Similar Questions

• Pavilion DV6215us: Pavilion DV6215us and upgrade to SSD Samsung 850 EVO does not.

  Pavilion DV6215us is SSD Samsung 850 EVO compatible? I cloned the original Hitachi hard drive and everything was going well. I have installed the Samsung and porwered upwards. The answer is only pushed Esc to get to settings that meets never or boots.  Given that the new drive to adapt very well and everything seemed fine before installing it is there any reason this SSD shouldn't work?  Y at - it info on SSD drives will work with the laptop?  Thank you

  Yes the DV6000 by DV6499 series with AMD processor is not able to support an SSD. The storage controller uses a SATA interface, but it is 'false' SATA running on a legacy IDE bus. No ahci, which is necessary for the operation of the SSD. That's why we put Windows XP on them without any special driver tips during installation.

• ThinkPad W520 - BIOS does not see mSATA SSD Samsung 850 EVO

  I bought a Samsung 850 EVO 1 TB - my W520 mSATA SSD does not see.

  This unit is compatible with the socket inside the W520 mSATA?

  And if not I can buy a controller mSATA?

  Thank you

  Everything works now - the reader was not sitting correctly

• Dell Vostro 200 Slim Tower - for SSD Samsung 850 Evo BIOS settings

  Hi - I am looking to replace the HARD drive in my Dell Vostro 200 Slim Tower with a Samsung SSD of 850 EVO.  I am running the BIOS 1.0.16 and do not see the option AHCI, RAID or IDE only.  Should what BIOS settings I use to optimize the performance of an SSD benefits?

  Thanks in advance for the help!

  I could get my SSD working under RAID (10 Windows) with the following steps (which some may not be necessary).

  1. MiniTool Partition Wizard Bootable 9 CD to clone a copy of the existing for the Samsung SSD HDD (Samsung data migration tool did not acknowledge the Samsung SSD on Windows 10, even though Device Manager it identified as such).  It took nearly 36 hours to clone froma 160 GB 250 GB HDD to the SSD.
  2. Replace HDD with SSD and it started / worked as an IDE drive.  TRIM has been activated and works.
  3. Apply the hotfix to the register noted in the first post of this thread (it may or may not be necessary):
     1. http://forums.HEXUS.NET/motherboards/112584-how-enable-AHCI-RAID-mode-without-reinstalling-Windows-P35-ICH9-ICH9R.html
  4. Downloaded the Intel Matrix Storage Manager 7.5.0.1017 A00 (which is appropriate for the Vostro 200 Slim Tower) from the Dell Web site and run the extracted exe file on the disk.
  5. Opens the folder where the drivers have been extracted and made a right click > install iaahci.inf and iastor.inf files.
  6. Restarted the PC, went into the BIOS and changed the IDE in RAID mode.
  7. When the system is booted, I received the message "Inaccessible Boot Device", so I let the system automatically restarts, go through the automatic recovery/repair options, then follow the guests to launch the advanced Windows options recovery to start in safe mode.
  8. Once in safe mode, I opened the Device Manager, which now showed the following new features:
     1. Disc players
        1. SAMSUNG SSD 850 EVO 500G
     2. Storage controllers
        1. Intel(r) ICH8R/ICH9R SATA RAID Controller
        2. Microsoft storage controller
  9. The system is then able to start and be used normally.
  10. There are still problems with the Samsung Wizard software, but it seems that it is a matter of Samsung.

  Hope this is useful to someone.

• Samsung 850 EVO Solid State Drive works only with the MacBook Pro - Solution?

  I recently bought a Samsung 850 EVO 500 GB Solid State Drive for mid 2012 MacBook Pro father. The computer was working properly, but it was just very slow. I took the old drive and installed the SSD. I took it to an Apple store so that they could install the OS. A guy at the Genius Bar met with me and first tried to install the OS via the Ethernet cable. It is impossible to install some general error. He then tried to install it on a disc. Which also failed. He said he was not familiar with the type of error that he saw. But he said it was a mistake 'bad '. He said he saw the SSD for my SATA cable worked. He concluded that the reader must be defective. I explained how it is virtually impossible because they have a rate of close to zero. He said: "well they are produced en masse" and explained how they could install a hard drive themselves for some too expensive price. A bit annoying.

  In any case, I took the SSD back to my house and threw it in my desktop PC. It works very well. Then what should I do? Why am I not able to get the SSD to install it? From what I read, the Samsung 850 EVO should be compatible with a MacBook Pro 2012. Can I do to install it at home? Is that all I can say people at the Mac store to help them along?

  Most likely, the drive is formatted for use with Windows computers. First step would be to format correctly for Macs.

  This is Mac OS extended (journaled) with a GUID partition map.

  OS X will only be installed on a properly formatted disk.

  HTH

  Leo

• Samsung 850 EVO Trimforce

  Hi, I recently installed a samsung 850 EVO my end 2011 MacBook Pro and I have read the weather or not, it is safe to turn on third-party SSD trimforce. But I couldn't find a solid answer anywhere. I also learned that there may be a bug in data loss with the Samsung models, but I'm not sure that this is true.

  You will get different views about the FILLING. Personally, I don't use the TRIM on 3rd party SSD. I do not quite written deserve its usefulness. So, I leave the built-in SSD Garbage Collection performance of the drive. That being said, I don't know of friends who have enabled on their Samsung 850 EVO SSD of TRIM and have not experienced any problems with corruption data.

  It's yours if you want to activate the TRIM on your Samsung.

• Samsung 850 EVO and Macbook Pro 2011

  I have read of many post related to this, but I think my problem is different.

  I tried to move from a HARD (really a hybrid of seagate SSHD) drive a Samsung EVO 850 500 GB into a MacBook Pro with OSX 10.11.2 (early 2011)

  I did the cloning with the ccc, the HDD (SATA) SSD (USB) without problem.

  Linking the SSD on SATA port all was extremely slow, to the point that I had a ball of spinning for any action and even write login/pass takes a few minutes. I did some fsck boot single-user system and checked the logs, but no error at all. Tried the two enable trimforce and people with reduced mobility.

  Repair partition takes forever to start, up to the time where I'm not ever leave at the end (after more than an hour).

  As the SSD works very well (to about 30 MB/sec) USB I have that this error was the infamous SATA cable, but I am reluctant to this topic, because:

  1. - the HARD drive works fine with the same cable (to about 100 MB/s)

  2 - make a bench in SSD (BlackMagic...) he gives 500 MB/s for both read & write, it seems speed is ok.

  3.-j' have linux small partition ultimately not yet set up to start SSD. With SSD in SATA bay, booting from a USB Ubuntu, I can perfectly copy data between applications SSD (linux partition) at a very brisk pace, it seems that the SSD or cable are defective.

  Do you have advice on where the problem may be.

  I'm out of ideas

  Thank you

  AA

  I have trying further.

  First of all, connect the SSD to a PC and the cloning of W7. Cloned and start Ok and fast, but the PC has little time and SATA2 ports only, so I was unable to test mode SATA3.

  Then, test the SSD connected to SATA port in macbook with Drive Genius. Integrity tests was Ok to read and write, with speeds of around 450 MB/s in both directions. However, copy a single file from the finder or terminal takes ages, both for the small (Kb) or support files (MB)...

  According to some messages here, similar problems were caused by a bad SSD or a cable failed. According to the tests, the disc is ok (I can get about 450 MB/s) and the cable is Ok (disc is allways found, slowly, but).

  Any advice?

• Dell Latitude e5440 - Samsung 850 EVO mSATA SSD not recognized

  I bought a new 500 GB Samsung 850 EVO mSATA SSD for my Dell Latitude e5440 (running Windows 7 Pro).  The new player was not visible in 'Computer', so I downloaded, installed and ran the software Samsung magician.

  Samsung software shows that the drive is present.  And there is a button "Validate" - I clicked on - and now: ' Drive Health Status: Good ' and ' serial number: true "appears.

  However, the SSD is not visible when I double-click on computer and the Samsung software States:

  a. "AHCI Mode. Disabled (IDE or RAID).  AHCI mode is necessary for the best performance of the SSD. »

  b. SATA Interface s. o. cannot detect SATA interface details.

  c. s. o. OS OS optimization is supported only for disks using an operating system drive.

  Question 1: Activation of this AHCI mode will allow Windows to recognize the SSD?

  Question 2: How do I?

  Question 3: Activate the AHCI mode "switch off" (logout) my HDD 2.5 "?  (I want to keep Windows 7 to 2.5 "HARD disk and install Windows 10 on the SSD to have a dual boot system, until I got used to Windows 10).

  Inside of your battery compartment is a label with your license key Windows 7 OEM on it.  Photograph it.

  Download and prepare a USB key with a copy of Windows 10 TH2 Pro.

  Remove the disk 2.5 "and connect the new drive mSATA.

  Boot the system to the USB key.  10 Windows Installer should be of the presence of the DSS and will allow you to do the installation of Windows 10 - which in turn is almost certainly going to install the network driver suitable for your system without the need to add anything else.

  USE your 7 product key when prompted and you should be all set.

  Once this is done, you can reconnect the disk 2.5 "If you want to do - but remember that 10 installation is done separately from the 2.5 disk".

• connection with a 1 TB Samsung 850 EVO SSD HD problems

  I recently bought 4 Samsung 850 EVO 1 TB SSDS that are recommended by Convergent design to be used with an Odyssey 7 q + VCR. In order to get the images on the timeline of Final Cut, I put on a SATA Adapter USB 3 SSD drives (mine is powered) and use software, once the disc appears on the Finder. Problem is that none of these Samsung 850 EVO appear on the finder. I checked my SATA USB adapter by plugging another brand of SSD drive. It works perfectly.

  Could someone help me with this issue? With a price of around $450, I don't really want these SSD drives to put useless due to a problem of Apple...

  I even tried to force allow the filling with this command: 'sudo trimforce enable', not work.

• EliteBook 840 G2: EliteBook 840 G2 Compatible with Samsung 850 EVO gbs 2.5 SATA III SSD internal (MZ-75E500B/AM)

  I am issued an EliteBook 840 G2, with a HARD drive.  I want to upgrade to an SSD.  Most of my colleagues use the:

  Samsung 850 EVO 500 GB 2.5 inch SATA III internal SSD (MZ-75E500B/AM)

  http://www.Amazon.com/Samsung-2-5-inch-internal-MZ-75E500B-am/DP/B00OBRE5UE/ref=sr_1_3?ie=UTF8&QID=1...

  Is this compatible with the EliteBook 840 G2?

  Thank you!

  kengel

  Yes it is compatible

  Please read page 16

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04560057-2.PDF

• Samsung 850 EVO and TRIM?

  Dear friends,

  Yesterday, I installed a brand new SAMSUNG 850 EVO SSD (120 GB) on my MacBook Pro (mid-2012) and I want to know now I should activate TRIM and is it safe under the OS X EL CAPITAN!

  Once again his SAMSUNG 850 EVO (120 gb, basic version non pro), MacBook Pro (mid-2012) and OS X EL CAPITAN!

  Thanks for the reply.

  Hi, you can activate the trim after you have backed up your important things. I enabled it and don't have any problem and better see the SSD performance, but some of my friends in the face of a gray screen at startup upward.

  Also, I can say that you will not have problem as long as Apple allow you to do something on your Mac

• 2009 Mac Pro is plant after the boot Samsung 850 Evo 250 GB drive upgrade

  The system seems to hang mysteriously every two weeks. It restarts every time login screen. I tried to run DiskWarrior 5.0 on the system, but it doesn't seem to help.

  I've been thinking out the disc and its replacement with an OWC (mercury Accelsior E2) or a conventional hard drive. Another option could be upgraded to the latest OS X Server 5.0.3.

  2009 mac Pro

  Mac OS X Server 10.6.8 - stock (no Trim Enabler)

  8-core 2.26 GHz, 6 GB RAM, nVidia GeForce GT 120

  Highpoint RocketRAID 2314

  Interval since the last report of panic: 734359 sec

  Panic since the last report: 1

  Anonymous UUID: E2906FE3-AD37-43A4-9D1C-5D313A9E42B5

  Fri Jan 15 20:55:31 2016

  panic (the appellant 2 cpu 0xffffff7f80cc8b4d): "AppleAHCI: location (0) reused, newFIS = 0xaaef8027: 0x00000000: 0x00000000: 0x00000000, currentFIS = x 0 00358027: 0x403cb6a0: 0x00000000: 0x00000010, PxCl = 0x00000000 PxSact = 0x00000000\n"@/SourceCache/AppleAHCI/AppleAHCI-217.0.5/AppleAHCIPort.cpp:2801.

  Backtrace (2 CPU), Frame: Return address

  0xffffff8087943b00: 0xffffff8000204d15

  0xffffff8087943c00: 0xffffff7f80cc8b4d

  0xffffff8087943c90: 0xffffff800053c225

  0xffffff8087943d00: 0xffffff7f80cc71b9

  0xffffff8087943da0: 0xffffff7f80cbce8d

  0xffffff8087943dd0: 0xffffff7f80cbd29a

  0xffffff8087943e50: 0xffffff7f8117325d

  0xffffff8087943e90: 0xffffff7f811738e9

  0xffffff8087943eb0: 0xffffff7f8117348c

  0xffffff8087943ed0: 0xffffff7f811768f0

  0xffffff8087943f60: 0xffffff8000285b66

  0xffffff8087943fa0: 0xffffff80002c8527

  Extensions of kernel in trace (with dependencies):

  com.apple.iokit.IOAHCIBlockStorage (1.6.4) @0xffffff7f8116e000-> 0xffffff7f81182ff f

  dependency: com.apple.iokit.IOAHCIFamily (2.0.6) @0xffffff7f80cbb000

  dependency: com.apple.iokit.IOStorageFamily (1.6.3) @0xffffff7f80d59000

  com.apple.driver.AppleAHCIPort (2.1.7) @0xffffff7f80cc2000-> 0xffffff7f80cd8fff

  dependency: com.apple.iokit.IOAHCIFamily (2.0.6) @0xffffff7f80cbb000

  dependency: com.apple.iokit.IOPCIFamily (2.6.5) @0xffffff7f8081d000

  com.apple.iokit.IOAHCIFamily (2.0.6) @0xffffff7f80cbb000-> 0xffffff7f80cc1fff

  Corresponding to the current thread BSD process name: kernel_task

  Mac OS version:

  10K 549

  Kernel version:

  10.8.0 Darwin kernel version: kills Jun 7 16:32:41 PDT 2011; root:XNU-1504.15.3~1/RELEASE_X86_64

  Name of system model: MacPro4, 1 (Mac-F221BEC8)

  Availability of the system in nanoseconds: 130647334321206

  discharged kexts:

  com.apple.driver.AppleIntel8254XEthernet 2.1.3b1 (0xffffff7f80f07000 addr, size 0 x 118784) - last unloaded 87066847159

  kexts responsible:

  com Highpoint - tech.kext.HighPointRR 1.1.1

  com.apple.driver.AppleHWSensor 1.9.3d0 - last load 26409548610

  com Apple.nke.PPTP 1.5

  com Apple.nke.L2TP 1.5

  com Apple.filesystems.autofs 2.1.0

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 100.12.31

  com.apple.driver.AppleMikeyHIDDriver 1.2.0

  com.apple.driver.AppleUpstreamUserClient 3.5.7

  com.apple.driver.AppleMCCSControl 1.0.20

  com.apple.driver.AppleHDA 2.0.5f14

  com.apple.driver.AppleMikeyDriver 2.0.5f14

  com.apple.driver.AudioAUUC 1.57

  6.3.6 com.apple.GeForce

  com.apple.driver.AppleUSBOpticalMouse 3.7.5

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AudioIPCDriver 1.1.6

  com.apple.driver.AppleIntelNehalemProfile 11

  com.apple.driver.ACPI_SMC_PlatformPlugin 4.7.0a1

  com.apple.driver.AppleLPC 1.5.1

  com.apple.driver.AppleRAID 4.0.6

  com.apple.iokit.IOAHCIBlockStorage 1.6.4

  com.apple.driver.Oxford_Semi 2.6.1

  com.apple.iokit.SCSITaskUserClient 2.6.8

  com.apple.BootCache 31.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1

  com.apple.driver.AppleFWOHCI 4.7.3

  com.apple.driver.Intel82574L 2.1.8b1

  com.apple.driver.AppleUSBHub 4.2.4

  2.1.7 com.apple.driver.AppleAHCIPort

  com.apple.driver.AppleEFINVRAM 1.4.0

  com.apple.driver.AppleUSBEHCI 4.2.4

  com.apple.driver.AppleUSBUHCI 4.2.0

  com.apple.driver.AppleHPET 1.5

  com.apple.driver.AppleRTC 1.3.1

  com.apple.driver.AppleACPIButtons 1.3.6

  com.apple.driver.AppleSMBIOS 1.7

  com.apple.driver.AppleACPIEC 1.3.6

  com.apple.driver.AppleAPIC 1.4

  com.apple.driver.AppleIntelCPUPowerManagementClient 142.6.0

  com Apple.Security.sandbox 1

  com Apple.Security.Quarantine 0

  com 2.1.14 Apple.NKE.applicationfirewall

  com.apple.driver.AppleIntelCPUPowerManagement 142.6.0

  com Apple.nke.PPP 1.5

  com.apple.driver.AppleProfileReadCounterAction 17

  com.apple.driver.DspFuncLib 2.0.5f14

  com.apple.driver.AppleProfileTimestampAction 10

  com.apple.driver.AppleProfileThreadInfoAction 14

  com.apple.driver.AppleProfileRegisterStateAction 10

  com.apple.driver.AppleProfileKEventAction 10

  com.apple.driver.AppleProfileCallstackAction 20

  com.apple.driver.AppleSMBusController 1.0.10d0

  com Apple.NVIDIA.nv50hal 6.3.6

  6.3.6 com.apple.NVDAResman

  com.apple.iokit.IONDRVSupport 2.2.1

  com.apple.iokit.IOFireWireIP 2.0.3

  com.apple.iokit.IOSurface 74.2

  com.apple.iokit.IOBluetoothSerialManager 2.4.5f3

  com.apple.iokit.IOSerialFamily 10.0.3

  com.apple.iokit.IOAudioFamily 1.8.3fc2

  com.apple.kext.OSvKernDSPLib 1.3

  com.apple.driver.AppleHDAController 2.0.5f14

  com.apple.iokit.IOGraphicsFamily 2.2.1

  com.apple.iokit.IOHDAFamily 2.0.5f14

  com.apple.iokit.AppleProfileFamily 41

  com.apple.driver.AppleSMC 3.1.0d5

  com.apple.driver.IOPlatformPluginFamily 4.7.0a1

  com.apple.driver.AppleSMBusPCI 1.0.10d0

  com.apple.driver.AppleUSBHIDKeyboard 141,5

  com.apple.driver.AppleHIDKeyboard 141,5

  com.apple.iokit.IOUSBHIDDriver 4.2.0

  com.apple.driver.BroadcomUSBBluetoothHCIController 2.4.5f3

  com.apple.driver.AppleUSBBluetoothHCIController 2.4.5f3

  com.apple.iokit.IOBluetoothFamily 2.4.5f3

  com.apple.driver.XsanFilter 402.1

  com.apple.driver.AppleUSBMergeNub 4.2.4

  com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.8

  com.apple.iokit.IOUSBMassStorageClass 2.6.7

  com.apple.driver.AppleUSBComposite 3.9.0

  com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.1.0

  com.apple.iokit.IOFireWireSBP2 4.0.6

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.8

  com.apple.iokit.IOBDStorageFamily 1.6

  com.apple.iokit.IODVDStorageFamily 1.6

  com.apple.iokit.IOCDStorageFamily 1.6.1

  com.apple.iokit.IOFireWireFamily 4.2.6

  com.apple.iokit.IOSCSIParallelFamily 2.1.1

  com.apple.iokit.IOAHCISerialATAPI 1.2.6

  com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.8

  com.apple.iokit.IONetworkingFamily 1.10

  com.apple.iokit.IOUSBUserClient 4.2.4

  com.apple.iokit.IOAHCIFamily 2.0.6

  com.apple.iokit.IOUSBFamily 4.2.4

  com.apple.driver.AppleEFIRuntime 1.4.0

  com.apple.iokit.IOHIDFamily 1.6.6

  com.apple.iokit.IOSMBusFamily 1.1

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.security.TMSafetyNet 6

  com.apple.driver.DiskImages 289.1

  com.apple.iokit.IOStorageFamily 1.6.3

  com.apple.driver.AppleACPIPlatform 1.3.6

  com.apple.iokit.IOPCIFamily 2.6.5

  com.apple.iokit.IOACPIFamily 1.3.0

  Model: MacPro4, 1, MP41.0081.B07 of BootROM, 8-Quad - Core Intel Xeon processor, 2.26 GHz, 6 GB, MSC 1.39f5

  Graphics card: NVIDIA GeForce GT 120, GeForce GT 120, PCIe, 512 MB NVIDIA

  Memory module: global_name

  Bluetooth: Version 2.4.5f3, 2 service, 12 aircraft, 1 incoming serial ports

  Service network: Ethernet 1, Ethernet, en0

  Service network: Ethernet, Ethernet, 2 in 1

  PCI card: scsi, sppci_scsi_bus, slot-3

  PCI card: NVIDIA GeForce GT 120, sppci_displaycontroller, Slot-1

  Serial ATA Device: HL-DT-ST DVD - RW GH41N

  Serial ATA Device: Samsung 850 EVO 250 GB, GB 232,89 SSD

  Serial ATA Device: WDC 1.82 TB, WD2002FAEX-007BA0

  Serial ATA Device: ST31000528AS, GB 931,51

  Serial ATA Device: ST31000528AS, GB 931,51

  SCSI device: Equipment of SCSI target @ 0

  SCSI device: Equipment of SCSI target @ 16

  USB device: Keyboard Hub, 0x05ac (Apple Inc.), 0 x 1006, 0xfd300000 / 3

  USB device: Apple USB Optical Mouse, 0x05ac (Apple Inc.), 0 x 0307, 0xfd310000 / 5

  USB device: Apple keyboard, 0x05ac (Apple Inc.), 0x024f, 0xfd320000 / 4

  USB device: USB-SATA Bridge, 0x067b (Prolific Technology, Inc.), 0 x 2773, 0xfd100000 / 2

  USB device: CRCA102 * AF1, 0 x 0764 (Cyber Power Systems, Inc.), 0 x 0501, 0x1a200000 / 2

  USB Device: Hub BRCM2046, 0x0a5c (Broadcom Corp.), 0 x 4500, 0x5a100000 / 2

  USB device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0 x 8215, 0x5a110000 / 3

  FireWire devices: built-in_hub, up to 800 Mb/s

  FireWire device: G-DRIVE, HGST, up to 800 Mb/s

  The panic occurred because the queue of the AHCI is truncated. Thus all things SATA are immediately suspect.

  These extensions on the "scene of the crime" are used ordinary ACHI drivers for SATA drive.

  In your added kernel extensions, you have an additional driver for RocketRAID. If possible, you should remove only while debugging this problem. It was not explicitly on the "crime scene", but it may have made changes that caused the instability.

  In addition, readers could be involved in this problem, as a failed drive can spray data in the wrong section of memory, rewrite of things.

• can I use Samsung 850 EVO 500 GB m2 for 15 Alienware?

  can I use it?
   

  Samsung 850 EVO 500 GB M.2 3.5 inch SSD (MZ-N5E500BW)

  Yes! I have 2 on my lap :)

  

• I can't install windows 8.1 SSD samsung 850 Pro for my AW18 because this error:

  I bought a new SSD Samsung 850 Pro to my Alienware 18. When I try to install the windows 8.1 and selected the SSD to install the Sagna appear the error:

  "Windows has detected that the EFI system partition is formatted as NTFS. Format the EFI in FAT32 system partition, then restart the installation. »

  Start of the motherboard as: AHCI

  Hi csarquiteto,

  You will need to format the disk partitions in order to install the operating system. Just follow the detailed instructions in this video , and when you get to the screen that says where you want to install Windows?, select the old partitions and delete them (This erases all data from the partition also), then create a new to complete the installation.

  Let me know how it goes!

• I have and try to reinstall Photoshop CS5.1 on a Macbook Pro running El Capitan (OS10.11.2). I downloaded DesignStandard_CS5_LS1.dmg but when I double-click installation I get the message 'Install' is corrupted and cannot be opened. You must eject the dis

  I have and try to reinstall Photoshop CS5.1 on a Macbook Pro running El Capitan (OS10.11.2). I downloaded DesignStandard_CS5_LS1.dmg but when I double-click installation I get the message "'Install' is corrupted and cannot be opened. You must eject the disk image. "Someone knows what's going on? I tried to download with Safari and Firefox, but the same thing happens.

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303