Installation problems Thrones and Patriots

Hey everybody. I have installation problems with elevation of the thrones of nations with the Patriots. I installed rise of nations but the installation successfully Thrones and Patriots he wins in a file called CTW_New_World_Map_01_info_text.xml.18 and then says check to see if I have available disk space, or if the file is in use. It's a brand new model with no other games on it.

Hi Riseofjohn,
 
1. have you checked the disk installation for scratches or damage?
2. don't you try to install the game in the other computer?
3. What is the operating system that is currently installed on your computer?
 
First of all I suggest to perform a disk cleanup and check whether the problem is resolved.
 
The disk cleanup tool helps you free up space on your hard disk to improve your computer's performance. The tool identifies files that you can safely remove, and then allows you to choose if you want to remove some or all of the files identified.

To use disk cleanup in Windows 7 follow these steps below.
 
a. Click Start, click programs, accessories principally made, click System Tools and then click on disk cleanup. If several readers are available, you may be asked to specify which drive you want to clean.
b. when disk cleanup has calculated how much space you can free of charge, in the dialog cleaning disc, scroll through the content of the files to delete list.
 

Disk Cleanup dialog box

c. clear the check boxes for files that you do not want to delete, and then click OK.

For more options, such as cleaning of system restore and files copy of Shadow, under Description, click on clean up the system files, and then click the other Options tab.
d. When you are prompted to confirm that you want to remove the files specified, click Yes.
 
After a few minutes, the process is completed, and close the Disk Cleanup dialog box, leaving your computer more efficient and clean better.
 
I also suggest you to run chkdsk.
Follow these steps:
 
a. click on start
b. Type "cmd" in the start search box
c. right-click on cmd.exe list programs and then select the run as Administrator option. If you are prompted for an administrator password or for confirmation, type your password, or click on continue
d. in the command prompt window, type the following command and press enter Chkdsk/r X:
 Note: in this command, x is a placeholder that represents the drive letter of the volume you want to check.
a. press y when you are prompted to check the drive the next time the system restarts.
b. close all applications and restart the computer.
 
Note: upon reboot, Windows checks the drive for errors, and then Windows starts

After the computer restarts, repeat steps 1 through 4 for the other volume and then check if the disk cleanup works.
 
If the steps provided above does not resolve the problem then I suggest to install the game using the cleanboot and check for the issue.
Put your system to the clean boot state helps determine if third-party applications or startup items
the origin of the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and re-
install the program.
See KB Microsoft article below for more information on how to resolve a problem by doing a
clean boot in Windows Vista or Windows 7:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

http://support.Microsoft.com/kb/929135  
Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above KB
article.
I suggest also allows you to check the compatibility of the game with the Windows 7 operating system.
 
To do this, you can visit this link below.

Thank you, and in what concerns:
I. Suuresh Kumar - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Can I play Rise of Nations/Rise of Nations Thrones and Patriots on windows 7 Home premium (64 bit)?

    Original title: can I play rise of nations / mounted the thrones of nations and the Patriots on windows 7 Edition home premium (64 bit) Please tell me quicklyyyyyyyyy please

    an enternainer...

    I have Rise of Nations / Thrones and Patriots and the game plays absolutely perfectly on my Windows7 Home Premium 64-bit system. Given that some people have problems, and others like me have no problem to run the game, I suggest that you go to the homepage of the game and try the demo before you buy the full game.

    http://www.Microsoft.com/games/riseofnations/

    http://www.Microsoft.com/games/thronesandpatriots/

  • And anyone who has used the creative cloud cleaner to help with installation problems?, and anyone who has used the creative cloud cleaner to help with installation problems?

    And anyone who has used the creative cloud cleaner to help with installation problems?  I should try?

    Hi Alison,.

    You do not specify the issue that you are facing, but you can restore Photoshop CC 2014.Please use the link below to find out how to install an older version of any Application Adobe CC.

    How to find and install a previous Version of Adobe Apps in CC 2015 | Adobe Customer Care Team

    Link to adobe vacuum as you said use the Adobe Creative Cloud cleaning tool to solve installation problems

    Cloud troubleshooting creative risks troubleshoot Adobe Creative Cloud download and installation issues

    Let us know if that helps you solve/Rolling back Photoshop.

    ~ Assani

  • Rise of Nations Thrones and Patriots - updated "Error", unable to find the Patch

    As the title says, I have installed T & P RoN, and I can't patch for the latest version, which would allow me to play in multiplayer mode. Whenever I click on the button "Check for Updates", it says "Error", then "can't find the Patch. How can I fix?

    Thank you!

    Hello

    Step 1: Check if updates are waiting to install:

    Install Windows updates in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

    Step 2: Try to install the patch in safe mode with networking:

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Note: Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed

    Step 3: See the article on how to solve the problems of the game performance:

    The problems of the game performance

    http://Windows.Microsoft.com/en-us/Windows7/fixing-game-performance-problems

    Visit this link below to install patches:

    Rise of Nations Update 4

    http://www.Microsoft.com/games/riseofnations/downloads.aspx#patch

    It will be useful.

  • Oracle Fusion Middleware 11g R2 installation problem reports and forms

    Hi all

    I am installing Oracle Fusion Middleware 11 g R2 forms and States (install version 11.1.2.2.0). It gives me following error by specifying various 'installation locations"(step 5):

    INST-07248: rental house Middleware specified is not a valid location (for the location of the Middleware Oracle home: C:\Oracle\Middleware\Oracle_Home)

    INST-07248: rental house Weblogic specified is not a valid location (for the location of the Weblogic Server: C:\Oracle\Middleware\Oracle_Home\wlserver)

    I installed WebLogic server worm 12.1.2.0.0 in these places. No idea how to do this setup forms and reports program recognize Weblogic version 12.x OR should I install ver Weblogic 10.3 only to work? (The value in the Weblogic Server location field to step "Install location", by default Weblogic 10.3 worm).

    Thanks in advance for your answers.

    Kind regards.

    Girish

    WebLogic 12 c is not certified with forms & reports 11.1.2.2.

    You need to install the earlier version 10.3 (10.3.6).

    Control of certification matrix:

    http://www.Oracle.com/technetwork/es/middleware/docs/Oracle-Forms-111220certmatrix-2087910.xls?ssSourceSiteId=otnen

    Concerning

  • driver installation problem 9171 with LV 8.5.1 and NIDAQ9.3

    Hello
    I just bought a NI9171 with a NI9477 DO Board chassis after checking the compatibility (driver, version LV). Everything seems to be ok, but I can't seem to get the right driver installed in NIDAQ 9.3. I tried with NIDAQ 9.4. Here, the driver has been installed correctly and I have done some tests in MAX, but my DAQmx LabVIEW library has been completely eliminated during the installation of 9.4... Re-intsllation of NIDAQ9.3 brought down the DAQmx library, but the driver no longer works. A thought is to copy the library addition and reinstall 9.4... but when it worked, it is not the right way to solve the problem. Could someone tell me if there is a problem with the Readme of 9.3 or suggest a solution to this problem? Unfortunately I have no shared services provider more and can not get direct support by OR ;-(
    Here you can find the Readme file:
    http://download.NI.com/support/softlib//multifunction_daq/nidaqmx/9.3.0/Readme.html#OS

    Thank you for any suspicion!
    Olli

    Hi Olli,

    Sorry for the inconvenience, but DAQmx 9.3 does not support 9171. There is mistake in our documentation. First, it was submitted to 9.4. However I have a solution for you. It is to install DAQmx components 9.4/9.5's to kernel with support for LabVIEW 9.3 DAQmx:

    (1) uninstall all versions of DAQmx

    (2) install DAQmx full 9.3 and restart

    (3) run the installer DAQmx 9.4/9.5

    a. Select custom, then click Next

    b. "Application Development Support", select "do not install this feature.

    c. click on through the next few menus until you reach "Start Installation". Make sure that Application Development Support is NOT under the upgrade section

    d. continue installation as usual and reboot.

    (5) the DAQmx palette should be in LabVIEW 8.5.1

    Please let me know if you have any question. Again, I apologize for the error.

  • Displays the error message when download itunes and other updates, not microsoft... says mode without failure or installer problem

    Error code is displayed. indicates the mode without failure or installation problem, contact shop etc. where purchased.

    Hi PeterLloyd,

    (1) what is the complete error message you receive?

    (2) what version of Windows you are using on the computer?

    (3) updates are you referring?

    Method 1: Try to install the program as an administrator do a right click on the program installation files and select run as administrator, click on continue if you are prompted to confirm.

    Method 2:  Select the boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

  • I have problems with the installer of Windows and Windows Update, and the solutions that I found for the two each rely on the other broken system to fix the first.

    I use a laptop HP Pavilion dv4-1220us with Windows Vista Home Premium Service Pack 1, a 64-bit operating system, and I have problems with Windows Update and Windows Installer. When I try to install programs, I get the following, or substantially similar message without the error code:

    "Error 1719. The Windows Installer Service could not be accessed. This can occur if Windows Installer is not installed properly. Contact your support team. »

    So I tried to download Windows Installer 4.5 and install it. When I try to start the installation, it always hangs on the first step, "Initializing Installation."

    After searching for a solution to this problem, I found that Windows Update may have a solution. So I downloaded the 64 bit version and got a file named 'file Windows6. 0-KB942288-v2 - x 64. I tried to run this file. He opened a box that said, in order "Prepare for Installation", "Full Preparation", and finally "Searching for Updates ', before you open a second box, which reads" click OK to install the following Windows software update: fix for Windows (KB942288). I clicked on OK in this box, which opened another box, which says at the top "updates are installed" and in a smaller section, "initializing for Installation................... »

    However, no matter how long it works, it never gets past "Setup initialization."... »

    So I tried to run Windows Update in Control Panel. He ran for a while, before giving a message saying "to check the updates, you must first install an update for Windows Update." I clicked on the button that says "install now". He has flashed, a moment, "download and installation of updates' before you go to the"check for Updates"and then he brought back the exact same upward ' to check updates, you must first install an update for Windows Update" message as before. I clicked install now once again, only to go into the exact same loop. After about four times in a loop, I gave up on it.

    So I tried to install Windows Installer 3.1v2, which took a while before saying "not enough memory is available to process this command." and the abandonment of the installation.

    So, I tried to download a program from 'Mr. Fix - it' of Microsoft. It downloaded fine and then failed on installation, because of the same Setup error I received initially.

    Finally, I tried to restart my computer and each solution is represented. Then I clean my computer and each solution is represented.

    In conclusion, the mistakes that I have in Windows Update and Windows Installer cordoned off each other, as the mistakes of each program are based on the other program to be repaired. I'm at my wit's end here. My computer works fine without one, except that I can't install new programs. I can access the internet fine, access files fine, all my scans have developed own... I don't really know what is happening. Can someone help me with this?

    Try the sfc scan:
    http://support.Microsoft.com/kb/936212

    If not, repair of Vista:
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  • Applications and updates Windows installation problems

    Original title: using windows vista Installer problems and having

    nothing will be installed on a disk and installs very few downloads, windows update tried to install the same 14 updates and they do not know how this can be corrected

    Hi DaroldMILLER,

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         What applications/programs you install?

    ·         You install updates?

    ·         You are able to install other updates successfully?

    Follow these methods.

    Problem installing programs and applications:

    Method 1: Follow the steps in the article.

    How to solve problems when you install or uninstall programs on a Windows computer

    Troubleshoot installing or uninstalling programs

     

    Problem installing Windows updates:

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

  • Want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system is restored.

    My laptop is preinstalled with Windows 7 Home Basic.  At the free launch Windows 10 I downloaded the same and after 2 months, the hard drive crashed.  The repair shop trying to fix formatting, but could not revive.  This is why I bought a new hard drive and repair charge shot Windows 7 Ultimate edition.

    Now, I want to download 10 W but not able to do that, during installation, a problem arises and the previous operating system has been restored.  When I posted the question about how to solve this problem, I was told to try the download by way of USB/ISO file.

    Now my question is that

    one) can I reload Windows 7 Home basic as I have the product key?

    (b) I can then download Windows 10 according to the normal procedure?

    I'm not tech savvy, afraid to download files in USB and then load into the laptop, so this question.

    Concerning

    S Subramanian

    Original title: Windows 7 Home basic

    You can directly download Windows 10. Windows 7 complete edition currently installed is not genuine.

    When you upgraded from a previous version of Windows, what happened is that (your PC) hardware will get a digital right, a unique signature of the computer which is stored on the Microsoft Activation servers. The real Windows 7 or Windows 8 license you were using previously will be exchanged with a key to the diagnosis.

    Whenever you need to reinstall Windows 10 on this machine, go just to reinstall Windows 10. It automatically reactivates.

    Therefore, there is no need to know or get a product key, if you must reinstall Windows 10, you can use your Windows 7 or Windows 8 product key or use the reset function in Windows 10.

    Step 1: How to download official Windows 10 ISO files

    Step 2: how: perform a clean installation of Windows 10

  • CS6 on Win10 installation problem - says another installer running and should be stopped

    I downloaded files for CS6 Design and Web Premium (it was well before the purchase of cloud) replacement on computer where Windows 10.  I clicked on the Setup icon, and he told me another installer is running and must be closed.  Can't find it.  Rebooted computer and click on Setup.  He has passed the point of wondering what elements of the Suite I want to install and start the installation, but leaves with the error DW069: an other MSI Installation is underway. and the message above on another installation program runs and must be closed.

    What should I do?

    Thanks for any help.

    Press Ctrl-Alt-Del and select Task Manager to see what is actually being run

    Also...

    Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

    -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

    - so if you have an older program, update you to Windows 10 at YOUR risk of problems

    -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

    An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

    -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

    - or run as Administrator http://forums.adobe.com/thread/969395 to assign FULL permissions can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

  • Problems with extension/plugin installation (CC Desktop and win 10)

    I have a few plug-ins / extensions and new how to install/update these via the web page of "My Add-ons" is very clumsy and troublesome.

    The main problem I have is that I have two PCs on Windows 10 and they both connected to the same series of three monitors. I switch between them using a menu on the screen and the KVM. The problem with the notification that appears on the screen asking to allow elevated privileges. Problem is that the notification remains on the screen for a few seconds and invariably I missed it poster of switching. This can also occur if you have a couple of machines in a studio that are spaced quite far as you cannot the second fast enough!

    This results in a failure to install the add-on (or update). I have not found a way to bring up the notification again. The only way I have found is to remove the plug/extension and re - install a couple of times to catch the notification on the correct PC. In a full PC running CC studio, it would be a real nightmare

    So, anyone know of a way to show the notification again?

    I know that Adobe are aware of this problem and the general add-on install issues but I don't know if they are actively working on a fix/improvement.

    I am part of a beta version of the trial of a plug-in and have seen a number of cases of people failing to have the plugin installed due to this and related issues. Automatic installation of extensions and plug-ins is a good idea, but let down by a slightly awkward application.

    Thank you

    Paul.

    Hello Paul

    The timer notification is not defined by Adobe add-ons, but instead, it is defined by Windows. We understand that the pop-up is visible for a short period and it can be difficult to catch. You can change the settings on your computer, but we can't officially inform it. When you miss the pop-up, you need to click on 'remove', wait a few seconds, then click again on 'install' from the page my modules in order to trigger the popup again. We do not have an alternative workaround for this problem.

    We apologize for any inconvenience caused.

    Kind regards

    Krystal

  • Problem with the installation of Photoshop and Lightroom updates

    Hello.

    I have a MacBook Pro with new hard drive and the only software that is Mac OS X Yosemite 10.10.3.

    I downloaded Creative Cloud App, login with my ID Adobe, checked the web site of CC my status as my plan is active and start the download and installation of Photoshop and Lightroom. Both programs have been installed in front of each app appeared an update button. But when I pressed the button to update, I got an error message: "cannot happen on the Adobe servers / please check your firewall settings and try again in a few minutes."

    Screen Shot 2015-05-06 at 19.06.51 copy.jpg

    I have log creative Cloud App, reboot my laptop, connect and try again, but the update failed

    Screen Shot 2015-05-09 at 22.39.20 copy.jpg

    I do not use any firewall in the firewall preferences system is disabled, my host file is clear

    (it's here)

    ##

    # Database host

    #

    localhost # is used to configure the loopback interface

    # When the system boots.  Do not change this entry.

    ##

    255.255.255.255 broadcasthost

    : 1 localhost

    FE80::1% lo0 localhost

    1.jpg

    Then I turned off wi - wi and connect to the Internet (wired connection) cable. But I still can't install any update. But I can install any other software. When it comes to the update - the same "unable to connect to the Adobe servers.

    If I go on the Direct download site, complete all 7 steps and try to download any application, I get the error screen (and I try to any browser):

    Screen Shot 2015-05-06 at 19.19.30 copy.jpg

    So, my question is - how can I install updates?

    http://swupdl.Adobe.com/updates/OOBE/aam20/Mac/AdobePhotoshopCC2014-15.0/15.2.2/Setup.dmg

  • Toshiba G450 - Wellphone Xt installation problems

    WellPhone Xt installation problems

    Great and thank you very much!

    Maybe it could be useful for other people who are looking for such a solution.

  • HP 802. 11b / g wireless network: HP 802. 11b / g wireless network adapter driver installation problems

    After installation of Windows 10 does not work me wi - fi, I can not find a compatible driver. The search I found one, but it gives me driver installation problems

    Hello @fede95,

    Thanks for posting on the Forum of HP and welcome!

    I'd be happy to help you with wireless driver problems you encounter since the upgrade to Windows 10.

    I will need to know your product number. You can follow the steps here - http://ow.ly/XnZL300dhzo - to find.

    I'm looking forward to hear back and work towards the resolution of this problem.

    If these steps solved your problem, please click "Accept as a Solution." You can also click on the "congratulations, Thumbs Up" on the right to say "thank you!"

Maybe you are looking for

  • How to elucidate table cells

    Hello I would like to clarify the values of the cells in table updated with the following values. Is there a way to clean up the previous values (or reset the values of cells) to the table? A set all values default cell? My question is this. The "str

  • Problems copying very large folder to an external drive.

    The other day I tried to copy a far larger My Documents folder from the disk of Windows of a house system from XP to an external drive for backup.  He wouldn't let me.  I selected the folder of My Documents to copy, press Ctrl-C, then negotiated in t

  • SSL monitoring

    Hey guys,. I'm looking for an agent this SSL certificate expiration monitoring? Someone at - it something already done they can share?

  • The kernel memory dump

    What is a kernel memory dump?

  • Driver for an HP printer that is supposed to be missing

    The laptop is a Dell Inspiron, Windows 7 64 bit.  The connected HP printer is an all-in-one 4500G510n-z.  The printer has been connected, first of all by a USB cable to put in place, then wireless.  Diagnosis on the printer indicates it is connected