Installation TMSPE SQL error
Hello everyone,
in fact, I try to install the TMSPE(v1.5 or v1.6) software on a new server (Version 15.1) TMS.
(2012 x 64) SQL Server is local installed and I can connect to SQL Server with management Studio.
But when I try to install the TMSPE software, after I entered the username and password for the SQL Server I got the following error messge.
"Cannot use the selected instance of SQL Server verifies that the instance name is spelled correctly and that TCP/IP (preferred) or named pipes is enabled as a protocol."
The Instance name is correct.
Does anyone know this error and how to correct?
Kind regards
I would recommend that you run the version of Java, it is indicated in the documentation, as running versions more is known to cause problems.
See here to enable named pipes and TCP/IP connections.
Tags: Cisco Support
Similar Questions
-
When the download or installation of SQL update KB970892 on the Site to update, I get error 0x737D. I have Windows XP Professional Service Pack 3. I don't know how to solve this problem. Thank you.
Hi torito63,
Error 0X737D while updating Windows means that a previous update of Microsoft SQL server does not complete the installation.
To complete the installation, follow the steps below:
1. open programs and features by clicking on the Start button, clicking Control Panel, click programs, and then clicking programs and features.
2. Select Microsoft SQL Server 2005 and then click on edit.
3. from currently installed programs, select Microsoft SQL Server 2005 and then click on edit.
4. in the selection of the components, select database engine and then click Next.
5. in the maintenance of function, select database engine and then click Next.
6. in the installation of Microsoft SQL Server 2005, click Next.
7. in the System Configuration check, click Next.
8. change or remove an Instance, click on complete the suspended installation.
9. by error and usage report settings, click Next.
10. in the ready to update, click on install.
11. in the course of a configuration, click Next.
12. click on finish.
For more information, read the messages in the thread titled I get the 737D error code when you try to install the update for SQL Server 2005 Service Pack 3 (KB970892) security. Any suggestions or should I not worry about installing this?
Check if it works for you. Post back and we do know.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think
-
Error during installation of sql server 2008
When I tried to install SQL server 2008, it is showing the following error.
TITLE: Installation of Microsoft SQL Server 2008 R2
------------------------------The following error occurred:
An error occurred during the installation of assembly ' Microsoft.VC80.MFCLOC, version = "8.0.50727.4027", publicKeyToken = "1fc8b3b9a1e18e3b", processorArchitecture = "amd64", type is "win32" '. " See Help and Support for more information. HRESULT: 0 X 80070091.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0&EvtType=0xF45F6601%25401201%25401
------------------------------
BUTTONS:Ok
------------------------------
I tried 2 or 3 times after you have uninstalled the previous version 2005 and Microsoft framework 4.5. It does not work. The same error is show when installing SQL Server Datatools-Business intelligence for visual studio. Can someone help me?
Post proposed by the facilitator for the appropriate forum placed
For SQL Server Setup issues, you should post in the dedicated forum:
MSDN forums - installation of SQL Server & Upgrade - Microsoft
-
Hello I get a SQL error everytime I click on solve a puzzle on a PTC site, that message is what I get.
Database of error: Invalid SQL: SELECT user.membership, memberships.downline_earns from user JOIN membership WE memberships.id = user .membership WHERE user .username = 'Is A' type = '1'
MySQL error: 1064 (you have an error in your SQL syntax; check the manual that corresponds to your MySQL Server version for the syntax to use near 'A' right and type = 1 "at line 1)
Missed session.
Any ideas of any software or a way to fix this would be appreciated.
It is a problem on the web server, and not on your computer. All you can do is inform the operator of the site.
-
How to skip the installation of SQL Express 2005 and using SQL Express 2008 instead?
I have SQL Express 2008 is installed and you want to use instead of SQL Express 2005.
How to configure the installation of Lookout as he ignores the installation of SQL Express 2005?
Are there other measures that must be taken so that Lookout can work properly with SQL Express 2008?
Thank you.
OK - it worked.
However, for 64-bit installations, I had to use the WOW of SQL Express 2008 versions, because, the Citadel is a 32-bit database and installation of 64-bit native versions would not allow an upgrade of the Citadel of Instance.
Thank you.
-
I can't find the link to download the program installation of SQL Server 2008 R2 or disk image
Hello
I'm trying to find the image disk or self-extracting installer of SQL Server 2008 R2 Evaluation Version. Would be nice if someone gave me the link.Hello
Your question is beyond the scope of these forums.
Please ask this question in the following forums.
Category of the SQL Server:
http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
Concerning
-
How to install Win XP on PC with intel i3 processoe running win7
HelloI'm working with a legacy system. My programs to work with Windows XP and more excellent only.Now, one day I can not PC with Windows XP we have windows 7 to house high-end system running on the desktop computer intel i3 processor.I am trying to install windows XP Professional. Installation stops with error "0x0000007b".The new PC with SATA HDD and CD ROM, I was told that windows XP Setup has no support for SATA drives, at the same time if I want to install the drivers, that it seems that for the floppy drive. Thus, it is difficult to install the drives.Also when I spoke to Dell Tech support person, he said I can't install Windows XP on the Intel i3 processor. I don't think, but I will this differ from expert.Can someone help?Hi Steve,.
You can follow this link & check if the problem persists:
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
Reference: Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XPIf the problem persists, please ask your question in the TechNet forums for assistance.
Hope the helps of information.
-
I am trying to install windows xp from the disk, but it hangs during the installation process. no error code. It just hangs. What is the cause and what is the solution?
Hello
1. at what stage of the installation, the computer crashes?
2. what operating system was installed on your computer prior to this?
If you have the similar problem as mentioned in these links, you can follow these links and check if the problem persists:
Windows XP Setup stops responding (hangs) during the "Preparing Installation" phase
Windows XP does not meet the Message "Setup starts Windows XP"
Hope the helps of information.
-
Failed to initialize the installation program. Error 110. On Windows XP.
Whenever I try to install LV6.1 or LV6.1 DSC Run-Time system, on my Windows XP machine, I always get the following error message:
Failed to initialize the installation program. Error 110.
I think it has something to do with the MSI or "Windows Installer". I tried to uninstall all of THE products of National Instruments, but it did not help. Any ideas?
Hello. Thank you. I tried, but in fact, it did not help. However, after doing a little research on our, I found a solution by following these steps:
1. reboot Windows XP in Safe Mode
2. double-click on the Setup program to start the installation process
3 cancel the installation process after it starts
4. restart windows in normal modeNow, all my applications of MSI with setup.exe work correctly! Quite strange. Just for the record: this problem was not due to a Virus protection program (as all assumed first that many people) and it kept me from running applications (MSI?) of ANY installer from a CD.
-
iTunes error Installation 7 (Windows error 1114)
Toshiba Portege R500Vista WindowsI tried yesterday installed the new iTunes 11 update, and given that drive almost full C (common with Vista users), I changed the location of the application of drive E. I have kept getting error messages whenever I opened the application, and/or connected my iPhone to the laptop!Tried to uninstall, as difficult, when finally finished, I downloaded it again on drive C by default, after the release of memory for a $30 application: (.)
At the launch, I got this error message "error Installation 7 (Windows error 1114) iTunes.I got this message when trying to uninstall "Windows Installer error opening installation log files. Verify that the specified log file location exists and is writable.Could someone please.Thank youHaniHello
Uninstall everything according to the instructions from Apple:
«Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»
http://support.Apple.com/kb/HT1923
It is also the same list of what to remove what is in the link above from Apple:
http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm
Or try this program to remove it:
http://www.revouninstaller.com/revo_uninstaller_free_download.html
Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.
"Resolution of problems with iTunes for Windows Update"
https://discussions.Apple.com/docs/doc-6562
If the advice already given does not, please contact Apple for assistance.
"Not to install iTunes or QuickTime for Windows"
http://support.Apple.com/kb/HT1926
"iTunes support-how to use iTunes.
http://www.Apple.com/support/iTunes/
"Contact iTunes Support.
http://www.Apple.com/support/iTunes/contact/
Or ask in the community Apple iTunes:
https://discussions.Apple.com/community/iTunes
See you soon.
-
Installation / product - key error 25004 (this product key can be applied to the computer, due to previous entries of product key) and 1073422306 system error.
You try to install Office or Windows product? Most of the time, this error 1073422306 is during the installation of Office.
Please look at the following thread to see if it helps.
http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-office_install/Office-2007-installation-gives-error-25004/6751fcef-F955-4a69-a8af-21444b6f5aa2Please reply back and let us know if this can help.
Thank you
-
Original title: trouble installing the drivers for my printer.
Hello
I am trying to install an EPSON L110 and eveytime I try to run the CD, it appears this error message.
Windows could not determine the language to use for the installation: CODE of ERROR: 0x80004005.
I have windows 7 32 bit OS. What I'm doing. A quick response will be very useful.
TKS
Gerard
Hi, Germain,.
This problem could occur due to corrupted files. We will try to download and install the latest printer driver on the site of the manufacturer of the printer. Check if it helps.
See the articles for more information.
Find and install printer drivers in Windows 7
Hope this information helps. Answer the post with an up-to-date issue report to help you further.
-
Windows could not create an installation folder. Error code: 0x80070005
I bought Windows 7 Ultimate and tried to install it. I hit "custom" install because I wanted to start over completely and got this error message.
Try these suggestions:
Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:
Reset permissions
============
1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
2. go to your desktop and double-click on the downloaded file.
3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
5. copy the following commands, and then paste them into the opened Notepad window:
off @echo
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
@Echo =========================
Completed @Echo.
@Echo =========================
@pause
6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.
7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
8. you will see a window of type BACK treatment.
NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."
If the same thing happens, move to the next step.
Run the upgrade by using the built-in Administrator
================================
1. click the button start-> all programs-> Accessories.
2. right click on command prompt and select "run as Administrator".
3. click on continue when user account control window appears.
4 copy the following command and press ENTER:
NET user administrator / Active: Yes
5 restart the computer and then log on the computer of this administrator account.
6. run the upgrade to windows 7.
Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade. You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.
BTW, for your references, I found similar questions:
Windows could not create a required installation folder. Error code: 0x80070005
"Cannot create file" error when you try to install Windows 7
Error 0 x 80070005 when upgrading to windows 7 from vista
See also:
CREDIT: Dale Qiao Microsoft, host and cdobbs
-
I tried to run the .NET framework. All files are downloaded, but finally the installation failed with error code: (0x80070005)
NET FRAMEWORK 4 fails installation
1) download setup of .net 4 by http://www.microsoft.com/download/en/details.aspx?id=17718
2) double-click the downloaded file to start the installation
-
Installation of SQL server on Windows 8
How to install SQL server 2008R2 on windows 8?
Please give me the step by step procedure.
There are special considerations for installation of MS SQL Server on a computer desktop/workstation. Please see the following,
Please post back with specific questions you have after trying the suggestions and requirements that lying to the breast.
Maybe you are looking for
-
Why flickr does not work with firefox
I'm trying to copy images/textures on flickr via a right click on the photo. I don't get the option to see all the dimensions of the image and/or download it or copy the image. These aren't protected files, the owner is available for free to anyone w
-
Help me choose the right laptop model Linux Fedora compatible
Hello Could you help me choose a laptop?It must be:(1) * compalible * Linux (Fedora 10/9)(2) rather * lite *.(3) Goog designed(4) powerful(5) no camera (optional)--Sorry for my bad English.
-
WLAN speed when you are connected to the internet
I use WRT54G2 V1 Wireless Router. My firmware version is 1.0.04)is. I connect to the internet via ADSL. Both computers are connected to the router, we have a connection cable, other is connected wireless. If I'm not connected to the internet, I can t
-
Allow a standard user to install software designated as updates of Adobe reader with group policy
Hello I have the users configured as standard users to prevent them from installing unapproved software. This causes problems with products such as java and adobe reader running automatic updates. We then get cranky users because they are prompted t
-
Blue screen error...
Pls help... Windows Vista makes me nutts! Blue screen error... I have the code error and all stored in a file... Whenever I turn on the PC, it gives me a blue screen... fatal mistake... not enough time to read everything... and the SYSTEM restarts ev