installation of WMP11 on windows media center 2002 problem

I tried to install Windows media player 11 ((WMP11) WMP11) on windows XP media center edition 2002 worm, pass program copy of windows validation and display the following message:

"Installation cannot continue, one or more of the following problems has occurred during installation...". Operating system not supported, download the Update Rollup 2 for windows XP m dia center 2005 edition, before to install wmp11

How you try to install WMP 11. Updates or the stand-alone package?

Download here in clean boot.

http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme

This could also help.

http://tipsfor.us/2008/09/06/install-Windows-Media-Player-11-on-XP-without-WGA-headaches/

Tags: Windows

Similar Questions

  • Windows media center xbox problem

    I'm running on windows vista 64 bit, but I have a problem when connect my xbox 360 Media Center with my pc, they detect very well, but when they come to connect it disconnects the network of xbox and my pc... Help

    Hi Jonathan Thewlis


    Do you get any error messages when you try to connect?

    I suggest you temporarily disable the firewall, and check if the reconfiguration of the configuration solves the problem. If you are able to communicate properly with disabled firewall, then you must configure the firewall properly connect.

     

    Don't forget to enable the firewall after troubleshooting gets completed that your computer will be at risk.

    You can also check the help on the issue links - below

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

    http://Windows.Microsoft.com/en-us/Windows-Vista/demo-setting-up-an-Xbox-360-as-an-Extender-for-Windows-Media-Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-a-Windows-Media-Center-Extender-device

     

    You can also look at the article below and check if the information is useful.

    http://experts.Windows.com/FRMS/windows_entertainment_and_connected_home/f/49/p/38589/453405.aspx#453405

     

    I hope this helps.

  • Windows Media Center - audio problem on recorded TV

    My PC (Vista Home Premium) is connected to a widescreen TV with a HDMI cable and antenna lead.  Since we had in 07 big sound worked to record TV Live hi-def with Media Center and play on TV.  Suddenly, probably due to the recent update of windows Media Center, the audiocassette see the TV does not work.  It must be a software bug in Media Center because I can watch internet programming on the TV and the audio works fine.  Even Media Center sounds play fine.  Also the TV recorded see fine audio playback on the PC monitor, the only problem is on the TV. Does anyone have this problem or any idea of a solution?

    Hi Jwphl,

    Try to change volume settings and see if that fixes the problem.

    1. double-click on the icon of volume control main windows in the taskbar

    2 options-> properties > look for the choice of the mixer device.

    3. Select your tuner > check all boxes

    4 ok

    If this does not work, try the system restore and then install the updates manually one by one.
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

    Audio problems in Windows Media Center
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-problems-in-Windows-Media-Center

    Bindu S - Microsoft Support

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Profiles of Netflix in windows media center, causing problems

    It seems the new Netflix profiles posed problems in the version of Windows Media Center of Netflix.

    Launch and selecting a movie/show in the app Netflix Windows Media Center works great.

    However when you play the movie, you are prompted to select a profile, after you select a profile you are presented with a screen saying:

    "Something is not right of the specifications.  Repeat this last step' with two buttons "Lets try again" and "Cancel".

    By selecting "Lets try again" brings up two error dialog boxes

    The first is a "permission denied".

    Followed by an error of "jQuery".

    Also I we a remote control for my video capture card to navigate Windows Media Center and the profile selection screen can be activated with the mouse.

    Hope that this selection screen when developed will be something that I can use the remote control for.

    I have been informed that Netflix has eliminated a patch to work around the problem. The profiles will NOT work inside the WMC, but you should receive is more an error and the original profile should work as before.

    Please confirm

    --
    Barb

    MVP Windows Entertainment and connected home

    My Blog - http://digitalmediaphile.com/

    Connected world Blog Reader Windows 8 App Barb-
    http://apps.Microsoft.com/Windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461C-b1d5-06e54a58d298

    Windows and Surface drive Windows 8 App community
    http://apps.Microsoft.com/Windows/en-us/app/Windows-and-surface-community/0abb150e-D287-47d4-837E-9fa51f485ad7

    Please mark as answer if that answers your question

  • ZP to Windows Media Center TV problem

    When I watch tv I get the following error message: .net Framework: v1.1.4322? I was watching television on this computer before, but I must have somehow deleted such.

    You need to reinstall: -.

    .NET Framework version 1.1 redistributable package

    http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26

    The .NET Framework version 1.1 SP1: -.

    http://support.Microsoft.com/kb/885055

  • DOWNLOAD internet Tv pour windows media center version 4.2.2.0

    Download the file installation internet Tv pour windows media center version 4.2.2.0 for Media Center

    Microsoft abandoned Internet TV on 9/20.
     
    | Download the installation file for windows media center Internet TV media
    Center for Version 4.2.2.0
     
     
    Barb
     
    MVP - Windows/entertainment and connected home
     
     
    Please mark as answer if that answers your question
     
     
     
     
  • Windows Media Center won't play movies or videos.

    Windows Media Center

    problems began with the shifting of the wmc vedeos vedios. now his habit get worse let me do something hardy

    What type of video file you are trying to play in WMC?

    Supported video files: -.

    http://Windows.Microsoft.com/en-us/Windows7/file-types-supported-by-Windows-Media-Center

  • Windows media center set up

    I have 8pro window with windows media center, but problems in the implementation. I'm in South Africa fom & if I put the postcode, said you that the TV guide grid is not available.

    Can you please help - can you advise what the zip code for South Africa is that I use music I have attached to the broadcasting of contac's local television station, but no one can help

    Vernon Nogabie

    Hello

    Thanks for posting your question on the Microsoft forums.

    I understand from the description of the issue, that the TV program guide lists are not available in Windows Media Center. We are sorry for the inconvenience caused to you. We will help you solve the problem.

    I would like to inform you that a zip code in South Africa can vary from one place to the other. Then I suggest you to use your favorite search engine to find the exact zip code of your area. You can try the following steps if the problem persists even after changing the zip code.

    I suggest to refer to the suggestion of Barb Bowman in the following link and check if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-pictures/Windows-Media-Center-will-not-download-progam/0830f543-bcc6-4EA3-8142-b589256c811b

    Please post back with the State of the question and we will be happy to help you further.

  • Can I install SSD hard drive in the version of Windows XP Media Center 2002.

    Original title: ssd hard drives

    I have a Sony desktop running Windows XP Media Center version 2002. I am thinging about buying an SSD hard drive. I was wondering if it will work

    Hi Mike,

    Thank you for the question to Microsoft Community. I'll give my best to help you.

    From your problem description, I understand you want to find out if the SSD is supported in the version of Windows XP Media Center 2002.

    What is the model number of the computer?

    Windows Media center supports the SSDS. However, when buying, check with the manufacturer if the hard drive is compatible with Windows Media Center operating system in 2002.

  • Windows XP Media Center 2002 - RUNDLL error message; "Error loading c:\WINDOWS/svacaciz.dll".

    I have Windows XP Media Center 2002 and implementing on the road, I get a RUNDLL error message; 'Error loading c:\WINDOWS/svacaciz.dll - the specified module was not e' Please HELP

    It is easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem simply remove the startup message.
    I would recommend also you start to search in the register, unless you have a backup because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom, but may not actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
    Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira
    !, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can use Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry
    .  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

    Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • Currupted Burn installation in Windows Media Player. Error a critical process of Windows Media Center has failed.

    Original title: Currupted Burn installation in Windows Media Player for Vista Home laptop

    Currupted Burn installation in Windows Media Player for Vista Home laptop.  My registration cripting of Window Media Player and streaming facilities have been corrupt, but have been corrected, but I can't burn CD/DVDs.  The appearance of the message tells me "a critical Windows Media Center process has not, can someone please help me with this problem.

    Thank you for your help, the problem has been resolved.  Much apprecited.

  • Installation window Media Center with Avermedia A850 DMB-TH/DVB-T

    Hi all

    I am located in Australia and I have a USB TV tuner which can be used for DVB - T or DMB - TH digital system. I tested it on the player of AverMedia TV tuner, which worked well and I can't all channels using an antenna from the wall outlet. However, it doesn't seem to work when I went to the Media Center window with the same exact configuration (taking wall antenna).

    I tried to use it on Windows Vista and 7, which gave me very different results.

    --------------------------

    Vista: When I click on "Setup TV signal" it recognizes the signal as "Antenna", but he was not able to scan any guide or service.

    --------------------------

    7: Interestingly, it recognizes the USB TV Tuner, but to halfway through the installer it says 'You are about to leave the media center window to start the installation process for Tuner AVerMedia digital (DMB - TH)' and the rest of the facility would be in Chinese, where he asks me which City Chinese I am etc. and cause recognized as a bad country and DMB - TH no channels are available.

    --------------------------

    Could I please get a setting for help to the top of the window Media Center?

    Initially, I thought it was a problem with the driver, but it seems not to be because she works for the Avermedia program.

    Thanks for your help!

    Hello

    Thank you for you answer.

    I have already contacted Avermedia and they got back to me with a solution. However, they notified the problem with the interface in Chinese was the software design of the library window.

    Also, I think that DMB - TH is just how Windows Media Center recognized as, because it is a hybrid TV tuner so when I click on the driver he recognizes as DMB-TH/DVB-T so its fine.

    In any case, he now works correctly. It's a hybrid tuner, they asked me to install a program that allows me to switch between DVB - T and DMB - TH. So far it works well :)

    Thanks for your help.

  • Windows Media Center - TV live - installation via a TNT set reading and decoder

    I have problems to display live TV via Windows Media Center (version 6.0.6001.18254).  My apartment block still has an analogue ariel so I reinstalled the TV through a decoder DTT channels.  Media Center has implemented a TV Guide including only BBC 1 and 2, 1 of ITV, Channel 4 and Channel 5.  TV Guide is visible in access, but live TV does not work. Can anyone help?

    Hi Kim Dean,.

    (1) it worked very well?

    (2) remember to make changes?

    (3) you get an error message?

    Method 1: You can follow the steps mentioned in the link below

    Solve problems with watching TV on your computer

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

    Method 2: Also, see the steps in the link below

    Troubleshoot Guide downloading problems in Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-guide-downloading-problems-in-Windows-Media-Center

    You might want to know

    Set up a TV signal in Windows Media Center

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-TV-signal-in-Windows-Media-Center

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************

  • Cannot complete the installation of windows media center. IR receiver undetected.

    Hello, I have a card Hauppauge WinTV HVR 1950 USB and you want to use with windows media center to watch and record tv. My setup is that the card is connected to the digital receiver via composite cables. It has a remote control and an its own ir blaster, but apparently that is not good enough for media center. Is there a way to bypass the verification of ir receiver so I can watch and record tv in media center? I have windows 7 Home premium 64-bit. Thank you.

    Savan, without receiving cable and IR blaster (not to mention the guide of)
    the provider) Media Center will not be able to change the channel on the set top
    box to record TV. And he will need the guide its supplier to plan
    records.
     
     
     
    The game, December 23, 2010 09:41:51 + 0000, Savan H wrote:
     
    > Go back to Windows Media Center put in place since then and try the procedure below
     

    Barb Bowman

    http://www.digitalmediaphile.com

  • Windows Media Center crashes under Remote Desktop connection after the installation of KB2592687

    When you view another computer (Win7 Pro for Win7 Pro) via the remote desktop connection, this (KB2592687) update causes Windows Media Center not start or leave immediately, in both cases briefly showing a popup that reads:

    Windows Media Center has stopped working

    Both computers have installed KB259687.  WMC works by connecting directly to each machine.  If KB259687 is uninstalled on the machine connected remotely via the remote desktop connection, you can run once again, WMC in the distance window.  Note the video is not available, but you are able to verify existing records, change the calendar, see the rack TV, etc. (everything as before).  Records on demand on the PC are working correctly, I had a crash the system (blue screen) apparently because of this.

    Note that there is no problem watching a WMC when using desktop remote connection to a Pro Win8 machine when connected to a machine, Win7 Pro.  WMC is installed on the machine Win8 Pro and is adjustable from inside the Desktop Login window on the Win7 Pro machine remotely.

    I had the same problem, but uninstalling the update didn't fix it for me.   I have studied and found that permissions for key reg key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Terminal Server\WinStations\Rdp-Tcp included not all permissions for the users group, just like the other subkeys.  Maybe the update of above RDP modified these permissions?  In any case, when I added for this key for users read permissions, shell new WMC would begin in an RDP session.  I also found this race the ehshell 'as administrator' would work under RDP, but this was not necessary in the past.

Maybe you are looking for

  • HP mini 110 computer: System fatal error of Hp mini 110 CNU94145DN interrupted please help. Electric lock

    My HP Mini has stopped system fatal error code and I do not know the password please help

  • Xbox, I get the error message that my credit card is on as many accounts

    Original title: Xbox live gold case I get the error message that my credit card is on as many accounts as he may be, but I have no other account that uses it on my xbox, my subscription to xbox live was canceled for an unknown reason as well! I need

  • Question about squid proxy server...

    In our College lab, we have over 50 computers and they are all members of a domain, the domain controller uses a squid proxy server to filter Web sites like facebook, etc. I just removed a computer in this domain and in doing so, I could access faceb

  • tcpip source, event id 4226

    Hi, I am running xp pro, ie8, svc pk 3, 32-bit. I received only intermittently warnings. EventID and the upgrade report warned all say it's for xp with svc pk 2. When I check on netstat - no there there no SYN_sent in the status column, and whenever

  • screen resolution adapter

    I tried to fix the size of the font on my moms comp when I went into settings display, advanced and oops, clicked on default settings. now, there is no resolution of the screen at all and it says input not supported.  How can I get inthere back and r