Installed A module Bluetooth C850-1 kN satellite?

Similar Questions

• I can't install the drivers Bluetooth on the Satellite L755-16

  Hi guys

  Today, I have formatted my laptop Toshiba Satellite L755-169.
  I installed all the drivers, but when I want to install the Bluetooth driver it say RFBUS failed.
  What I do most

  Hello

  I think that you have not installed the driver Atheros BT filter.
  Satellite L755-169 is the Atheros WLan card which supports BT also supported.
  You must install the Atheros BT filter before installing the BT stack!

• Satellite A210 - cannot install common module and driver display

  Just down to XP, downloaded drivers from toshiba and the installation was completed with an error not saying no driver found for my hardware. That's happened with the common Module and ATI Display Driver.

  I mean, I need em both!

  Help!

  Hello

  I checked the page European driver of Toshiba and it seems that XP drivers have not been to this A210 series!

  I think that you just tired to install common Modules is not supported on this laptop.
  That is one reason why you can not install it.

  With regard to the display driver.
  Try to install the drivers for the laptop models:
  PSAEJE satellite A210
  Equium A300D PSAK2E
  Equium L350D PSLE2E
  Satellite P200 PSPBLE
  Satellite L350D PSLE0E
  Satrellite L300D PSLC0E

  In my opinion, one of the pilots freed from these series should run.

• Satellite M30: cannot install common Modules after upgrade OS

  Hello world

  I changed my Win XP OS to Win XP Pro. Now I try to install common Modules, but when I try to run it, the installation is visible in Windows Task Manager, but nothing happens. You have an idea to help me?

  Thank you

  Hello

  First be sure that you install all the things in the order of good facilities. This means that the common Modules must be installed before you start the installation of any other tool of Toshiba or utility.

  Common modules can be installed like any other application following facilities Assistant.

  Unfortunately I can't tell you anything because I know what facilities order you used.

  Try to explain exactly how make you OS installation and configuration of the OS. Check also delivered the Tools & Utilities CD. I'm not sure at 100%, but perhaps here you can find the document html with the exact order of installations.

• Help for installing automated multiple bluetooth devices?

  Hello! I would like to describe our situation. I maintain computers for our local ambulance service.

  We have five ambulances. Everyone has a Logitech Bluetooth mouse and a Pentax PocketJet 3 Bluetooth printer.

  All the mice and printers are the same model.

  We have three from another manufacturer Toughbook CF-18 portable systems that use Toshiba Bluetooth stack.

  The books are transferred from an ambulance to the ambulance, ambulances are used that date.

  In addition, our policy is that portable computers use a local account with rights to base level 'user '. They cannot add their own bluetooth devices since they are not administrator or power users.

  Therefore, we must ensure that none of the three computers will work with any of 5 mice and 5 printers.

  I then have to wear each of the three books in each of the five ambulances and manually match each notebook with 5 mouse and 5 printers so that all laptops can be used in an ambulance.

  I don't like that I have to add each device, but I don't like that I have to do this manually on each of the 3 computers, and I bring the computer in a nearby physics eahc peripheral (or each device to the computer)

  This seems wrong! I have an inventory of the bluetooth address for each of our 5 mice and printers. You can a device add manually in a way, thanks to a script or command, so he don't need no need to be in physical proximity with the mouse or the keyboard and create a match?

  Ideally, I would like to do ith through a batch file, so I don't have to go through a repetitive cycle of point and click steps...

  Thank you!
  mtoal

  You cannot associate devices if they are not around, because the encryption key will be computed and stored on the host Bluetooth module and the module Bluetooth client (mouse and printer in your case).
  You can of course also configure your mouse in limited user mode if the HID drivers are pre-installed. I think that this is the case by default. Just try it. If this isn't the case, then just edit the file "As.ini" from the Bluetooth stack to pre-install the HID drivers. You can also set in 'Tosbtutl.ini' of the following before installing the battery Bluetooth.

  [AutoSave]
  HID = Enable

  It will start searching for devices (mouse, keyboards) HID when you start "Bluetooth settings".
  Assume that you have configured the same on your laptop, then on two laptop mouse.
  You must press the button of the mouse detection again and click on the mouse icon depending on BT-settings for the mouse work again on the one laptop computer. This is because most mice do not support multi-point connections. If it is supported then it is not necessary. However, it is not necessary to set up a second time.

  Bluetooth profiles are supported by your printer (SPP and HCRP)?

• Install a Module high speed Mobile me

  G ' Day,.

  I recently bought two new HP Probook 650 G1s for my business. Unfortunately, I did not realize that the modules mobile broadband were not standard, so none of them have one but they need them.

  I am able to buy and install these modules myself? If so, are there instructions on how to do it safely?

  Thank you

  Hello

  Firtly you must purchase one from the following list, otherwise it may not work:

  Wireless HP lt4111 LTE-EVDO / HSPA + Mobile Broadband
  HP lt4112 LTE / HSPA + Mobile Broadband
  Hs3110 HSPA + Broadband Mobile HP
  Atheros 802.11b/g/n (1 x 1)
  Atheros 802.11b/g/n (1 x 1) and Combo Bluetooth® 4.0
  Broadcom 802.11a/b/g/n (2 x 2) and Combo Bluetooth® 4.0
  Intel Centrino Advanced-N 6205 802.11a/b/g/n
  Intel Centrino Advanced-N 6235 802.11a/b/g/n and Bluetooth® 4.0 Combo
  WiFi Intel Dual Band Wireless-AC 802.11ac 7260 (2 x 2) and Combo Bluetooth® 4.0

  Secondary, please use the following manual to get the part # (page #73), it also shows you how to install the WWAN module:

  http://h20628.www2.HP.com/km-ext/kmcsdirect/emr_na-c04030196-1.PDF

  Kind regards.

• I have install the module "adblock more ' on my android furefox browser, but not block, he adds. What can I do?

  I have install the module "adblock more ' on my android furefox browser, but not block, he adds. What can I do? Please help me quickly.

  You should contact the https://adblockplus.org/forum/ extension

• Impossible to install the modules that are hosted outside of AMO

  I can't install any add-on that is hosted outside of AMO, in Firefox for Android 40.0.3, nor in Firefox Beta for Android 41.

  What I think should happen: I have download the file as signed (it records to SD card), then open it with Firefox and Firefox should ask me if I want to install this module.

  What is really happening: an add-on is downloaded, but when I open it is file as with Firefox - nothing happens. Firefox comes to shows me a blank screen (see the screenshot).

  My friend has this problem too.

  Looks like a regression bug (because I could install add-ons hosted out of AMO without any problems in previous versions), but I'm not entirely sure.

  So my question is: should I file a bug on Bugzilla or is it possible to install the modules hosted outside of AMO to Firefox for Android and it's just me something wrong?

  My phone has Android v2.3.5.

  UPDATE: apparently, I can not install the modules of local files, but can do some some sites. My module (I have problem with) is hosted on Github, and I can't install it for whatever reason.

  Update 2: it seems that modules can be installed from Github if she is not just a file (because Github changed Content-Disposition of at least some types of raw file of 'inline' to 'attachment'), but a binary attachment to a "news release".

  Apparently, I found a work around for this problem, so that this issue does not require a response more.

• I can't install the modules from the official site of mozilla Add-ons. I click 'Add to firefox' and nothing happens! Help!

  I can't install the modules from the official site of mozilla Add-ons. I click 'Add to firefox' and nothing happens!

  Hello

  Please check if a green icon is added to the left of the icon in the Web site address bar after clicking on Add to Firefox. If it appears, click it, check the message and select the desired action.

  Another reason could be that the extension could block Javascript or other features of the site.

• Portege Z930 cannot start with installed RAM module

  My laptop Toshiba Portege Z930-108 has stopped booting with any module of RAM installed in the support.

  If I remove RAM module, laptop computer starts and works fine, but if I install any module of RAM (4 GB 1600 original or a new 4 1600 CL9 or 1600 8 CL11) the computer cannot start.

  The screen stays black and power led flashing two green and two orange and a few seconds later, 3G indicator also on blue.

  This is the only problem I have with this computer, but it's strange.

  I updated the BIOS to the latest version and the problem is not resolved.

  I tried to reset the hardware (http://aps2.toshiba-tro.de/kb0/TSB3B03J90000R01.htm), also I tried to reset the equipment with power button 30 seconds without battery but button without success.

  Any idea on this problem of strage?

  Kind regards
  Lito.

  I guess you used bad RAM or not fully compatible modules.
  It's the only plausible explanation.

  I recommend you to order the RAM modules recommended by Toshiba that are:

  4 GB DDR3 - 1600 PA5037U-1M4G

  2 GB DDR3 - 1600 PA5037U-1M2G

• Can not install "Common Modules" on my Portege 2000

  I'm trying to install "V.6.01.00 of Toshiba common Modules" on my 2000 Portege XP Proffesional with SP2, but "ACPI namespace cannot! "GNS.exe end." error 5 times before the laptop then show me button and when I press "it is not and ACPI system" it is not possible to install the toshiba ACPI device ' error is displayed and close the application "V.6.01.00 of Toshiba of common Modules.

  I don't have Recovery CD from the laptop, so I install and standard Windows XP Pro with SP2 and install the drivers that I download from Web of Toshiba without problem, except a Standard floppy that I forget not all drivers and if I diasble usb floppy emulation does not disappear.

  I read a lot of information in the forum, but I don't know what the problem is, I know only that the functions keys and request many Toshiba are not working because I can not install "common modules".

  Thank you

  Hello

  I think that service pack 2 pre-installed XP could be the reason for this problem.
  On the Toshiba page, you will find an updated Microsoft Windows XP SP2 information! Read the entire document.
  Seems that you must update some applications if you want to run the operating system correctly!

  The EHCI controller must be updated and many others! Check it!

  Please don t forget to install display drivers! To my knowledge, it also includes the chipset driver.

• How can I install a printer bluetooth as a restricted user?

  How can I install a printer bluetooth as a restricted user?

  Windows does not allow installation in limited user mode.
  However, there is a solution that can meet the needs described here:
  http://APS2.toshiba-tro.de/KB0/HTD9602MN0000R01.htm

• I want to install Windows XP edition SP2 family in Satellite A135-S2386

  Help, please.

  I want to install Windows XP Home SP2 for my Satellite A135-S2386 edition.
  Where can I get the drivers?

  Hello

  The SATA (Intel Matrix Storage Manager) driver must be installed first, if you want to reinstall the operating system XP on this laptop.
  The Intel Matrix Storage Manager can be downloaded also from Intel or the Toshiba Web site the page we. You should know that your laptop has been designed and delivered only for the American market, so you must use the Toshiba drivers from an American Internet site.

  However, I found many comments on Intel Matrix Storage Manager here in this forum.
  Then maybe you should use the Forum search option advanced for more useful discussions on this topic.

  Buddy Bye

• Microsoft Bluetooth Enumerator attempts to install bad devices Bluetooth for CSR8510 A10

  This question applies to all the Bluetooth adapters that are based on the chipset CSR8510 A10 (for example Sitecom CN-524).

  On different machines, I'll have a different behavior as a result of the installation of the drivers for this adapter. For example, a laptop Lenovo X 240 will install fine and a Lenovo T430s will NOT install fine. The two machines are running Windows7 64 bit.

  It is not an option to install the drivers that came with the dongle, because they are based on the suite of harmony of CSR, which prevents battery Microsoft Bluetooth to use. That is what I want, and it has been shown to work.

  When you connect the adapter, Windows will try to install a generic Bluetooth Radio driver, which is fine.

  I was able to isolate the problem to the driver Microsoft Bluetooth Enumerator is also automatically installed:

  -On the machine that fails to install correctly, this driver will attempt to install 3 devices (NICs): one for the hands-free Bluetooth Audio, one for Bluetooth L2CAP Interface and one for Bluetooth Remote Control. These drivers do not start (error code 10), who should expect that these drivers are not attempted to be installed on the computer that works very well.

  -On the machine that the adapter is installed correctly, these devices do not appear. Instead, the pilots appear to Bluetooth Audio and Bluetooth Server.

  I struggle to understand why there is a difference in behavior between the two computers and I would appreciate some tips that will help me to make the failed computer try NOT to install these faulty drivers!

  Thank you!

  For anyone else who might come across this: I managed to solve the problem.

  The problem seems to be that on some computers, the 'utility WIDCOMM Bluetooth Software' is installed. This software utility may be marked specifically for the manufacturer of your computer, for example, in my case, it was called "Thinkvantage Bluetooth Software".

  Disabling the adapter embedded Bluetooth does not remove completely all network adapter drivers that are associated with this piece of hardware: the WIDCOMM Bluetooth Software utility adds a few network cards.

  When you then use an adapter Bluetooth from another provider, driver installation may fail when the chipset you are installing is not compatible with these network belonging to a different chipset drivers.

  I realize the use cases this is not very typical, but it's very confusing when it happens!

  In order to solve the problem, make sure that you uninstall any Bluetooth software from other providers before you install the drivers for your new Bluetooth adapter.

• Re-installing a module using CodeModuleManager...

  Hello

  I am installing a module via the code and I'm having a few problems...

  The module is stored in the file system (/ store/home/user) and when I try to connect using a ContentConnection I get a ClassCastException in loop. If I change this on a FileConnection there is no exception but the methods Manager = CodeModuleManager.createNewModule (len); Returns the value 0 all the time.

  Java component: 4.5.0

  Tested on a Curve 8900 4.6.1.168

  Code:

  conn = (ContentConnection)Connector.open(MYCOD_PATH);
  int len = (int)conn.getLength();
  bais = conn.openInputStream();
  
              if (len > 0) {
                  byte[] data = new byte[len];
                  bais.read(data);
                      handler = CodeModuleManager.createNewModule(len);
  
                      boolean couldWrite = false;
  
                  if (handler != 0){
                       couldWrite = CodeModuleManager.writeNewModule(handler, 0, data, 0, data.length);
                  }
  
                  if (couldWrite){
                       result = CodeModuleManager.saveNewModule(handler, true);  //force override of the existing module
                  }
  

  Any idea?

  Change the Manager to the Manager = CodeModuleManager.createNewModule (len, data, len); and save the module does the job

  Solved!