Installation Windows Vista SP2 fails with 737D error code
When you install Windows Vista SP2 via Windows Update program, I continually receive an 737D error Code. This error code says "Windows cannot update services and important files while the system uses them. Save any open files, and then restart the computer. »
Has anyone encountered this problem and found a solution?
Thank you
Joe Kunkel
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft Tags: Windows Cumulative update to IE9 for Windows Vista (KB292418) fails with the error code 800719E4 Automatic update of Windows is on and downloaded the updated Cumulative of IE9 for Windows Vista (KB292418). Its installation was also successful until stage 2. Upon restarting, the system did not proceed to step 3 and reported that he could not apply. The windows update tries to repeatedly apply this patch has failed, but never succeeds. When the computer reboots, the white screen will appear. I ran the autoatic troubleshooting provided by Microsoft who reported some problems with the registry and settings. Even after the system is restarted, the problem still persists. I would like to find a solution to this problem. My system is running Windows Vista Home Basic with Service Pack 2 32-bit. Moved from Vista to install, upgrade and activate Forum. Hello Try to download the update and save it to your desktop Close all windows/Applications Right-click on the file and select run as administrator If that fails, run the system update tool http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool How to reset the Windows Update components? Windows backup will fail with the error code: 2147942402 Hello I'm trying to run a backup on a Windows SBS Server 2008 using Windows Server Backup to an external 2 TB USB hard drive - I chose the backup once and personalized with "activate System Recovery." This fails with an error message "the system cannot find the file specified" after having transferred about 28.23 GB of data. The Event Viewer error code: 2147942402 I tried to run the backup to another device (a disk on a PC on a network) and it successfully without any problem which seems to me some kind of problem with the USB key. I came across these links: http://support.microsoft.com/kb/979281 and http://support.microsoft.com/kb/976972 - but the server I use does not have a USB Host Controller NVIDIA - instead, there "Intel(r) ICH9 Family USB Universal Host Controller" - so I'm hesitant to try this fix. I'll reformat the USB drive to see if that helps... Thank you very much Adrian Hi Adrien,. The question you posted would be better suited in the TechNet Forums since we have dedicated to this support; We recommend that you post your question in the TechNet Forums to get help: http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer Keep us updated on the status of the issue. Windows 7 backup fails with the error code: 0x8078012D I ran several backups on my external hard drive without problem, but I am now constantly a backup failure with an error code of 0x8078012D. How can I fix? Hi Helen, I suggest to rerun the command chkdsk (check disk) and let us know if there are bad sectors found/fixed. You can also see the following article for more information about the disk check: Check a drive for errors http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost. Also, make sure that the Volume Shadow Copy service is running. Follow the steps below: a. click Start. b. type Services in start search. (c) in the search for Services Windows shadow copy volume and the Windows backup from the list. d. right-click on the Service. e. click Properties. f. Select the Startup Type to Manual. g. click OK. h. now, repeat the same for the service Windows backup. Let us know the results. Windows Update always fails with the error code 80072f8f (Windows vista SP2). All directings on assistance to this error page in fact and not solved the problem. When you try to synchronize the clock as instructions say this fails also. Internet Explorer says invalid certifocates on microsoft support pages. It is a clean installation, everything that is on the machine is Vista SP2 03:37:1108/01/11 Windows Update KB968930 fails with the error code 800F080D For the last week I have "been trying to install this update, Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930) and the installation fails, with error code 800F080D. I am always prompted to install it. Is there a resolution? Meanwhile a few other updates when the installation was successful. Thanks in advance! Hi MariMaraki, If you receive the Windows Update 8024200d error, it may mean that an update did not finish to download or install. The System Update Readiness Tool for Windows can correct some conditions that can cause this error. You can check the link and try to use the system analysis tool and check. Windows Update error 8024200d http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-error-8024200d This also applies to Windows Vista. After you run the tool, try to install the update manually and check. See the link to download the update: Error code 464: I'm trying to update my windows but I failed with the error code associated with 464 IAM trying to update Microsoft Office Service Pack 2 · http://www.Microsoft.com/downloads/en/default.aspx Put the KB numbers in the search at the above link > download them manually. If this does not solve it: Windows Update Forum: It comes with Vista, upgrade install and activate Forum. You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below: http://social.answers.Microsoft.com/forums/en-us/vistawu/threads When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update. In this way, you will receive the best help. Mick Murphy - Microsoft partner Windows Update KB968930 fails with the error code 80070026 Windows Update fails to load after the creation of a restore point. Someone at - it guess why? The error that you receive on the Windows Update page is 0 x 80070026 (ERROR_HANDLE_EOF STRSAFE_E_END_OF_FILE) seems to be the problem with the update being corrupted during the download somehow. I will recommend allows you to perform a sweep of auditor of file system (CFS) to make sure that the Windows system files are in place and not the origin of the problem. You can try to follow the given article: http://support.Microsoft.com/default.aspx/KB/936212> NOTE: If the SFC Scan doesn't find any errors on the machine, you can download updates manually on the computer from the given link and install it: You can also try the following article to reset Windows Component Update: http://support.Microsoft.com/kb/971058> ~ or ~. I would recommend that you... Launch a collateral request for assistance free Windows Update: https://support.Microsoft.com/OAS/default.aspx?Gprid=6527> Support for Windows Update: http://support.Microsoft.com/GP/wusupport> -- XP Media Center - unable to connect to Windows Update MSE fails with the error Code: 0X80072EFE OS: Windows XP Media Center: SP3, P4 3.20 Ghz, 1 GB of memory IE V8 processor I currently have problems to connect to Windows Update. I can't connect to the site at all and is the "this page cannot be displayed" whenever I try to open it. I diagnose the network connection and he came back with no problems found. I can download & install Microsoft Security Essentials, but I get error 0x80072EFE when I try to update. Note: MSE seems to update on its own, but not via the update button. I reset IE8 by default as well as the windows firewall and the IP (Winsockfix.exe) stack I also ran several different viruses, malware and Trojan scanners and all are own return. (AVG, Norton Security scan, MSE. I tried to run the scan to Microsoft Live, but the page froze when I tried to download it. It seems that any Microsoft Security site is blocked for some reason any. A Hijack log is available if needed? I had some browser redirect issues (I suspect the Virus), but it was very random and seems to have settled down. The main problem now is to get the update in the system and the MSE. Thank you TMcC Problem solved! Trojan:DOS / main Alureon.A in the MBR on the hard drive. Start into the recovery console and run FixMBR. It has detected the MBR was not correct and re-written the record. Windows Update now working as the MSE to date. I will me BEDTIME! Thank you guys for the entries. Tom Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017 Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017 error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check). The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.) Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup. Maybe some interviews, try to run the "chkdsk/r" command at the command prompt Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk. How to run Checkdisk at startup CHKDSK http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C> Run SFC/scannow File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt. WHY: You want to ensure that the base operating system files have not been damaged or changed. How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow http://www.Vistax64.com/tutorials/66978-system-files.html> 04/01 / 1107:15: 20:00 KB948465 installation (vista sp2) failed with Error 80070020 I'm trying to install KB948465 but it keep fail with the error code 80070020. I tried all the solutions mentioned in the forum but none does not seem to work. Can anyone help? Hello I suggest that you try make a Place to upgrade and then try to install the updates. Note that it takes the same amount of time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process. To be safer side, please back up your data. Please see: How to perform an upgrade in Place on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2 KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000" Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later. If someone else sees this problem and is at - it a solution? I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system. Help? Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409 Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following: 1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507 2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more". 3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty. 4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1] 5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See... How will I know if my computer is up to date? ~~~~~~~~~~~~~~~~~~~~~~~~ ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100 original title: HELP! Having problem installing Windows Vista Sp2, I keep getting error 0x800B0100 My checksur.log said Hello These should help to resolve the problem: How to fix Windows Vista error 800b0100 update Error Code 800b0100 in Windows Update Error message when you try to use Microsoft Update or Windows Update Web sites to install Description of the system for Windows Vista, Windows Server 2008, update tool and ========================================================================== How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues You select Download - SAVE? After download go where you put it and right click Download Service Pack 2 x 86 32 bit Download Service Pack 2 x 64 64-bit Create a new ADMIN account with your password - same then REBOOT (do not logoff) and How to obtain the latest Windows Vista service pack Service Pack Center ================================================================ If necessary, you can get free reports of incidents however generally above allows to solve this problem. Windows updates - free Incident report Go here and click on-> Windows Update fails while searching, downloading or installation of updates The security updates, you can get free support Incident report I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it=""> Home Vista premium: KB978338 fails with the error code 80004005 Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7 Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows. The PC then realized... Updates not configured correctly - returning changes. Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826. Hi gbislay, I think that you are able to get on the desktop after changes have been restored. Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. Step 3: Clean boot the computer Follow step 1 in the link below, How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 Important: n ' forget not to put the computer to follow normal start-up step 7 in the link. Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates. You can see the steps outlined in the article below, which deals with a similar question Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005 Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista. Thanks and greetings Microsoft Answers Support Engineer Windows Update KB979482 always fails with 8007065E error code KB979482 fails with 8007065E error code. All other updates are successful. Running Windows Vista Edition Home Premium SP2. Here are a few excerpts from C:\windows\windowsupdate.log: ... ~ snip ~ DnldMgr * updates to download = 1 Automatic update fails... ... ~ snip ~ Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage So I tried to download KB979482 here: http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone. However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system." I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts? Finally, I ran Windows Update Fixit tool available. He fixed a couple of things (default location, another minor config) but not this problem. P.S. running BitDefender 2012 if it matters... To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works. Android Firefox beta (17) crashes when I press the menu key. Hi - I wonder if anyone can shed some light on this issue, that I had with Firefox Android? Whenever I press the "menu" button on my phone when running FF (tried with 16 and beta/17), the application crashes immediately. Briefly, I see my Android hom Impossible to upgrade... have downloaded several times, running, yet old version etc. Advisor Impossible to upgrade to latest version Equium A60: Blue screen problem I have a series of A60 Equium (PSA667E), refurbished. There is a blue apearing screen sometimes when I start sending me an error message. I tried to update my BIOS, like the Web site noted. But a message tells me that I have no need, because its alre Why UAC (and what) are required for Protected Mode work Why UAC (and what) are required for Protected Mode work? Not sure where my problem is here, but I am unable to maintain a compatible USB connection of my TouchPad at one of my home computers - 2 HP and Dell systems. The question is when he tries to detect the USB key as a drive. USB connects, disconnects
Similar Questions
http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).
http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/
http://www.instantvista.com/800B0100.html
updates: "0x800B0100.
http://support.Microsoft.com/kb/956702
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058
for Windows 7
http://support.Microsoft.com/kb/947821
http://support.Microsoft.com/kb/947366
on and RUN as administrator.
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in
log on to the new account and try the download.
http://support.Microsoft.com/kb/935791/
http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs
http://support.Microsoft.com/GP/wusupport#tab3
http://www.Microsoft.com/protect/resources/support.aspx
Ajay K
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think.
Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
Agent * bundles 1 updates:
Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
... ~ snip ~
Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
Manager of FATAL: Source of error is 106.
FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
... ~ snip ~Maybe you are looking for