Installation router E2000 works not

I want to install router E2000 on a laptop with Vista and a wireless adapter Topdog Marvel... automatic installation said that he does not succeed... any ideas of what I can do to make this work?

Thank you for having responded - we thought about it - my problem is that I had to uninstall our software Manager for Microsoft Wireless would serve as manager - once we have the router worked!

Tags: Linksys Routers

Similar Questions

  • Router E1200 works not - error 3005 (and network does not connect by hand)

    I am trying to put in place a new monitor of N300 E1200 and am not having any luck. Using the Cisco Connect ends with an error in step 'Validate the connection' each time, telling me:

    Error: 3005

    An HNAP call to the device failed because the HTTP connection was broken.

    (If it is relevant, the serioal number, type of connection and IP (WAN) all happen as "unknown" in the details of the error).

    I am able to set up the router manually via the access by web browser. I can name the wifi network, set up security, and even see and authenticate to the network of my devices, however, no connection is available when it is connected. (The internet connection is good - when I move the incoming cable between the router and computer, I instantly have access - so perfect this post)

    I also tried all the basic steps of reset and restart all involved several times, but I always end with the same result - 3005 error in the application configuration, then on a manually configured wifi network that seems to be working and can authenticate devices, but does not include any internet connection.

    I am at a loss at this point - here someone has any advice? Thank you very much for your time and input.


    Then you must configure PPPoe in the router, unless your ADSL modem is already acting as a router and not the PPPoe.

  • Windows Installer doesn't work not, error "Installer could not access" in Vista




    Also, please see the post below with a similar problem and fix possible:

    I hope this helps!

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Cisco router WIFI does not work after turning off the power

    I have a CISCO router that worked very well until someone turned off the power for a few minutes.  I tried to unplug the modem, the router and the laptop and waited a bit.  Then I turned on the modem, then the router, then my laptop but it is still not in communication with the modem.  I can use the modem with a hard connection to the laptop but need the WiFi as well as others can use it.  Help, please.

    You need to contact support with your Cisco router.  It looks like it might have been reset and the installation needs again.

  • Installation of Microsoft Works 9, disc will not be read.

    Original title: installation of Micrsoft working on Windows 8

    It won't install Microsoft Works 9 on Windows 8. I tried a lot of attempt and it will not read disk.

    Hi Jeff,

    Thanks for posting your question in the Microsoft Community forums.

    Let me try and help you with the issue that you are facing.

    Compatibility Windows 8 Center, Microsoft Works 9 is compatible with Windows 8.

    1. do you get an error message when you try to read the disc?

    2. do the disc read on another computer?

    If the drive is not detected on this computer, then, kindly, follow these troubleshooting and check if it helps.

    Your CD-ROM or DVD drive is not recognized by Windows or other programs

    Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

    Let us know if it helps. If the problem persists, we will be happy to help you.

  • LR 5 is installed. Now active CC. How to fully preserve LR5 work and simple add LRCC (CC installation offers no 'update', not 'install')?

    You want to completely preserve my Installation LR5 in working condition.
    Configuration of cloud offers "Update" and "Update all" for my Installation LR5.

    Do not want to update LR5 with LR_CC, but want to install LR_CC as a second request work.

    How to tell cloud to installation?

    Best regards

    keep previous versions installed when installing applications CC 2015 | After the effects of interest area

  • Installation code doenst work, code that is written in my acount adobe will not activate my product. Is een reinstal on a new laptop computer with windows 10.

    Installation code doenst work, code that is written in my acount adobe will not activate my product. Is een reinstal on a new laptop computer with windows 10. the same code that is delivered on paper when I bought adobe

    Creative cloud does not use a serial number and creative cloud subscribers for not having any serial number associated with their programs.  Creative cloud subscribers use their adobe ID to activate their programs.

    Download and install the desktop creative cloud application (after signing with your adobe - the same as that used to pay for your creative cloud subscription ID),

    Open the office application (a shortcut will be on your desktop) > click applications, and then select the programs you want to install.

    the desktop application gives you access to the cs6, cc, cc 2014 and cc 2015 apps.  and probably more in the future.

    If you already have the cc desktop application and you need to update your adobe id, log out and then back to your client application using the adobe id to pay for your subscription in cc:

  • I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the

    I am trying to create layers with a JPEG originally published in LR6. I converted the JPEG in a TIF format for my PES 11. PSE does not recognize the file for purposes of superposition; None of the routes command works. Just to see if PES was grateful the file at all, I tried to turn the file. Fortunately, he rotates the photo and turned it back. Why the program allow me to create layers?

    You click on Expert in pse before trying to add layers?

    Or it is possible that the image is 16-bit/channel.

    In photoshop elements go to Image > Mode and click on 8-bit/channel and see if that makes a difference.

  • General issues related to my router E2000

    Hello all - I recently bought/installed my E2000. Firmware version is1.0.o4, build7 and s/w version is 1.3.1106.1.I currently have a Kindle that connects wireless to the router E2000. NETWORK card in my computer doesn't have wireless capability and is connected to the router via an Ethernet cable. The two do not work properly. I have a printer HP OJ7410, which can be connected wireless or Ethernet cable. I have the following questions:

    1 did you install via the cd include the installation of wireless security?

    2. If I connect any additional device wireless including printer and the computer with the wireless adapter should I enter a PW for these devices?

    3. the addition of these devices via the Ethernet cable will require additional p/ws?

    Thank you-wardell1.


    1. it depends on. When you have done the installation using the CD, you remember Setting uo WEP or WPA? If you have connected your kindle to the wireless signal, it asks a password (WEP or WPA)?

    2. Yes. all wireless devices attempting to connect to the router will be asked for a password. It is the idea of wireless security.

    3 nope. no need to pw only s when connecting via ethernet.

  • LaserJet 1536dnf mfp: HP laserjet 1536dnf Windows 10 Scan mfp printer works not

    After the upgrade to Windows 10 of Wndows 7, I met a problem with Scaner on MFP HP LJ 1536dnf.

    Before letting the MS to update my laptop, I removed the printer from Windows 7.  The PC upgraded to Windows 10 and then I reinstalled the Prnter software.  I did it because I already had one problem on another PC that I updated to Windows 10 does not have the printer works properly.

    When I install the full featured printing software downloaded from the website of HP, the printer works, but the search function does not work - when I click the icon for the scan and I get a message stating that 'JL M1530 MFP series HP Scan is not found'

    I'm not trying to use printing HP and doctor Scan to see if that helps.

    If anyone has any other suggestions, please post.  Thank you.

    I finally understand what I did wrong.

    When I first installed the HP software on the laptop it asks how you did the USB connected printer (1) (2) (3) wireless network.    Because I had a laptop with a wireless connection, I selected the wireless option.

    However, it was not the installer I have for this HP printer.  I have this printer HP connected wireless to my router using an Ethernet cable.  So even if the laptop was wireless, the HP printer is in fact a network connected device.

    So, I unnstalled the HP software and re-installed and then choose option 2 - connected network the HP printer and the software installed and the printer and Scanner now work perfectly on the laptop.

    I think what was confusing me was this option 3 - wireless option - actually worked and setup went through, even though I should not really have chosen this option.

    It is in any case, everything works now.  If I would have taken the right option when I chose the installation, I would have not had a single problem.

  • Linksys E2000 can not find the device!


    I have Windows 7.

    My ISP is a DSL company. I've been with this company for several years now.

    I still have in my possession a wired router that I am currently using as my E2000 does not work.

    In my computer, I have a network and a wireless network card. Both claim that the ' device working properly "in the Device Manager.

    I tried to do the work of E200 for awhile now and I'm about to return it to the store and buy something else.

    I insert the CD and I followed instructions more than once (even tried different things).

    I always get to the screen that says:

    We now set up your LinkSys E2000.

    Please wait, this may take up to 5 minutes.

    Aftetr awhile I get the message saying that it cannot find a device and that if I use a laptop that there could be a 'switch '. When this does not work I can plug in the back of my old router and it works fine.

    I bought this router 7 days ago and it still does not work. I used to work for a DSL company and I was in technical support. I'm not a beginner.

    Please help that this is the first time that I buy a product Linksys. I'm about to lose patience with this.

    Thanks in advance

    So long Linksys you're going back to the store. Never

  • Some web features working not (buttons, drop-down menus, etc.)

    I have recently reinstalled windows 7 on my machine, and since I had problems with firefox. I had the same exact configuration installation and firefox before reinstall as far as I can remember, and I've not had the problem then. I tried the current version and the beta version of firefox.

    Basically, on some Web sites, there are some things that does not work as it should. Some buttons does nothing, some drop-down menu nothing done, image resizing works not etc.. Maybe it has something to do with javascript? Although most of the javascripts appears.

    Here's an example: on this site:
    'Reset' and 'Calculate' blue buttons does not work. The effect of the passage of the mouse works, but when I click on them, absolutely nothing happens.

    Rather a general answer I'm afraid, because I don't see an obvious problem & solution:

    1. Note for any problems with the sites that it is always worth to erase cookies from this site and to cache How to clear Firefox cache &delete cookies to remove the information from Web sites is stored on your computer
    2. Try in safe mode (see questions to troubleshoot Firefox in Safe Mode) that is accessible from your Firefox Button. (but at this stage try not yet reset)
    3. If the above does not help then try the Firefox reset, but be aware, you will lose the open tabs, extensions and preferences, you may need to favorite things first if you can find them still see Firefox Refresh - reset the settings and Add-ons
  • DVD player works not-Windows 8.1


    I have a craving 700-060-ea, new machine (1 week) upgraded to Windows 8 to 8.1.

    Problem: Can't get the DVD player to operate (in all honesty, do not know if you are working in Windows 8, such as updated day 1).

    Device Manager gives me the following against the HP DVD - RAM SW820 message: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) »

    Impossible to see a driver for reinstall HP Recovery Manager - hardware Driver Installation and it will not auto find a new driver in Device Manager

    Where can I get out of here, please?


    Try the rest of the procedure to the title of the subheading resolution - method 3: manually difficulty corrupt registry entries on the link below to remove upper and lower filters and see if that helps the issue.

    Kind regards

    DP - K

  • "Driver Installation module stopped working and was closed" error nvidia

    Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)

    Since installing I can not any version of the nvidia drivers graphics card to install.

    "Driver Installation Module stopped working and was closed" is the error that happens every time.

    IM immensely frustrated by this

    Why you post twice?

    Recommended to follow only a single wire

  • Windows Update, error: "Windows Modules Installer has stopped working and was closed".

    Whenever I run windows update, and try to install an update for Vista, I get the error message"

    "Windows Modules Installer has stopped working and was closed"

    . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

    Thank you


    Hi guys

    I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

    Thank you


Maybe you are looking for