installed a device and get an error message "(code 10) Impossible to start the device"
Installed Pinnacle Studio 12
Hi Bernard,.
Please provide the exact model of your device number.
12 code: This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system.
This error can occur if two devices that are installed on your computer received the same (Input\output) of i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS (Basic Input Output System), the operating system, or both). This error message can also appear if the BIOS did not allocate enough resources for the device.
Method 1: Run the fixit available in the link below and then check if it makes a difference
Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us
Reference
Explanation of error codes generated by Device Manager
http://support.Microsoft.com/kb/310123
http://TechNet.Microsoft.com/en-us/library/cc732199 (WS.10) .aspx
Tags: Windows
Similar Questions
-
I try to install CC and get this error message: "another version of office of creative cloud or an installer Adobe is running. To continue, please close these first instances. "But there are NO other open instances
Hello
Please try to close the services mentioned below from the Task Manager:
Kind regards
Sheena
-
Help, please? I changed to a new computer and get an error message that I need to download creative cloud because mine is corrupted. I'm in an infinite loop. I have download the installer and says that it cannot install because I need creative cloud and mine is corrupted. Help please! I'm paralyzed!
[Double question deleted... it is an open forum for other users (sometimes Adobe) answer, not Adobe support...] MOD]
The best option would be to contact the technical support that can remote into your machine & troubleshoot it. Contact the customer service
Concerning
Stéphane
-
Tried to install 17 Minitab, I get an error message 7530
Original title: 23940e77 Installer for windows
When I tried to install 17 Minitab, I get an error message 7530 and States that windows/installer/23940e77.msi is locked.
How to overcome this problem and install minitab 17?
Start here-online http://www.minitab.com/en-us/support/
-
Original title: could not start the Service "Windows Defender" (WINDEFEND)
When you try to install Windows Defender, I get an error message that
"Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.
How can I check which privileges I have and I need?
I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.
Help please
Hello
This error message is because you have Norton installed on the computer. See the for more information section below.
http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_USLet's try the steps and check them off below if it helps.
Step 1: You can try to uninstall Norton and then check if the problem persists.
Note: Reinstall Norton after verification.
Reference: http://support.microsoft.com/kb/307895Step 2: Change the registry value and check.
a. Click Start, type regedit.exe and press ENTER.
b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
d. enter 0, under value data, and click on the OK button.
e. close the registry editor.
f. restart the computer.Registry warning:
Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
Issue of Windows install
I just bought a HP Photosmart printer and I am trying to install the software on my computer. (OS is Windows Vista.) When I try to install my software, I get an error message that "Windows Installer could not be accessed". I ran "msconfig" and found that the Modual from Windows Installer status is stopped. How should I proceed?
Thank you, Jeanne Vecere
You could try to go to the MICROSOFT website, go to KNOWLAGE database and in the search bar, try the search for WINDOWS INSTALLER. Look for any version that is newer than the one you have. If this fails, try searching on GOOGLE. You can also try to do an update to WINDOWS VISTA.
IF YOU ARE RUNNING 64-BIT WINDOWS, MAKE SURE YOU PRINTER WORKS WITH 64-BIT.
-
I am trying to load Windows Vista on my computer and the installation, I get an error message saying I have to close the installation program and select programs and uninstall Windows PowerShell, I have no idea where I can find, I need answers, thanks in advance
original title: where to find WIndows Poweershell?Go to programs and features, select view installed updates. You should find an entry for Powershell. Select it and uninstall.
-
access denied for the creation of a directory
When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied." How can I fix this?When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied." How can I fix this?
Only when you try to install this application?
What about BullZIP PDF Printer?
(You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.)
-
I tried to run Check Disk and get an error message on the completion of the phase 2
I tried to run Check Disk and get an error message on the completion of the phase 2. If I try to run a defrag without having completed verification of the disc it comes up with error message Disk Defragmenter has detected Chkdsk is scheduled to run on the Volume: c. Please run f / dskchk. I tried to run it and nothing seems to happen. I checked that I have no other programs running and she thinks that this is the case.
* original title - I check disk / defrag problems *.
Kevin.
How old is the hard drive? It is still under warranty? The easiest way forward is to replace the drive.
-
Adobe Photoshop version: 13.0.1 (13.0.1.3 20131024.r.34, 2013/10 / 24:21:00:00) x 64
Operating system: Windows NT version: 6.2 Architettura di sistema: Famiglia CPU AMD:15, Modello:10, Stepping: 0 con MMX, SSE Intero, SSE FP, SSE2, SSE3
Fisico processore Conteggio: 6 Velocità processore: 3214 MHz
PROBLEMA: PHOTOMERGE NOT RUN! AND GET THIS ERROR MESSAGE: ERROR 22 WINDOWS NOT HAS DI A COSTRUTTORE LINEA 388 VAR W = WINDOW (RES) NEW
PLEASE, IF POSSIBLE, HELP ME. THIS PROBLEM IS ONLY WITH WINDOWS 10!
Hi biagiob,
Seems that the operating system is obsolete.
Photoshop CS6 has not been tested on Windows NT in accordance with this article: Photoshop system requirements
Suggest you to see this link to the similar problem: Photoshop: Err: "window 22 has no constructor" (Win 7/64 bit)
Kind regards
Claes
-
I have a problem after installing, I try to open applications, but I get an error message: "it is impossible to open it properly (0 x 0000022) application, click ok to close the application" anyone of you could help me? I paid the monthly rate but I can not use any application due to this error
Hello
This link may help: the application failed to start properly (0xc0000022).-Microsoft Community
Kind regards
Sheena
-
I am trying to download items 9 to a new computer and get an error message that says: "the archive file Elements 9 is missing" how to fix this?
as well, you need the 7z and the exe. put them both in the same directory and double-click on the exe file.
Available downloadable Setup files:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
- Acrobat: DC | XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7
- Photoshop Elements: 10, 11, 12, 13. 9,8,7
- Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
window using the Lightroom 3 link to see these "important Instructions".
-
Hello
I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!
Rick
original title: burning a CD problems
Hello
(1) what version of Windows Media Player do you use?
(2) what is the model of your CD burner?
(3) you have the latest drivers for the CD burner?
(4) what type of file you are trying to burn?(5) you receive error codes?(6) what version of the operating system is installed on the computer?(7) we get to a particular file?
Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
Method 3: You can also check out the link below:Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions
I hope this information helps! -
I'm getting 1602 error message whenever I try to download the update to Adobe Reader on Windows 8
< br >
< span style = "" are-size: 10pt; ' > I'm getting 1602 error message whenever I try to download the update to Adobe Reader on Windows 8, what do I do? " </span >
< span style = "" are-size: 10pt; "> < / span >"
[removed email address]
Please see the below KB Doc: http://helpx.adobe.com/acrobat/kb/error-1602-update-acrobat-reader.html
Or download the update manually from the link below and install their...
http://www.Adobe.com/support/downloads/product.jsp?platform=Windows&product=10
-
I get this error message: Code 80070663
I get this error message: Code 80070663 and it seems that there is no solution for it to what tells me the support. Please give me a process step by step in order to fix this problem please!
Step by step this path below that can help you to correct the error.
Click on the "Start" button, type "Windows Explorer" in the search box.
Click on the "Windows Explorer" in the "Programs" menu
Navigate to the path "c:/users/Allusers/Microsoft/Office/data", find "opa12.dat" file and rename it to "opa12old.dat".
When you restart Windows Office and open a file, it prompts you to turn on the Windows desktop, then activate it online.
Reinstall the updates from the Windows desktop, and then restart the computer.This solution of error on this site:
http://www.regmender.com/how-to-fix-Windows-Update-error-80070663.html
Hope it can help you. Good luck.
Maybe you are looking for
-
I'm a Firefox user for a long time. Today I just read on FIDO U2f security keys, a USB dongle that supports 2-factor authentication. It is supported by Chrome, but apparently no other browser. Looks promising, and I wonder if there is any project to
-
Why can't delete birthday calendar in iphone
I get alerts for birthdays in my diary and I uncheck, but always bring. It doesn't let me delete or change. Whenever I have delete the event, or turn the notification off the coast, it creates a second event. I can't even change it in the calendar
-
Can not connect to reinstalled Vista
I have recently reinstalled windows vista after a hard drive error. I saved the file "user" data to another computer before the reinstal. The installation went well and vista worked fine, but when I got the data user I can not connect. After you type
-
How to reference a global non-statique Timer var from a static context
Hello. I need to have a single world clock for my application, which can be canceled and re-scheduled for a different date, to within a few static methods in the application. I confess that I do not understand how the static. I'm now declaring my Tim
-
How can I replace WMP with VLC
I installed VLC (still have WMP), but could not get the downloaded titles (XPS?) to play on VLC