Installed RAM 16 GB, only 4 GB in BIOS - Precision T5400

Similar Questions

• Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  On Wednesday, March 6, 2013 15:02:32 + 0000, DanielOrtner wrote:

  Why the system writes: installed 4 GB of ram, but usable only 3.6 GB of ram?

  3.6 GB is a very good number - much higher than most people's.

  All versions of Windows 32-bit client (not just XP/Vista/7/8) have a
  Address 4 GB of space (64-bit versions can use much more). It's the
  theoretical upper limit beyond which you cannot go.

  But you can't use the whole address space. Even if you have a
  Address space of 4 GB, you can only use around 3. 1 GB of RAM (and as I
  said, you do much better than that). This is because some of
  This space is used by the hardware and is not available for the operation
  system and applications. The amount you can
  use varies, depending on what hardware you have installed, but can
  range from as little as 2 GB to 3.5 GB. It's usually around
  3. 1 GB.

  Note that the hardware is using the space, not the real address
  The RAM itself. If you have a larger amount of RAM, the rest of the RAM
  goes unused because there is no address to map space to.

• I have 32 GB of RAM installed and win7 uses only 16 GB of it. Why?

  I have 32 GB of RAM installed and win7 uses only 16 GB of it. Why? Thank you in advance.

  Because you're using Home Premium 64-bit?
  You need 'Pro', 'Enterprise' or 'Ultimate' 64-bit running 32GB or more RAM.

  EDIT: Home Premium is limited to 16 GB of RAM.

• Pavilion 500-246: GB of ram it shows only GB why usable?

  I have a Pavilion of 500-246 with 8 GB of ram it shows only 7.18 usable - PLEASE HELP.

  I also try to install a GeForce 8400 GS with 1024 MB ddr3 pci-e 2.0 and cannot operate. If I plug into the video card and that you start the computer NOTHING on the screen at all. S ' PLEASE HELP.

  Hello:

  The memory problem you reported is normal.

  Part of memory has been reserved for some devices of system such as the integrated graphics card.

  The issue of the video card does not...

  I see the product that your PC came with factory-installed W8.1.

  In order to get a video card no HP to work, you need to change 2 settings of the BIOS before installing your video on any PC card that came with W8 or newer version of the factory.

  See this link to change the BIOS settings.

  http://support.HP.com/us-en/document/c03653200/

  Also before you install your video card, you must uninstall the graphics card in Device Manager, check the box uninstall driver, stop, disconnect the PC and install your video card.

  You can do this after you change the BIOS settings.

• HP p6245d gives error beeps after installing RAM

  My HP Pavilion p6245d desktop computer that has a motherboard of Foxconn H-I41-Μatx gives an error beep code of a short and a long beep after that I installed a 2 GB 1333 MHz DDR3 DIMM on it. The code of the RAM is KVR1333D3S8N9 / 2G, manufactured by Kingston. My system has a 2 GB installed RAM origin, but I would like to install an another 2 GB as it says that the motherboard can support up to 4 GB of RAM. I tried to clean the slots, reseatting RAM, reset the CMOS, etc., but not from their work. I also checked through the internet and I found out there a lot of people have the same problem. Hope someone can help on this issue. Thank you!

  P/S: Operating system is Windows 7 Ultimate 32 bit.

  Hello..
  I would like to ask you something.
  
  The motherboard gives you a beep sounds when the original RAM is installed on the other slot?
  
  If your answer is Yes, then the slot is faulty.
  
  It has only two instances when your PC gives you a beep sounds when the memory stick is plugged.
  
  1. when the memory stick (live RAM) is defective.
  2. his slot memory on the motherboard that is defective.
  
  Find a stick of memory work on all locations on the motherboard. And mark that on which working memory is to give tone to the PC.
  
  It would prove the functionality of your memory locations.
  
  If you have any other questions or if this does not correct the problem, ANSWER.

• 32 GB of Ram, computer upgrade only makes a buzzing sound

  I bought a W541 with 4 GB of ram and 1 750gig HD with the intention to move the ram to 32 GB and 2 hds in raid installation myself.

  After that I got the computer I discovered that if I don't order it with RAID would not support it, so I ordered another one of the same computer with RAID to replace. While I was waiting for the replacement I installed ram into the computer and it worked fine.

  Now, I have the new computer, the only difference is that it has the RAID chip and that works fine, but when I installed the RAM that the computer would do when you activated it was make a high pitch buzzing. I thought that maybe he had a static shock while I put me in service so I sent for another 32 GB kit.

  Today, the new kit has come and it's the same thing, does everything the computer is to make a high-pitched hum.

  Any ideas?

  TL; DR: W541 with raid not even post with upgrade ram 32.

  I bought the G.Skill Ripjaws F3-1600C9Q-32GRSL 1.35v, but that shouldn't matter that it worked on the first computer.

  They are all should work, so it must be your system. Dial the 1-800-426-7378

• computer laptop dv6-612tx of hppavilion: size of the installed ram

  I am Agnes... .i am using a computer hp pavilion dv6-612tx laptop... I have a size of ram of 4 GB of origin with the product... but today, recently I gave the lappy to a store aimed a cleaning after I got my lappy when I see the system information in my computer that I could see that the installed ram is 2.45 only...? My question is will show 4 GB ram ram of 4 GB installed or 2.45 only? Please tell me quickly

  Hello @Hemanth17,

  Welcome to the HP Forums!

  I read your post about the size of the memory installed showing incorrectly on your dv6612tx Pavilion laptop and wanted to reach out to you.

  At the right amount showing before you had the system cleaned? What's the memory installed value that is incorrect or available memory?

  If the system displays 4GB but 2.54 GB usable, the system recognizes that the memory is installed, but retains little memory for the physical operations.

  It is possible that the maximum memory is enabled. To change this, you need to go into the System Setup and check the Advanced tab startup options.

  You can also try the tests for a hardware problem or remove and reinstall the memory using the procedure described in the Service Manual (page 53) If you feel that there is a problem of physics with the memory.

  Please let me know how it goes. If this helps you to find a solution, please click on the button accept as Solution down below in this message.

  Thank you!

• I installed RAM from 1 GB to 8 properties but system says 3.5 GB.

  I have a xw4400 workstation HP with Windows XP and I installed RAM from 1 GB to 8 but properties system indicates 3.5 GB. Why do we say not that there are 8GB?

  If you are running win XP 32-bit, it cannot "see" more than 4 GB, your video card is to eat the rest.  Only way to use the 8 GB is upgraded to 64 - bit
  
  If you have 64-bit check the setting of memory max msconfig.sys (not sure if it is called the same in XP, I used it for a decade)

• I have an office of X 3400 with 4 K RAM. Lately only 2 k of RAM is recognized

  I have an office of X 3400 with 4 K RAM. Lately only 2 k of RAM is recognized. The result is that it slows it down for analysis. No idea why and what can done eb to solve the problem?

  By the way, he used to recognize the 4K of RAM. The operating system is WIndows 7.

  Without any intervention from me someday she recogninzed 4 GB and the next day he returned to 2 GB.

  So I checked the bios and recognized 2 GB. Then I opened the case and found that memory sticks to be securely installed, but also a lot of dust near the fan. I sucked inside and he acknowledged the 4GB since then. It could have been the heat caused by the thick dust layer and one memory sticks are more sensitive to heat than others.

• I installed 20 GB memory - only 16 13 GB / showing in Premiere Pro - any help?  (Care and pictures below)

  I installed 20 GB memory - only 13 GB showing in Premiere Pro - any help?

  

  (Windows 7 64 bit - map Quadro 4000 - 20 gb DDR3 RAM PNY) I doubled checked with SPECCY that something was wrong

  

  Upgrade to Windows 8, 8.1, or Windows 7 Professional.

  In this case I suggest you install 6 x 4 GB sticks to bring the total up to 24 GB, instead of 4 x 4 GB more 2 x 2 GB you have now. Mixture of different sticks (2 and 4 GB) in the same bank of memory is not optimal. Also take a good look at your cooling. 60 degrees for a CPU under heavy load is ok, but if it was inactive, it is very high. The Quadro is also quite warm, especially if shooting Speccy was made so that almost inactive.

• Pre-installed RAM in a R60

  I bought my R60 about two years, with 1 GB of pre-installed RAM. Is there a way to check how much RAM is in each Bay without opening the device? (i.e. 512MBx2, one in each 1 GB, with an open Bay or Bay;)

  Well, you really don't fix the RAM sticks... just replace them.

  Even though I already know that some people would disagree... but that's how this issue is treated in most cases.

  I hope this helps.

• Complete package sotware not install Center solutions but only base drivers

  I just bought a Photosmart 7520 printer all-in-one.

  PS7520_1315.exe is the software that I downloaded and installed, but it provides only the basic driver and not the HP Solution Center I used to have for my old printer. I tried to find out what I didn't wrong had no idea. It should provide the whole package, but it does not work. The print function is OK when it is used from the dashboard printers but I prefer to use the software. CAB anyone help?

  Thanks for all your efforts Dragon fur

  The problem has been resolved by the local HP support center.

  It had to do with compatibility issues.

  I'm under Win 8.1 improved to win 8, Windows 7 upgrade. This seems to be a recipe for trouble in this area, although it should not be.

  When the helpdesk began their exe remote file on their site that it worked and in a mysterious way 8.1 Win on my office agreed and gave up the resistance against the execution of this application.

  Thought it might be useful to you, just in case...

  Once again thank you for everything and a lot of success!

• How to install RAM

  Hello

  I have a HP Pavilion elegant book 14 b 010 - we and it came with 4 GB of ram expandable to 8 GB. I have a new ram of 4 GB ready to install, but the back of the computer does not come off. For theis particular model, you know how to install RAM?

  Hi g3,.

  Rats.  If you can get your laptop to a local repair shop, ask how much it will cost you for having done that.

  Be aware of your warranty. do not take the computer in an authorized shop.  The procedure is simple for a trained technician to do this kind of thing, and the cost should not be prohibitive.

  Compare the benefits that you will get the upgrade against a time cost to achieve.

  For more security, have backups of your data to an external source before doing anything of this nature, if you do the work yourself OR you send/take the system to someone else.

  If you have not done your recovery disc, it would be a great time to do so!

  Creation of recovery disks or saving a recovery Image on a USB drive (Windows 8)

  HP - backup of your files (Windows 8) computers

  Good luck!

• How to get my serial number for Acrobat DC std to install? I have only the number of contract!

  How to get my serial number for Acrobat DC std to install? I have only the number of contract!

  Hello

  You can find serial number here sign in French - Adobe ID . Please make sure you sign in with your Adobe under which you purchased Adobe Acrobat DC Standard ID.

  See this KB doc for help: find the serial number of your product Adobe quickly

  Let us know if you need help.

  Kind regards

  Meenakshi

• I installed Photoshop. But it was a misstake. He has been lying to install ID and have only. I want to uninstall the Photoshop. Can I do it myself?

  I installed Photoshop. But it was a misstake. He has been lying to install ID and have only. I want to uninstall the Photoshop. Can I do it myself?

  Hello

  You can uninstall Photoshop by reference not to the following link

  Uninstall or remove Adobe Creative Cloud applications