2

  If the previous step fails then I would suggest that you do clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

   

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player stops working when you try to view some AVI video files.

  I recently updated my computer and this problem developed after the upgrade. I don't know if I'm missing a codec or what.

  On some, but not all AVI video files when I try to view them with Windows Media Player (version 12.07601.17514), I get the following error Message:

  "Windows Media Player has stopped working.

  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  I use Windows 7 (64-bit).

  AVI video files causing a problem Windows Media Player are viewable by FinalMediaPlayer.

  I recently updated my computer and this problem developed after the upgrade. I don't know if I'm missing a codec or what.

  On some, but not all AVI video files when I try to view them with Windows Media Player (version 12.07601.17514), I get the following error Message:

  "Windows Media Player has stopped working.

  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  I use Windows 7 (64-bit).

  AVI video files causing a problem Windows Media Player are viewable by FinalMediaPlayer.

  ======================================
  No guarantee, but it might be interesting to try to download
  and install the following freeware codec pack:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Multimedia | ADVANCED Codecs for Windows 7 and 8
  http://www.MajorGeeks.com/files/details/Win7codecs.html

  Good luck...
  :

• Installation error 112 Setup error message when you try to install the software of the camera Kodak DC200/DC210 Zoom 1995

  Original title: initialization error 112 Setup

  1995 installed Kodak DC200/DC210 Zoom camera software.

  Explanations with the error: decompress the program files not all charges.

  Note: A message previous said that some files can not be installed at this time, because the areas have been used, and records still awaiting loading would be installed when the computer was restarted. (My phrase).

  I may not be a problem, but I don't know how I would like to know whether the error 112 was relative to the previous announcement requirement of a restart or another unrelated with error 112.

  Thank you

  Destry

  PS: You know; In appearance, it could be as silly a question as it seems... But I deal with my share of 'Error' messages, so I'll take the risk that the crazy and ask anyway.

  D.

  Hi Destry,

  1 windows operating system you are using?

  If you use Windows Vista, it seems that the Kodak camera is not compatible with Windows Vista.

  For more information, please visit the following links:

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=software&s=Kodak%20DC200%2f%20DC210

  http://wwwca.kodak.com/global/en/service/digCam/dc210/ownerManual/05inSf.shtml#88364

  You can try to install the device in Windows XP compatibility mode and check.

  Check out the links for more information:

  How to troubleshoot program compatibility issues in Windows Vista

  http://support.Microsoft.com/kb/927386

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Also read the following article:

  Error 112 Setup Installation Error message"when you try to install a program

  http://support.Microsoft.com/kb/326678

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.